TrueSight Infrastructure Management Server system requirements
The TrueSight Infrastructure Management Server can be installed on the following operating systems:
Hardware requirements
Note
(Applicable to small and medium environments only) The installer validates the system to check if the following system requirements are met. If your target computer does not meet these requirements, you cannot proceed with the installation (or upgrade).
However, in a non-production environment, you can skip the system requirements validation with the -J MINIMAL=true
parameter. For more information, see the installing or upgrading instructions.
Infrastructure Management server requirements
With the embedded SAP SQL Anywhere database
Environment | Component | Requirement |
---|---|---|
Small | CPU | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 16 GB | |
Storage | 200 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB | |
Medium | Platform | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 32 GB | |
Storage configuration | 300 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB | |
Large | Platform | 8 vCPU; Frequency 2.6 GHz and above |
RAM | 48 GB | |
Storage configuration | 600 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB |
With an external Oracle database
Environment | Component | Requirement |
---|---|---|
Small | CPU | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 16 GB | |
Storage | 30 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB | |
Medium | Platform | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 24 GB | |
Storage configuration | 50 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB | |
Large | Platform | 8 vCPU; Frequency 2.6 GHz and above |
RAM | 40 GB | |
Storage configuration | 100 GB 15000 RPM drive or a tier 1 SAN storage (2 to 4 Gbps SAN dedicated channel) | |
Available swap file size | 8 GB |
Oracle database server requirements
Environment | Component | Requirement |
---|---|---|
Small | Platform | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 16 GB | |
Storage configuration | 170 GB for the database | |
Medium | Platform | 4 vCPU; Frequency 2.6 GHz and above |
RAM | 32 GB | |
Storage configuration | 250 GB for the database | |
Large | Platform | 8 vCPU; Frequency 2.6 GHz and above |
RAM | 32 GB | |
Storage configuration | 500 GB for the database |
Operating system requirements
Microsoft Windows
Component | Requirement |
---|---|
User Rights | Administrative privileges |
Supported versions of Microsoft Windows | Microsoft Windows 2019
Microsoft Windows 2016
Microsoft Windows 2012
Microsoft Windows 2008
Note: For Microsoft Windows 2008 and later, User Access Control must be disabled. |
Port availability | The following ports should be available: 7, 80, 443, 1099, 1100, 1827, 1828, 1851, 2638, 3084, 3115, 3182, 3183, 8005, 8008, 8009, 8093, 8080, 9149, 12123, 12124, 12126, 12130, 12134, 12141, 15000, and 45000. For the list of Infrastructure Management components that use these ports and changing the default port number, see Network port schematics for Infrastructure Management. |
Linux
Component | Requirement |
---|---|
User Rights | root privileges To use non-root privileges, you need to perform some configurations. For more information, see Preparing to install Infrastructure Management. Note: Umask must be set to 022. |
Supported versions of Linux |
|
Port availability | The following ports should be available in listen mode: Note: Port 80 must be available for installing the Apache web server. If any other application is using the port, change the port allocation to make the port 80 available for TrueSight Infrastructure Management installation. On the system where you want to host the TrueSight Infrastructure Management Server or the Integration Service, verify the TCP control port (port 80) is available by running the following command from the command line:
|
Temporary disk space (/tmp) | 1 GB with read/write privileges |
File descriptor | 16096 |
Maximum number of processes | 4096 |
Red Hat subscription
The product requires some additional libraries to be present on the system (see list below).
The preferred method to add any missing libraries is to use the yum command to fetch the necessary library packages from the RHN (Red Hat Network) repository via the Internet. To use this method, a Red Hat subscription is needed. Register the system by clicking System >Administration > Red Hat Subscription Manager in the menu on the server itself. After registering the system, you can use yum install
to download and install the required libraries from the RHN.
X Windows requirement
If you are not installing TrueSight Infrastructure Management silently, you must install X Windows.
On the Red Hat Enterprise Linux terminal, type yum grouplist
and check that X Window System is listed. If not, then run yum groupinstall 'X Window System'
to install the necessary packages.
Required libraries
Ensure that the following libraries are present to install TrueSight Infrastructure Management Server. To install the libraries, the following commands can be used.
Library | Command to install the library on RHEL | Command to install the library on SUSE |
---|---|---|
libXtst (64-bit) | yum install libXtst.x86_64 libXtst-1.0.1-3.1 libX11-devel-1.0.3-11.el5 | N/A |
glibc (32-bit) glibc (64-bit) |
glibc-devel-2.5-65 | zypper install glibc-32bit glibc |
libstdc++ (64-bit) | yum install libstdc++.x86_64 | zypper install libstdc++ |
compat-libstdc++-33 (64-bit) | yum install compat-libstdc++-33.x86_64 | zypper install libstdc++33 |
pam (64-bit) | yum install pam.x86_64 | zypper install pam |
libfreebl3.so | yum install libfreebl3.so | N/A |
Notes
- If an error occurs while installing a 32-bit library, try rerunning the install command with both 32-bit and 64-bit versions of the library. For example, y
um install glibc.i686 glibc.x86_64
(RHEL) orzypper glibc-32bit glibc
(SUSE). - After installing the libraries, check that the libraries are not corrupted.
- yum check (Red Hat Enterprise Linux)
- zypper verify (SUSE Linux)
- BMC products are certified for use on supported operating system versions. BMC does not explicitly test for OS patches/updates that are released after a BMC product is released.
- BMC products should work fine with minor updates to these supported operating systems. For assistance, please contact BMC Customer Support.
Related topic
Hardware requirements to support small, medium, and large environments
Comments
Log in or register to comment.