Messages BMCAFI000500 through BMCAFI000599
This table includes messages for the BMC AMI Datastream for IMS product.
Oops, it seems that you need to place a table or a macro generating a table within the Table Filter macro.
The table is being loaded. Please wait for a bit ...
| Number | Description |
|---|---|
| BMCAFI000500E | Severe error in routine routine name, error code=nnn DESCRIPTION: BMC AMI Datastream for IMS has encountered a severe error in the specified routine. The error code is identified. The system responds based on the error code. USER ACTION: Contact BMC Support with the error message information and system dump if available. |
| BMCAFI000501E | BMC AMI Datastream for IMS emergency cleanup in control DESCRIPTION: BMC AMI Datastream for IMS has encountered an ABEND in module AFICTL10 and is attempting to recover from the ABEND situation. USER ACTION: Contact BMC Support with the error message information and system dump if available. |
| BMCAFI000502E | BMC AMI Datastream for IMS emergency cleanup complete, rc=return code DESCRIPTION: BMC AMI Datastream for IMS emergency cleanup from the error situation is completed , the ABEND situation is allowed to continue if necessary. USER ACTION: Contact BMC Support with the error message information and system dump if available. |
| BMCAFI000503E | Another server jobname server_id is already connected to imsid. DESCRIPTION: Another BMC AMI Datastream for IMS server has connected to the indicated IMS. This server will shut down to prevent corruption of control blocks. USER ACTION: None |
| BMCAFI000504E | SDUMP successfully taken DESCRIPTION: System dump of the BMC AMI Datastream for IMS server address space has completed successfully. USER ACTION: Contact BMC Support with the error message information and system dump. |
| BMCAFI000505E | A partial dump was taken. Out of storage RC=04 DESCRIPTION: The system dump processing was attempted but due to storage shortage, only a partial dump was created USER ACTION: Contact BMC Support with the error message information and system dump, even if it is only a partial dump. |
| BMCAFI000506E | Unable to take SDUMP. RC=08 DESCRIPTION: An SDUMP command was issued but could not complete due to a system problem or installation configuration USER ACTION: Contact your systems programmer to find out why the system dump could not be taken and take corrective action. |
| BMCAFI000507E | Invalid command command text DESCRIPTION: An invalid command was issued. USER ACTION: Correct the command syntax and try again. |
| BMCAFI000508E | Command command text parameter error DESCRIPTION: An invalid command parameter was issued. USER ACTION: Correct the command syntax and try again. |
| BMCAFI000509E | Server jobname server_id is already connected to imsid. Force connection? (Y/N) DESCRIPTION: A server was already connected; verify if forcing the connection is required. USER ACTION: Reply Y to force server connection. The other connected server will shut down. |
| BMCAFI000510E | BMC AMI Datastream for IMS Server version not compatible with AMI DE in IMS DESCRIPTION: A server attempted to connect to IMS where the BMC AMI Datastream for IMS level is not compatible. USER ACTION: Upgrade the server or IMS so that both versions match. |
| BMCAFI000511E | BMC AMI Datastream for IMS Too many DB FILTER fields in DD DBFILTER. Max allowed number DESCRIPTION: Too many DB filters were specified in the DBFILTER. Reduce the number used. USER ACTION: Modify the DBFILTER member to use less number of filter parameters. |
| BMCAFI000520E | This IMS release is not supported by BMC AMI Datastream for IMS DESCRIPTION: An error occurred during environmental setup in the IMS control region initialization. USER ACTION: Contact BMC Support. |
| BMCAFI000521E | Unable to initialize, RC=nn. BMC AMI Datastream for IMS is inactive DESCRIPTION: This IMS release is not supported by BMC AMI Datastream for IMS. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support with message and return code information. |
| BMCAFI000522E | Logic error nn in AFIXHLGx DESCRIPTION: An error occurred during environmental setup in the IMS control region initialization. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support with message and return code information. |
| BMCAFI000523E | Unable to allocate work area for initialization DESCRIPTION: An error occurred during environmental setup in the IMS control region initialization, as AFIXINTx could not get the necessary storage to initialize. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support with message and return code information. |
| BMCAFI000524E | Logic error in AFIVLRPn DESCRIPTION: An error occurred during processing in the IMS control region initialization. Required control blocks were not present at entry to log record processing. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support with message and return code information. |
| BMCAFI000525E | Load of BMC AMI Datastream for IMS initializer failed DESCRIPTION: An error occurred during processing in the IMS control region initialization. Required control blocks were not present at entry to log record processing. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Check to make sure you have the BMC AMI Datastream for IMS load library in your IMS control region STEPLIB. Contact BMC Support with message and return code information. |
| BMCAFI000526E | BMC AMI Datastream for IMS password module not found DESCRIPTION: Missing Trial or Permanent password for BMC AMI Datastream for IMS. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support to obtain the password. |
| BMCAFI000527E | Current CPU has not been licensed to BMC AMI Datastream for IMS DESCRIPTION: The permanent password for BMC AMI Datastream for IMS is not valid. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support to obtain the password. |
| BMCAFI000528E | BMC AMI Datastream for IMS function suspended. DESCRIPTION: BMC AMI Datastream for IMS function suspended. Processing continues without BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support to obtain the password. |
| BMCAFI000529E | BMC AMI Datastream for IMS trial period has expired. DESCRIPTION: BMC AMI Datastream for IMS trial period has expired. Processing continues withou BMC AMI Datastream for IMS being active. USER ACTION: Contact BMC Support to obtain the password. |
| BMCAFI000530E | BMC AMI Datastream for IMS password expiration text. DESCRIPTION: This is product password expiration information. USER ACTION: None |
| BMCAFI000531E | BMC AMI Datastream for IMS unable to allocate workarea for termination DESCRIPTION: BMC AMI Datastream for IMSwas unable to allocate a USER ACTION: Contact BMC Support to report this error situation. |
| BMCAFI000532E | BMC AMI Datastream for IMS abend intercepted DESCRIPTION: BMC AMI Datastream for IMS has abended, and recovery will USER ACTION: Contact BMC Support with abend information and dump if created. |
| BMCAFI000533E | BMC AMI Datastream for IMS ABEND recovery proceeding with retry DESCRIPTION: BMC AMI Datastream for IMS has entered recovery from an IMS ABEND situation and attempting retry. Processing continues if retry is successful. USER ACTION: Contact BMC Support if retry or recovery is unsuccessful. |
| BMCAFI000534E | BMC AMI Datastream for IMS collection suspended due to ABEND DESCRIPTION: BMC AMI Datastream for IMS record collection has been USER ACTION: Contact BMC Support with information about the ABEND and the dump file if available. |
| BMCAFI000535E | BMC AMI Datastream for IMS percolating ABEND to next level DESCRIPTION: BMC AMI Datastream for IMS has entered an ABEND situation and USER ACTION: Contact BMC Support with ABEND information and the dump file. |
| BMCAFI000536E | BMC AMI Datastream for IMS Buffer error encountered, collection DESCRIPTION: Due to the buffer error, BMC AMI Datastream for IMS USER ACTION: Contact BMC Support with the error information. You may wish to increase number of buffers. |
| BMCAFI000537I | BMC AMI Datastream for IMS Recovery successful DESCRIPTION: BMC AMI Datastream for IMS recovery from an IBM IMS ABEND was USER ACTION: Contact BMC Support with error information and the dump file, if created. |
| BMCAFI000538E | BMC AMI Datastream for IMS Error processing request DESCRIPTION: BMC AMI Datastream for IMS server request could not be processed by the IMS data collector. USER ACTION: Contact BMC Support with error information. |
| BMCAFI000539E | Unable to detach the 64-bit STORAGE. IARV64 RET: return_code RSN: reason_code DESCRIPTION: Attempt to detach the 64-bit storage failed. The reason code and return code are from the IARV64 macro. USER ACTION: Contact BMC Software. |
| BMCAFI000540E | BMC AMI Datastream for IMS initialization failed, RC=return_code DESCRIPTION: BMC AMI Datastream for IMS has failed to initialize. USER ACTION: Contact BMC Support with error information and return code.. |
| BMCAFI000541E | BMC AMI Datastream for IMS unable to initialize Database Filter filter_id DESCRIPTION: An error was encountered during the load of the Database Filter module. Database tracking will be inactive. USER ACTION: Ensure that the module AFIZiiii (where iiii is the filter_id) is |
| BMCAFI000550I | BMC AMI Datastream for IMS Unable to free ESTAE, RC=return_code DESCRIPTION: BMC AMI Datastream for IMS error was encountered freeing an existing ESTAE environment. return code number is a return code that qualifies the error. USER ACTION: Contact BMC Support with error information and the return code. |
| BMCAFI000551I | BMC AMI Datastream for IMS Unable to establish ESTAE, RC=return_code DESCRIPTION: BMC AMI Datastream for IMS error was encountered establishing USER ACTION: Contact BMC Support with error information and the return code. |
| BMCAFI000552E | BMC AMI Datastream for IMS SERVER PARM INVALID DESCRIPTION: An error occurred during the parsing of the BMC AMI Datastream for IMS server parameter in JCL PARM=. The PARM= parameter should be a 1-4 character server ID. USER ACTION: Correct the PARM= parameter field and restart the server. |
| BMCAFI000553E | BMC AMI Datastream for IMS SERVER SECOND PARM INVALID DESCRIPTION: An error occurred during the parsing of the BMC AMI Datastream for IMS server parameter in JCL PARM=. The second parameter field should be less than 16 characters. USER ACTION: Correct the PARM= parameter field and restart the server. |
| BMCAFI000554E | BMC AMI Datastream for IMS SERVER THIRD PARM INVALID DESCRIPTION: An error occurred during the parsing of the BMC AMI Datastream for IMS server parameter in JCL PARM=. The third parameter field should be less than 16 characters. USER ACTION: Correct the PARM= parameter field and restart the server. |
| BMCAFI000555E | BMC AMI Datastream for IMS INVALID DBFILTER PARM parametername DESCRIPTION: The DBFILTER parameter is invalid. The previous DB filter will be used. If no previous DB filter was specified, no DB filtering will occur. USER ACTION: Correct the DBFILTER parameter. |
| BMCAFI000560E | ERROR WHILE LOADING OPTIONS DESCRIPTION: An error occurred while loading an options module. USER ACTION: Correct the BMC AMI Datastream for IMS options and retry. |
| BMCAFI000561I | RELOADING PREVIOUS OPTIONS DESCRIPTION: BMC AMI Datastream for IMS options loading failed. An attempt to load a previous options module is in process. USER ACTION: Correct the BMC AMI Datastream for IMS options and retry. |
| BMCAFI000562E | INVALID RECORD OUTPUT TYPES DESCRIPTION: An error occurred while loading the output type. Valid output types are DSN or TCP/IP. USER ACTION: Correct the BMC AMI Datastream for IMS options and retry. |
| BMCAFI000563E | UNABLE TO CONNECT TO TCP/IP ip_address DESCRIPTION: The BMC AMI Datastream for IMS connection to TCP/IP has failed. USER ACTION: Verify the TCP/IP address and PORT are correct in the server options and that the destination server is running. |
| BMCAFI000564E | UNABLE TO DYNALLOC OUTPUT DATASET datasetname RET:return_code RSN:reason_code DESCRIPTION: An error occurred after attempting to allocate a DD name. Return code and reason name are from the DYNALLOC macro call. USER ACTION: Correct the DD input options and retry. |
| BMCAFI000565E | UNABLE TO OPEN OUTPUT DATASET dsname DESCRIPTION: BMC AMI Datastream for IMS was unable to open the specified output dataset specified in the server options. USER ACTION: Correct the data set name and retry. |
BMCAFI000566E | UNABLE TO INITIALIZE FILTER OPTIONS DESCRIPTION: An error occurred while attempting to initialize the Extract List XML data. USER ACTION: Correct the Extract List XML data and retry. |
BMCAFI000567E | BMC AMI Datastream for IMS UNABLE TO INITIALIZE FILTER DESCRIPTION: BMC AMI Datastream for IMS error occurred while attempting to USER ACTION: Contact BMC support with the error information. |
BMCAFI000568E | INVALID SERVER TYPE, IMS/API ONLY VALID TYPES DESCRIPTION: BMC AMI Datastream for IMS error occurred while initializing. USER ACTION: Correct the BMC AMI Datastream for IMS server type in the server |
BMCAFI000569E | UNABLE TO LOAD SERVER OPTIONS DESCRIPTION: BMC AMI Datastream for IMS error occurred while loading an USER ACTION: Correct the BMC AMI Datastream for IMS server options and retry. |
BMCAFI000570E | Unable to obtain storage for AFITTCPS DESCRIPTION: BMC AMI Datastream for IMS error occurred when module AFITTCPS was unable to obtain storage for processing. Processing terminates. USER ACTION: Contact BMC Support with the error message information. |
BMCAFI000571E | AFITTCPS was called with an invalid function code code DESCRIPTION: BMC AMI Datastream for IMS error occurred in module AFITTCPS function code processing. Processing terminates. USER ACTION: Contact BMC Support with the error message information. |
BMCAFI000572E | Invalid TCP Host:Port -host:port DESCRIPTION: An invalid host name or IP address or port number was specified. Processing terminates. USER ACTION: Specify a host name or IP address and port number of a listening TCP port. The port number must be separated from the host name or IP address by a colon. Port number must be between 1 and 65535. |
BMCAFI000573E | UIM API function function_name failed DESCRIPTION: BMC AMI Datastream for IMS error occurred when the specified UIM API function failed. Processing terminates. USER ACTION: Contact BMC Support with the error message information. |
BMCAFI000574E | TCP ERROR MESSAGE:msg_text DESCRIPTION: The formatted error message returned from a UIM API TCP call that failed. Message may be in multiple segments. Processing terminates. USER ACTION: Contact BMC Support with the error message information. |
BMCAFI000575E | Data sent on the TCP channel was not complete - attempting to reconnect channel and resent DESCRIPTION: The number of bytes sent that was returned from the UIM API TCP channel send function was less than requested by the function call. An attempt is made to reconnect the TCP channel and resend the data. USER ACTION: Check that the listening TCP channel port is still enabled on the Host |
BMCAFI000576E | UNABLE TO DYNALLOC FILTER DATASET RET:return_code RSN:reason_code DESCRIPTION: The Extract List data set allocation failed. The return and reason codes are from the DYNALLOC macro. USER ACTION: Verify that the Extract List data set and member exist. |
BMCAFI000577E | UNABLE TO ALLOCATE 64-BIT STORAGE. IARV64 RET: returnCode RSN: reason DESCRIPTION: Attempt to obtain 64-bit storage failed. Reason and return code are from the IARV64 macro. USER ACTION: Verify the "Above the Bar" storage limits (for example, MEMLIMIT). Contact BMC Support with the Return and Reason codes. |
| BMCAFI000578E | Extract buffer overflow, log record sequence_number, type log_code. No fields extracted. DESCRIPTION: There is not enough room in the internal extract buffer for all of the fields to be extracted from the record. Field extraction for the record is skipped. This message will be issued a maximum of 20 times. USER ACTION: Reduce the number of fields to be extracted from this record type. |
| BMCAFI000579E | IDENTIFY FAILED IN API RC=return_code DESCRIPTION: Identify failed for an API call for the indicated IDENTIFY return code. USER ACTION: Contact BMC Software Support. |
| BMCAFI000580E | UNABLE TO OBTAIN STORAGE IN location_name DESCRIPTION: Unable to obtain storage in the indicated location. USER ACTION: Contact BMC Software Support. |
| BMCAFI000581E | RELOAD FAILED FOR USER EXIT AFIUEXIT RET:return_code RSN:reason_code DESCRIPTION: Attempt to reload user exit routine named AFIUEXIT* failed. Reason and return codes are from the LOAD macro. Execution of the user exit routine is skipped. USER ACTION: Ensure that the user exit named AFIUEXIT is in the BMC AMI Datastream for IMS server's STEPLIB and retry reloading of the user exit routine using the command RELUEXIT. |
| BMCAFI000582E | Abend in User EXIT AFIUEXIT DESCRIPTION: An abend occurred in the user EXIT AFIUEXIT. Processing is terminated. USER ACTION: Fix the user exit after analyzing the abend and restart the server. In case of any issues with the input parameters, contact BMC Software. |
| BMCAFI000583E | THE member_name MEMBER IS NOT PRESENT IN THE FILTER DATASET DESCRIPTION: The extract list member was not found in the extract list library allocated with the FILTER DD. No data extraction will occur. USER ACTION: Ensure that the correct extract list member is specified in the server options, and that the member exists in the extract list library. Issue the OPTS command to reload the server options. |
| BMCAFI000584E | Either CZAILOGD or SYSIN DD is missing when records are to be sent to CZAGENT DESCRIPTION: The Send IMS log records to CZAGENT option is selected in the BMC AMI Datastream for IMS server options, but either the SYSIN DD or CZAILOGD DD is not present in the server JCL. Processing continues, but no records will be sent to CZAGENT. USER ACTION: Ensure that both the server DDs are present in the BMC AMI Datastream for IMS server JCL, and then stop and restart the server. |
| BMCAFI000585E | BMC AMI Datastream for IMS internal error while capturing DB Update DESCRIPTION: The BMC AMI Datastream for IMS server failed to acquire the AFIIMS control block when processing the DB update. DB Changes will not be captured by BMC AMI Datastream for IMS. USER ACTION: Contact BMC Support. |
| BMCAFI000586E | SYSPRINT DD is missing which is mandatory for BMC AMI Datastream for IMS DESCRIPTION: A SYSPRINT DD statement is missing from the BMC AMI Datastream for IMS server JCL. This DD is required. Processing terminates. USER ACTION: Ensure that the SYSPRINT DD exists in the server JCL, and restart the server |
| BMCAFI000587E | Server options output dataset: dsname must be DSORG=PS DESCRIPTION: Output data set should be physical sequential. Processing terminates. USER ACTION: Review the server options and ensure the output data set name specified is a sequential data set. |
| BMCAFI000588E | Dataset locate failed for dsname RET:return_code RSN:reason_code DESCRIPTION: An attempt to locate the output data set failed. Processing terminates. USER ACTION: Contact BMC Support. |
| BMCAFI000589E | BMC AMI Datastream for IMS Server options must be upgraded DESCRIPTION: An older version of the server options is in use. The processing terminates. USER ACTION: Upgrade to the newer level of the server options using the BMC AMI Datastream for IMS Edit Server Options panel. |
| BMCAFI000590E | BMC AMI Datastream for IMS Server must be upgraded DESCRIPTION: The server options are at a newer level than the server, and are not compatible with the server. The processing terminates. USER ACTION: Upgrade the BMC AMI Datastream for IMS server. |
| BMCAFI000591E | BMC AMI Datastream for IMS does not have any Source/Destination DESCRIPTION: The server options do not have a source specified. You must specify at least one source and destination in order for the server to receive records. Processing terminates. USER ACTION: Edit the server options to include a source, destination, and an extract list. Restart the server. |
| BMCAFI000592E | BMC AMI Datastream for IMS unable to establish connection with TCP/IP channel DESCRIPTION: The TCP/IP channel could not be created or connected as the Host:Port is inactive. The host and port number are indicated in message BMCAFI000593E. BMC AMI Datastream for IMS makes an attempt to reconnect to the TCP/IP channel five times and then the attempts are stopped. USER ACTION: Verify the TCP channel status. Reload the options using the /OPTS command. |
| BMCAFI000593E | TCP/IP Host:Port DESCRIPTION: Displays the HOST:PORT which is inactive. BMC AMI Datastream for IMS makes an attempt to reconnect to the TCP/IP channel five times and then the attempts are stopped. USER ACTION: Verify the TCP channel status. Reload the options using the /OPTS command. |
| BMCAFI000594E | Reload Options to reestablish the TCP/IP connections DESCRIPTION: For the BMC AMI Datastream for IMS server to re-establish a TCP/IP connection, the server options must be reloaded. Communication with the TCP/IP channel specified in message BMCAFI000593E is stopped. No data is sent to the channel until the connection is re-established. USER ACTION: Verify the TCP channel status. Reload the options using the /OPTS command. |
| BMCAFI000591E | BMC AMI Datastream for IMS does not have any Source/Destination DESCRIPTION: The server options do not have any source specified. You must specify at least one source or destination for the server to receive records. The processing terminates. USER ACTION: Edit the server options to include a source, destination, and an extract list. Restart the server. |
| BMCAFI000592E | BMC AMI Datastream for IMS is unable to establish connection with TCP/IP channel DESCRIPTION: The TCP/IP channel could not be created or connected as the Host:Port is inactive. The host and port number are indicated in message BMCAFI000593E. BMC AMI Datastream for IMS makes an attempt to reconnect to the TCP/IP channel five times and then the attempts are stopped. USER ACTION: Verify the TCP channel status and reload the options using the /OPTS command. |
| BMCAFI000593E | TCP/IP_Host_id : Port_Number DESCRIPTION: Displays the HOST:PORT which is inactive. BMC AMI Datastream for IMS makes an attempt to reconnect to the TCP/IP channel five times and then the attempts are stopped. USER ACTION: Verify the TCP channel status and reload the options using the /OPTS command. |
| BMCAFI000594E | Reload Options to reestablish the TCP/IP connections DESCRIPTION: For the BMC AMI Datastream for IMS server to re-establish a TCP/IP connection, the server options must be reloaded. Communication with the TCP/IP channel specified in message BMCAFI000593E is stopped. No data is sent to the channel until the connection is re-established. USER ACTION: Verify the TCP channel status and reload the options using the /OPTS command. |
Comments
Log in or register to comment.