MultiExcerpt named 'space-announcement' was not found
The multiexcerpt named 'space-announcement' was not found. Please check the page name and MultiExcerpt name used in the MultiExcerpt Include macro.


The BMC Remedy with Smart IT (Smart IT) and MyIT installer supports direct upgrade to Smart IT 1.5.01 and MyIT 3.3 from the following versions, respectively:

  • Smart IT 1.1, 1.2, 1.3, 1.3 Service Pack 1, 1.4, 1.5
  • BMC MyIT 2.6, 3.0, 3.1, 3.2

This topic provides the following information:

Considerations prior to upgrading

The following table provides information about specific scenarios that you should consider prior to upgrading MyIT:

ScenarioConsideration or action requiredAdditional information
You plan to upgrade to BMC Remedy IT Service Management (BMC Remedy ITSM) 9.1 Service Pack 1.Install BMC Remedy AR System Patch 1 followed by  BMC Remedy ITSM 9.1 Service Pack 1  before upgrading to BMC Remedy with Smart IT (Smart IT) 1.5.01. The installation sequence ensures that existing BMC Remedy ITSM functionalities are not affected and escalations are enabled when Smart IT 1.5.01 is installed. For more information about escalation status, see KCS Forms and escalations from the BMC Knowledge Management online documentation.  
You are using BMC Remedy ITSM 8.1.xx or later.Upgrading to Smart IT 1.5.01 and MyIT 3.3 restarts the BMC Remedy AR plug-in server process

The server restart causes a downtime of a few seconds. This allows you to schedule a planned downtime.

If you are using BMC Remedy ITSM 8.0, you have the option to restart the AR System server later.

You have BMC MyIT 2.6 and are using the AppZone Items in Catalog feature. You plan to upgrade to MyIT 3.3.

Before upgrading to MyIT 3.3, you must upgrade to version 3.0, 3.1, or 3.2, and enable the AppZone Items in Catalog feature from the MyIT Administration Console.

In versions prior to BMC MyIT 3.0, the BMC MyIT Administration Console has only the AppZone setting that represents BMC AppZone integration for both, the AppZone tab and the AppZone Items in Catalog feature.

Starting with BMC MyIT 3.0, the BMC MyIT Administration Console has separate settings to configure the AppZone tab and the AppZone Items in Catalog feature.

If you upgrade MyIT directly from version 2.6 to version 3.3, only the AppZone setting remains in the MyIT Administration Console. The AppZone Items in Catalog setting is not separately available, leaving the Catalog without an ability to represent BMC AppZone items.

Upgrade recovery

The Smart IT 1.5.01 and MyIT 3.3 installer provides the option to recover from an upgrade failure. If the upgrade fails, the installer rolls back all the changes made to the database and configuration files. Rerunning the installer resumes the upgrade process from the point where the upgrade had failed in the previous attempt.


  • Do not exit the installer while the upgrade is in progress.
  • In rare cases, you might need to perform the upgrade from all over again. This requires that you take a back up of BMC Remedy AR server database and Smart IT and MyIT database, indicated as a step in the upgrade process.

Upgrade process

MyIT and Smart IT use the same server and share the same installer. This topic describes the general upgrade process.

Best Practice

Install MyIT and Smart IT on a dedicated server. To avoid performance issues, do not install MyIT and Smart IT on servers that host other applications, such as BMC Remedy Mid Tier.

BMC Remedy Smart IT and My IT upgrade comprises the following stages:

Also see the Related topics.

Stage 1:Prepare to upgrade Smart IT and MyIT 

StepActionAdditional information

Review the system requirements:

  • Compatibility matrix
  • Hardware requirements
  • Required ports
Make sure that you meet the system requirements for this release.
2Review the known and corrected issues

Review the following release notes:

  • Release notes and notices
  • Smart IT 1.5 release notes and notices
3 Download the Smart IT and MyIT installation files This topic explains how to obtain the files that you need for installation from the BMC Electronic Product Distribution (EPD) site.
4Review the  Smart IT and BMC My IT performance and tuning guidelines in the BMC Remedy with Smart IT documentation.BMC has conducted an analysis of various performance test results and provided performance benchmarking methodology and environment. The recommendations from these tests are validated by the test results.
5 Complete the upgrade worksheets Before you start installing the products, you must gather information about the parameters that the installer requires for each product. The planning spreadsheet provided in this section helps you gather these parameter values. To avoid installation errors, refer to this spreadsheet when you run the installation.

Install the Smart IT and MyIT User Experience patch

Before you upgrade Smart IT or MyIT, you must install the Smart IT MyIT User Experience patch. This patch enables  BMC Remedy IT Service Management (BMC Remedy ITSM) to work with Smart IT and MyIT. For Smart IT, this patch enables viewing incidents, requests, approvals, and so on in the timeline and activity feed. Without this patch, timelines, email notifications, and social features do not work in either Smart IT or MyIT. The installation applies required BMC Remedy ITSM patches.
8 Upgrading Openfire chat to version 4.0.2 in the BMC Remedy with Smart IT documentation.

Openfire chat 4.0.2 is compatible with Smart IT 1.5.01.

9Upgrade to 64-bit Java Runtime Environment (JRE) 8.Upgrade to JRE 8 on all the servers where you have Smart IT and MyIT installed.
10Take a backup of BMC Remedy AR server database and Smart IT and MyIT database.To recover from any unexpected upgrade failure and resume upgrade from the last executed stage, take a back up of BMC Remedy with Smart IT and MyIT database and BMC Remedy AR Server database.

Stage 2: Upgrade Smart IT and MyIT 


If you are on BMC Remedy IT Service Management (ITSM) 8.1.xx and later, upgrading to Smart IT 1.5.1 and MyIT 3.3 restarts the AR System plug-in server process. The server restart causes a downtime of a few seconds. If you are on BMC Remedy ITSM 8.0, you have the option to restart the AR System server later. This allows you to schedule a planned downtime.

StepActionAdditional information
1Resolve issues indicated by the installer, if any

Ensure that all the following pre-install checks run by the installer are successful before proceeding with the installation:

  • Disk space
  • JAVA runtime version
  • Database version
  • Directory permissions
  • MyIT/Smart IT installed version
  • Components operation status (running Social, MyIT, Mongo are brought to required state as part of installation/upgrade)

Installation does not proceed if the pre-install check detects inconsistencies in the required components.

2 Upgrade MongoDB

The bundled MongoDB version can only be used for a fresh installation. In an upgrade scenario, the MongoDB is not upgraded automatically by the installer. In an upgrade scenario, you must manually upgrade the MongoDB.

  • If your existing MongoDB version is 2.4.x, upgrade the MongoDB as part of the pre-installation activities.
  • If your existing MongoDB version is 2.6.x, upgrade the MongoDB as part of the post-installation activities.


Perform the Smart IT and MyIT upgrade

Do not use Xming to install the Smart IT and MyIT server, because it might not perform reliably during installation. Instead, use VNC, MobaXterm, or any other client.
4 Verify the Smart IT and MyIT server installation Verify whether the upgrade is successful.

Stage 3: Review Smart IT and MyIT configurations 

StepActionAdditional information

Enabling a maps license

After installing or upgrading Smart IT or MyIT, location maps do not appear. In order to display location maps, follow the procedure to obtain and enable a supported maps license.

2 Configuring SSL for web and mobile clients

To provide communication security among applications, configure SSL for the Apache Tomcat server. If you enabled SSL as part of the installation , SSL is already configured.

3 Modifying Smart IT or Smart IT Social server ports Post-upgrade, you might need to change the ports if you did not specify an open port during installation, or if these ports are in use. These ports are used to connect the web and mobile Smart IT clients to the Smart IT server.
4 Integrating Smart IT with LDAP for broadcasting

This topic describes how to configure the integration of LDAP for broadcasting with Smart IT and MyIT.

You can integrate Smart IT and MyIT with LDAP so that you can distribute broadcasts to your LDAP distribution groups. If configured, these groups are also used when  setting up services  on the MyIT Administration Console.


Error rendering macro 'link-window'

[com.ctc.wstx.exc.WstxLazyException] Duplicate attribute 'bmc'. at [row,col {unknown-source}]: [4,166]

This topic describes how to configure the integration of BMC Remedy Single Sign-On with Smart IT and MyIT .

BMC Remedy Single Sign-On authentication applies to both the universal client and to mobile applications. When a user logs in to a mobile device, the user is prompted to enter the hostname and port. If the server has SSO enabled, the mobile client opens a browser to the SSO login page. The SSO server sets the SSO cookies after authentication on to the device browser. When the user relaunches the application, if the cookies are not expired, the mobile client displays the application. If the cookies are expired, the user is shown the login page again for authentication.


Stage 4: Review Smart IT configurations 


Links in this table direct you to the Smart IT online documentation.

StepActionAdditional information
1 Integrating BMC Remedy ITSM with the Social Server for Smart IT The information shown on timelines and feeds is uploaded from BMC Remedy IT Service Management (BMC Remedy ITSM) and processed by the Social Server. To import the existing BMC Remedy ITSM data into the Social Server, use the BMC Remedy with Smart IT onboarding utility.
2 Disabling collision management and impact analysis in Smart IT If your organization does not use collision management or impact analysis functionality for Change Management, you can choose to disable these features.
3 Smart IT Permissions To give users access to Smart IT, assign them the required user permissions.
4 Review the login ID requirements for service requests in Smart IT

Note: This is specific to Smart IT.

If your environment uses BMC Service Request Management, ensure that the People records for non-support staff include a login ID. Service requests cannot be submitted for a customer who has a People record with no login ID.

Service requests cannot be submitted, because the Smart Recorder uses the login ID to show available service request templates for that person.

5 Adding custom fields to your views using Smart IT

You might have custom fields defined for BMC Remedy IT Service Management, that you would like to display in the Smart IT user interface. You might also want to display out-of-the-box BMC Remedy ITSM fields that are not shown by default in Smart IT.

When you add custom fields, they appear in the area that you specify in Screen Configuration. For example, you can add a custom field to the Assignment area of the Incident View. The custom field then appears in incident ticket details, with the assignment information. If you add custom fields to the Person Profile, those fields also appear in the customer information displayed in the Smart Recorder.

6 Enabling full text search Full text search (FTS) is an optional feature that you can install with the BMC Remedy AR System server. To use FTS with Smart IT, you must install BMC Remedy Knowledge Management, even if you do not plan to create knowledge articles. To use the complete FTS capability, you must configure and enable the feature.
7 Enabling SSL for Openfire chat server Complete the procedure to enable a secure sockets layer (SSL) for the Openfire chat server that runs with BMC Remedy with Smart IT (Smart IT).
8 Integrating Smart IT with phone systems If your help desk phone system integrates with other web tools, you can configure it to start Smart Recorder directly from the phone system UI.
9 Configuring notifications for Smart IT Configure your notifications. You can choose to use BMC Remedy ITSM notifications, for example if you have customized notifications. You can enable localized Smart IT notifications for mobile clients.
10 Configuring automatic following in Smart+IT Configure whether users automatically receive updates for new knowledge articles, incidents, work orders, tasks, service requests, change requests, and broadcasts that they create. By default, users only receive updates for new knowledge articles that they create.
11 Configuring security options for Smart IT Configure security options. Limit the types of files that users can attach to Smart IT records. Update the content security policy to allow users to attach images from external sources to knowledge articles. If you have Openfire chat installed, edit the  openfire/conf/cross-domain-policy.xml  file to only allow access to data from a specific domain (or domains).
12 Disabling application modules in Smart IT If your organization does not use BMC Service Request Management, BMC Work Order Management, BMC Change Management, or BMC Problem Management in Smart IT, you can choose to disable these application modules.
13 Configuring Smart Recorder to search by last name or first name By default, Smart Recorder locates customer profiles by assuming a "first name, last name" order when you enter the person's name.  You can configure Smart IT so that the Smart Recorder searches by the customer's last name as well as the first name.
14 Configuring Smart Recorder to exclude customer and contact names from ticket title and description While creating a ticket using Smart Recorder, the customer name and contact names are automatically included in the title and description of the ticket. You can choose to exclude the customer name and contact names from the title and description by changing the default value of a configuration setting.
15 Configuring the reconciliation method for assets in Smart IT When you install Smart IT 1.5, a new  Sandbox Job Calls  setting is added to the AST:AppSettings form. This setting controls how reconciliation calls (requests) are processed for assets.

Stage 5: Review MyIT configurations 

StepActionAdditional information

Setting up administrator authentication

The MyIT server supports both user and administrator logons. Both types of logons are authenticated using BMC Remedy Action Request AR System (BMC Remedy AR System). To assign MyIT administration permissions to BMC Remedy AR System users, you add the users to the  MyIT Admin  group in BMC Remedy AR System. The system creates this group automatically during installation.

Assigning administrator permissions

Administrators can grant or restrict access to the areas of the MyIT Administration Console for other administrator.

Setting the default service request definitions for MyIT

If you use BMC Service Request Management to process requests and incidents submitted by MyIT users, you must create a series of service request definitions (SRDs) specifically for use with MyIT. You configure SRDs in the BMC Service Request Management Console.

Localizing titles and messages

  • Contact options that appear when a user taps Account Problems on the Login screen or IT Contact Information from the Assistance screen.
  • The name of the screen that lists a user’s appointments and the instructions that tell users what to enter when creating an appointment.
  • The names of asset actions that appear when a user clicks an icon on a floor map. Using a similar procedure, you can edit asset actions.

Changing terminology used in the application

MyIT enables you to customize the names of items that appear on your users' desktop browsers and mobile devices. For example, you can update the name of the service desk to My Company Service Desk.

Changing client functionality options

Within MyIT, you can enable and disable features that you might not want to use immediately in your deployment. For example, if you are not set up to support location services, you can disable that functionality. You can also configure the settings for features such as the Contact IT button and Virtual Chat cross-launch. 

Making configuration changes to integrated applications

You can change the settings that MyIT uses to connect to the following applications:

  • BMC Service Request Management
  • BMC Remedy IT Service Management (BMC Remedy ITSM, the enterprise application)
  • BMC Remedy Action Request System (BMC Remedy AR System, dedicated to the MyIT application)
8 Configuring multitenancy The multitenancy feature of BMC Remedy IT Service Management (BMC Remedy ITSM) provides the ability to segregate data by operating company and customer company. 
9 Configuring email notifications To allow MyIT users to accept email notifications for services, you must configure your company's mail server information and verify that users have valid email accounts with the specified server. Users can then select email notifications for specific services.
10 Integrating with BMC TrueSight Operations Management If you enable the integration of BMC TrueSight Operations Management , services monitored by TrueSight Operations Management are listed in MyIT and the availability status is updated by BMC TrueSight Operations Management.
11 Setting up VM requests through BMC Cloud Lifecycle Management After integrating MyIT with BMC Cloud Lifecycle Management, MyIT users can view and request available VM offerings as part of the Unified Catalog. Create sections and then add BMC Cloud Lifecycle Management offerings to the section.
12 Setting up service requests through BMC Service Request Management To create a service catalog, MyIT pulls in services, apps, VMs, and other resources available to employees from different sources, including BMC Service Request Management. 
13 Integrating MyIT with BMC HR Case Management

Self-service users use MyIT to open HR cases and to search HR knowledge articles. BMC HR Case Management can be installed either on the same server with BMC Remedy IT Service Management (BMC Remedy ITSM) or on a separate server.

Note: The BMC HR Case Management server requires BMC Remedy Action Request System 9.1.

14 Configuring MyIT Service Broker as a provider MyIT Service Broker enables you to collaborate with others within your organization or external third parties, to on board, manage, deliver, and analyze the use of IT and business services from multiple sources.


Stage 6: Deploy Smart IT and MyIT to users

StepActionAdditional information
1 Deploying Smart IT to your users in the BMC Remedy with Smart IT online documentation.IT users access Smart IT and MyIT through Apple iOS and Google Android mobile clients, as well as through the universal client. The universal client provides access through a web browser.

Deploying MyIT to your users

Related topics

Uninstalling Smart IT and MyIT

Was this page helpful? Yes No Submitting... Thank you