Preparing BMC Atrium CMDB for synchronization

 

The following section describes steps required for BMC Atrium CMDB synchronization:

At the time of its release, integration of the current version of BMC Discovery was supported with the following versions of BMC Atrium CMDB:

  • 9.1
  • 9.0
  • 8.1.02
  • 8.1.01
  • 8.1.00
  • 8.0.00
  • 7.6.04

For more information, check the BMC Solution and Product Availability and Compatibility utility (SPAC) (support login required).

Before you begin

Before you can synchronize data to a supported BMC Atrium CMDB version, you must complete the following required tasks in the given order:

Integrating with earlier versions of BMC Atrium CMDB

BMC Atrium CMDB versions earlier than 7.6.04 are no longer supported and are not recommended for use. Synchronizing data to these earlier versions required you to complete some additional tasks. For more information, see the BMC Discovery 8.3 documentation.

  1. Create the BMC.ADDM dataset: The BMC.ADDM dataset must be manually created in the CMDB before a synchronization is attempted.
  2. Create the Job to merge the BMC.ADDM dataset with BMC.ASSET: After the BMC.ADDM dataset has been created, you must then create the job to reconcile it with the BMC.ASSET dataset.
  3. Check the BMC.ADDM dataset configuration: When using ITSM 7.0 with a backwards compatibility patch, you also need to ensure that the BMC.ADDM dataset is trusted.

After completing the preceding tasks, you can start synchronizing BMC Discovery data to BMC Atrium CMDB.

Performance considerations

To obtain the maximum synchronization performance when using CMDB synchronization with BMC Discovery, you should consider tuning the database which BMC Atrium CMDB (or BMC Remedy AR System) is using.

Max-Entries-Per-Query parameter on BMC Remedy AR System server

To prevent BMC Discovery generating duplicate CIs in the BMC.ADDM dataset when running a resynchronization, you must set the BMC Remedy AR System server parameter Max-Entries-Per-Query to at least 5000.

For more information, see the following documentation corresponding to your product version:

To create the BMC.ADDM dataset

Creating a BMC.ADDM dataset provides a dataset into which BMC Discovery is exported before being taken into the BMC Atrium CMDB. You create the dataset by using the BMC Atrium CMDB Reconciliation console. It is recommended that you create the BMC.ADDM dataset on the primary AR System server.

Warning

The dataset you are creating is intended to receive data from only one BMC Discovery appliance. If your deployment architecture requires that several scanners or consolidator synchronize to the same CMDB, then you must create a separate dataset for each. For example, BMC.ADDM1, BMC.ADDM2, and associated reconciliation jobs.

Once created, do not make any changes to any CMDB synchronization dataset.

  1. You can create a dataset from one of two places in the console.
    • From the Identify activity, click Add Dataset Identification Group Association,
      and then click Create Dataset.
    • From the Mid Tier, Open Atrium Core Console > Applications > Reconciliation console, and then click Create Dataset .
  2. Complete the following fields:

    Field

    Description

    Name

    The name for the dataset. Usually set to BMC.ADDM.

    ID

    The system identifier for the dataset. This must match the ID used in the configuration within BMC Discovery. The default is BMC.ADDM.

    Accessibility

    Set to "Writable".

    DatasetType

    Set to "Regular".

  3. Click Save.

For more information, see:

To create the Identification, Merge and Purge Job

BMC Discovery exports its data to a staging dataset in BMC Atrium CMDB. The content of this dataset should then be reconciled into the BMC.ASSET dataset. To accomplish this, a new Job must be added in the BMC Atrium CMDB Reconciliation Console. It is recommended that you create the Identification, Merge and Purge Job on the primary AR System server.

To add the Identification, Merge and Purge Job

  1. From the Mid Tier, Open BMC Atrium Core Console > Applications > Reconciliation Application.
  2. Select the Create Standard Identification and Merge Job Icon
  3. Give the job a meaningful name (for example, "BMC ADDM - Identification, Merge and Purge").
  4. Set the Source Dataset to be "BMC.ADDM".
  5. After the job is Created, select BMC ADDM - Identification, Merge and Purge Job.
  6. Click the Edit Job icon.
  7. From the Job Editor window, in the Activities pane, select the New tab.
  8. In the New Activity pane, select Type as 'Purge', Sequence as '700' and Name as BMC ADDM - Purge.
  9. In the Datasets option, select Datasets as BMC.ADDM.
  10. Click Done.
  11. Click Save in the Job Editor.

Note

The recommended practice is to create a precedence group that specifies a precedence for the BMC.ADDM dataset. The value depends on your relative preference for data populated by BMC Discovery and other data providers to the CMDB. For more information about how precedence groups are configured, see the following documentation corresponding to your product version:

To check the BMC.ADDM dataset configuration

When using BMC Remedy ITSM 7.0 with a backward compatibility patch, you also need to ensure that the BMC.ADDM dataset is trusted. To do this:

  1. Access the Home page from BMC Remedy User or a browser.
  2. Access the Application Administration Console.
  3. Go to the Custom Configuration page.
  4. From Foundation, select Products / Operational Catalogs.
  5. Select Trusted Datasets for Product Catalog and click Open.
  6. Select the BMC.ADDM dataset for Dataset Name.
  7. Click Save.

To prepare synchronization to another CMDB

There might be occasions where you have already synchronized data to a CMDB, and you want to push data to a different CMDB. For example, if you are migrating from a development to a production environment for your CMDB, you might want to populate your new CMDB with fresh inventory data, independent of previous experiments you might have performed in the development instance. To synchronize the data to the new CMDB, perform the following steps using continuous CMDB synchronization.

  1. Stop any discovery runs.
  2. Stop continuous synchronization (wait for it to finish processing the queue).
  3. Change your configuration to the new CMDB dataset (see the tasks to complete before you begin).
  4. From the CMDB Sync > Configuration tab, click Test Connection to the new CMDB dataset.
    Ensure that the connection is successful before proceeding.
  5. From the Infrastructure > Hosts page, send one or two hosts to the CMDB, and select Actions > Sync with CMDB.
  6. Start continuous synchronization.
  7. Restart your discovery runs.

The data is inserted into the new CMDB dataset as your Discovery jobs are executed. BMC Discovery detects that the data does not exist, and then inserts the data.

To synchronize data from multiple BMC providers to the CMDB

When multiple BMC providers synchronize data to the CMDB (such as BMC Discovery or BMC BladeLogic), there is the possibility that BMC_OperatingSystem instances might not be merged during reconciliation.

BMC Discovery is an agentless discovery tool and, as such, it might retrieve slightly different information than an agent-based product (for example, "SunOS" or "Solaris" for the same server). To eliminate this problem, you can add a fallback reconciliation rule based on the ClassId for BMC_OperatingSystem instances.

Was this page helpful? Yes No Submitting... Thank you

Comments