Skip to Content

CREGSYM view

This topic describes the CREGSYM view.

Warning

Note

The CREGSYT, CREGSYA and CREGSYM views replace the CREGSYS view. The CREGSYS view displays the same data as CREGSYT.

Related topic

Region-views

To display detailed information about the IBM CICS region settings related to monitoring and statistics settings, and WLM health attributes, perform one of the following actions:

  • Hyperlink from the Monitoring and Statistics field of the EZCFSSI menu.
  • Enter CREGSYM [target] on the COMMAND line, where target is the specific or generic name of a target CICS region.

The following figure is displayed:


(BMC.AMIOPS.SPE2210)

ddmmmyyyy  hh:mm:ss ------ BMC AMI Ops WINDOW INTERFACE (Vv.r.mm) --------------
COMMAND  ===>                                                 SCROLL ===> PAGE   
CURR WIN ===> 1        ALT WIN ===>                                               CURR WIN ===> 1        ALT WIN ===>                                                                                                                        
>W1 =CREGSYM==========(BCVDF*===*=======)ddmmmyyyy==03:13:29====MVCICS===D====3============================================================================
CMD Target   CICS    Mntr Other Rcrd UOW    SMF Data    Time  Mntr LRT   Appl Name  Rcrd Conv  Rcrd Excp Rcrd Idnt Rcrd Perf Rcrd Res   DPL Fil TSQ URI Web
---          SYSID   Rcrd Mntr  Syncpoints  Compression Stamp  Freq       Support    Waits      Class     Class     Class     Class     Lmt Lmt Lmt Lmt Lmt
    BCVDF710 F71C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME CONVERSE   EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8 N/A N/A
    BCVDF730 F73C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME CONVERSE   EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8   0   0
    BCVDF740 F74C    ON   RMI   NOSYNCPOINT COMPRESS    LOCAL 00:00:00   NOAPPLNAME NOCONVERSE EXCEPT    NOIDNTY   PERF      NORESRCE     0   8   8   0   0

Scrolled right

ddmmmyyyy  hh:mm:ss ------ BMC AMI Ops WINDOW INTERFACE (Vv.r.mm) --------------------------------------  
COMMAND  ===>                                                                                           
CURR WIN ===> 1        ALT WIN ===>                                                                     
<W1 =CREGSYM==========(BCVDF*===*=======)ddmmmyyyy==03:13:29====MVCICS===D====3=========================
CMD Target   Stats  Stats    Stats    Stats    WLMH WLMH WLMH WLMH       Health  SRR                    
---          Record Interval Next Int EOD Time Val  Adjv Intv OpenSt     Check   Task                   
    BCVDF710 OFF    01:00:00 00:00:00 00:00:00  100   25   20 OPEN       N/A      N/A                   
    BCVDF730 OFF    01:00:00 00:00:00 00:00:00  100   25   20 OPEN       N/A      N/A                   
    BCVDF740 OFF    01:00:00 00:00:00 00:00:00  100   25   20 OPEN       CHECK      0                   
  
ddmmmyyyy  hh:mm:ss ------ BMC AMI Ops WINDOW INTERFACE (Vv.r.mm) --------------
COMMAND  ===>                                                 SCROLL ===> PAGE   
CURR WIN ===> 1        ALT WIN ===>                                              
>W1 =CREGSYM==========(CURRSYS==*=======)ddmmmyyyy==hh:mm:ss====MVCICS===D===20
CMD Target   CICS    Mntr Other Rcrd UOW    SMF Data    Time  Mntr LRT   Appl N
---          SYSID   Rcrd Mntr  Syncpoints  Compression Stamp  Freq       Suppo
    BCVCB680 B680    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCB681 B681    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCB682 B682    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCB683 B683    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCD670 D670    ON   NORMI NOSYNCPOINT NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCD680 D680    ON   NORMI NOSYNCPOINT NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVCP67E P67E    ON   NORMI NOSYNCPOINT COMPRESS    GMT   00:15:00   NOAPPL
    BCVCP68E P68E    ON   RMI   NOSYNCPOINT COMPRESS    GMT   00:15:00   NOAPPL
    BCVDCMAD CMAD    ON   RMI   SYNCPOINT   COMPRESS    LOCAL 00:00:00   NOAPPL
    BCVDK640 K64D    ON   NORMI SYNCPOINT   N/A         GMT   00:15:00   NOAPPL
    BCVDK650 K650    ON   NORMI SYNCPOINT   NOCOMPRESS  GMT   00:15:00   NOAPPL
    BCVDK660 K660    ON   NORMI SYNCPOINT   NOCOMPRESS  GMT   00:15:00   NOAPPL
    BCVDK670 K670    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVDK680 K680    ON   NORMI SYNCPOINT   NOCOMPRESS  LOCAL 00:00:00   NOAPPL
    BCVDS64D S64D    ON   NORMI NOSYNCPOINT N/A         GMT   00:00:00   NOAPPL
    BCVDS65D S65D    ON   NORMI NOSYNCPOINT NOCOMPRESS  GMT   00:00:00   NOAPPL
    BCVDS66D S66D    ON   RMI   NOSYNCPOINT COMPRESS    GMT   00:00:00   NOAPPL
    BCVDS67D S67D    ON   RMI   NOSYNCPOINT COMPRESS    GMT   00:00:00   NOAPPL
    BCVDS68D S68D    ON   RMI   SYNCPOINT   COMPRESS    GMT   00:05:00   NOAPPL
    BCVDWUID WUID    ON   RMI   SYNCPOINT   COMPRESS    LOCAL 00:00:00   NOAPPL

Actions

The CREGSYM view supports the following line command actions: 

Line command

Description

SET

The SET command allows you to modify the attributes that are associated with the monitoring and statistics facilities as follows:

  • Monitor recording attributes
    • SMF Data Compression
    • LRT Frequency
  • Monitor options
    • Conversational Tasks
    • Identity Class
    • Transaction Resource Class
    • UOW Syncpoints
  • Monitor limits
    • Maximum DPL Requests
    • Maximum Files
    • Maximum TS Queues
    • URMAP limits
    • Webservices limits
  • Statistics recording attributes
    • Recording Status
    • Recording Interval
    • End Of Day Time
  • Monitoring, statistics facilities, and WLM Health attributes as follows:
    • Adjustment
    • Interval
    • OpenStatus

There are also specific line commands to change some of these values. Press F1 to access the online Help for more information about the equivalent line commands.

Warning

Note

Be sure the field contains exactly the value that you want before pressing Enter to issue the SET command. You must clear the field of any other data to prevent it from being passed as part of the new value.

Commands that set CICS TS Monitor attributes and options

MCS

Set SMF Data Compression to COMPRESS.

MNC

Set SMF Data Compression to NOCOMPRESS.

MVS

Set Conversational Task option CONVERSE.

MNV

Set Conversational Task option NOCONVERSE.

MID

Set Identity Class option IDNTY.

MNI

Set Identity Class option NOIDNTY.

MRS

Set Resource Class option RESRCS.

MNR

Set Resource Class option NORESRCS.

MSP

Set UOW Syncpoint option SYNCPOINT.

MNS

Set UOW Syncpoint option NOSYNCPOINT.

Commands that set CICS TS Statistics recording attributes

SOF

Set Statistics Recording Status to OFF.

SON

Set Statistics Recording Status to ON.

SRC

Perform Statistics RECORD for ALL resources.

SRS

Perform Statistics RECORD and RESETNOW for ALL resources.

SCN Set Statistics, Recording Status, and RECORDNOW option

Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and immediately writes the current statistics.

SSN Set Statistics, Recording Status, and RESETNOW option

Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and resets the statistics to the initial values.

SRN Set Statistics, Recording Status, RECORDNOW, and RESETNOW options

Depending on the current status switches the recording status from ON to OFF or from OFF to ON, and immediately writes the current statistics. Also resets the statistics to the initial values.

Commands that set CICS TS WLMHealth attributes and options

WLC

Set CICS to start decreasing the z/OS WLM health value according to the adjustment value in the specified interval.

WLO

Set CICS to start increasing the z/OS WLM health value according to the adjustment value in the specified interval.

WLI

Set CICS to immediately set the z/OS WLM health value to 0.

Related views

The following views are part of the CREGSYM family of views.


View

Description

CREGSYMZ

To display summarized information about the CICS region settings related to monitoring and statistics settings, enter SUM on the COMMAND line of the CREGSYM view.

CREGSYMD

To display detailed information about the CICS region settings related to monitoring and statistics settings and WLM health attributes, hyperlink from the Mntr Rcd field of the CREGSYM view.

CREGSYSQ

To display the Quick Menu for a specific CICS region, hyperlink from the CICS SYSID field on any of the following views:

  • CREGSYT
  • CREGSYA
  • CREGSYM
  • CREGSYTD
  • CREGSYAD
  • CREGSYMD


 

Tip: For faster searching, add an asterisk to the end of your partial query. Example: cert*

BMC AMI Ops Monitor for CICS 7.3