Installing Remedy SSO in the standalone mode silently

Where you are in the Installation process

The silent (or unattended) installation obtains the required user inputs from the tsso_silent.options file, which is bundled along with the installer.

To install Remedy SSO using the silent TrueSight installer

1. Log in to the host computer on which you want to install Remedy SSO, and delete all the files from the temporary directory:

   • (Windows) %temp%

   • (Linux) /tmp

2. Extract the downloaded zip files (the installer) to a temporary location outside the following location to avoid any file sharing conflicts:

   • (Windows)C:\Program Files

   • (Linux) /opt

3. You will need to type the database administrator and database user passwords in an encrypted form in the tsso_silent.options file in Step 5. You can encrypt these passwords using the TrueSightRSSOMaintenanceTool through the wizard or command line interface:

    Encrypt password using the wizard

   1. Open the TrueSightRSSOMaintenanceTool by navigating to:
      • (Windows) <DownloadLocation>\RSSO\Windows\Disk1\Utility
      • (Linux) <DownloadLocation>/RSSO/Linux/Disk1/Utility 
   2. Run the tool, and click the Encrypt tab.
   3. Type the password, confirm it, and click Encrypt.
   4. Note down the encrypted password (from the Encrypted Password field).
    Encrypt password using the command line interface

   1. Navigate to the following directory:
      • (Windows) <DownloadLocation>\RSSO\Windows\Disk1\Utility
      • (Linux) <DownloadLocation>/RSSO/Linux/Disk1/Utility 

   2. Run the following command:

      • (Windows)

        TrueSightRSSOMaintenanceTool.cmd -silent -encrypt -encrypt -password=<password> -confirm_password=<password>

      • (Linux)

        ./TrueSightRSSOMaintenanceTool.sh -silent -encrypt -encrypt -password=<password> -confirm_password=<password>

        Note

        (Linux) If the password contains special characters, enclose the password using single quotes as shown in the following example:

        ./TrueSightRSSOMaintenanceTool.sh -silent -encrypt -encrypt -password='<password>' -confirm_password='<password>'

   3. Note down the encrypted password.

4. In the extracted folder, locate the tsso_silent.options file:

   • (Windows)<DownloadLocation>\RSSO\Windows\Disk1\

   • (Linux) <DownloadLocation>/RSSO/Linux/Disk1/

5. Open and edit the tsso_silent.options file. The tsso_silent.options is a text file that defines the installation properties in the form of a prefix tag followed by a property name and value pair. You can either retain the default values for the properties or change them, and save the file.

    Property details

   Prefix tags for the silent installation properties:

   • -P: Precedes the directory properties

   • -A: Precedes the application features

   • -J: Precedes the Java properties

   Property name	Description
   Installation location
   -P installLocation	You can retain the following default installation directory path or type a new path: (Windows)C:\Program Files\BMC Software\TrueSightRSSO (Linux) /opt/bmc/TrueSightRSSO Examples:  (Windows) -P installLocation=C:\Program Files\BMC Software\TrueSight\TrueSightRSSO (Linux) -P installLocation=/opt/bmc/TrueSightRSSO
   Installing features
   -A <feature name>	Retain the default feature value.  Default value: featureTrueSightRSSO Example: -A featureTrueSightRSSO
   Database settings
   -J PG_TYPE	Type one of the following values: 0 (PostgreSQL - Packaged): Indicates that you want to install PostgreSQL database packaged with the installer. 1 (PostgreSQL - External): Indicates that you want to use an existing (or external) PostgreSQL database instance. Default value: 0 Example: -J PG_TYPE=0
   -J DB_IS_USER_EXIST	Type the database user preference: If PG_TYPE is set to 0 (PostgreSQL - Packaged): Set the value to false to indicate that you want to create a new database user for managing PostgreSQL database operations. If PG_TYPE is set to 1 (PostgreSQL - External): Set the value to true or false based on the following: true: Indicates that you want to use an existing database user for managing the PostgreSQL database operations. false: Indicates that you want to create a new database user for managing the PostgreSQL database operations. Default value: false Example:-J DB_IS_USER_EXIST=true
   -J DB_HOST	Type the name of the host computer based on the PostgreSQL database type (PG_TYPE) that you selected: If PG_TYPE is set to 0 (PostgreSQL - Packaged): localhost If PG_TYPE is set to 1 (PostgreSQL - External): Name of the host computer running the PostgreSQL database instance that you plan to use. Default value: localhost Example:-J DB_HOST=localhost
   -J DB_POSTGRES_DBNAME	Type the database name based on the PostgreSQL database type (PG_TYPE) that you selected: If PG_TYPE is set to 0 (PostgreSQL - Packaged): Name of the database that you want to create. If PG_TYPE is set to 1 (PostgreSQL - External): Name of the existing PostgreSQL database instance. Ensure that the PostgreSQL instance that you plan to use is not shared by the Presentation Server. Default value: rsso Example:-J DB_POSTGRES_DBNAME=rsso
   -J DB_PORT	Type the port number based on the PostgreSQL database type (PG_TYPE) that you selected: If PG_TYPE is set to 0 (PostgreSQL - Packaged): Port number that you want to configure to connect to the database. If PG_TYPE is set to 1 (PostgreSQL - External): Port number used while installing the existing PostgreSQL database. Default value: 5438 Example:-J DB_PORT=5438
   -J DB_ADMIN	Type the name of the database administrator user (superuser) for managing the Remedy SSO operations. Default value: postgres Example:-J DB_ADMIN=postgres Note: This input is automatically stored in lowercase.
   -J DB_ADMIN_PWD	Type the encrypted database administrator password that you created in Step 3. If PG_TYPE is set to 0 (PostgreSQL - Packaged): Password that you want to assign to the database administrator. If PG_TYPE is set to 1 (PostgreSQL - External): Password corresponding to the existing database administrator. Example: -J DB_ADMIN_PWD=DES\:3d93ab9b35c5deea9d7d64484b0c78fc
   -J DB_ADMIN_PWD_CNFRM	Re-type the encrypted password. You need not do this if you have selected PostgreSQL - External and you plan to use an existing user (superuser) for managing the Remedy SSO operations. Example: -J DB_ADMIN_PWD_CNFRM=DES\:3d93ab9b35c5deea9d7d64484b0c78fc
   -J DB_USER	Type the database user name. If PG_TYPE is set to 0 (PostgreSQL - Packaged): Database user name that you want to use to manage the PostgreSQL database operations. If PG_TYPE is set to 1 (PostgreSQL - External): Database user name based on the type of the user that you want to use to manage the PostgreSQL database operations: If you want to create a new user: New database user name If you want to use an existing user: Existing database user name Default value: rsso_user Example: -J DB_USER=rsso_user Note: This input is automatically stored in lowercase.
   -J DB_USER_PWD	Type the encrypted database user password that you created in Step 3. PostgreSQL Packaged: Password that you want to assign to the database user. PostgreSQL External: Password based on the type of the user that you want to use to manage the PostgreSQL database operations: If you want to create a new user: Password that you want to assign to the new database user. If you want to use an existing user: Password corresponding to the existing database user. Example: -J DB_USER_PWD=DES\:4e14ab9b35c5dffa9d7d64484b0c78fd
   DB_USER_PWD_CNFRM	Re-type the encrypted password. You need not do this if you have selected PostgreSQL - External and you plan to use an existing user (superuser) for managing the Remedy SSO operations. Example: -J DB_USER_PWD_CNFRM=DES\:4e14ab9b35c5dffa9d7d64484b0c78fd
   Tomcat configuration
   TOMCAT_HTTP	Type the HTTP port that you want to use to communicate with Remedy SSO. Default values: (Windows) 88 (Linux) 8088 Example:-J TOMCAT_HTTP_PORT=88
   TOMCAT_HTTPS	Type the HTTPS port that you want to use to communicate with Remedy SSO. By default, the installer configures Remedy Single Sign-On in HTTPS. If you want to use the HTTP, you must manually configure it anytime as a post-installation activity . Default values: (Windows) 448 (Linux) 8048 Example:-J TOMCAT_HTTPS_PORT=448
   Cookie domain
   -J COOKIE_DOMAIN	This is the cookie domain that you want to use to access Remedy SSO. It must be same as the network domain of host computer on which you are installing Remedy SSO or one of its parent domains. For example: If the host computer on which you want to install Remedy SSO belongs to apps.bmc.com, then your cookie domain must be bmc.com. Default value: bmc.com Example:-J COOKIE_DOMAIN=bmc.com
   -J SERVER_FQDN	Type the fully qualified domain name of the server on which you plan to install Remedy SSO. Example: -J SERVER_FQDN=host1.bmc.com

6. From the command prompt, run the following command to start the installation. Type the complete path to the tsso_silent.options file in the command. If the path includes a blank space, enclose the path within double quotes. However, installation occurs in the background.

   A local installation may take up to 15 minutes.
   Syntax:

   • (Windows)setup.exe -i silent -DOPTIONS_FILE="<path_to_tsso_silent.options_file>"
   • (Linux) ./setup.bin -i silent -DOPTIONS_FILE="<path_to_tsso_silent.options_file>"

   Examples:

   • (Windows - Path without space) setup.exe -i silent -DOPTIONS_FILE=C:\Disk1\tsso_silent.options
   • (Windows - Path with space) setup.exe -i silent -DOPTIONS_FILE="C:\temp folder\Disk1\tsso_silent.options"

   • (Linux - Path without space)./setup.bin -i silent -DOPTIONS_FILE=/opt/Disk1/tsso_silent.options
   • (Linux - Path with space)./setup.bin -i silent -DOPTIONS_FILE="/opt/temp folder/Disk1/tsso_silent.options"

7. You can periodically check the installation status by checking the truesightrsso_install_log.txt file located at: 

   • (Windows)%temp%

   • (Linux)  /tmp

8. Search for the following log message in the truesightrsso_install_log.txt file to ensure that Remedy SSO is installed successfully:
   Remedy Single Sign-On 18.02.00 for TrueSight 11.3.01 install succeeded.

   Note:

   BMC Recommends that you also open the remedysso_install_log.txt log file and verify if there are warnings and errors that need to be fixed. Contact BMC Support for Remedy SSO to fix any unresolved errors or warnings.

   • (Windows)<installationDirectory>\rsso\RemedySSO\logs\

   • (Linux) <installationDirectory>/rsso/RemedySSO/logs

9. Verify that the following environment variable points to the Remedy SSO installation path:

   • (Windows) %TRUESIGHTRSSO_HOME%

   • (Linux) $TRUESIGHTRSSO_HOME

10. You can either construct the Remedy SSO URL or locate the URL in the log file:

    • To define the URL, use the format: http(s)://<rsso_servername_FQDN>:<tomcat_port>/rsso
    • To locate the URL:
      1. Open the truesightrsso_install_log.txt log file from:
         
         • (Windows)<installationDirectory>\rsso\logs\

         • (Linux) <installationDirectory>/rsso/logs

      2. Search for the LOG EVENT that has the product URL as shown in the following example:

         • (Windows) LOG EVENT {Description=[PRODUCT URL],Detail=[product url: https://HostA.bmc.com:448/rsso]}

         • (Linux) LOG EVENT {Description=[PRODUCT URL],Detail=[product url: https://HostA.bmc.com:8048/rsso]}

11. Launch the Remedy SSO URL in a browser and log in to the Remedy SSO console using the default Admin credentials:

    • User name: Admin

    • Password: RSSO#Admin#

12. Change the password for the Admin user. Click Admin > Change Password.

13. Log out of the Remedy SSO console, and log in with the new Admin credentials.

    Your installation is complete if you are a Windows user.

14. (Linux) Configure the Remedy SSO service to restart automatically each time the Remedy SSO server is restarted:

    1. Log in to the host computer as a root user.

    2. From the command line, go to <installationDirectory>/rsso/bin, and run the following command:
       ./rsso service register <nonRootUserName>

       <nonRootUserName> refers to the name of the non-root user that you used for installing Remedy SSO.

    Your installation is complete.

Next step in the Installation process

Step 3 Phase B — Now that you have successfully installed Remedy SSO, you must set up the Remedy SSO server.