Space banner

 

This documentation supports the 19.08 version of Change Management.

To view an earlier version, select the version from the Product version menu.

Configuring approval mappings

Approval mappings are applicable for level-type approval processes. For the mapping to be applied to the selected phase, the values of the fields on the request must be the same as the values of the fields defined in the approval mapping. The approvers are selected based on an exact match to the configured approval mappings. A blank field in the approval mapping form implies any match.

Example

You set up the approval mapping with the following values:

  • Approval for: Individual, First Name: Allen, Last Name: Allbrook, Approval Indicator: Change, Phase Name: Review
  • On the Impacted Area/CI tabCompany: Calbro Services, Organization: Information Technology, Department: Application Development

When the change reaches the Review approval phase, Allen Allbrook is listed in the approvers table of the change, only when one of the Impacted areas listed for the change request matches the following field values:

  • Company = Calbro Services
  • Organization = Information Technology
  • Department = Application Development

The mapping is not applied if any of these values are different.

Before you begin

Configure the approval processes. For more information, see Setting up approval process configuration records for your company.

Configuring approval mappings

  1. From the Application Administration console, click the Custom Configuration tab.
  2. From the Application Settings list, select Approval > Approval Mappings for the application for which you want to configure approvals.
  3. Click Open.
  4. On the Approver Mappings form, select the appropriate value from Approval Indicator.
    This field is used to identify the application that the approval mapping record is associated to. For the Change Management application, the value must always be set to Change.
    The form refreshes, and the appropriate tabs and fields for the selected approval indicator are displayed.

    Important

    Select the criteria that should be met to map an approver to the approval phase. The approver is mapped to the selected phase only when all the defined criteria are met.

  5. For Phase Name, select which approval phase needs an approval mapping in the application.

    Important

    When you select a phase name, the Phase Company is automatically populated.

    This field is used to identify which approval process configuration record the approval mapping record is associated to. The menu that is attached to the Phase Name field shows you all the approval process configuration records for Change by Company and then by Phase Name. Approval phases are used to define when the approval is required during the lifecycle of the application request and maps the Approval Process Name that will be used by the Approval Server. The mapping between the application status, Phase Name, and Approval Process is done in the Approval Process Configuration form.
    For example, Review phase of Change Management indicates that the change will be sent for approval when it reaches the Request for Authorization status and will use the Change Level CI-IA - Review process.

    Recommendation

    Select a user who has access to the company selected in Phase Company.

  6. Enter information in the other fields as appropriate.

    Field name

    Description

    Approval For

    This field is used to identify who the approvers are when this mapping is selected. You can select one of the following options:

    • Individual—Select this option when you want to have an individual named an approver. Enter the individual's last name. The Approver ID (or logon name) is automatically populated.
    • Group—Select this option when you want to have a specific support group as the approver. Only members of the named support group with the functional role of Infrastructure Change Approver are selected as approvers. Also, out-of-the-box, only one member of the support group needs to approve for the phase to be considered approved. If you select this option, the First Name, Last Name, and Approver ID fields are replaced by Support Company, Support Organization, and Support Group Name. Select the values for each field. The choices available in the Support Organization menu list depend on the option that you select for Support Company. The choices available in the Support Group menu list depend on the option that you select for Support Organization.
    • Inherent Group/Role—Select this option, when you want to have the application dynamically select the approvers based on the named support group in either the Change Coordinator, Change Manager, Change Requester, or the Change Implementer Group field. If you select this option, the Inherent Group and Functional Role fields are displayed. The Functional Role field is used to help narrow down the selection of the individuals who will be selected as the approvers from the dynamically selected support group. For example, if you set the value of the Inherent Group field as Change Manager Group and the value of the Functional Role field as Infrastructure Change Manager, then if this mapping is selected, the approvers will be members of the named Changer Manager Group who have the functional role of Infrastructure Change Manager.

      Important:
      The Change Coordinator Group is named the Change Assigned Group and the Change Implementer Group is currently hidden on the Change form and is only available if the field is available because of a customization. 

      Best practice

      We recommend that you keep the Change Implementer related fields hidden and use the tasks to determine the change implementers.

    • Individual Based on CI Role—Select this option, when you want the application to dynamically select the approvers based on a CI that is related to the change request. The Role field is used to identify the individual that is related to the CI with the selected role. The CI selection is done from the mapping section, where you can either select a CI based on the CI Type (for example, Application, Computer System, Business Service, and so on) or based on the CI Name and CI ID. For example, if you set the value of the Role field to Managed by and the value of the CI Type field to Business Service, then if this mapping is selected, the approvers will be individuals related to the Business Service CI with the Managed by relationship. The individuals are related to a CI by the following roles:
      • Approved By
      • Managed By
      • Created By
      • Owned By
      • Supported By
      • Used By
    • Group Based on CI Role—Select this option, when you want the application to dynamically select the approvers based on a CI that is related to the change request. The Role field is used to identify the support group that is related to the CI with the selected role. The approvers are then selected from that support group where the individuals have the functional role as Infrastructure Change Approver. The CI selection is done from the mapping section where you can either select a CI based on the CI Type (for example, Application, Computer System, Business Service, and so on) or based on the CI Name and CI ID. For example, if you set the value of the Role field as Managed by and the value of the CI Type field as Business Service, then if this mapping is selected, the approvers will be an individuals that have the functional role as Infrastructure Change Approver for the support group that is related to a Business Service CI with the Managed by relationship. The support groups are related to a CI by the following roles:
      • Approved By
      • Managed By
      • Created By
      • Owned By
      • Supported By
      • Used By

    For more information, see Creating approval mappings for people and support groups related to CI for BMC Change Management.

    Important: If you select the Group option, all the users who belong to the support group and have the corresponding approver functional role (for example, Infrastructure Change Approver for Change Management) are set up as approvers. By default, only one approver in the group must sign off on the approval before it can move to the next stage.

    First Name

    If you select Approval For Individual, this field is displayed. Enter the first name of the approver.

    Last Name

    If you select Approval For Individual, this field is displayed. Use auto-fill to enter the approver's last name.

    Approver ID

    If you select Approval For Individual, this read-only field is displayed. The Login ID of the approver is automatically included when you select the approver.

    Assignment Availability

    This is a read-only field and is auto-populated and synchronized automatically.

    • For individuals, the value is displayed based on the Profile status on the People form. If the value on the People form is Enabled, this value is set to Yes to specify that the individual is available for the approval.
    • For Support Group mapping, this value is set to Yes if the support group has at least one valid user with an Approval role (Infrastructure Change Approver for Change Management).

    Submitter

    This field is auto-populated with the logon name of the user who is creating this approver mapping.

    Status

    Indicates the current status of the approval mapping record, that is, of the group or individual approving the request.

    For the approver mapping record to execute, select a status to Enabled. To temporarily disable the approval mapping, set the status to Offline. All other status options are for informational purposes only.

    Level

    This field is used to create a level or tiered approvals for the same phase and mapping criteria. Specify the level of approval for the individual or group. The level number defines the routing sequence within the approval hierarchy. Enter a number to determine the order in which the approvers are defined. Approvers who are assigned lower numbers, approve the requests before those who have higher numbers.

    For example, if you want a user to get the first approval request for the Business Approval Phase and then if that user approves to have the Change Advisory Board group get the second approval request for this phase, then:

    Set the first approval mapping entry as:

    • Phase Name—Business Approval
    • Approval For—Individual
    • Level—0

    And the second approval mapping entry as:

    • Phase Name—Business Approval
    • Approval For—Group
    • Level—1

    Description

    Enter a description for this approver mapping.

    Support Company

    If you selected Approval For Group, enter the support company.

    Support Organization

    If you selected Approval For Group, enter the support organization.

    Support Group Name

    If you selected Approval For Group, enter the support group name.

    Inherent Group

    If you selected Approval For Inherent Group/Role, enter the inherent group name (for example, Change Assigned Group).

    Functional Role

    If you selected Approval For Inherent Group/Role, enter the functional role (for example, Infrastructure Change Approver).

  7. To specify the location, on the Impacted Area/CI tab, specify the Company, Region, Site Group, and Site fields. If required, specify the Organization and Department for the impacted area.
    This maps the approval process when the location matches the change location specified for the Requester of the change request. For an example about adding IA information to approval mapping, see Approvals generated based on Impacted Areas.
  8. To specify the CI, on the Impacted Area/CI tab, specify whether the CI is selected by type or by name.
    • If you select On CI Type, select a specific CI type from the menu.
    • If you select On CI Name, enter the name of a specific CI.
  9. To map approvers based on additional criteria, complete the fields on the additional tabs that are displayed, which depend on the value that you have selected for the Approval Indicator field. For example, if you select Change, the Categorization, Role, and Advanced Criteria tabs are displayed.

The approval mapping now applies when values specified on a record exactly match the values selected in the approval mapping.

Was this page helpful? Yes No Submitting... Thank you

Comments