Platform alarm reference

Platform alarms are generated for the following BMC Real End User Experience Monitoring components:

Applicable component	Component name
Aggregation Server	Aggregation Server for Extended Reporting
Analyzer¹	Real User Analyzer
APM Console	BMC Application Management Console
Collector¹	Real User Collector or TS-4200 hardware Collector
Hardware¹	BMC TrueSight End User Monitor 4200 Series
PAE	Performance Analytics Engine
APM Central²	Application Performance Management Central

^{1.Alarms that apply to an Analyzer, Collector, or hardware, also apply to a Real User Monitor.} ^{2.Alarms that apply to APM Central, apply to the AM Console, PAE, and Monitor installed with that component.}

The tables below list the alarms and indicate the components to which the alarm applies.

System alarms
Storage alarms
Config alarms
Collector alarms
Memory alarms
Product alarms

For information about platform alarms and the ways in which you can view them, see End-user experience monitoring platform alarms.

System alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
system.account.defined	error	Security Officer account not configured	A user account with the Security role must exist on the system for UI access.	All	None
system.capture.broken	critical	Unable to setup capture interface	The system is unable to set up the capture interface from the network interfaces available to the system. Corrective actions will be taken.	Collector, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will re-initialize the capture interface. After 3 unsuccessful initialization attempts, the system will reboot.
system.capture.drop	attention	System dropping packets on capture ports	Within the last minute, the system was unable to process all network traffic on the capture ports. These drops occur at the OS level.	Collector, Hardware, APM Central	None
system.capture.noHttp	info	Captured traffic contains no HTTP data	Within the last minute, the system detected receipt of network traffic but it is not HTTP traffic.	Collector, Hardware, APM Central	None
system.capture.noHttps	info	Captured traffic contains no HTTPS data	Within the last minute, the system detected receipt of network traffic but it is not HTTPS traffic.	Collector, Hardware, APM Central	None
system.capture.noTraffic	error	System not receiving TCP traffic on capture ports	Within the last minute, the system detected receipt of network traffic but it is not TCP traffic. Since the HTTP protocol uses TCP, no HTTP traffic detected either.	Collector, Hardware, APM Central	None
system.capture.sampling	attention	System dropping traffic due to resource starvation	In the last 10 minutes, there was at least 1 hit (HTTP transaction) dropped by the system due to resource starvation.	Analyzer, Collector, Hardware, APM Central	None
system.capture.sampling.query	attention	System is dropping traffic due to resource starvation while a user-initiated database query was executed	The system has detected a drop in processed traffic and an active Session Browser query was started before this condition. The query has also been running for more than 60 seconds.	Analyzer, Hardware, APM Central	None
system.console.multipleconsoles	error	Several Consoles attempt to manage this device: consoleNames. If the Console IP was recently changed, this condition should clear in 5-10 minutes.	A PAE traffic server can be managed by only one Console at a time. You have incorrectly configured PAE on the following Consoles: consoleNames For instructions, see Managing Performance Analytics Engine instances.	PAE	None
system.console.notpresent	info	No AM Console detected	The PAE traffic server is not being managed by an AM Console. Your PAE configuration is incomplete. For instructions, see Assigning data providers.	PAE	None
system.cpu.busy	attention	Average CPU utilization number% in the last 5 minutes is above configured threshold	The system has detected a CPU utilization in the last 5 minutes that is higher than the configured threshold (current utilization is number%). cpuUtilThreshold property¹: The maximum percentage of CPU utilization that can be reached before an alarm is raised; the default value is 90%.	All	None
system.cpu.freeze	critical	One or more CPU not responding	One or more CPUs on the system are not behaving as expected and could be halted. Corrective actions will be taken.	All	If this alarm has been raised for 5 consecutive minutes, the system will perform a full system reboot. If the condition persists after 20 minutes, the system might be unsuccessfully trying to restart. The alarm will force a low level reboot.
system.data.badVersion	critical	System image not compatible. Data migration required	The system is currently running a product version that is incompatible with the data stored on the system. Open a ticket with Customer Support immediately.	All	None
system.database.connection	critical	Too many connections registered in DB engine	The database engine reports there are too many processes connecting to it. This causes system instability.	Analyzer, Hardware, APM Central	After raising the alarm, the system immediately performs a software reboot to clear this situation.
system.database.full	critical	The database is full. Purging might not be possible. Contact Customer Support immediately	The database is taking too much space on the disk. Automatic purging by the system might not be possible. Contact BMC Customer Support immediately to clean the disk. pollFrequency property¹: How often to check for this condition; the default value is 5 minutes. dbFullThreshold property¹: How much of total disk space is used by the database; the default value is 98%.	Analyzer, Hardware, APM Central	None
system.database.small	error	The database is running in demo mode (max. 1 GB). This configuration is not recommended for production systems.	When deploying an Analyzer, you must configure additional storage for the Session Browser database. If it was not allocated, then the default 1GB database will provide data retention for only a few minutes. minimalDBBytes property¹: The minimum number of bytes a database file part needs to be before being declared small; the default value is 25000000000. For information, see Storage requirements.	Analyzer, Hardware, APM Central	None
system.dataprovider.connection	error	System is unable to connect to data provider (provider IPaddresses)	The PAE system is unable to connect to one or more configured data providers: provider IPaddresses.	PAE	None
system.datawarehouse.notavailable	error	Data warehouse is not available	The Aggregation Server is unable to detect a configured data warehouse. You will get data loading errors in the UI.	Aggregation Server	None
system.datawarehouse.notconfigured	error	Data warehouse is not configured properly	A data warehouse is not configured properly on the Aggregation Server. Try to reconfigure this system. For instructions, see Connecting the Aggregation Server to a data warehouse.	Aggregation Server	None
system.epx.watchdog	critical	Packet capture process not responding	The system detected a problem in the packet capture process. The system could be in trouble and will perform corrective actions.	Collector, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will restart the packet capture process gracefully. If this does not fix the problem, the system will restart the packet capture process forcefully. If it is still unsuccessful, then the system will perform a software reboot.
system.ethernet.noTraffic	error	No traffic on capture interface (network Interface name)	There is no network traffic detected from the capture interface (network Interface name). threshold property¹: The minimum number of bytes that must be flowing within a minute before triggering the alarm. enabled property¹: The current status of the alarm; the default value is 0, which is disabled.	Collector, Hardware, APM Central	None
system.ethernet.portsMissing	critical	Capture port (network Interface name) is missing.	A configured capture port (network Interface name) is no longer defined in the system. Your system will not process some traffic fed to it.	Collector, Hardware, APM Central	None
system.fanout.case	attention	One or more case fans failed	One or more of the internal fans failed. This can result in overheating of the unit. Prolonged overheating of the unit will result in hardware failures.	Hardware	None
system.fanout.cpu	attention	One or more CPU fans failed	One or more of the internal CPU fans failed. This can result in overheating of the CPU module. Prolonged overheating of the CPUs will result in hardware failures.	Hardware	None
system.https.connection	error	Stale HTTP connection detected: client IP and Port List	The system has detected a stale connection from client IP and Port List to the management port.	All	If this alarm has been raised for 5 consecutive minutes, the system will automatically reset all stale connections.
system.http.ping	critical	Cannot get data from the HTTP management port	The system is unable to access its own management port. You will not have access to the end-user experience monitoring component until the condition is cleared. raiseThresholdMinutes property¹: The time the system will wait before the alarm is raised; the default value is 15 minutes.	All	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this does not fix the problem, a full reboot is performed.
system.https.ping	critical	Cannot get data from the HTTPS management port	The system is unable to access its own management port. You will not have access to this end-user experience monitoring component until the condition is cleared. raiseThresholdMinutes property¹: The time the system will wait before the alarm is raised; the default value is 15 minutes.	All	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this does not fix the problem, a full reboot is performed.
system.java.oom	critical	Java process out of memory	The system detected that the Java portion of the software has run out of memory. It was restarted automatically.	All	None
system.management.IfDown	error	No link detected on the management port	No network link signal can be detected on the management port of the system. Since this is the primary way to interact with the system, it must be corrected.	All	If this alarm has been raised for 5 consecutive minutes, the system will restart the management interface. If this does not fix the problem, the link speed will be set to autonegotiation and the management interface will be restarted.
system.management.IfSpeedLow	info	Management port not negotiated at maximumMode (current mode: speed duplex duplex).	The management port's network link is not negotiated at the highest speed possible. It is currently set to speed and duplex.	Hardware	None
system.memory.hypervisor.swap	error	Hypervisor swapped the memory of this VM to disk	The system (running on VMware) has had its memory space swapped out by the host hypervisor. The system functions can be compromised and its performance degraded.	All running on VMware except Hardware	None
system.memory.swap	attention	System is swapping memory	The system detected that it had to swap a lot of memory out to disk.	All	None
system.mode.booting	attention	System is booting	The system is currently booting up. Data processing might not have resumed, and the UI might not be available.	All	None
system.mode.migrate	info	System config migration on going	The system is undergoing configuration migration. This might take some time for data processing to resume. The UI is not available at this time.	All	None
system.mode.safe	critical	System running in safe mode	The system is running in safe mode. This is either because the system entered an unstable state or the Customer Support team has done this. The system is not processing data.	All	None
system.mode.softreboot	info	System performing software reboot	The system is performing a software reboot. This is typically done by a critical alarm to solve an issue.	All	None
system.nas.notconfigured	error	Network attached storage (or local data storage) is not configured	There is no data storage configured for this system. Data loading will not work. For instructions, see Assigning data providers or Connecting the Aggregation Server to a NAS device.	Aggregation Server, PAE	None
system.nas.notmounted	error	The configured (remote or local) data storage is not mounted. Check whether configuration parameters are correct	The configured data storage for this system is not available for access. No new data loaded will be loaded until this is resolved.	Aggregation Server, PAE	None
system.network.connectivity	error	The system is unable to ping its default gateway IP address	The system is unable to ping the configured default gateway IP address. You might be unable to access the UI during this time.	All	None
system.notPublishing.data	critical	Received data not published in the database	The system is receiving data but recent data was not inserted into the database.	Analyzer, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this isn't solved by a software reboot, the system will perform a full reboot.
system.notPublishing.rawdata	critical	Received raw data not published in the database. The database is in error	The system is receiving data but the Session Browser database is not being updated. raiseThresholdSeconds property¹: The time to wait for a persisting condition before raising the alarm; the default value is 600 seconds.	Analyzer, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this isn't solved by a software reboot, the system will perform a full reboot.
system.notPublishing.sum_obj	critical	Summary object data not published in the database	The system is receiving data but the Watchpoint database is not being updated. raiseThresholdSeconds property¹: The time to wait for a persisting condition before raising the alarm; the default value is 1200 seconds.	Analyzer, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this isn't solved by a software reboot, the system will perform a full reboot.
system.notPublishing.sum_page	critical	Summary page data not published in the database	The system is receiving data but the Watchpoint database is not being updated. raiseThresholdSeconds property¹: The time to wait for a persisting condition before raising the alarm; the default value is 1200 seconds.	Analyzer, Hardware, APM Central	If this alarm has been raised for 5 consecutive minutes, the system will perform a software reboot. If this isn't solved by a software reboot, the system will perform a full reboot.
system.oracle.load	error	Data load issues were detected that could be related to the data warehouse state. Check whether the data warehouse is properly configured and is reachable from the Aggregation Server	Data load issues were detected that could be related to the data warehouse state. Check whether the data warehouse is properly configured and is reachable from the Aggregation Server For instructions, see Connecting the Aggregation Server to a data warehouse.	Aggregation Server	None
system.process.database	critical	DB engine is not running	The database engine is not running. None of the captured or processed data is kept for viewing.	Analyzer, Collector, Hardware, APM Central	None
system.process.epx	critical	EPX not running	The packet capture engine is not running. No traffic is being monitored.	Collector, Hardware, APM Central	None
system.process.etl	critical	ETL process is not running	The database loading engine is not running. The Aggregation Server is not storing new data.	Aggregation Server	None
system.process.java	critical	java not running	The Java portion of the software is not running. No data is being capture or processed.	All	If this alarm has been raised for 5 consecutive minutes, the system will restart the Java software. If this does not resolve the issue, the system will perform a software reboot.
system.process.snmp	attention	SNMP not running	The SNMP agent process is not running. System alerts will not be sent out by SNMP.	All	None
system.process.virgo.deadlock	critical	Virgo detected a deadlock in the java application	The system detected that the Java portion of the software is in trouble. It was restarted automatically.	Aggregation Server Console, PAE, APM Central	None
system.publishing.rcsp.loss	critical	Data loss occured for record streaming protocol clients: IPaddressList	The system detected a drop in the outgoing queue of the RCSP publisher. This is used to feed PAE with data. The following systems are affected: IPaddressList	Analyzer, Hardware, APM Central	None
system.publishing.screen	info	System receiving data, but traffic exclusion policies reject all of it	The system is receiving traffic but all traffic was rejected by the configuration. Check your configuration settings. For information, see Traffic inclusion and exclusion policies. raiseThresholdSeconds property¹: The time the system will wait before the alarm is raised; the default value is 1200 seconds.	Analyzer, Hardware, APM Central	None
system.query.slow	info	query Count queries are running for more than threshold hours	The system detected long running queries. The duration of the queries (query Count) exceeded the configured threshold (threshold) time. queryThreshold property¹: The maximum duration of a query before it is considered to be running too long; the default value is 1 hour.	PAE, APM Central	None
system.ssh.status	info	SSH access is disabled	The access to the system by SSH is currently disabled. If you don't have access to the system from an APM Console, enabling SSH is the only way to access the CLI commands. For instructions, see Controlling remote access to the command-line interface.	All	None
system.status.lastreset	info	Last reboot caused by reset Flag value	The onboard diagnostics system detected the cause of the last system reboot.	Hardware	None
system.status.psu	error	PSU redundancy lost. Check that both power supply units are correctly powered	The diagnostics module detected an inconsistency in the power supply. Verify they are both running properly to ensure availability of the system.	Hardware	None
system.status.watchdog	error	System was rebooted by the watchdog	The system was last rebooted by the diagnostics module because it did not think the system was operational.	Hardware	None
system.stream.termination	error	A watchpoint stream for wpid from username at ip-address was terminated after time	The user username from system ip-address terminated a getstream API call for Watchpoint ID wpid after duration time.	Analyzer, Hardware	None
system.time.drift_adjusted	attention	System readjusted its time after detecting a time drift	The system's internal clock was adjusted.	All except Hardware	None
system.time.drift_detected	error	System time drifting. Software does not keep up the time	The system's internal clock has drifted.	All except Hardware	None
system.time.ntp	attention	NTP service is enabled but the system is not synchronized with any time source. possibleCause	The system detected no synchronization with any of the configured NTP servers. If a cause is given in this alarm, the system is unable to reach the configured NTP servers.	All	None
system.time.ntpsync	error	NTP time synchonization detected a time offset greater than 5 seconds in the last 24 hours	The system detected it was more than 5 seconds from the NTP servers. It resynchronized itself.	All	None
system.userlogin	info	The user user Name last logged on more than allowed interval minutes ago	The system detected the user user Name has not logged in since allowed interval minutes. user property¹: The user account name to watch; the default value is default. allowed_internal property¹: The maximum interval between logins for the specified user; the default value is 0 minutes, which disables the alarm.	Analyzer, Collector, Hardware, APM Central	None
systemCaptureIfDown	error	No link detected on capture port interfaceName	There is no network link detected on the capture port interfaceName. Traffic processing is disabled.	Collector, Hardware, APM Central	None
systemCaptureIfSpeedLow	info	Capture port[s] interfaceList not negotiated at 1000 Mb/s or 10000 Mb/s	The system detected that the configured capture ports are not currently negotiating at 1Gb/s or 10Gb/s. This can seriously impair the main function of the system.	Hardware	None
systemUserReboot	attention	User userName requested system reboot.	System was rebooted by user username.	All	None
systemUserShutdown	attention	User userName requested system shutdown.	System was shutdown by user username.	All	None

^{1.To view alarm properties, use the alarm command}^{-p parameter. To set alarm properties, use the -s parameter.}

Storage alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
storage.data_partition.full	critical	The system has reached the CRITICAL disk space threshold configured threshold%. The system has stop loading data to prevent data inconsistencies. Restart the Aggregation Server and, contact BMC Customer Support, if the alarm does not clear.	None. diskFullThreshold property¹: The amount of disk space used by the temporary files before this alarm is raised; the default value is 97%.	Aggregation Server	If this alarm has been raised for 5 consecutive minutes, the system will stop the data loading process. No new data will be added to the database until this situation is corrected.
storage.data_partition.nearfull	error	The system has reached the warning disk space threshold configured threshold%. When critical disk space threshold is reached the system will stop loading Data warehouse data to prevent data inconsistencies. Restart the Aggregation Server and, contact BMC Customer Support, if the alarm does not clear.	None. diskNearFullThreshold property¹: The amount of disk space used by the temporary files before this alarm is raised; the default value is 94%.	Aggregation Server	None
storage.drive.full	critical	The filesystem on mount Folder is full	The maximum disk allocation for the folder named mount Folder has been reached by the system. System stability is compromised. Please contact BMC Customer Support as soon as possible.	All	None
storage.drive.missing.perc	error	Missing drives detected in the RAID array. missing Disk Message	The system has detected that some default disk drives are no longer online. The message indicates which drives are missing. Please contact BMC Customer Support as system stability may be compromised.	Hardware	None
storage.drive.temperature	attention	Hard disk drive drive Identifier too hot	The system detected the hard drive temperature has exceeded the configured threshold. scsiDriveTempThreshold property¹: The temperature at which a SCSI drive will raise the alarm; the default value is 40 Celsius. sataDriveTempThreshold property¹: The temperature at which a SATA drive will raise the alarm; the default value is 40 Celsius.	Hardware	None
storage.image.rescue	attention	Rescue image not synchronized	The rescue image partition is not properly synchronized with the currently running system image. To correct the issue, run the `installRescue` CLI command.	All	None
storage.innodb.readerror	attention	Innodb read error: message	The system has detected an error reading a database file. Please contact Customer Support to verify the disks.	Analzer, Hardware, APM Central	None
storage.nas.full	critical	The configured (remote or local) data storage has reached the critical disk space threshold (configured Threshold%). Please allocate more space to this storage location to prevent data continuity from being affected.	None. nasFullThreshold property¹: The amount of disk space used before this alarm is raised; the default value is 97%.	Aggregation Server, PAE, APM Central	None
storage.nas.nearfull	error	The configured (remote or local) data storage has reached the warning disk space threshold (configured Threshold%). Please allocate more space to this storage location to prevent data continuity from being affected.	None. nasNearFullThreshold property¹: The amount of disk space used before this alarm is raised; the default value is 94%.	Aggregation Server, PAE, APM Central	None
storage.nas.write	critical	Error writing to the configured (remote or local) data storage. Check availability and permissions.	None.	Aggregation Server, PAE, APM Central	None
storage.performance.io	attention	Performance of drives drive Identifiers does not match data processing volume	Drive performance for drive Identifiers is not sufficient for optimal operations.	All	None
storage.raid.perc.degraded	error	Raid Identifier disk array is running in degraded mode. Run raidstate for more details	The system has detected the RAID system is running in degraded mode. Please run the `raidstate` CLI command for more details.	Hardware	None
storage.raid.perc.rebuilding	info	Raid Rebuilding State	The system is currently rebuilding the RAID system. The current progress is Raid Rebuilding State.	Hardware	None
storage.smart.error	attention	SMART errors on drives: drive Identifier (Serial numbers: drive Serial Numbers)	The internal RAID system has detected SMART errors on the following drives: drive Identifier and drive Serial Numbers.	Hardware	None
storage.smart.failed_test	attention	SMART test failed on drives: drive Identifier (Serial numbers: drive Serial Numbers)	The internal RAID system has detected failed SMART tests on the following drives: driveI dentifier and drive Serial Numbers.	Hardware	None
storage.smart.failing	critical	Imminent failure of drives: drive Identifier (Serial numbers: drive Serial Numbers)	The internal RAID system has detected imminent failure on the following drives: drive Identifier and drive Serial Numbers.	Hardware	None
storage.smart.pending_sectors	info	Unreadable sectors pending for reallocation: message	The internal RAID system has detected unreadable, pending sectors with the following message: message	Hardware	None
storage.smart.reallocated	info	system Message	The system detected a disk sector reallocation from the controller.	Hardware	None

Config alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
config.javapublishing.disabled	info	RAW data storage is disabled by config	The system configuration disabled the storage of transcript data. The Session Browser feature will not return any results, and drilling down from a dashlet, a report, or an incident will not return any result.	Analyzer, Hardware, APM Central	None
config.trafficCapture.disabled	attention	Traffic capture is disabled	The system configuration disabled the traffic capture process. Data capture and processing will not be performed, and data will not be sent to the Analyzers.	Collector, Hardware, APM Central	None
configPublicTrafficExcluded	info	Traffic-exclusion policy configured. Some traffic might be excluded.	The system configuration has traffic exclusion policies configured. Some traffic will not be processed.	Analyzer, Hardware, APM Central	None

Collector alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
collector.downloadTime.exceeded	error	Download time for one or more collectors has been exceeded	One or more configured Collector feeds took longer than 30 seconds to transfer its traffic payload to the Analyzer.	Analyzer	None
collectorDisconnected	error	Collector feed list Of Collectors not responding	One or more configured Collector feeds in the list Of Collectors is not responding. The Analyzer should automatically reconnect shortly. If this alarm has been raised for more than 5 minutes, open a support ticket with Customer Support to investigate.	Analyzer	None
collectorDrdDataBufferFilling	attention	Data buffer for the data-receiving device analyzer-name is 70% full	The data buffer for the Analyzer analyzer-name is 70% full. If this situation worsens, a more severe alarm will be raised.	Collector	None
collectorDrdDataBufferFlushed	info	Data-receiving device analyzer-name flushed its buffer on the Collector	The Analyzer system analyzer-name sent a flush request to this Collector and its data buffer was cleared.	Collector	None
collectorDrdDataBufferFull	attention	Data buffer for the data-receiving device analyzer-name is 95% full	The data buffer for the Analyzer analyzer-name is 95% full. This situation can lead to data loss.	Collector	None
collectorDrdDataOld	info	Age of buffered data exceeds 70% of the tolerance level for the data-receiving device analyzer-name	The oldest data in the Collector's buffer exceeds 70% of the tolerance level configured on the Analyzer analyzer-name. If this situation worsens a more severe alarm will be raised.	Collector	None
collectorDrdDataTooOld	attention	Age of buffered data exceeds 95% of the tolerance level for the data-receiving device analyzer-name	The oldest data in this Collector's buffer exceeds 95% of the tolerance level configured on the Analyzer analyzer-name. If this situation worsens a more severe alarm will be raised.	Collector	None
collectorDrdDroppingData	error	Data buffer for the data-receiving device analyzer-name is full. The Collector dropped oldest data.	The data buffer for the Analyzer analyzer-name exceeded capacity. This Collector has dropped the oldest data to recover.	Collector	None
collectorDrdDroppingDataTooOld	error	Age of buffered data exceeds of the tolerance level for the data-receiving device analyzer-name. The Collector dropped this data.	The oldest data in this Collector's buffer exceeds the tolerance level configured on the Analyzer analyzer-name. The Collector dropped the oldest data.	Collector	None
collectorDrdTimedOut	error	Disconnected inactive data receiving device analyzer-name	The data connection between this Collector and the Analyzer analyzer-name has timed out. Check for possible network problems between the two devices.	Collector	None
collectorNoDrdConnected	info	No data receiving device connected	This Collector is not feeding its captured traffic to any Analyzer.	Collector	None
collectorNoTrafficReceived	error	Cannot retreive data from Collector feed listOfCollectors	This Analyzer is not receiving any traffic from the following configured Collectors: listOfCollectors.	Analyzer	None

Memory alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
memory.product.ts4200	error	Amount of memory detected RAM size not valid	The amount of memory detected on this system is invalid: RAM size. This system should always have 32GB of RAM.	Hardware	None
memory.product.tsvm	error	Amount of memory detected RAM size not valid	The amount of memory detected on this system is invalid: RAM size. This system should always have at least 3.9GB of RAM.	All except Hardware	None

Product alarms

Alarm name	Severity	Short description	Long description	Applicable components	Automatic corrective actions
product.image.installation	info	Installation in progress	The system is currently installing an image file. System performance can be slightly impacted.	All	None

^{Content contributed by BaoPhac Do}

Page tree