This following tables provide information about ports that can be configured only after the installation of Infrastructure Management.  For information about ports that can be configured during the installation of Infrastructure Management, see Ports that can be configured when installing Infrastructure Management.

Infrastructure Management ports

Port

Process

Properties

Default

Procedure to secure port

Multi-homed computer setup

2638

Database Server

pronet.api.database.hostname
(installationDirectory/pw/custom/conf/pronet.conf)

127.0.0.1

Set the property value to 127.0.0.1, if it is not already set to that value. This prevents the database server from being accessed from other servers for reporting.

Set the IP address of the required server as the value of the property.

12124

Local Agent

pronet.apps.agent.localhostaddress
(installationDirectory/pw/custom/conf/pronet.conf)

127.0.0.1

Internal process

Set the IP address of the required server as the value of the property. The port is not required by an external computer.

15000

Rate

pronet.rate.hostIp
(installationDirectory/pw/custom/conf/pronet.conf)

127.0.0.1

Internal process used by JServer; secured by default

Port not required by an external computer.

9149

JServer Event Server

pronet.jserver.event.hostIp
(installationDirectory/pw/custom/conf/pronet.conf)

127.0.0.1

Internal process used by JServer; secured by default

Port not required by an external computer.

12141

Log Server

pronet.apps.logging.logServer.hostname
(installationDirectory/pw/custom/conf/pronet.conf)

127.0.0.1

Internal process; secured by default

Port not required by an external computer.

8093

JBoss JMS Server

Note

Before changing the JBoss JMS Server port information, delete the TrueSight Infrastructure Management Server from the TrueSight Presentation Server and add it back after making the port information changes.

(Microsoft Windows)

  1. Use the following command to stop TrueSight Infrastructure Management:
    pw sys stop
  2. In the installationDirectory\pw\custom\conf\pronet.conf file: 
    1. Change the value of the pronet.jboss.jms.port property to the new port number
    2. Add pronet.jboss.jms.port.cs property and update it with the new port number
  3. In the \pw\wildfly\standalone\deployments folder:
    1. Open the activemq-rar.rar file and extract the amq-broker-config.xml file.
    2. Take a backup of the amq-broker-config.xml file.
    3. In the amq-broker-config.xml file, update the URI attribute of transportConnector property to the new port number:
       

      <transportConnector name="bppm-jms-broker-tcp-conn" 
        uri="tcp://0.0.0.0:8093?
        transport.useInactivityMonitor=false"/>
      </transportConnectors>
    4. After the change, save amq-broker-config.xml the file and add it to the activemq-rar.rar file in the \pw\wildfly\standalone\deployments folder again.
  4. In the \pw\wildfly\standalone\deployments folder:
    1. Take a backup of the amqbootstrap.sar file outside of the current directory.
    2. Open the amqbootstrap.sar file and extract the jboss-service.xml file that is located in the amqbootstrap.sar\META-INF directory.
    3. In the jboss-service.xml file, update the BrokerPort attribute to 8094. The default is 8093, which is shown below:
      <attribute name="BrokerPort">8093</attribute>
    4. Save the jboss-service.xml file and add it to the amqbootstrap.sar file in the amqbootstrap.sar\META-INF location, in the \pw\wildfly\standalone\deployments directory.
  5. Use the following command to start TrueSight Infrastructure Management:
    pw sys start
  • (Linux or Solaris)

    1. Use the following command to stop TrueSight Infrastructure Management:
      pw sys stop
    2. In the installationDirectory/pw/custom/conf/pronet.conf file:
      1. Change the value of the pronet.jboss.jms.port property to the new port number 
      2. Add pronet.jboss.jms.port.cs property and update it with the new port number
    3. In the \pw\wildfly\standalone\deployments folder:
      1. Open the activemq-rar.rar file and extract the amq-broker-config.xml file.
      2. Take a backup of the amq-broker-config.xml file.
      3. In the amq-broker-config.xml file, update the URI attribute of transportConnector property to the new port number:

        <transportConnector name="bppm-jms-broker-tcp-conn" 
          uri="tcp://0.0.0.0:8093?
          transport.useInactivityMonitor=false"/>
        </transportConnectors>
      4. After the change, save amq-broker-config.xml the file and add it to the activemq-rar.rar file in the \pw\wildfly\standalone\deployments folder again.
    4. Change the following reference of JMS Server port in /pw/pronto/bin/startdwhouse script file to the new port number

      $ret = system 
       "$ENV{'PRONTO_HOME'}/bin/runjavascripts.PortCheck  8093 300 
        1  > $LOGFILE 2>&1";
    5. In the \pw\wildfly\standalone\deployments folder:
        1. Take a backup of the amqbootstrap.sar file outside of the current directory.
        2. Open the amqbootstrap.sar file and extract the jboss-service.xml file that is located in the amqbootstrap.sar\META-INF directory.
        3. In the jboss-service.xml file, update the BrokerPort attribute to 8094. The default is 8093, which is shown below:
          <attribute name="BrokerPort">8093</attribute>
        4. Save the jboss-sesrvice.xml file and add it to the amqbootstrap.sar file in the amqbootstrap.sar\META-INF location, in the \pw\wildfly\standalone\deployments directory.
    6. Use the following command to start TrueSight Infrastructure Management:
      pw sys start

 

Internal process; secured by default

Port not required by an external computer. The TrueSight Infrastructure Management Servers use this port to communicate with the TrueSight Presentation Server.

1100

JBoss JNDI

Notes

  • Take a back up of all the files before you add or change the port numbers in them.
  • Before changing the JBoss JMS Server port information, delete the TrueSight Infrastructure Management Server from the TrueSight Presentation Server and add it back after making the port information changes.
  • In the In the installationDirectory\pw\custom\conf\pronet.conf file, add the value for JBoss JNDI port as shown below:

    pronet.jndi.port=1100
    java.naming.provider.url=http-remoting://localhost:1100
    pronet.ps.JNPServers=localhost:1100
  • In the installationDirectory\pw\wildfly\standalone\configuration\standalone-full.xml file, change the JBoss JNDI port value to the new port number. 

    <socket-binding
    name="http" port="${jboss.http.port:1100}"/>
  • In the installationDirectory\pw\server\etc\pserver.conf file, change the JBoss JNDI port value to the new port number.

    JNPServers=<hostname>:1100
  • In the installationDirectory\pw\server\etc\pclient.conf file, change the JBoss JNDI port value to the new port number.

    JNPServers=<hostname>:1100

 

 

 

0.0.0.0

Set the property value to 127.0.0.1. If the BMC Atrium CMDB is integrated with Infrastructure Management and you change this property, then the BMC Impact Model Designer can not communicate with the publishing server.

Port not required by an external computer.

Integration Service ports

Port

Process

Procedure to configure the port

3183

Integration Service listens for the services. Used in a failover configuration.

  • Using the command line

    PatrolAgent -integrationservice tcp:<IntegrationServiceHost>:<StagingAdapterPort> -p <PATROLAgentPort> -km <KM_to_Load>
    

    where,

    • <IntegrationServiceHost> is the system in which the Integration Service is running
    • <StagingAdapterPort> is the port number that the PATROL Agent registers automatically with the Integration Service. The default port number is 3183.
    • <PATROLAgentPort> is the port number of the PATROL Agent. The default port number is 3181.
    • The TKM must either be loaded or preloaded.
  • Using the environment variable
    Run the following command to set the INTEGRATONSERVICES environment variable:

    set INTEGRATIONSERVICES=tcp:<Integration Service Host>:<StagingAdapterPort>

    where, PROXYSERVERS is the environment variable.

  • Using the PATROL Configuration Manager rule
    For information about PATROL Configuration Manager (PCM), see the PATROL Configuration Manager User Guide and BMC Performance Manager Consoles Release Notes

    To configure the PATROL Agent using the PCM rule, run the following command:

    "/AgentSetup/integration/integrationServices" = { REPLACE="tcp:<IntegrationServiceHost>:<StagingAdapterPort>"}

    Note

    You can also change the Staging Adapter port number using the administration console.

PATROL Agent to Integration Service ports

Port

Process

Procedure to configure the port

8005

Used by JServer to shut
down the Apache Tomcat server.

Change the port number in the appropriate files for your operating system:

  • (Microsoft Windows): pw\pronto\conf\pronet.conf
    and pw\pronto\conf\jserv.properties
  • (Linux or Solaris): tomcat/conf/server.xml

8009

Used by the Tomcat server to connect to Apache

Change the port number in the appropriate files for your operating system:

  • (Microsoft Windows): pw\pronto\conf\pronet.conf and pw\pronto\conf\jserv.properties
  • (Linux or Solaris): tomcat/conf/server.xml

8093

JMS Server port

Change the value of the pronet.jboss.jms.port property to the new port number in the appropriate files for your operating system:

  • (Microsoft Windows): pw\custom\conf\pronet.conf and pw\jboss\server\minimal_jms\deploy\activemq-ra.rar@\amq-broker-config.xml
  • (Linux or Solaris):
    pw/jboss/server/minimal_jms/delpoy/activemq-ra.rar@/
    amq-broker-config.xml

9149

JServer port

  1. In the \pw\custom\conf\pronet.conf file, change the value of the pronet.jserver.event.port property to the new port number.
  2. Restart the system by running the  pw system start command.

12123

Agent Controller listens to the JServer on this port

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.apps.agentcontroller.port property to the new port number.
  2. Restart the system by running the pw system start command.

12130

CheckPoint Monitor port used to receive log messages.

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.apps.ckpmon.lea.listenport property to the new port number.
  2. Restart the system by running the pw system start command.

12134

TCP port that is used for communication between the Agent Controller and the Apache server for the agent. Communication is initiated when the Agent Controller starts.

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.ipc.proxy.controllerconnport property to the new port number.
  2. Restart the system by running the pw system start command.

12141

Log Server port

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.apps.logging.logServer.port property to the new port number.
  2. Restart the system by running the pw system start command.

15000

Connects the Agent Controller to the Rate process.
The Rate process passively listens on port 15000 until the Agent Controller initiates contact.

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.rate.port property to the new port number.
  2. Restart the system by running the pw system start command.

45000

Message Server port

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.apps.messageserver.port property
    to the new port number.
  2. Restart the system by running the pw system start command.

Cell and Integration Service ports

The following table lists the other ports that you can configure only after the installation of  Infrastructure Management:

PortDescriptionProcedure to configure the port
1827Used by the Central Monitoring Administration cell to accept client connections
  1. If the cell is running, stop the cell by entering the following command: mkill -n cell_name
  2. Open the mcell.dir file and change the cell port to the new port number. You must change the cell port in the mcell.dir files of all the components (cells, integrations, and so forth) that have to connect to that cell.
  3. Restart the cell.
1828Used by the cell to accept client connections
  1. If the cell is running, stop the cell by entering the following command: mkill -n cell_name
  2. Open the mcell.dir file and change the cell port to the new port number. You must change the cell port in the mcell.dir files of all components (cells, integrations, and so forth) that have to connect to that cell.
  3. Restart the cell.
1851Used as a gateway from an embedded cell to the Infrastructure Management Server
  1. Update the new changes on mcell.dir.
  2. Ensure that the cell is running.
  3. Restart TrueSight Infrastructure Management server.
  4. Restart BMC Event Adapter.
12126Agent Controller call back port that is used by the Integration Service to send data back to the Infrastructure Management Server

Note

Any changes to the Agent Controller call back port configuration must be made on all the Integration Services.

  1. In the /pw/custom/conf/pronet.conf file, change the value of the pronet.apps.agent.cntl.port property to the new port number.
  2. Restart the system by running the pw system start command.
  3. Repeat for all Integration Services.
  4. Restart the Integration Service.
Was this page helpful? Yes No Submitting... Thank you

6 Comments

  1.  

    1.  

  2.  

    1.  

  3.  

© Copyright 2013-2017 BMC Software, Inc.
© Copyright 2013-2017 BladeLogic, Inc.
Legal notices