This documentation refers to a previously released version of BMC Discovery.
See the information on this topic for the latest version (11.2) or version 11.1.

IBM i (AS/400) discovery is undertaken using SNMP. SNMP discovery is supported for all devices with an accessible SNMP agent. Discovery supports SNMP v1, v2c, and v3. For some older platforms (Netware, for example) the use of SNMP v1 might be required. This requirement is defined on a per-credential basis. Only read (GET, GETNEXT, GETBULK) access is required.

This page shows the method used, the MIB values, and the OIDS used.

Method

MIB Values

OID

getDeviceInfo*

SNMPv2-MIB::sysDescr.0
SNMPv2-MIB::sysName.0

1.3.6.1.2.1.1.1.0
1.3.6.1.2.1.1.5.0

getHostInfo*

HOST-RESOURCES-MIB::hrSystemUptime.0
HOST-RESOURCES-MIB::hrMemorySize.0

1.3.6.1.2.1.25.1.1.0
1.3.6.1.2.1.25.2.2.0

getInterfaceList*

IP-MIB::ipAddrTable
[ ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask ]
IF-MIB::ifTable
[ ifIndex, ifDescr, ifSpeed, ifPhysAddress ]

1.3.6.1.2.1.4.20.1
[ .1, .2, .3 ]
1.3.6.1.2.1.2.2.1
[ .1, .2, .5, .6 ]

getNetworkConnectionList

TCP-MIB::tcpConnTable
[ tcpConnState, tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort ]
UDP-MIB::udpConnTable
[ udpLocalAddress, udpLocalPort ]

1.3.6.1.2.1.6.13.1
[ .1, .2, .3, .4, .5 ]
1.3.6.1.2.1.7.5.1
[ .1, .2 ]

getPackageList

HOST-RESOURCES-MIB::hrSWInstalledTable
[ hrSWInstalledName ]

1.3.6.1.2.1.25.6.3.1
[ .2 ]

getProcessList

HOST-RESOURCES-MIB::hrSWRunTable
[ hrSWRunIndex, hrSWRunName, hrSWRunPath, hrSWRunParameters ]

1.3.6.1.2.1.25.4.2.1
[ .1, .2, .4, .5 ]

Was this page helpful? Yes No Submitting... Thank you
  • No labels


© Copyright 2017 BMC Software, Inc. © Copyright 2017 BladeLogic, Inc.

Legal notices