CMDB synchronization provides a configurable mechanism to keep data in the BMC Atrium CMDB (CMDB) synchronized with information discovered by BMC Discovery. You set up connections to CMDBs individually, enabling you to configure specific filters and blackout windows for each. You can also enable or disable and pause or resume synchronization on individual connections, or globally.
BMC Discovery maintains an authoritative model of the dataset of each configured CMDB connection, in its datastore. When a CMDB sync connection is created, BMC Discovery creates a shadow copy of the data that the corresponding CMDB dataset should hold and sends that to the CMDB. When data is modified as the result of discoveries, deletions or manual syncs, these changes are updated in the shadow copy and propagated to the CMDB, without the need to first check the contents of the actual CMDB, meaning that only changes are sent to the CMDB.
Occasionally the model stored in the CMDB dataset becomes out of step with the shadow copy for a CMDB connection and requires resynchronization. For example, if CMDB tools have been used to modify the dataset. In this case, when updates are written to non-existent nodes, instance errors are raised. When BMC Discovery registers these instance errors it attempts to fix them automatically, but sometimes a resynchronization is recommended.
In other cases such as after upgrade from a 10.1 appliance or the creation of a new CMDB sync connection to a non-empty dataset, a resynchronization is mandatory, and CMDB sync is disabled until the resynchronization is complete.
At the time of its release, integration of the current version of BMC Discovery was supported with the following versions of BMC Atrium CMDB:
For more information, check the BMC Solution and Product Availability and Compatibility utility (SPAC) (support login required).
A new class, BMC_CloudInstance is added in BMC Atrium Core 9.1.03: Service Pack 3 to support cloud discovery. To synchronize cloud nodes to the CMDB, you must have this service pack installed. Service Pack 3 also provides a REST API which you can use as an alternative access mechanism to use to connect to the CMDB.
Significant mapping changes since previous releases
If you are upgrading from a previous release, note the following significant changes in the default data mapping:
Do not change the CMDB synchronization configuration at the same time as changing the cluster configuration.
The BMC Discovery data model (Discovery model) is different from the Common Data Model (CDM) used in the CMDB, so the synchronization mechanism is responsible for transforming the required information from one data model to the other. The Discovery model is known as the source model, and the CDM is referred to as the target model.
Both models are graph models, meaning that they represent data as nodes connected to each other with relationships. Synchronization operates on portions of the full graph known as subgraphs. A subgraph contains a root node (such as a host computer), plus all the related nodes that belong to it (such as network interface information, software information, and so on), referred to as its components. Some nodes can be shared, meaning that they belong to more than one subgraph. For example, the node representing a subnet is shared by all the host computers on that subnet.
The mapping between the Discovery model and the CDM is defined in syncmapping definitions within TPL files.
The Default CDM Mapping provides a comprehensive mapping from the Discovery model to a best-practices CDM model. If you have added custom nodes to Discovery they are not exported automatically by the default CDM mapping, instead, you will have to create additional mapping definitions within TPL files.
Synchronization occurs in the following stages:
The BMC Discovery filter sub page for a CMDB connection can be used to specify which source nodes will be synced.
The updates identified are made in batches to the CMDB. Once an update has been made to the CMDB (by creating, updating and (soft) deleting CIs and relationships), it is also made to the local shadow copy for the connection. The next batch is then processed in the same way until no more updates are required.
If any changes are made to the class definitions in the CMDB (for example, adding classes or attributes), you cannot synchronize to them until the BMC Discovery services have been restarted. After the system restarts, the class definitions are read and all customized classes and attributes are available for CMDB synchronization.
Occasionally the model stored in the CMDB dataset becomes out of step with the shadow copy for a CMDB connection and require resynchronization. For example, if CMDB tools have been used to modify the dataset. In this case, when updates are written to non-existent nodes, instance errors are raised. The Discovery dataset is not intended to be modified (for instance to create Business Services), the Asset dataset should be updated instead. However, when BMC Discovery registers these instance errors, it attempts to resolve the situation automatically, but if it occurs repeatedly a resynchronization is recommended.
In other cases, such as after upgrading from version 10.1, or the creation of a new CMDB sync connection to a non-empty dataset, a resynchronization is mandatory, and CMDB sync is disabled until the resynchronization is complete.
Resynchronization must assess the contents of the CMDB dataset against the authoritative version stored in the Discovery shadow copy for the CMDB connection and send the appropriate updates to the CMDB. The stages in a resynchronization are:
There are two types of resync:
You can choose which type of resync to use on the Resync tab of the CMDB Sync page. You can also choose to prepare the resync only, in which case the resync is prepared on the BMC Discovery side; no updates are made to the CMDB. Using prepare only you can examine the changes that CMDB Sync will make to the CMDB before performing the commit.
Where a resynchronization is interrupted, you can resume resynchronization from the point at which it was interrupted.
In the following situations a resynchronization is mandatory, and CMDB sync is disabled until the resynchronization is complete.
When you add a new sync connection, its shadow copy is created empty. When the connection is created, the credentials and CMDB version are checked. The first check also determines whether the CMDB dataset is populated. If it is, a resynchronization is required to populate the shadow copy with discovered information and sync that with the CMDB. If the dataset and shadow copy are both empty then no resynchronization is required.
For a dataset used in a new connection to be considered empty, it must be totally empty. It must not even contain any CIs that have MarkAsDeleted=Yes. If you connect BMC Discovery to a dataset that you believe to be empty, but BMC Discovery reports that it is not empty, it is likely that there are some marked-deleted CIs present. You must purge the marked-deleted CIs, or create a brand new dataset.
When you upgrade a version 10.1 appliance which is configured for CMDB sync, its configuration is modified to the new format, but the shadow copy is not populated. However, the CMDB dataset corresponding to the connection may still be populated from a sync performed before the upgrade. If a sync were attempted immediately, BMC Discovery would not be aware of the existing contents of the dataset, and the result could be the creation of duplicate CIs. A resynchronization is therefore required, to query the entire contents of the dataset before updating it. Before the resynchronization can be performed though, it may be necessary to manually create filters corresponding to the ones that existed prior to the upgrade - see CMDB Synchronization Filters.
If a resynchronization fails or was cancelled, a resynchronization is required before the connection can be resumed.
The following steps are required to set up CMDB synchronization:
Synchronization can be configured to run in a continuous mode, meaning that as soon as BMC Discovery completes its scan of a device, the data corresponding to it is queued for synchronization with the CMDB. Alternatively, synchronization can be launched manually for one or more devices from within the browsing interface.
Typically, synchronization can occur at any time. However, synchronization can place a substantial load on the CMDB, so it might be necessary to prevent synchronization from occurring at times the CMDB will be used heavily. This can be achieved by configuring Configuring CMDB Sync blackout windows.
By default, all details about all devices are synchronized to the CMDB. Filtering enables you to synchronize a subset of the BMC Discovery data. After each of the first three synchronization stages, the data can be filtered to affect the data that finally reaches the CMDB. See CMDB sync performance notes and Filtering nodes and CI types for CMDB Sync for more information.
When a non-fatal error occurs during synchronization with the CMDB, the root node is re-queued so the synchronization is attempted again. A root node is re-queued up to three times if it fails repeatedly, then synchronization is not attempted again. When the outage is resolved, subsequent discovery runs trigger continuous synchronization and re-submit root node creations and updates. Deletions however are not automatically re-submitted, leading to orphaned graphs in CMDB dataset.
When the network outage is resolved, perform a resynchronization to ensure the CMDB contents match the data in BMC Discovery. Alternatively, to synchronize a selection of the missed deletions, run the report “Aged-out Hosts and other devices that failed last CMDB sync”, found in Explore > Reports > BMC Discovery Deployment. Select one or more nodes from the list, and choose Actions > Sync to CMDB.
If you change any of the CMDB class definitions, for example, using the CMDB Class Manager utility, you must perform a CMDB resynchronization.