Messages BMC70300 through BMC70399
Number | Description |
---|---|
BMC70300E | Option(Force) is invalid for attribute(attribute) or obj(object) Explanation: The Force change rule is only available for the VCAT attribute of table space or index objects. User response: Use another change rule option, or correct the attribute and object fields. |
BMC70301E | Name parts must be spaces or asterisk for Force option Explanation: Both the CURRENT and NEW value must be spaces for the Force change rule. User response: Correct the values. |
BMC70302E | Must be spaces for Action Force Explanation: Both the CURRENT and NEW value must be spaces for the Force change rule. User response: Correct the values. |
BMC70303E | DDN2 may not be registered without registering DDN1. Explanation: You specified to register the second copy data set (for example, Copy DDN2) without specifying to register the first copy data set (for example, Copy DDN1). In addition, you might have specified to register the second backup data set (for example, Recv DDN2) without specifying to register the first backup data set (for example, Recv DDN1). User response: Perform one of the following actions to register the first copy data set:
|
BMC70304E | DDN2 may not be specified without specifying DDN1. Explanation: You specified copy or register for the second copy data set (for example, Copy DDN2) without specifying copy or register for the first copy data set (for example, Copy DDN1). In addition, you might have specified copy or register for the second backup data set (for example, Recv DDN2) without specifying copy or register for the first backup data set (for example, Recv DDN1). User response: Perform one of the following actions to specify the first copy data set:
|
BMC70305E | All COPY and RECOVER DDNs must be registered with IBM COPY Explanation: The IBM COPY utility requires that you register all of your primary and backup image copies on your local and remote sites. User response: Perform one of the following actions:
|
BMC70306E | Copy DDN2 may not be registered without Copy DDN1 Explanation: You specified to register the second copy data set (for example, Copy DDN2) without specifying to register the first copy data set (for example, Copy DDN1). User response: Perform one of the following actions:
|
BMC70307E | Copy DDN2 is invalid without Copy DDN1. Explanation: You specified copy or register for the second copy data set (for example, Copy DDN2) without specifying copy or register for the first copy data set (for example, Copy DDN1). User response: Perform one of the following actions:
|
BMC70308E | Recover DDN2 may not be registered without Recover DDN1 register. Explanation: You specified to register the second backup data set (for example, Recv DDN2) without specifying to register the first backup data set (for example, Recv DDN1). User response: Perform one of the following actions:
|
BMC70309E | Recover DDN2 is invalid without Recover DDN1. Explanation: You specified copy or register for the second backup data set (for example, Recv DDN2) without specifying copy or register for the first backup data set (for example, Recv DDN1). User response: Perform one of the following actions:
|
BMC70310E | At least one COPY or RECOVER DDN must be specified. Explanation: You specified not to create an image copy. You must specify copy, or copy and register for the first primary or backup data set. User response: Perform one of the following actions:
|
BMC70311E | Valid values are 1. None, 2. Owner, or 3. Reader. Explanation: You have entered an incorrect value for the Migrate Roshare option or the ROSHARE attribute of a database. User response: Enter Read, Owner, or None. |
BMC70312E | Invalid ROSHARE migrate option. Values are Read, Owner, or None. Explanation: You have entered an incorrect value for the Migrate Roshare option or the ROSHARE attribute of a database. User response: Enter Read, Owner, or None. |
BMC70313E | RECV DDN1 may not be specified without COPY DDN1. Explanation: You specified copy or register for the first backup data set without specifying copy or register for the first copy data set. User response: Perform one of the following actions to specify the first backup data set:
|
BMC70314I | Compare issued return code 1. See diagnostic for messages. Explanation: Return code 1 indicates that Compare did not generate any Change Definition Language (CDL). User response: Check the diagnostic output file for information on why Compare did not generate CDL. |
BMC70315E | Select BMCLOAD/BMCREORG for image copies or register all copies. Explanation: IBM COPY was selected with register NO for all copies. Copies must be registered when you select IBM COPY. User response: Create the copies with the LOADPLUS utility (select BMC Load) or the NGT Copy utility, or select IBM COPY and register all copies. |
BMC70315E.1 | “Copy no register” only valid when “Other utilities should build image copies when possible” selected Explanation: You selected to create a copy of the data set, but not to register it. When you select this option, you must also select to create an image copy by a utility other than the NGT Copy or IBM COPY utility (an inline copy). User response: Select the correct options. |
BMC70315E.2 | BMC AMI Copy or other BMC utilities must be specified to select partition level copies Explanation: You selected to generate partition-level image copies for partitioned table spaces or indexes, but you did not select the BMC AMI Copy utility or the IBM COPY utility. User response: Select the BMC AMI Copy utility or the IBM COPY utility. |
BMC70316E | Nothing included in CDL file. Select at least one CDL element. Explanation: No elements are selected to include in the Change Definition Language (CDL) file. User response: Select an element to include in the CDL file. |
BMC70317E | No Copy Start Force not valid with BMCLOAD - use No Copy Explanation: The BMC Software LOADPLUS utility does not place table spaces in copy pending status. Therefore, forcing access to start a table space is not a valid option. User response: Select the No Copy option. |
BMC70318W | Compare may not be valid Explanation: Compare found that the primary and secondary input types represent a type of comparison that is not typically performed. User response: Inspect the resulting Change Definition Language (CDL) file to be sure you really want to perform the changes described. For information about the types of comparisons that you want to perform and why some combinations of input types are not recommended, see the ALTER and BMC AMI Change Manager for Db2 documentation. |
BMC70319I | No baselines qualify for deletion Explanation: None of the baselines meet the RETAINMAX or DELETEAGE qualification for deletion. User response: No action is required. |
BMC70320I | The selected baselines were deleted Explanation: The baselines qualified by RETAINMAX or DELETEAGE have been deleted. User response: No action is required. |
BMC70321I | Baselines exist referencing the scope rules of this profile Explanation: Baseline profiles with existing baselines reference the scope of this migration profile. You must delete the baselines before you can delete the migrate profile. User response: Delete all baselines with baseline profiles that reference the scope of this migrate profile. |
BMC70322I | No Migrate type WORKIDs selected Explanation: The list of work IDs built from the pattern specified does not contain any migrate-type work IDs. User response: Change the pattern to include migrate-type work IDs, or create a new migrate-type work ID. |
BMC70323I | Report return code is RC(0) Explanation: Report generation was successful. User response: No action is required. |
BMC70324I | Report issued RC(4). Check diagnostics for warnings. Explanation: Warning messages were issued during report processing. User response: Check the diagnostic file for additional information. |
BMC70325E | Report issued RC(8). Check diagnostics for errors. Explanation: Error messages were issued during report processing. User response: Check the diagnostic file for additional information. |
BMC70326E | Report issued RC(returnCode). Check diagnostics for errors. Explanation: Error messages were issued during report processing. User response: Check the diagnostic file for additional information. |
BMC70327E | Protect is invalid if NoBaseline is selected Explanation: When you select the NoBaseline option, you cannot also select the Protect option. Creating a baseline with the NoBaseline option only applies the DELETEAGE and RETAINMAX baseline management functions; a baseline is not actually created. You can only select the Protect option if a baseline is actually created. User response: Select either the NoBaseline or Protect option, but not both. |
BMC70328E | BindAuth invalid unless Bind selected Explanation: You specified the option to include bind authorizations in a migrate worklist, but did not include binds. This combination is invalid. User response: Select Bind or do not select Bindauth. |
BMC70329E | Bind and Rebind cannot both be selected Explanation: You selected the Analysis options Bind and Rebind, but both options cannot be present in the worklist. User response: Select only one of the options. |
BMC70330E | [NAME PART3 LENGTH -] Maximum length is maximumLength for type objectType [AT STATEMENT NUMBER statementNbr: statementText] Explanation: You specified an invalid length for the third part of the object name. More than likely, you specified an object type of FK and a length greater than 128. User response: For Part3 of the name, change the length to the maximum number of characters or less. If running the batch profile process (ACMPROFB), resubmit the job. |
BMC70331I | Profile cannot have locations and must have change rules Explanation: The outbound migrate profile that you specified for the CHANGERULESIN2 keyword contains locations. User response: Specify the name of an outbound migrate profile for CHANGERULESIN2 that contains change rules that can be used to resolve object names and creators. These change rules are applied to CMPIN2 objects before the comparison is performed. |
BMC70332E | An outbound migrate profile specified for CHANGERULESIN2 must contain change rules and must not contain locations. Explanation: An outbound migrate profile that is specified for CHANGERULESIN2 must contain change rules and must not contain locations. None of the profiles found meet these criteria. User response: Choose another profile or create a new one. |
BMC70333I | Cannot END off screen since Migrate Profile is invalid Explanation: The selected Migrate Profile is invalid or contains a wildcard. You cannot exit the screen until you have specified a valid profile name or a blank field. User response: Change the profile name, or specify a blank field. |
BMC70334E | Ixtype must be 1 or 2 Explanation: The valid index types are 1 or 2. User response: Specify one of the values listed in the error message. |
BMC70335E | Subpages must be 1, 2, 4, 8, or 16 Explanation: An invalid subpage has been specified for a Type 1 index. User response: Specify one of the values listed in the error message. |
BMC70338 | SYSOUT class must be a alphanumeric character (A-Z, 0-9) Explanation: The specified SYSOUT class is invalid. The class character must be A through Z or 0 through 9. User response: Change the SYSOUT class to a valid character. |
BMC70339E | Bind option is required with DBRMLIB Selection Explanation: You specified the DBRMLIB option but not the BIND option. User response: Specify BIND with DBRMLIB, or do not specify DBRMLIB. |
BMC70340E | SQLERROR (SQLCode) IN JCL; Press Enter to scan JCL for error Explanation: The JCL Generation component received a negative SQL code from DB2. If Debug is on, the SQL error is displayed as comments in the generated JCL. If Debug is off, comments are not generated. User response: If Debug is off, turn it on, and try the process again. If Debug is on, press Enter to examine the generated JCL to determine what error occurred and what caused the error. Then, correct the error and run the process again. |
BMC70341I | None of the Migrate Profiles Listed Contain Scope Rules Explanation: You have selected the Analysis option Analyze Migrate Profile scope, which requires that a profile contain a scope definition. However, none of the migrate profiles listed contain scope rules. User response: Specify a migrate profile that contains scope rules. |
BMC70342I | Migrate Profile **profile** does not contain scope rules Explanation: You have selected the Analysis option Analyze Migrate Profile scope, which requires that a profile contain a scope definition. However, the migrate profile indicated does not contain scope rules. User response: Specify a migrate profile that contains scope rules. |
BMC70343I | Selected object is invalid for this option Explanation: Some objects do not support certain change rule options. Refer to the online help panels or the ALTER and BMC AMI Change Manager for Db2 documentation for a list of valid change rule options for each object. User response: Specify a different object or option. |
BMC70344E | Valid segsize values are : 4, 8, 12, 16 .............. 64 Explanation: Values for SEGSIZE must be in increments of 4. User response: Specify a valid value for the SEGSIZE. |
BMC70346E | Suppress is invalid for the object/attribute combination. Explanation: Some object and attribute combinations do not support certain change rule actions. Refer to the online help panels or the ALTER and BMC AMI Change Manager for Db2 documentation for a list of valid change rule actions for each object and attribute combination. User response: Specify a different object, attribute, and action combination. |
BMC70349I | Unload from Image Copy only valid for Migrate type workid Explanation: The option to unload from an image copy was specified for an alter-type or receive-type work ID. This option is only valid for migrate-type work IDs. User response: Remove the option to unload from an image copy. |
BMC70350E | IBM or BMC AMI Copy must be specified to use Utility Copy Option 2 Explanation: On the Analysis Image Copy Options panel, if you choose to use other utilities to build image copies as the Utility Copy option, you must specify IBM COPY or BMC AMI Copy as the copy utility. User response: Specify IBM COPY or BMC AMI Copy as the copy utility. |
BMC70354E | Enter DSN for Old Execution JCL dataset Explanation: Execution has terminated incompletely for a worklist. You have indicated that the JCL needs to be rebuilt for restart, but have not specified where the old execution JCL resides. The old execution JCL data set name is required to rebuild JCL for restart. User response: Enter the old execution JCL data set name. |
BMC70355E | Execution JCL and Old Execution JCL have same Dataset Name Explanation: You have specified the same data set name for both the new and old Execution JCL. User response: Specify a different data set name to contain the new JCL. |
BMC70356E | Execution JCL and Batch JCL have same Dataset Name Explanation: You have specified the same data set name for both the Execution and batch JCL. User response: Specify a different data set name for each. |
BMC70357E | Bufferpools are BP0-BP49 or <DEFLT> Explanation: An invalid value was specified for a bufferpool name. User response: Specify one of the values listed in the message text. |
BMC70358E | DSN= dataSetName Explanation: The specified data definition language (DDL) data set was not found. User response: Use the name of an existing data set, or allocate the named data set. |
BMC70359E | DSN=dataSetName Explanation: The specified Change Definition Language (CDL) data set was not found. User response: Use the name of an existing data set, or allocate the named data set. |
BMC70360I.1 | The following options were automatically selected to support worklist parallelism: BMC UNLOAD PLUS, BMC LOADPLUS, BMC AMI Copy, and dynamic SYSRE and COPY data sets. Explanation: The worklist parallelism feature is enabled for the Database Administration solution when the following conditions exist:
User response: No action is required. |
BMC70360I.2 | Worklist parallelism will be disabled because the BMC UNLOAD PLUS and BMC LOADPLUS utilities were not selected. To run the worklist in parallel, return to the previous panel and select these utilities. Explanation: The worklist parallelism feature requires the use of the BMC Software UNLOAD PLUS and LOADPLUS utilities. You selected to enable worklist parallelism, but you did not specify to use these utilities. As a result, worklist parallelism will be disabled. User response: To execute the worklist in parallel, return to the utility options panel and select these utilities. |
BMC70360I.3 | Worklist parallelism will be disabled because the IBM COPY utility was selected. To run the worklist in parallel, return to the previous panel and select a different copy option. Explanation: The worklist parallelism feature requires the use of the NGT Copy utility or no copy utility. You selected to enable worklist parallelism, but then selected to use the IBM COPY utility. As a result, worklist parallelism will be disabled. User response: To execute the worklist in parallel, return to the image copy options panel and select a valid copy option. |
BMC70360I.4 | Worklist parallelism will be disabled because dynamic SYSRE and COPY data sets were not selected. To run the worklist in parallel, return to the previous panel and select these options. Explanation: The worklist parallelism feature requires the use of dynamically allocated SYSRE and COPY data sets. You selected to enable worklist parallelism, but did not select to use the dynamically allocated data sets. As a result, worklist parallelism will be disabled. User response: To execute the worklist in parallel, return to the utility data set options panel and select these options. |
BMC70360I.5 | The following options were automatically selected to support management of LOB data: BMC UNLOAD PLUS, BMC LOADPLUS, and dynamic SYSRE data sets. Explanation: The LOB DATA MOVER program is used to unload and load data contained in large object (LOB) columns for the Database Administration solution when the following conditions exist:
User response: No action is required. |
BMC70360I.6 | Worklist parallelism will be disabled because the Data option was not selected on the Analysis Worklist Command Options panel. To run the worklist in parallel, return to this panel and select the Data option. Explanation: The worklist parallelism feature requires selection of the Analysis override option, Data. Although you selected the Enable worklist parallelism (PARALLEL) option, you cleared the Data option. As a result, worklist parallelism will be disabled. User response: To execute the workist in parallel, return to the Analysis overrides panel and select the Data option. |
BMC70361E | When the Current Value is -1, the New Value in a change rule cannot include <CURRENT> or a calculation. The New Value must be numeric. Explanation: The change rule for the PRIQTY or SECQTY of an object cannot include <CURRENT> or a calculation (operator) for the New Value field when the Current Value field specifies -1. User response: Specify a numeric value for the New Value field. |
BMC70362W | Specification of DYNCOPY will override UTILCOPY; other utilities will not build image copies. Explanation: You chose to create image copies by using utilities other than the copy utilities (UTILCOPY). However, you also chose to allocate data sets dynamically for the NGT Copy, NGT Recover, NGT Recover IMPORT, and IBM COPY utilities to use when creating image copies (DYNCOPY). As a result, the product ignores the UTILCOPY option, and a copy utility or the NGT Recover for DB2 product creates the image copies. User response: To ensure that utilities other than the copy utilities create the image copies, deselect the option to allocate the data sets dynamically (DYNCOPY). |
BMC70363E | IBM LOAD IS REQUIRED WHEN USING IBM UNLOAD Explanation: You selected to use the IBM UNLOAD utility to unload data. However, you selected the BMC LOADPLUS utility to load the data. When you use the IBM UNLOAD utility, you must also use the IBM LOAD utility. User response: Return to the utility options panel and select the correct utilities. |
BMC70364E | Valid dssize values are: 1,2,4,8,16,32,64 Explanation: While specifying change rules, you specified a DSSIZE for a table space. The valid values are 1, 2, 4, 8, 16, 32, or 64 GB. You also can specify 0 as the Current Attribute Value. User response: Specify a valid DSSIZE for the table space. |
BMC70365E | Valid MAXPARTS values are 1 to 4096 or MAX for New Attribute Value. Explanation: While specifying change rules, you specified an invalid value for the maximum number of partitions (MAXPARTS) for a table space. The valid values are 1 through 4096. You also can specify MAX in the New Attribute Value field. User response: Specify a valid value for MAXPARTS. |
BMC70366E | Old value can only be * or spaces for the specified attribute Explanation: You specified an invalid value for the current value of the SPALTER or SPTYPE attribute for a native stored procedure. Valid values for the current value are blank (spaces) or asterisk (*). User response: For the current value, specify a blank or an asterisk. |
BMC70367E | Value must be ALTER Explanation: You specified an invalid value for the new value of the SPALTER attribute for a native stored procedure. The only valid value is ALTER. User response: For the new value, specify ALTER. |
BMC70368E | Value must be NATIVE Explanation: You specified an invalid value for the new value of the SPTYPE attribute for a native stored procedure. The only valid value is NATIVE. User response: For the new value, specify NATIVE. |
BMC70369E | Value must be ALLOW, DISABLE or DISALLOW Explanation: You specified an invalid value for the current or new value of the DEBUG_MODE attribute for a native stored procedure. Valid values are asterisk (*), ALLOW, DISALLOW, or DISABLE. User response: For the current value, specify *, ALLOW, DISALLOW, or DISABLE. For the new value, specify ALLOW, DISALLOW, or DISABLE. |
BMC70370E | The Change Rule SPALTER operates against all versions of a Stored Procedure. You may not single out any particular version. Explanation: For the SPALTER attribute of a native stored procedure, you specified a value for part 3 of the object name. Part 3 of the name must be blank. The change rule causes the product to use the ALTER PROCEDURE statement to create all versions of the native stored procedure. User response: For part 3 of the name, specify a blank. |
BMC70371E | <ACTIVE> is an invalid part3 name for any Stored Procedure Change Rule. Explanation: You specified <ACTIVE> for part 3 of the object name for a native stored procedure. For a change rule, <ACTIVE> is invalid for any part of the object name. User response: For part 3 of the name, specify a blank or a wildcard value. |
BMC70372W | Migrate Profile Invalid. Explanation: To import a DML file, you specified the name of an inbound migrate profile. You cannot use a migrate profile when importing a DML file. User response: Remove the name of the migrate profile. |
BMC70373E | BMC UNLOAD PLUS required. Explanation: On the Analysis Utility Options panel, you selected the LOB DATA MOVER program to unload data in large object (LOB) columns. However, you did not choose BMC UNLOAD PLUS as the unload utility. User response: Either select BMC UNLOAD PLUS, or deselect the LOB DATA MOVER option. |
BMC70374E | BMC LOADPLUS required when specifying LOBDATAMOVER. Explanation: On the Analysis Utility Options panel, you selected the LOB DATA MOVER program to unload data in large object (LOB) columns. However, you did not choose BMC LOADPLUS as the load utility. User response: Either select BMC LOADPLUS, or deselect the LOB DATA MOVER option. |
BMC70375E | LOBDATAMOVER invalid for a full-recovery baseline Explanation: You selected generating a worklist that will establish a full-recovery baseline or reload data from a previous full-recovery baseline. You also selected the LOB DATA MOVER program to unload data from large object (LOB) columns. CHANGE MANAGER cannot generate full-recovery baselines of tables that include a LOB column. User response: Deselect the option to use the LOB DATA MOVER program to unload LOB columns. |
BMC70376E | Select only one Explanation: On the Analysis Reorg Options panel, you selected one of the following combinations of options:
User response: Clear one of the selected options. |
BMC70377E | A selection must be made Explanation: On the Analysis Reorg Options panel, you did not select an option from the Perform Reorg group or from the When SHRLEVEL CHANGE not applicable or not requested group. User response: Select one option from each of these groups. |
BMC70378E | INLINE value must be <DEFLT> or >= 0 and <=32680 Explanation: When you created a change rule for the inline attribute of a table, you specified an invalid value for the current attribute value or the new attribute value. The inline length must be <DEFLT>, or any value from 0 through 32680. User response: Specify a valid value for the inline length. |
BMC70379E | INLINE current value cannot be <DEFLT> Explanation: A change rule on a table for an outbound migrate profile specifies <DEFLT> as the current attribute value for the inline attribute. The value for an inline LOB column in a table cannot be <DEFLT>. User response: Change the current attribute value for the inline attribute. |
BMC70380I | CHANGE MANAGER recommends that you baseline all versions of a stored procedure - press PF3 to continue Explanation: When you create a baseline that contains a stored procedure, BMC recommends that you include all versions of the stored procedure. User response: To include all versions of the stored procedure in the baseline, change part three of the stored procedure name to an asterisk (*). |
BMC70381E | Valid dssize values are: 1,2,4,8,16,32,64,128,256 Explanation: You have specified an invalid DSSIZE. Partitioned or partitioned-by-range table spaces that use absolute page numbering requires a value of 1, 2, 4, 8, 16, 32, 64, 128, or 256. User response: Either change DSSIZE or change the partitioning status, if applicable. |
BMC70383E | Reorg for pending DDL is only valid for Reorg Pending Explanation: On the Analysis Reorg Options panel, you have selected the following mutually exclusive Perform Reorg options:
User response: To correct the problem, perform one of the following actions:
|
BMC70384E | Member not found for PDS 'dataSetName(memberName)' Explanation: The member name specified in the data set name does not exist. User response: Specify a valid member name. |
BMC70385E | Valid CCSID values are <DEFLT>, EBCDIC, ASCII or UNICODE. Explanation: You specified an invalid change rule new value for CCSID attribute. Valid new values are <DEFLT>, EBCDIC, ASCII and UNICODE. User response: Specify a valid value. |
BMC70387E | Valid CCSID values are *, EBCDIC, ASCII or UNICODE Explanation: You specified an invalid change rule current value for the CCSID attribute. Valid current values are *, EBCDIC, ASCII or UNICODE. User response: Specify a valid value. |
BMC70389E | Pagenum must be A (Absolute) or R (Relative) Explanation: You specified an invalid value for PAGENUM. User response: Change PAGENUM to one of the following values:
|
Comments
Log in or register to comment.