Window Management Errors (Error errors)
These are messages that occur when attempting to display a message
PC1001E Error creating window data
Reason: There was an error allocating data to display the error window.
Action: Free memory and try again.
PC1002E Error saving window data
Reason: There was an error allocating data to display the error window.
Action: Free memory and try again.
PC1003E Error setting window time-out timer
Reason: There was an error setting the timer to allow an error message to time-out. Further messages will not time-out.
Action: Contact FDR/UPSTREAM Tech Support.
PC1004E Error loading the error window dialog
Reason: When attempting to display a message, the message display dialog was not found.
Action: Make sure that US.RES is in the same directory as UPSTREAM.
PC1009I (US) Debug Message! Call tech support.
Log File Errors (Error Errors)
These are messages that occur when attempting to display a message
PC1010E Error writing to the log file
Reason: There was an error writing to the log file.
Action: See additional messages.
PC1011E Error opening the log file
Reason: There was an error opening the log file.
Action: See additional messages.
PC1012E Error obtaining the message file name
Action: Make sure that you have an upstream.cfg file specified and that it contains a MESSAGEFILE statement pointing to upstream.msg
PC1013E Error opening upstream.msg
Action: Verify that the upstream.msg file is accessible.
PC1014E Insufficient memory
Reason: Error messages will not be buffered.
Action: Close applications or free memory.
PC1015E Error reading message file
Action: Verify that upstream.msg is accessible.
PC1016E Message out of range
Action: Contact FDR/UPSTREAM Tech Support.
PC1017E Duplicate message
Reason: There are two or more messages in the message file with the same message number.
Action: Contact FDR/UPSTREAM Tech Support.
PC1018E Action succeeded
Reason: The specified action was performed and completed successfully.
Action: See additional messages.
PC1019E Action failed
Reason: The specified action was performed but failed.
Action: See additional messages.
PC1021E Insufficient memory
Reason: There was an error allocating memory to hold a pending error message.
Action: Close applications or free memory.
PC1022E Insufficient memory
Reason: There was an error allocating memory to hold the text of a pending error message.
Action: Close applications or free memory.
PC1023E Bad thread for non-fatal error support
Action: Contact FDR/UPSTREAM Tech Support.
PC1024I Error clearing log during %s
Action: See additional messages.
PC1025D File cleared. %lu lines removed %lu lines retained.
PC1026D Clearing: preserving %lu days in file %s
PC1027I Temporary files cleaned up
PC1028D Error copying permissions from %s to %s
PC1029E Insufficient memory for error subsystem.
PC1030D Cannot display messages while unattended
Reason: UPSTREAM could not display the following message title and message while running in an unattended mode.
25.3 USVSS Errors
PC1050E (USVSS) The "System Writer" has unknown components
Reason: While checking the VSS components belonging to VSS writer name "System Writer", either the "System Files" component is missing or a new unknown writer was found. This may indicate that this is a new version of the Windows OS that is currently not fully supported by UPSTREAM.
Action: Contact FDR/UPSTREAM Tech Support.
PC1051E (USVSS) Can't check the Hyper-V writer status
Reason: An error occurred while checking the status of the "Microsoft Hyper-V VSS Writer" before starting a component restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC1052E (USVSS) Can't find ADAM instance database file spec
Reason: The adamntds.dit file of an ADAM instance could not be identified. Verification for the adamntds.dit file could not be performed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1053E (USVSS) Can't start ADAM instance verification
Reason: An error occurred while attempting to start the verification process for an ADAM instance database.
Action: Contact FDR/UPSTREAM Tech Support.
PC1054E (USVSS) Can't verify an ADAM instance database
Reason: An error occurred while attempting to verify an ADAM instance database.
Action: Contact FDR/UPSTREAM tech support.
PC1055E (USVSS) Can't open Service Control Manager
Reason: An error occurred while attempting to open a connection to the Service Control Manager in order to check the status of an ADAM instance service.
Action: Contact FDR/UPSTREAM Tech Support.
PC1056E (USVSS) Can't open service
Reason: An error occurred while attempting to open a connection to an ADAM instance service in order to check its status.
Action: Contact FDR/UPSTREAM Tech Support. An error occurred while attempting to get the status of an ADAM instance service.
Action: Contact FDR/UPSTREAM Tech Support.
PC1057E (USVSS) Can't get ADAM service status
Reason: An error occurred while attempting to query the status of an ADAM service.
Action: Contact FDR/UPSTREAM Tech Support.
PC1058E (USVSS) The service is started
Reason: The restore of an ADAM instance cannot be performed while its service is started.
Action: Stop the ADAM instance service and restart the restore.
PC1059I (USVSS) DS authoritative restore succeeded
Reason: An authoritative restore of a Directory Services database was successful.
PC1060E (USVSS) DS authoritative restore failed
Reason: An authoritative restore of a Directory Services database failed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1061E (USVSS) Active Directory restore was unsuccessful
Reason: The restore of the Active Directory was unsuccessful. An authoritative restore of the Active Directory is not possible.
Action: Contact FDR/UPSTREAM Tech Support.
PC1062E (USVSS) An ADAM instance restore was unsuccessful
Reason: The restore of an ADAM instance was unsuccessful. An authoritative restore of the ADAM instance is not possible.
Action: Contact FDR/UPSTREAM Tech Support.
PC1063E (USVSS) Can't parse ADAM instance name
Reason: An error occurred while attempting to parse an ADAM instance name from the name of its VSS writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC1064E (USVSS) Invalid Hyper-V component MovePaths parameter
Reason: The restore options specified for a Microsoft Hyper-V VSS Writer component specifies an invalid MovePaths parameter. The number of target paths specified in the MovePaths parameter value does not match the number of source paths specified.
Action: Contact FDR/UPSTREAM Tech Support.
PC1065E (USVSS) Invalid Target Path suffix
Reason: A target path specified in the value of the MovePaths parameter specified as the restore options of a Microsoft Hyper-V VSS writer component has a suffix that does not match the suffix of the source path that it is paired with. Either the source path has a trailing backslash and the target path does not or the source path does not have a trailing backslash and the target path does.
Action: Contact FDR/UPSTREAM Tech Support.
PC1066E (USVSS) Can't start Exchange verification
Reason: An error occurred while attempting to start the verification process for an Exchange storage group.
Action: Contact FDR/UPSTREAM Tech Support.
PC1067I (USVSS) Can't find ChkSGFiles.dll
Reason: ChkSGFiles.dll (the Exchange Storage Group Consistency Check API) cannot be found. The verification of the Exchange storage group will be skipped.
Action: Contact FDR/UPSTREAM Tech Support.
PC1068E (USVSS) Can't identify the ntds.dit file
Reason: An error occurred while attempting to identify the ntds.dit file for the Active Directory component in order to perform a checksum test.
Action: Contact FDR/UPSTREAM Tech Support.
PC1069E (USVSS) Can't start Active Directory verification
Reason: An error occurred while attempting to start the verification process for the Active Directory database.
Action: Contact FDR/UPSTREAM Tech Support.
PC1070E (USVSS) Can't get an Active Directory Search interface
Reason: An error occurred while attempting to get an Active Directory Search interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC1071E (USVSS) Can't execute Active Directory Search
Reason: An error occurred while attempting to execute an Active Directory Search.
Action: Contact FDR/UPSTREAM Tech Support.
PC1072E (USVSS) Can't get Active Directory Search row
Reason: An error occurred while attempting to get the next row of data from an Active Directory Search.
Action: Contact FDR/UPSTREAM Tech Support.
PC1073E (USVSS) Can't get Active Directory Search column
Reason: An error occurred while attempting to get a column of data from an Active Directory Search.
Action: Contact FDR/UPSTREAM Tech Support.
PC1074E (USVSS) Can't allocate an Exchange Object structure
Reason: While attempting to allocate memory for an Exchange Object structure, there was insufficient memory.
Action: Close applications or free memory.
PC1075E (USVSS) Can't get IADs interface
Reason: An error occurred while attempting to get an IADs interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC1076E (USVSS) Can't get Active Directory attribute
Reason: An error occurred while attempting to read an attribute from an Active Directory object.
Action: Contact FDR/UPSTREAM Tech Support.
PC1077E (USVSS) Can't get domain name
Reason: An error occurred while attempting to get the DNS formatted domain name.
Action: Contact FDR/UPSTREAM Tech Support.
PC1078E (USVSS) Can't search for Exchange servers
Reason: An error occurred while attempting to search for the Exchange servers in the domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC1079E (USVSS) Can't get Exchange server information
Reason: An error occurred while attempting to get the information for an Exchange server.
Action: Contact FDR/UPSTREAM Tech Support.
PC1080E (USVSS) Can't search for Exchange storage groups
Reason: An error occurred while attempting to search for the Exchange storage groups in the domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC1081E (USVSS) Can't get Exchange storage group information
Reason: An error occurred while attempting to get the information for an Exchange storage group.
Action: Contact FDR/UPSTREAM Tech Support.
PC1082E (USVSS) Can't search for Exchange private databases
Reason: An error occurred while attempting to search for the Exchange private databases in the domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC1083E (USVSS) Can't search for Exchange public databases
Reason: An error occurred while attempting to search for the Exchange public databases in the domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC1084E (USVSS) Can't get Exchange database information
Reason: An error occurred while attempting to get the information for an Exchange database.
Action: Contact FDR/UPSTREAM Tech Support.
PC1085E (USVSS) Can't find Exchange server
Reason: An error occurred while verifying the name of an Exchange server.
Action: Contact FDR/UPSTREAM Tech Support.
PC1086E (USVSS) Can't parse Active Directory object GUID
Reason: An error occurred while attempting to parse a GUID for an Exchange storage group or database object from an Active Directory attribute.
Action: Contact FDR/UPSTREAM Tech Support.
PC1087E (USVSS) Can't allocate additional component data
Reason: While attempting to allocate memory for a set of additional component data, there was insufficient memory.
Action: Close applications or free memory.
PC1088E (USVSS) Invalid Exchange storage group restore options
Reason: The specified restore options are invalid for restoring an Exchange storage group component.
Action: Specify a correct set of options for the PLUGINPARAMETERS parameter value. Use one of the following formats: PLUGINPARAMETERS OPTIONS='RestoreToStorageGroup=""' PLUGINPARAMETERS OPTIONS='RestoreToDirectory=""'
PC1089E (USVSS) Can't allocate Exchange storage group restore options
Reason: While attempting to allocate memory for a set of Exchange storage group component restore options, there was insufficient memory.
Action: Close applications or free memory.
PC1090E (USVSS) Can't add new target
Reason: An error occurred while adding a new target for one of the file specs for the specified component.
Action: Contact FDR/UPSTREAM Tech Support.
PC1091E (USVSS) Can't process options
Reason: An error occurred while pre-processing or post-processing the options for the specified writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC1092E (USVSS) Can't check for missing writers
Reason: An error occurred while checking for any VSS writers which are required for a component restore, but are missing.
Action: Contact FDR/UPSTREAM Tech Support.
PC1093W (USVSS) Can't get additional volume information
Reason: While attempting to get the additional information needed for the inclusion of the ASR information in the backup, an error occurred. The backup will continue, but the ASR information will not be included in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1094E (USVSS) Can't set ASR selected flag
Reason: While attempting to add the ASR selected flag to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1095E (USVSS) Can't create RestoreSession key
Reason: An error occurred while attempting to create the "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ASR\RestoreSession" registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC1096E (USVSS) Can't start CSV search
Reason: An error occurred while starting a search for Cluster Shared Volumes (CSVs).
Action: Contact FDR/UPSTREAM Tech Support.
PC1097E (USVSS) Can't find a backup NTFS volume
Reason: None of the volumes that were backed up are NTFS volumes.
Action: Contact FDR/UPSTREAM Tech Support.
PC1098E (USVSS) Can't create directory
Reason: An error occurred while attempting to create a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1099E (USVSS) Can't perform ASR restore
Reason: An error occurred while attempting to perform an ASR restore.
Action: Contact FDR/UPSTREAM Tech Support.
Informational Messages
These are messages that are displayed in message boxes and are often not fatal
PC1101D Communications not loaded or not configured
Reason: APPC or TCP/IP is not loaded or UPSTREAM has not been configured.
PC1102N Dial remote now
Reason: Dial the remote system now. Press the OK button when you are polling
Notification errors
PC1111E Can't allocate a data stream
Reason: While attempting to allocate memory for a data stream there was insufficient memory.
Action: Close applications or free memory.
PC1112E Can't allocate a text line
Reason: While attempting to allocate memory for a text line there was insufficient memory.
Action: Close applications or free memory.
PC1113E Last quoted-printable line is continued
Reason: An error occurred while attempting to decode a set of quoted-printable encoded data. The last line ends with a continuation character and must not.
Action: Contact FDR/UPSTREAM Tech Support.
PC1114E Invalid quoted-printable data character
Reason: An error occurred while attempting to decode a set of quoted-printable encoded data. A character was found which is invalid for quoted-printable encoding.
Action: Contact FDR/UPSTREAM Tech Support.
PC1115E Line to be encoded is too short
Reason: An error occurred while attempting to encode a line with quoted-printable or base 64 encoding. The line is too short.
Action: Contact FDR/UPSTREAM Tech Support.
PC1116E Line for quoted-printable encoding contains CR or LF
Reason: An error occurred while attempting to encode a line with quoted-printable encoding. The line contains either a carriage return or line feed character.
Action: Contact FDR/UPSTREAM Tech Support.
PC1117E Invalid base 64 buffer length
Reason: An error occurred while attempting to decode a set of base 64 encoded data. The length of the encoded data is not a multiple of 4.
Action: Contact FDR/UPSTREAM Tech Support.
PC1118E Invalid base 64 data character
Reason: An error occurred while attempting to decode a set of base 64 encoded data. A character was found which is invalid for base 64 encoding.
Action: Contact FDR/UPSTREAM Tech Support.
PC1119E Premature end of base 64 buffer
Reason: An error occurred while attempting to decode a set of base 64 encoded data. The base 64 encoded data buffer is too short.
Action: Contact FDR/UPSTREAM Tech Support.
PC1120E Can't allocate a context
Reason: While attempting to allocate memory for a data conversion context there was insufficient memory.
Action: Close applications or free memory.
PC1121E Can't read attachment file
Reason: An error occurred while attempting to read an attachment file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1122E Can't open attachment file
Reason: An error occurred while attempting to open an attachment file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1123E Can't position attachment file
Reason: An error occurred while attempting to set the file pointer for an attachment file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1124E Can't reposition attachment file
Reason: An error occurred while attempting to reset the file pointer for an attachment file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1125E Can't reallocate a context
Reason: While attempting to reallocate memory for a data conversion context there was insufficient memory.
Action: Close applications or free memory.
PC1126E Can't adjust attachment file pointer
Reason: An error occurred while attempting to adjust the file pointer for an attachment file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1127E Invalid EMail data format
Reason: An internal FDR/UPSTREAM parameter error occurred while attempting to send an EMail notification message. The EMail data format is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1128E Invalid EMail data type or subtype
Reason: An internal FDR/UPSTREAM parameter error occurred while attempting to send an EMail notification message. The EMail attachment data type or subtype is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1129E Invalid target parameter
Reason: An invalid parameter was found while reading the specified notification target file.
PC1130E Invalid notification target ID address
Reason: The specified EMail Server or SNMP Manager IP address is invalid and cannot be resolved. Either the IP address is not formatted properly or the DNS name cannot be resolved.
Action: Contact FDR/UPSTREAM Tech Support.
PC1131E Error opening notification target IP socket
Reason: An error occurred while attempting to open an IP socket for the specified EMail Server or SNMP Manager IP address.
Action: Contact FDR/UPSTREAM Tech Support.
PC1132E Error connecting to notification target socket
Reason: An error occurred while attempting to connect to the socket for the specified EMail Server IP address.
Action: Contact FDR/UPSTREAM Tech Support.
PC1133E Error sending a SNMP Trap packet
Reason: An error occurred while attempting to send a SNMP Trap packet.
Action: Contact FDR/UPSTREAM Tech Support.
PC1134E Internal FDR/UPSTREAM parameter error
Reason: An internal FDR/UPSTREAM parameter error occurred while performing the specified operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC1135E Can't allocate a SNMP Trap variable
Reason: While attempting to allocate memory for a SNMP Trap variable there was insufficient memory.
Action: Close applications or free memory.
PC1136E Invalid Trap Object ID
Reason: An internal FDR/UPSTREAM parameter error occurred. The specified SNMP Trap Object ID is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1137E Invalid variable title
Reason: An internal FDR/UPSTREAM parameter error occurred. The specified SNMP Trap variable title is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1138E Invalid variable value
Reason: An internal FDR/UPSTREAM parameter error occurred. The specified SNMP Trap variable value is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1139E Invalid variable type
Reason: An internal FDR/UPSTREAM parameter error occurred. The specified SNMP Trap variable type is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1140W SNMP Trap packet too large
Reason: An attempt was made to add too much information to a SNMP Trap packet. The SNMP Trap packet is full and will be sent without the additional information.
Action: Contact FDR/UPSTREAM Tech Support.
PC1141E Can't allocate a SNMP Trap packet
Reason: While attempting to allocate memory for a SNMP Trap packet there was insufficient memory.
Action: Close applications or free memory.
PC1142E Invalid variable title
Reason: An internal FDR/UPSTREAM parameter error occurred. The specified variable title was not found while. processing a notification message.
Action: Contact FDR/UPSTREAM Tech Support.
PC1143E Can't open notification targets file
Reason: An error occurred while attempting to open the specified notification targets file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1144E Can't read notification target header
Reason: An error occurred while attempting to read the header for a notification target from the specified notification targets file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1145E Can't allocate a notification target
Reason: While attempting to allocate memory for a notification target there was insufficient memory.
Action: Close applications or free memory.
PC1146E Can't read notification target detail
Reason: An error occurred while attempting to read the detail for a notification target from the specified notification targets file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1147E Invalid notification target type
Reason: A notification target was read from the specified notification targets file which has an invalid target type.
Action: Contact FDR/UPSTREAM Tech Support.
PC1148E Notification targets not loaded
Reason: An attempt was made to initialize a notification message without first loading one or more notification targets from a notification targets file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1149E Notification message was not initialized
Reason: An attempt was made to add information to a notification message before the notification message was initialized.
Action: Contact FDR/UPSTREAM Tech Support.
PC1150E Can't allocate a message part
Reason: While attempting to allocate memory for a message part there was insufficient memory.
Action: Close applications or free memory.
PC1151E Invalid attachment file name
Reason: The specified attachment file name is not fully qualified.
Action: Contact FDR/UPSTREAM Tech Support.
PC1152E Can't allocate an attachment
Reason: While attempting to allocate memory for an attachment there was insufficient memory.
Action: Close applications or free memory.
PC1153E Can't allocate a variable
Reason: While attempting to allocate memory for a variable there was insufficient memory.
Action: Close applications or free memory.
PC1154E Error in e-mail notification.
USVSS Errors
PC1175E (USVSS) Can't parse WRITER_METADATA from WinSS.xml
Reason: A WRITER_METADATA node cannot be found in the WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1176E (USVSS) Can't parse BACKUP_COMPONENTS from WinSS.xml
Reason: The BACKUP_COMPONENTS node cannot be found in the WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1177E (USVSS) Can't parse backup data from WinSS.xml
Reason: The backup information cannot be parsed from the WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1178E (USVSS) Can't find environment variable in WinSS.xml
Reason: An environment variable setting cannot be found in the WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1179W (USVSS) Required writer missing for a restore
Reason: The following writer name is required to be present when restoring the following component display name, and it is missing. The files for the component will most likely be restored successfully. But, without the participation of the writer, the component file will not be properly handled during the post-restore step. The component may not be usable after the restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC1180W (USVSS) Full-system backup excludes removable volume
Reason: A removable volume was excluded from a full-system backup because it was not explicitly included with its own file specification.
Action: Either eject this removable volume to cause this warning message to no longer be logged or add a file specification to explicitly back it up.
PC1181E (USVSS) The WinSS.xml file does not exist
Reason: The specified WinSS.xml file does not exist for an incremental backup or a restarted backup. This typically indicates that you are attempting to perform an incremental backup without first performing a full backup (either a First-Time Full or Full Merge).
Action: Perform a full backup before attempting an incremental backup.
PC1182E (USVSS) Invalid number of hard links
Reason: An internal error caused the number of hard links returned from a find file operation to be invalid. It does not match the number of file/directory names in the names multi-string.
Action: Contact FDR/UPSTREAM Tech Support.
PC1183E (USVSS) Invalid name space
Reason: An internal error caused the name space number returned from a find file operation to be invalid. It is higher than the maximum name space number.
Action: Contact FDR/UPSTREAM Tech Support.
PC1185E (USVSS) A required system state writer is missing
Reason: A check, to ensure that all of the required system state VSS writers are present, found that the following VSS writer is missing from the system. This is an operating system problem which needs to be addressed before a backup of the system state can continue.
Action: Examine any relevant Microsoft Knowledge Base articles to determine the cause and solution for this missing writer.
PC1186E (USVSS) Can't define boot partition drive character
Reason: An error occurred while attempting to define a drive character for the boot partition.
Action: Contact FDR/UPSTREAM Tech Support.
PC1187E (USVSS) Can't create a partition directory
Reason: An error occurred while attempting to create a partition directory for non-volume partition.
Action: Contact FDR/UPSTREAM Tech Support.
PC1188E (USVSS) Can't create a partition directory junction
Reason: An error occurred while attempting to create a directory junction for a mounted non-volume partition.
Action: Contact FDR/UPSTREAM Tech Support.
PC1189I (USVSS) Snapshot or snapshot set deleted
Reason: The following snapshot or snapshot set was deleted successfully.
PC1190E (USVSS) Can't find boot partition information
Reason: An error occurred while checking the symbolic device table for a boot partition ID or a boot partition device name.
Action: Contact FDR/UPSTREAM Tech Support.
PC1191E (USVSS) Can't copy a directory
Reason: An error occurred while attempting to copy the contents of one directory to another.
Action: Contact FDR/UPSTREAM Tech Support.
PC1192E (USVSS) Can't restore the boot partition
Reason: An error occurred while attempting to restore the contents of the boot partition.
Action: Contact FDR/UPSTREAM Tech Support.
PC1193E (USVSS) Can't find the boot partition ID
Reason: An error occurred while attempting to find the partition ID for a boot partition device name.
Action: Contact FDR/UPSTREAM Tech Support.
PC1194E (USVSS) Invalid file name(s) multi-string
Reason: An internal error caused a file name(s) multi-string returned from a find file operation to be invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1195E (USVSS) Can't copy the boot partition contents
Reason: An error occurred while attempting to copy the contents of the boot partition directory to the boot partition.
Action: Contact FDR/UPSTREAM Tech Support.
PC1196E (USVSS) Can't allocate the RestoreVolumes multi-string
Reason: While attempting to allocate memory for the RestoredVolumes multi-string, there was insufficient memory.
Action: Close applications or free memory.
PC1197E (USVSS) Can't create LastInstance UUID
Reason: An error occurred while attempting to create the LastInstance UUID.
Action: Contact FDR/UPSTREAM Tech Support.
PC1198E (USVSS) Can't convert LastInstance UUID
Reason: An error occurred while attempting to convert the LastInstance UUID.
Action: Contact FDR/UPSTREAM Tech Support.
PC1199E (USVSS) Can't create RestoredVolumes value
Reason: An error occurred while attempting to create the RestoredVolumes multi-string value for the HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ASR\RestoreSession registry key.
Action: Contact FDR/UPSTREAM Tech Support.
Initialization Errors
PC1200E Invalid function for CA version
Reason: This function is only available with the UPSTREAM version of the product from BMC.
PC1201E Error in configuration file
Action: See additional messages.
PC1202E Error in parameter file
Action: See additional messages.
PC1203E Required configuration parameter missing
Reason: A required configuration parameter that was expected is missing.
Action: See additional messages.
PC1204E Required parameter missing
Action: See additional messages.
PC1205E Bad ACTION value
Reason: UPSTREAM can only process in a Storage Server request only certain ACTION values. See the UPSTREAM Client User's Guide, Parameters section for a complete list of valid ACTION values.
Action: Respecify the ACTION value.
PC1206E Restart backup requested and nothing to restart
Reason: The restart only action command was specified and there was not an outstanding backup to restart.
PC1207E Run Job not supported in Windows
Reason: Since Microsoft Windows does not have the concept of a batch or command file, the job function has no meaning.
PC1208D Restart backup action command specified
PC1209E Kill last restart and there wasn't one pending
Return Code File Errors
PC1210E Error creating return code file
Reason: There was a file error creating the US.RET file.
Action: Look up the return code in the operating system messages section of the UPSTREAM manual.
PC1211E Error writing return code file
Reason: There was a file error writing the return code in the US.RET file.
Action: Look up the return code in the operating system messages section of the UPSTREAM manual.
PC1212E Error renaming backup file.
Reason: Renaming of a restartable backup file with the current process ID failed.
Action: Check if you have write permissions for the current working directory and upstream.*.bkp files.
PC1213E Error defining main thread
Action: Contact FDR/UPSTREAM Tech Support.
PC1214E Start time passed or conversation canceled
Reason: A STARTTIME parameter (YYMMDDHHMMSS) was specified that has already passed or the conversation for which it was specified was a CONV=WAIT conversation that was canceled.
Action: Specify a STARTTIME parameter that has not already passed.
PC1215D Running as specified user: %s
PC1216D Using environment variables specified in %s
PC1217I Env. var.: %s
PC1218W Error %s using environment variable
PC1219I (CJ) Closing UPSTREAM Change Journal File
Reason: Closing the following UPSTREAM Change Journal file:
PC1220E (CJ) Unknown Change Journal processing error
Reason: An error occurred while processing the Change Journal in the UPSTREAM Client which is running in a virtual server of a Windows cluster. The line following this message provides the details of the error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1221W Error opening translation table
Reason: There was an error opening the translation table listed below.
Action: See additional messages
PC1222W Error reading translation table
Reason: There was an error reading an entry from the translation table listed below.
Action: Verify that you have one line per entry. You must have a total of 256 lines. See additional messages.
PC1223W Error opening trans. table save file.
PC1224W Error reading from trans. table save file.
PC1225I Using translation table
Reason: The following translation table is now in use:
PC1226W Error writing to trans. table save file.
PC1227W Wrong recorded translation table
PC1228D Translation table mismatch.
PC1229W Mismatch between RESTARTVERSIONDATE and PROFILE.
PC1230W Restart restore requested and nothing to restart
Reason: The restart only action command was specified and there was not an outstanding restore to restart.
PC1231D Restart restore action command specified
PC1232E Kill restart restore and there wasn't one pending
PC1233W Restartable backup has been killed
PC1234W Restartable restore has been killed
PC1235D Running pre-process job:
PC1236D Running post-process job:
PC1237E Pre-process job failed
PC1238E Post-process job failed
PC1240E Error allocating version date structure
Reason: The following version date will not be added to the return code file. In most cases this is not a problem.
Action: Free memory.
PC1241E Error writing version date to return code file
Reason: The following version date will not be added to the return code file. In most cases this is not a problem.
Action: See additional messages.
PC1242D Running failed process job:
PC1243E Post-process job failed
PC1244E (UNIX) Error installing signal
Reason: The following signal could not be installed
Action: See additional messages.
PC1245E (UNIX) Error opening PID file
Reason: There was a file system error opening the file that UPSTREAM will use to store the process ID.
Action: See additional messages.
PC1246E (UNIX) Error writing PID file
Reason: There was a file system error writing the file that UPSTREAM will use to store the process ID.
Action: See additional messages.
PC1247W (AIX) Error #%d getting file size limit
Action: Contact FDR/UPSTREAM Tech Support.
PC1248W (AIX) File size limit set (%s)
Reason: We recommend an unlimited file size limit
Action: Adjust your system file size limit in smit or use the "ulimit -f unlimited" command.
PC1249E (USInit) Can't start Change Journal processing
Reason: An error occurred while attempting to start the Change Journal processing in the UPSTREAM Client which is running in a virtual server of a Windows cluster. The line following this message provides the details of the error.
Action: Contact FDR/UPSTREAM Tech Support.
Process Errors
PC1250E Error creating internal message list
Reason: There was an error creating the internal message list. This may cause the flow of screens to operate incorrectly.
Action: Free memory and try again.
PC1251E Stack overflow
Reason: There is a shortage of stack space for temporary memory. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1252I Windows message queue depth changed
Reason: The environment variable was specified to change the UPSTREAM message queue depth. The value specified may be reduced due to Windows memory considerations
PC1253E (Windows) Program Exception (%s at 0x%p)
Reason: UPSTREAM experienced a program exception of some type.
Action: Send the UPSTREAM.LOG file to FDR/UPSTREAM Tech Support.
UPSTREAM Enter/Exit Errors
PC1259D Deleting Restarted %s. Version: %s
PC1260E (zLinux) UPSTREAM error obtaining VM name:
PC1261E UPSTREAM forceful termination error
Reason: US.exe attempted to terminate itself forcefully but failed to do so because of the following error. A less drastic termination method will now be attempted
PC1262E UPSTREAM terminating forcefully now
Reason: US.exe will forcefully terminate itself now.
PC1263E Error #%u getting operating system information
Action: Contact FDR/UPSTREAM Tech Support.
PC1264I UPSTREAM orphaned due to USTPServ termination
Reason: US.exe was started by USTPServ.exe or by USAttMgr.exe which was started by USTPServ.exe and USTPServ.exe was terminated without first sending a KILL request to US.exe via USCntl.exe. US.exe will continue to run as an orphaned process running in the context of a service.
PC1265E UPSTREAM attempting forceful termination
Reason: US.exe attempted to terminate itself gracefully but failed to do so within a reasonable amount of time. US.exe will now attempt to terminate itself forcefully.
PC1266W UPSTREAM terminating due to starting process termination
Reason: US.exe was started by another process (either a parent US.exe or by USTPServ.exe) and the starting process was terminated without first sending a KILL request to US.exe via USCntl.exe. US.exe will now terminate itself so as not to be left as an orphaned process running in the context of a service.
PC1267W UPSTREAM received a KILL request
Reason: US.exe received a KILL request and is starting its abnormal termination processing.
PC1268E (UNIX) Signal caught: %s
Reason: The signal above was caught by UPSTREAM. This is a fatal error and UPSTREAM will be terminated.
Action: Contact FDR/UPSTREAM Tech Support.
PC1269E Error cleaning up a work directory
Reason: An error occurred during multi-user initialization which prevents US.exe from cleaning up a previously created work directory. The work directory and the operating system error code follow.
Action: Contact FDR/UPSTREAM Tech Support.
PC1270E Error creating a new work directory
Reason: An error occurred during multi-user initialization which prevents US.exe from creating a new work work directory. The work directory and the operating system error code follow.
Action: Contact FDR/UPSTREAM Tech Support.
PC1271D User termination
Reason: User requested termination of UPSTREAM.
PC1272E External kill
Reason: UPSTREAM will now terminate due to an external termination request.
PC1273I Switching log files
Reason: The log file name is being switched to the log file name that follows. All further messages will be written to the new log file.
PC1274E Multiple User mode has been disabled
Reason: Multiple user mode requires a user name and a computer name and this information could not be obtained from the operating system. Multiple user mode is therefore disabled.
PC1275I Entering UPSTREAM v%s%s [%s] %s
PC1276I Exiting UPSTREAM
PC1277E Error setting termination timer
Reason: UPSTREAM can't set the termination timer. It will terminate anyway but may be unstable in Windows.
PC1278E Error resetting termination timer
Reason: UPSTREAM can't reset the termination timer. It will terminate anyway but may be unstable in Windows.
PC1279E Termination process took too long
Reason: UPSTREAM waited 60 seconds for pending remote allocate requests to terminate. UPSTREAM will terminate anyway but may be unstable in Windows.
USModify Errors
PC1280I Entering USModify
PC1281I Exiting USModify
PC1282E USModify parameter error
Reason: Multiple file spec parameters were specified.
PC1283E USModify parameter error
Reason: Multiple override file parameters were specified.
PC1284N Please enter a value for the following parameter(s)
Reason: Press the Esc key to enter a blank value.
PC1285E USModify parameter error
Reason: No configuration or parameter file specifications were specified.
PC1286W USModify found no files
Reason: No files matching the following file specification were found.
PC1287E USModify error modifying configuration file
Action: See additional messages.
PC1288E USModify error modifying parameter file
Action: See additional messages.
PC1289I USModify successfully modified file
Reason: The following file was successfully modified.
Session Management Errors
PC1301E Unknown session state
Reason: Unexpected session state. Internal failure.
Action: Contact FDR/UPSTREAM Tech Support.
PC1302E Session state did not change
Reason: The session state must always change. Internal failure.
Action: Contact FDR/UPSTREAM Tech Support.
PC1303E Error displaying session status
Reason: There was an error in obtaining session status information from APPC.
Action: See additional messages and lookup return codes.
PC1304D Activate DLC failure
Reason: If you are using AdaptSNA, this indicates that the link timer has timed out. The link will be continually retried until you press CANCEL or the link becomes active.
SNA Exit Errors
PC1310I LU Log Exit
Reason: The following type and subtype describe some error reported by APPC/PC concerning the LU.
Action: Can usually be ignored. See UPSTREAM manual for the meaning of the type and subtype.
PC1311D PU Log Exit
Reason: The following type and subtype describe some error reported by APPC/PC concerning the PU.
Action: A TYPE of 17 with a SUBTYPE of 0 is normal Other TYPEs and SUBTYPEs should be looked up in the Log Exits codes in the UPSTREAM User's Guide.
Session State Errors
PC1325E Error occurred at the session start point
PC1326E Error occurred during ATTACH_PU verb
PC1327E Error occurred during ATTACH_LU verb
PC1328E Error occurred during ACTIVATE_DLC verb
PC1329E Error occurred during "dial remote" prompt
PC1330E Error occurred during session activation
PC1331E Error occurred while waiting for session start
PC1332E Error occurred at session active location
PC1333E Error occurred during session deactivation
PC1334E Error occurred during DETACH_LU verb
PC1335E Error occurred during DETACH_PU verb
PC1336E Error occurred after session was stopped
W2KFiles Errors
PC1340E Insufficient memory for a W2KFiles entry
Reason: While attempting to allocate memory for a W2KFiles entry, there was insufficient memory.
Action: Close applications or free memory.
PC1341E Can't determine the TLS installation status
Reason: An error occurred while attempting to determine if the Terminal Services Licensing Server is installed or not.
Action: Contact FDR/UPSTREAM Tech Support.
PC1342E Can't backup the TLS database
Reason: An error occurred while attempting to backup the Terminal Services Licensing Server database.
Action: See additional messages.
PC1343E Can't restore the TLS database
Reason: An error occurred while attempting to restore the Terminal Services Licensing Server database.
Action: See additional messages.
PC1344E Can't determine the IIS installation status
Reason: An error occurred while attempting to determine if the Internet Information Service is installed or not.
Action: Contact FDR/UPSTREAM Tech Support.
PC1345E Can't backup the IIS metabase
Reason: An error occurred while attempting to backup the Internet Information Service metabase.
Action: See additional messages.
PC1346E Can't restore the IIS metabase
Reason: An error occurred while attempting to restore the Internet Information Service metabase.
Action: See additional messages.
PC1347E Can't determine the WMI installation status
Reason: An error occurred while attempting to determine if the Windows Management Instrumentation is installed or not.
Action: Contact FDR/UPSTREAM Tech Support.
PC1348E Can't backup the WMI repository
Reason: An error occurred while attempting to backup the Windows Management Instrumentation repository.
Action: See additional messages.
PC1349E Can't restore the WMI repository
Reason: An error occurred while attempting to restore the Windows Management Instrumentation repository.
Action: See additional messages.
PC1350E Can't determine the RSM installation status
Reason: An error occurred while attempting to determine if the Removable Storage Manager is installed or not.
Action: Contact FDR/UPSTREAM Tech Support.
PC1351E Can't backup the RSM database
Reason: An error occurred while attempting to backup the Removable Storage Manager database.
Action: See additional messages.
PC1352E Can't restore the RSM database
Reason: An error occurred while attempting to restore the Removable Storage Manager database.
Action: See additional messages.
USVSS Errors
PC1375E (USVSS) Can't allocate merged hard link info
Reason: While attempting to allocate memory for a merged hard link info array, there was insufficient memory.
Action: Close applications or free memory.
PC1376E (USVSS) Can't merge hard link info
Reason: While attempting to merge the hard link information from the previous backup with the current hard link information, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1377E (USVSS) Can't get number of hard links
Reason: While attempting to read the number of hard links from the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1378E (USVSS) Can't allocate backup hard link info
Reason: While attempting to allocate memory for a backup hard link info array, there was insufficient memory.
Action: Close applications or free memory.
PC1379E (USVSS) Can't create a USStringCache entry
Reason: While attempting to allocate memory for a USStringCache entry, there was insufficient memory.
Action: Close applications or free memory.
PC1380E (USVSS) Can't create a USStringEntry entry
Reason: While attempting to allocate memory for a USStringEntry entry, there was insufficient memory.
Action: Close applications or free memory.
PC1381E (USVSS) Can't get additional file specs
Reason: While attempting to get a set of additional file specs for the following VSS writer and component, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1382E (USVSS) Can't get hard link file name
Reason: While attempting to read a hard link file name from the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1383E (USVSS) Can't allocate MFTFileNames entry
Reason: While attempting to allocate memory for a MFTFileNames entry, there was insufficient memory.
Action: Close applications or free memory.
PC1384E (USVSS) Volume MFT size is greate than supported max
Reason: While scanning the MFT for the specified volume, it was found that this MFT contains more records than is currently supported.
Action: Contact FDR/UPSTREAM Tech Support.
PC1385E (USVSS) Can't set last complete backup time stamp
Reason: While attempting to add the last complete backup time stamp to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1386E (USVSS) Can't set number of hard links
Reason: While attempting to add the number of hard links to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1387E (USVSS) Can't prepare cluster shared volume
Reason: While attempting to prepare a cluster shared volume of a cluster for backup an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1388E (USVSS) Can't clear cluster shared volume
Reason: While attempting to clear the backup state of a cluster shared volume of a cluster an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1389W (USVSS) Can't enable AutoMount
Reason: While attempting to enable the AutoMount feature of the Mount Manager, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1390W (USVSS) Can't reset AutoMount
Reason: While attempting to reset the AutoMount feature of the Mount Manager to its previous state, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1391E (USVSS) Can't build hard link info
Reason: While attempting to add the hard link info for a volume to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1392E (USVSS) Can't set hard link info
Reason: While attempting to add the hard link info for a volume to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1393E (USVSS) Can't set last complete backup time stamp
Reason: While attempting to add the last complete backup time stamp to the WinSS.xml file, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1394E (USVSS) Can't open the WinSS.xml file
Reason: While attempting to open the WinSS.xml file to modify the LastCompleteBackupTimeStamp attribute, an error occurred
Action: Contact FDR/UPSTREAM Tech Support.
PC1395E (USVSS) Can't get the WinSS.xml file size
Reason: While attempting to get the size of the WinSS.xml file to modify the LastCompleteBackupTimeStamp attribute, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1396E (USVSS) Can't read the WinSS.xml file
Reason: While attempting to read the WinSS.xml file to modify the LastCompleteBackupTimeStamp attribute, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1397E (USVSS) Can't find the LastCompleteBackupTimeStamp attribute
Reason: While attempting to find the LastCompleteBackupTimeStamp attribute in the WinSS.xml file, the attribute was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC1398E (USVSS) Can't set the WinSS.xml file pointer
Reason: While attempting to set the file pointer for the WinSS.xml file to modify the LastCompleteBackupTimeStamp attribute, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC1399E (USVSS) Can't write the WinSS.xml file
Reason: While attempting to write the WinSS.xml file to modify the LastCompleteBackupTimeStamp attribute, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
General APPC Errors
PC1401E Unknown APPC function
Reason: A request was made for an APPC function that was unknown. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1402E Remote system error
Reason: The preceding message was from the remote system. Subsequent messages describe where in the PC the error occurred and can usually be ignored.
Action: See the Storage Server log (available through Host Reporting) for more details.
PC1403I Allocation failure - retry
Reason: There was a retryable allocation error. UPSTREAM will retry this verb up to 10 times before reporting this as a fatal error.
PC1404E Illegal force to send
Reason: The remote requested a force to send state illegally. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1405E An APPC Startup error occurred
Reason: An attempt to initialize an APPC interface failed. The name of the APPC interface and the error code follow.
Action: Ensure that your APPC software is properly configured.
PC1406D Prior messages(s) are from the remote system.
File System Errors
PC1425I (NT) USW2KAgt trace enabled
Reason: Tracing is currently enabled for the FDR/UPSTREAM Windows Agent service. This may have a severe impact on performance.
Action: USW2KAgt tracing can be controlled by clicking the Windows Agent Configuration button on the Miscellaneous tab of the FDR/UPSTREAM Client Advanced Configuration dialog.
PC1426E Error setting file size
PC1427E Error opening file in setting file size
PC1428E Error in setting file size setting file pointer
PC1429I (DRCache) DR files cached successfully
Reason: The set of disaster recovery files for the backup have been successfully cached on the DR cache server.
PC1430W (DRCache) Can't open a DR file to be cached
Reason: An error occurred while attempting to open a file to be cached to the DR Cache files server at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1431W (DRCache) Can't get the size of a DR file to be cached
Reason: An error occurred while attempting to get the size of a file to be cached to the DR Cache files server at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1432W (DRCache) Can't allocate buffer for a DR file to be cached
Reason: An error occurred while attempting to allocate a buffer to read a file to be cached to the DR Cache files server at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1433W (DRCache) Can't read a DR file to be cached
Reason: An error occurred while attempting to read a file to be cached to the DR Cache files server at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1434W (DRCache) Can't send a DR file to be cached
Reason: An error occurred while attempting to write to a named pipe in order to cache the DR files at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1435W (DRCache) Can't read a cache DR file reply
Reason: An error occurred while attempting to read from a named pipe in order to cache the DR files at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1436W (DRCache) Can't open USW2KAgt named pipe
Reason: An error occurred while attempting to open a named pipe to USW2KAgt in order to cache the DR files at the end of a successful backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1437E (NT) Can't create the USASR.cfg file
Reason: An error occurred while attempting to create the USASR.cfg or USRecovery.cfg file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1438D (Unix) FindNext missing handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1439I (NT) %s pointer not open
Reason: Internal error, but the file data will be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC1440E (NT) Can't flush file buffers
Reason: An error occurred while attempting to flush the file buffers for a file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1441E (NT) Can't zero unallocated range
Reason: An error occurred while attempting to initialize an unallocate range within a sparse file to all zeroes.
Action: Contact FDR/UPSTREAM Tech Support.
PC1442E (NT) Invalid USW2KAgt server address mode
Reason: Either the Client is 32-bit and the Agent is 64-bit or the Agent is 32-bit and the Client is 64-bit. This is not supported for the specified action.
Action: You can set environment variable USNOADDRESSMODECHECK to cause the Client to skip this address mode check. This is done by adding "USNOADDRESSMODECHECK=Y" to the USEnv.dat file and restarting the Client.
PC1443E (NT) Can't get OS Version
Reason: An error occurred while attempting to determine the operating system version.
Action: Contact FDR/UPSTREAM Tech Support.
PC1444E (NT) Remote backups not supported from XP Home
Reason: A backup of a remote machine is not supported from a Windows XP Home machine.
Action: Do not attempt a remote backup from a Windows XP Home machine.
PC1445I (NT) ASR directory not created for Windows XP non-Professional Edition
Reason: This machine is running Windows XP, but not Windows XP Professional Edition. The ASR directory will not be created for this machine.
Action: Upgrade to Windows XP Professional if you want to create an ASR directory for this machine in preparation for ASR disaster recovery restore.
PC1446E Error closing file
Action: See additional messages.
PC1447E Error locking file
PC1448E (NT) Can't open the ASR.sif file
Reason: An error occurred while attempting to open the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1449E (NT) Can't get the size of the ASR.sif file
Reason: An error occurred while attempting to get the size of the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1450E (NT) Can't allocate an ASR.sif file buffer
Reason: An error occurred while attempting to allocate a buffer for the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1451E (NT) Can't read the ASR.sif file
Reason: An error occurred while attempting to read the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1452E (NT) Can't recreate the ASR.sif file
Reason: An error occurred while attempting to recreate the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1453E (NT) Can't write the ASR.sif file
Reason: An error occurred while attempting to write the ASR.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1454E (NT) Can't open the ASRPNP.sif file
Reason: An error occurred while attempting to open the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1455E (NT) Can't get the size of the ASRPNP.sif file
Reason: An error occurred while attempting to get the size of the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1456E (NT) Can't allocate an ASRPNP.sif file buffer
Reason: An error occurred while attempting to allocate a buffer for the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1457E (NT) Can't read the ASRPNP.sif file
Reason: An error occurred while attempting to read the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1458E (NT) Can't recreate the ASRPNP.sif file
Reason: An error occurred while attempting to recreate the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1459E (NT) Can't write the ASRPNP.sif file
Reason: An error occurred while attempting to write the ASRPNP.sif file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1460E (NT) Can't get system root
Reason: An error occurred while attempting to get the system root for the following computer name.
Action: Contact FDR/UPSTREAM Tech Support.
PC1461E (NT) Can't create the USASR.dat file
Reason: An error occurred while attempting to create the USASR.dat or USRecovery.dat file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1462E (NT) Can't get changed files list
Reason: An error occurred while attempting to get the list of changed files.
Action: Contact FDR/UPSTREAM Tech Support.
PC1463E (NT) Can't add changed file to tree
Reason: An error occurred while attempting to add the name of a changed file to the changed files tree.
Action: Contact FDR/UPSTREAM Tech Support.
PC1464E (NT) USW2KAgt pipe compression type is invalid
Reason: An error occurred while validating the compression type of a packing record. This may happen if the version of the FDR/UPSTREAM Windows Agent is greater than the version of the FDR/UPSTREAM Client (US.exe or USCmd.exe).
Action: Validate that the version of the FDR/UPSTREAM Windows Agent is not greater than the version of the FDR/UPSTREAM Client. Contact FDR/UPSTREAM Tech Support.
PC1465E (NT) USW2KAgt pipe data is invalid
Reason: An error occurred while reading a record from a USW2KAgt pipe packing record.
Action: Contact FDR/UPSTREAM Tech Support.
PC1466E (NT) Can't read the ProductId value
Reason: An error occurred while attempting to read the ProductId value in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1467E Directory search invalid spec: %s
Action: Respecify.
PC1468E (NT) All USW2KAgt pipes are busy
Reason: While attempting to open a USW2KAgt pipe, UPSTREAM found that all of the available USW2KAgt pipe instances are busy.
Action: Contact FDR/UPSTREAM Tech Support or reduce the number of concurrent backups you are running against the target computer.
PC1469I (NT) Setting read-only attribute for %s
Reason: This message simply notifies you of read-only files on your system.
PC1470E (NT) Access denied for USW2KAgt pipe
Reason: An access denied error occurred while attempting to communicate with the FDR/UPSTREAM Windows Agent service's named pipe. This is probably caused by running FDR/UPSTREAM (US.exe) under a user account that is not a member of the Administrators group. A number of other errors may also be reported depending on what you are attempting to backup or restore. The backup or restore may or may not be successful.
Action: Ensure that FDR/UPSTREAM is run under an account that is a member of the Administrators group either directly or indirectly.
PC1471E (NT) Can't open USW2KAgt pipe to get a volume name
Reason: An error occurred while attempting to open the USW2KAgt named pipe to get the volume name for a drive.
Action: Contact FDR/UPSTREAM Tech Support.
PC1472E (NT) Can't open a key to be merged
Reason: An error occurred while attempting to open a registry key for the purposes of finding its subkeys for a merge operation.
Action: See additional messages.
PC1473E (NT) Can't enumerate a key to be merged
Reason: An error occurred while attempting to enumerate the subkeys of a registry key in order to perform a merge operation.
Action: See additional messages.
PC1474E (NT) Can't open an active subkey to be merged
Reason: An error occurred while attempting to open a registry key to merge this key's start value with that of its counterpart in the registry to be restored.
Action: See additional messages.
PC1475E (NT) Can't query the Start value of an active key
Reason: An error occurred while attempting to read the Start value of a registry key to merge this value with the counterpart key from the registry to be restored.
Action: See additional messages.
PC1476E (NT) Can't open a restore subkey to be merged
Reason: An error occurred while attempting to open a registry key in the registry to be restored to merge this key's Start value with that of its counter part in the active registry.
Action: See additional messages.
PC1477E (NT) Can't query the Start value of a restore key
Reason: An error occurred while attempting to read the Start value of a registry key in the registry to be restored to merge this value with the counterpart key from the active registry.
Action: See additional messages.
PC1478E (NT) Can't query the Start value of a restore key
Reason: An error occurred while attempting to write the Start value of a registry key in the registry to be restored during a merge operation.
Action: See additional messages.
PC1479E (NT) Can't open the AsrKeysNotToRestore key
Reason: An error occurred while attempting to open the AsrKeysNotToRestore key in the active registry.
Action: See additional messages.
PC1480E (NT) Can't read a KeyNotToRestore value
Reason: An error occurred while attempting to read a value from the KeysNotToRestore key in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1481E (NT) Can't read the CurrentVersion value
Reason: An error occurred while attempting to read the CurrentVersion value in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1482W (NT) Can't create ASR files
Reason: An error occurred while attempting to create a set of ASR files for the following machine. If this is a snapshot backup using the WinSS PlugIn the backup will continue.
Action: This error may be caused by the known issue of Windows Vista reporting a wrong version number to the FDR/UPSTREAM Client. Contact FDR/UPSTREAM Tech Support.
PC1483E (NT) Can't open HKEY_LOCAL_MACHINE key
Reason: An error occurred while attempting to open the HKEY_LOCAL_MACHINE key in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1484E (NT) Can't open CurrentVersion key
Reason: An error occurred while attempting to open the SOFTWARE\Microsoft\Windows NT\CurrentVersion key in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1485E (NT) Can't read the SystemRoot value
Reason: An error occurred while attempting to read the SystemRoot value in the registry of the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1486E (NT) Can't copy the ASR.sif file
Reason: An error occurred while attempting to copy the ASR.sif file from the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1487E (NT) Can't copy the ASRPNP.sif file
Reason: An error occurred while attempting to copy the ASRPNP.sif file from the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1488E (NT) Can't copy the Setup.log file
Reason: An error occurred while attempting to copy the Setup.log file from the following machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1489E (NT) Can't copy the USASR.key file
Reason: An error occurred while attempting to copy the USASR.key file from the following machine.
Action: Examine the Application Event Log for any USW2KAgt error messages. Contact FDR/UPSTREAM Tech Support.
PC1490D (NT) Error %d in SfcIsFileProtected test of %s
PC1491D (NT) Error %d loading SfcIsFileProtected function for system protected file check
PC1492D (NT) Error %d loading SFC.DLL library for system protected file check
PC1493I (NT) System protected file (%s)
PC1494E (NT) Can't open USW2KAgt pipe for SPF List
Reason: An error occurred while attempting to open the USW2KAgt named pipe to get the list of system protected files.
Action: Contact FDR/UPSTREAM Tech Support.
PC1495E (NT) Can't open USW2KAgt pipe for Rep Dirs
Reason: An error occurred while attempting to open the USW2KAgt named pipe to get the list of replicated directories.
Action: Contact FDR/UPSTREAM Tech Support.
PC1496E (NT) Can't open USW2KAgt pipe to restore rep dir
Reason: An error occurred while attempting to open the USW2KAgt named pipe to restore a replicated directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1497E (NT) Can't open USW2KAgt pipe to backup COM DB
Reason: An error occurred while attempting to open the USW2KAgt named pipe to backup the COM+ registration database.
Action: Contact FDR/UPSTREAM Tech Support.
PC1498E (NT) Can't open USW2KAgt pipe to restore COM DB
Reason: An error occurred while attempting to open the USW2KAgt named pipe to restore the COM+ registration database.
Action: Contact FDR/UPSTREAM Tech Support.
PC1499E (NT) Insufficient memory for operation entry
Reason: While attempting to allocate memory for a operation entry there was insufficient memory.
Action: Close applications or free memory.
PC1500E (NT) Insufficient memory for registry file entry
Reason: While attempting to allocate memory for a registry file entry there was insufficient memory.
Action: Close applications or free memory.
PC1501E (NT) Can't create the ASR directory
Reason: An error occurred while attempting to create the ASR subdirectory of the work path.
Action: See additional messages.
PC1502E (NT) Can't create the ASR machine directory
Reason: An error occurred while attempting to create the ASR\machinename subdirectory of the work path for the following machine name.
Action: See additional messages.
PC1503E (NT) Can't write to the scheduled operation file
Reason: An error occurred while attempting to write a scheduled operation to the scheduled operation file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1504E (NT) Can't create the scheduled operation file
Reason: An error occurred while attempting to create a new scheduled operations file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1505E (NT) Can't open the scheduled operation file
Reason: An error occurred while attempting to open a scheduled operation file to read from it.
Action: Contact FDR/UPSTREAM Tech Support.
PC1506E (NT) Can't read the scheduled operation file
Reason: An error occurred while attempting to read a scheduled operation from the scheduled operation file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1507E (NT) Can't find registry for operation
Reason: An error occurred while attempting to find the registry entry for a scheduled operation read from the scheduled operations file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1508E (NT) Can't append to the scheduled operation file
Reason: An error occurred while attempting to open a scheduled operation file to append to it.
Action: Contact FDR/UPSTREAM Tech Support.
PC1509E (NT) Can't start the replicated directories restore
Reason: An error occurred while attempting to start a restore of the replicated directories on the following computer.
Action: Contact FDR/UPSTREAM Tech Support.
PC1510E (NT) Can't restore COM+ registry database
Reason: An error occurred while restoring the COM+ registry database.
Action: See additional messages.
PC1511E (NT) Can't backup COM+ registry database
Reason: An error occurred while backing up the COM+ registry database.
Action: See additional messages.
PC1512E (NT) Insufficient memory for replicated directory
Reason: While attempting to allocate memory for a replicated directory, there was insufficient memory.
Action: Close applications or free memory.
PC1513E (NT) Invalid USW2KAgt pipe record received
Reason: An invalid record was received from the FDR/UPSTREAM Windows Agent service on the following server.
Action: Contact FDR/UPSTREAM Tech Support.
PC1514E (NT) Can't write to USW2KAgt pipe
Reason: An error occurred while attempting to write data to the USW2KAgt named pipe.
Action: Contact FDR/UPSTREAM Tech Support.
PC1515E (NT) A USW2KAgt pipe buffer is too small
Reason: While attempting to read data from the USW2KAgt named pipe, the buffer was found to be too small.
Action: Contact FDR/UPSTREAM Tech Support.
PC1516E (NT) Can't read from USW2KAgt pipe
Reason: An error occurred while attempting to read data from the USW2KAgt named pipe.
Action: Contact FDR/UPSTREAM Tech Support.
PC1517E (NT) Invalid USW2KAgt server challenge record
Reason: During the verification process between US.exe and the USW2KAgt service on a remote machine, the server challenge record received from USW2KAgt was found to be invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1518E (NT) Invalid USW2KAgt server challenge ID
Reason: During the verification process between US.exe and the USW2KAgt service on a remote machine, the server challenge record received from USW2KAgt was found to contain an invalid identification.
Action: Contact FDR/UPSTREAM Tech Support.
PC1519E (NT) Invalid USW2KAgt acknowledgement record
Reason: During the verification process between US.exe and the USW2KAgt service on a remote machine, the acknowledgement record received from USW2KAgt was found to be invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC1520I (Unix) The directory above was not found
Reason: If this is a restore, UPSTREAM will create the directory with it's default owner/group. You may need to manually modify these settings.
PC1521E (NT) Can't validate USW2KAgt server
Reason: The USW2KAgt service could not be properly validated.
Action: Contact FDR/UPSTREAM Tech Support.
PC1522E Error renaming a file.
Reason: The file name logged with this message is the source file.
Action: See additional messages.
PC1523W (NT) Can't get exclude file specs for share
Reason: An error occurred while attempting to get the exclude file specs for a share name.
Action: Contact FDR/UPSTREAM Tech Support.
PC1524W (NT) The local system is not Windows 2000
Reason: You are attempting to backup from or restore to a target system which is Windows 2000, but the local system is not Windows 2000. FDR/UPSTREAM running on a non-Windows 2000 system may encounter problems dealing with a Windows 2000 system.
Action: Backup and restore your Windows 2000 system only from another Windows 2000 system.
PC1525W (NT) The USW2KAgt service is unavailable
Reason: The FDR/UPSTREAM Windows Agent service on the following system is either not working correctly or is a back-level version and cannot be (re)installed either because of some error or by parameter specification.
Action: Make sure the INSTALLWIN2KAGENT parameter is set properly.
PC1526W (NT) Can't get max system protected file name size
Reason: An error occurred while attempting to get the maximum size of a system protected file name from the following system.
Action: Contact FDR/UPSTREAM Tech Support.
PC1527W (NT) Can't get number of system protected files
Reason: An error occurred while attempting to get the number of system protected files from the following system.
Action: Contact FDR/UPSTREAM Tech Support.
PC1528W (NT) Insufficient memory for SP file array
Reason: While attempting to allocate memory for an array of system protected file names, there was insufficient memory.
Action: Close applications or free memory.
PC1529W (NT) Can't get system protected file names
Reason: An error occurred while attempting to get the system protected file names from the following system.
Action: Contact FDR/UPSTREAM Tech Support.
PC1530W (NT) A registry value will not be preserved
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered a value which exists in the active registry, but cannot be created in the restore registry because the value's key also does not exist in the restore registry. The name of the value follows.
Action: Contact FDR/UPSTREAM Tech Support.
PC1531E (NT) Can't create a not-to-restore restore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error creating a key in the restore registry.
Action: See additional messages.
PC1532E (NT) Can't delete not-to-restore restore key value
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error deleting a value in the restore registry which does not exist in the active registry.
Action: See additional messages.
PC1533E (NT) Can't delete a not-to-restore restore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error deleting a key in the restore registry which does not exist in the active registry.
Action: See additional messages.
PC1534E (NT) Can't grant full control of registry key
Reason: An error occurred while attempting to grant the current Windows user account full control over a registry key in the SYSTEM hive file to be restored.
Action: See additional messages.
PC1535E (NT) Can't preserve active registry keys
Reason: An error occurred while attempting to copy the not-to-be-restored registry keys from the active SYSTEM registry hive to the backup copy of the SYSTEM registry hive. As a result the keys that are not to be restored will be restored anyway.
Action: See additional messages.
PC1536E (NT) Can't open the KeysNotToRestore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error opening the KeysNotToRestore key in the active registry. This key contains values that list the registry keys and values that are not to be restored.
Action: See additional messages.
PC1537E (NT) Can't enum the KeysNotToRestore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error enumerating the list of registry keys and values that are not to be restored.
Action: See additional messages.
PC1538E (NT) Can't open a not-to-restore active key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error opening a key in the active registry.
Action: See additional messages.
PC1539E (NT) Can't get a not-to-restore active value length
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error getting the length of the data for a value in the active registry.
Action: See additional messages.
PC1540E (NT) Can't allocate storage for active value data
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error allocating storage for the data for a value in the active registry.
Action: See additional messages.
PC1541E (NT) Can't read a not-to-restore active value
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error reading the data for a value in the active registry.
Action: See additional messages.
PC1542E (NT) Can't save a not-to-restore active key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error saving a key in the active registry.
Action: See additional messages.
PC1543E (NT) Can't open a not-to-restore restore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error opening a key in the restore registry.
Action: See additional messages.
PC1544E (NT) Can't write a not-to-restore restore value
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error writing the data for a value in the restore registry.
Action: See additional messages.
PC1545E (NT) Can't restore a not-to-restore restore key
Reason: In order for UPSTREAM to correctly restore the registry SYSTEM hive, it must determine which keys and values should not be included in the restore and then copy these keys and values from the currently active registry SYSTEM hive to the registry SYSTEM hive that is being restored before the restore is committed. UPSTREAM encountered an error restoring a key in the restore registry.
Action: See additional messages.
PC1546E File too large
Reason: UPSTREAM attempted to perform direct file I/O on a file which is larger than 2GB in an environment which does not support this.
Action: Contact FDR/UPSTREAM Tech Support.
PC1547I A previously unencrypted file is now encrypted
Reason: A file that was on the backup in an unencrypted state is now encrypted on the disk after a restore. This is most likely the result of the unencrypted file being restored into a directory that is encrypted. Since this happened during an UPSTREAM restore, the file was encrypted by the user account under which UPSTREAM was running at the time. The name of the file and the user account under which UPSTREAM was running follow.
Action: Attempt to decrypt the file if required using the same user account that UPSTREAM was running under. If you need further help, call FDR/UPSTREAM Tech Support.
PC1548E Special handling required for encrypted file/dir
Reason: An encrypted file or directory was encountered that requires special handling.
Action: Contact FDR/UPSTREAM Tech Support.
PC1549E File is too large for file system
Reason: A sparse file on the backup has a size that is larger than what can be supported by the file system.
Action: See additional messages.
PC1550E Can't allocate a sparse zero block
Reason: There was an error allocating memory for a sparse zero data buffer.
Action: Free memory and try again.
PC1551E Can't write sparse data past last range
Reason: There was an attempt to write data past the end of the last allocated range of a sparse file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1552E Can't start the FDR/UPSTREAM Windows Agent service
Reason: The USW2KAgt service cannot be started.
Action: Contact FDR/UPSTREAM Tech Support.
PC1553W (NT) Compressed files not supported
Reason: A compressed file on the backup cannot be compressed during the restore because the file system does not support compressed files. The file was restored but not compressed.
PC1554W (NT) Sparse files not supported
Reason: A sparse file on the backup cannot be made sparse during the restore because either the operating system or the file system does not support sparse files. The file was restored but it is not sparse.
PC1555E (NT) Can't get file size
Reason: An error occurred while attempting to get the size of a sparse file.
Action: See additional messages.
PC1556E (NT) Can't get single range
Reason: An error occurred while attempting to get a single allocated range for a sparse file.
Action: See additional messages.
PC1557E (NT) Can't allocate range buffer
Reason: There was an error allocating memory for an allocated range buffer for a sparse file.
Action: Free memory and try again.
PC1558E (NT) Can't get all ranges
Reason: An error occurred while attempting to get all of the allocated ranges for a sparse file.
Action: See additional messages.
PC1559E (NT) Can't set sparse
Reason: An error occurred while attempting to make a file sparse.
Action: See additional messages.
PC1560E (NT) Can't zero data
Reason: An error occurred while attempting to initialize a sparse file to all zeroes.
Action: See additional messages.
PC1561E (NT) Can't allocate sparse information
Reason: There was an error allocating memory for the sparse information for a file.
Action: Free memory and try again.
PC1562E (NT) Can't set compression
Reason: An error occurred while attempting to set the compression format for a file.
Action: See additional messages.
PC1563E (NT) Can't get compression
Reason: An error occurred while attempting to get the compression format for a file.
Action: See additional messages.
PC1564E (NT) Can't allocate compression information
Reason: There was an error allocating memory for the compression information for a file.
Action: Free memory and try again.
PC1565E Fatal file system error
Reason: Access to the device has been lost. The remainder of your operation (backup/restore) will fail.
Action: Repair access to the device
PC1566E Error flushing written data to disk
Action: See additional messages.
PC1567W (NT) File has Extended Attribute or ACL Stream
Reason: ID header that is unrecognized by this version of Windows. This non-file data stream will be skipped without preventing any of the other non- file data streams from being restored.
Action: See additional messages.
PC1568W (NT) File has Extended Attribute or ACL Stream
Reason: data that is unrecognized by this version of Windows. This non-file data stream will be skipped without preventing any of the other non- file data streams from being restored.
Action: See additional messages.
PC1569I (NT) Renaming locked file after reboot
Reason: Following this message are the names of two files. The first is an old file and the second is a new file. On the next reboot the old file will be deleted and the new file will be renamed to the old file name.
PC1570E (NT) Too many file rename operations
Reason: The number of restored temporary files to be renamed the next time the system boots is too many for the operating system to handle. Therefore, the following file name will not be renamed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1571E File exists after delete
Reason: This is an operating system error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1572E (NT) Can't copy operations to new SYSTEM hive
Reason: An error occurred while attempting to copy the PendingFileRenameOperations value from the current SYSTEM registry hive to the SYSTEM registry hive file that is to be restored. As a result any pending file renames or deletes will not be performed during the next system boot.
Action: See additional messages.
PC1573E (NT) Can't create a temporary SYSTEM key
Reason: An error occurred while attempting to create a temporary HKLM\HARDWARE\SYSTEM key in the registry. This key is needed in order to copy the PendingFileRenameOperations value from the current SYSTEM registry hive to the SYSTEM registry hive file that is to be restored.
Action: See additional messages.
PC1574E (NT) Can't create a key, it already exists
Reason: An error occurred while attempting to create a temporary HKLM\HARDWARE\SYSTEM key in the registry because this key already exists and should not. This key is needed in order to copy the PendingFileRenameOperations value from the current SYSTEM registry hive to the SYSTEM registry hive file that is to be restored.
Action: See additional messages.
PC1575E (NT) Can't load the SYSTEM registry hive file
Reason: An error occurred while attempting to load the SYSTEM registry hive file from the backup into the HKLM\HARDWARE\SYSTEM key in the registry. This is needed in order to copy the PendingFileRenameOperations value from the current SYSTEM registry hive to the SYSTEM registry hive file that is to be restored.
Action: See additional messages.
PC1576E (NT) Can't open the Select key
Reason: An error occurred while attempting to open the HKLM\HARDWARE\SYSTEM\Select key in the registry. This is needed in order to determine to which key, in the backup SYSTEM registry hive file, the PendingFileRenameOperations value from the current SYSTEM registry hive is to be copied.
Action: See additional messages.
PC1577W (NT) Can't create a registry cleanup file
Reason: An error occurred while attempting to create a registry cleanup file. This file is needed to delete the temporary HKLM\HARDWARE\SYSTEM key after the SYSTEM registry hive file to be restored has been modified. This is ok since the HKLM\HARDWARE\SYSTEM key will be deleted the next time the system is rebooted, but subsequent steps in the restore process may also encounter errors.
Action: See additional messages.
PC1578E (NT) Can't query the Select key Current value
Reason: An error occurred while attempting to query the Current value of the HKLM\HARDWARE\SYSTEM\Select key. This is needed in order to determine to which key, in the backup SYSTEM registry hive file, the PendingFileRenameOperations value from the current SYSTEM registry hive is to be copied.
Action: See additional messages.
PC1579E (NT) Can't open the Session Manager key
Reason: An error occurred while attempting to open the "HKLM\HARDWARE\SYSTEM\ControlSet###\Control\Session Manager" key in the registry. This is the key to which the PendingFileRenameOperations value from the current SYSTEM registry hive is to be copied.
Action: See additional messages.
PC1580E (NT) Can't copy PendingFileRenameOperation value
Reason: An error occurred while attempting to copy the PendingFileRenameOperations value from the current SYSTEM registry hive to the "HKLM\HARDWARE\SYSTEM\ControlSet###\Control\Session Manager" key in the registry. This is needed so that the HKLM\HARDWARE\SYSTEM key can be saved to the temporary SYSTEM registry hive file that will be restored.
Action: See additional messages.
PC1581E (NT) Can't save the temporary SYSTEM hive file
Reason: An error occurred while attempting to save the "HKLM\HARDWARE\SYSTEM\ControlSet###\Control\Session Manager" key in the registry to the temporary SYSTEM SYSTEM registry hive file that will be restored.
Action: See additional messages.
PC1582W (NT) Can't cleanup the temporary SYSTEM key
Reason: An error occurred while attempting to destroy the subkeys and values of the HKLM\HARDWARE\SYSTEM key in the registry. This is ok since the HKLM\HARDWARE\SYSTEM key will be deleted the next time the system is rebooted, but subsequent steps in the restore process may also encounter errors.
Action: See additional messages.
PC1583W (NT) Can't delete the temporary SYSTEM key
Reason: An error occurred while attempting to delete the HKLM\HARDWARE\SYSTEM key in the registry. This is ok since the HKLM\HARDWARE\SYSTEM key will be deleted the next time the system is rebooted, but subsequent steps in the restore process may also encounter errors.
Action: See additional messages.
PC1584E (NT) Can't alloc PendingFileRenameOperations buffer
Reason: An error occurred while attempting to allocate a buffer to be used for modifying the PendingFileRenameOperations value in the registry.
Action: See additional messages.
PC1585E (NT) Can't open the Session Manager key
Reason: An error occurred while attempting to open the HKLM\SYSTEM\ControlSet###\Control\Session Manager key in the registry. This key contains the PendingFileRenameOperations value which controls the system's file rename and delete operations the next time that it boots.
Action: See additional messages.
PC1586E (NT) Can't query PendingFileRenameOperations value
Reason: An error occurred while attempting to query the PendingFileRenameOperations value which controls the system's file rename and delete operations the next time that it boots.
Action: See additional messages.
PC1587E (NT) Can't set PendingFileRenameOperations value
Reason: An error occurred while attempting to set the PendingFileRenameOperations value which controls the system's file rename and delete operations the next time that it boots. Therefore, all files restored to temporary file names will not be renamed.
Action: See additional messages.
PC1588E (NT) Can't schedule Windows 9x file rename/delete
Reason: An error occurred while attempting to write the file rename and delete operations to the WININIT.INI file of a Windows 95 or Windows 98 system. WININIT.INI controls Windows 9x's rename and delete operations the next time that it boots. Therefore, all files restored to temporary file names will not be renamed.
PC1589E (NT) Can't schedule file rename operation
Reason: An error occurred while attempting to schedule a file rename operation. This is an UPSTREAM internal error. The name of the file to be renamed follows:
Action: Contact FDR/UPSTREAM Tech Support.
PC1590E (NT) Source file name for a rename is invalid
Reason: An error occurred while attempting to schedule a file rename operation because the source file name of the file to be renamed is invalid. The source file name follows. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1591E (NT) Target file name for a rename is invalid
Reason: An error occurred while attempting to schedule a file rename operation because the target file name of the file to be renamed is invalid. The target file name follows. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1592E (NT) Can't alloc file rename operation buffer
Reason: An error occurred while attempting to allocate a buffer to be used for scheduling a file rename operation. The name of the file to be renamed follows:
Action: See additional messages.
PC1593E (NT) Error renaming locked file
Reason: There was an error renaming the temporary file to the final file name.
Action: See additional messages.
PC1594W (NT) Error renaming locked file
Reason: You requested that locked files be renamed or replaced and there was an error during the process.
Action: See additional messages.
PC1595I (NT) Renaming locked file
Reason: Following this message are the names of two files. The first is an old file and the second is a new file. The old file is locked during the restore. The backup file will be restored to the new file.
PC1596I (NT) Renamed locked file after restore
Reason: Following this message are the names of two files. The first is an old file and the second is a new file. The old file is locked during the restore. The names of the old and new files have been swapped. The old file (now having the name of the new file) will be deleted on the next reboot.
PC1597E (NT) Error reading regular data stream header
Action: See additional messages.
PC1598E (NT) Error reading regular data stream data
Action: See additional messages.
PC1599E Error writing pending data
Reason: In a situation where data writes must be blocked into even multiples, there was an error writing pending data.
Action: See additional messages.
PC1600E (UNIX) Error in lseek call
Reason: While attempting to use lseek to seek, there was a system error.
Action: See additional messages.
PC1601E Error creating file structure
Reason: There was an error creating the internal file storage structure.
Action: Free memory and try again.
PC1602E Error setting drive for directory create
Reason: There was an error during a file open when the directory was attempting to be created, setting the default drive to the requested value.
Action: Be sure that the drive is ready then try again.
PC1603E Error getting directory for directory create
Reason: There was an error during a file open when the directory was attempting to be created, getting the current default directory for the specified drive.
Action: Be sure that the drive is ready then try again.
PC1604E Error creating directory
Reason: There was an error during a file open when the directory was attempting to be created.
Action: See additional messages.
PC1605E Error setting directory after directory create
Reason: There was an error during a file open when the directory was created setting the default directory to the directory successfully created.
Action: See additional messages.
PC1606E Error opening file
PC1607E Error removing old EOF marker in a text file
Reason: There was an error removing an old end-of-file marker in a text file when a file was opened for append.
Action: See additional messages.
PC1608E Error reading old EOF marker in a text file
Reason: There was an error reading the last byte of a text file opened for append.
Action: See additional messages.
PC1609E Error seeking old EOF marker in a text file
Reason: There was an error seeking to the last byte of a text file opened for append.
Action: See additional messages.
PC1610E Error seeking for block read
Reason: There was an error seeking for a location in a file for a block read.
Action: See additional messages.
PC1611E Error reading a block
Reason: There was an error reading a block of a file randomly.
Action: See additional messages.
PC1612E Not enough data (unexpected EOF)
Reason: During a block read, a block of a specific size was expected and the file did not contain enough data.
Action: The file has been corrupted. Delete the file and retry (if possible).
PC1613E Error writing a string
Reason: There was an error writing a string sequentially.
Action: See additional messages.
PC1614E Error writing a string EOL
Reason: There was an error writing the CR/LF combination after writing a string successfully.
Action: See additional messages.
PC1615E Error seeking for block write
Reason: There was an error setting the location for a block write.
Action: See additional messages.
PC1616E Error writing a block of data
Action: See additional messages.
PC1617E Error deleting a file
Action: See additional messages.
PC1618E Error seeking to the end of a file
Action: See additional messages.
PC1619E Access of a LAN file
Reason: The file to be opened is a LAN file.
Action: Purchase the LAN version of UPSTREAM.
PC1622E Error searching a directory (FindFirstFile WinNT)
Reason: There was an error searching the directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1623W Ignoring file with size over 4G (WinNT)
Reason: File found while searching the directory.
Action: Exclude this file.
PC1624W Invalid date and time for file (WinNT)
Reason: File found while searching the directory. Assuming date and time of 01/01/1980 12:00:00a.
PC1625E Error removing a directory
Action: See additional messages.
PC1626E (NT) Error getting file time
Action: See additional messages.
PC1627E (NT) Error setting file time
Action: See additional messages.
PC1628E (NT) Error reading Extended Attribute or ACL
Reason: stream header
Action: See additional messages.
PC1629E (NT) Error reading Extended Attribute or ACL
Reason: stream data
Action: See additional messages.
PC1630E (NT) Error writing Extended Attribute or ACL
Reason: Stream ID header
Action: See additional messages.
PC1631E (NT) Error writing Extended Attribute or ACL
Reason: Stream data
Action: See additional messages.
PC1632E (NT) Error skipping Extended Attribute or ACL
Reason: Stream data
Action: See additional messages.
PC1633W (NT) Error Extended Attribute stream too long
Reason: An extended attribute stream for a file has a size greater than or equal to 4GB and cannot be backed up.
Action: Exclude this file.
PC1634E (NT) Error restoring non-file data
Reason: The non-file data for a file or directory could not be restored because the "Restore files and directories" privilege could not be enabled.
Action: Ensure your account has the appropriate rights.
PC1635E (NT) Error backing up directory non-file data
Reason: The non-file data for a directory could not be backed up because the directory could not be opened.
Action: See additional messages.
PC1636E (NT) Error restoring directory non-file data
Reason: The non-file data for a directory could not be restored because the directory could not be opened.
Action: See additional messages.
PC1637E Error allocating extra data buffer
Reason: There was an error allocating the buffer to hold multi-file extra data.
Action: Reduce the number of duplicate files or free memory.
PC1638E Extra data position too large
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1639E (NT) Error restoring invalid non-file data
Reason: The non-file data for a file or directory could not be restored because it is not formatted properly.
Action: Contact FDR/UPSTREAM Tech Support.
PC1640E Non-file data for one or more files not restored
Reason: The non-file data for one or more files was not restored, probably because it was backed up from a different operating system than the one it is being restored for.
Action: Contact FDR/UPSTREAM Tech Support.
PC1641E Error allocating file find buffer
Reason: There was an error allocating a buffer needed to perform a file search operation.
Action: Free memory and try again.
PC1642E An attempt was made to read past the end of file
Reason: There was an attempt to read past the end of a file during a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC1643E Error remapping file view
Reason: There was an error remapping a view for a memory mapped file.
Action: Contact FDR/UPSTREAM Tech Support.
PC1644E Cannot determine pipe file size
Reason: A UNC pipe file spec was provided for a backup without a DASDOVERRIDE parameter. The only way for UPSTREAM to determine the amount of data that might be read from a pipe is for the user to inform UPSTREAM via a DASDOVERRIDE parameter. The DASDOVERRIDE parameter was either not provided or did not specify an absolute number. UPSTREAM cannot backup the data from the pipe.
Action: Supply a DASDOVERRIDE parameter with an absolute number of bytes as a value.
PC1645D (UNIX) Error in stat or lstat call
Reason: While retrieving details about a file found in a directory search, there was a file system error.
Action: See additional messages.
PC1646E (UNIX) Error in getcwd call
Reason: While searching for files in a directory, there was a system error.
Action: See additional messages.
PC1647E (UNIX) Error in getcwd call
Reason: While searching for files in a directory, there was a system error.
Action: See additional messages.
PC1648E (UNIX) Error in getcwd call
Reason: While searching for files in a directory, there was a system error.
Action: See additional messages.
PC1649E (UNIX) Error in opendir call
Reason: While searching for files in a directory, there was a system error.
Action: See additional messages.
PC1650E (UNIX) Error in llseek call
Reason: While attempting to use llseek to seek, there was a system error.
Action: See additional messages.
PC1651E (NT) Can't modify the SYSTEM hive backup file
Reason: The restoration of the SYSTEM registry hive was either canceled by the user or an error occurred while attempting to modify the SYSTEM backup registry hive file that was restored to disk. The original backup file was not modified and was not applied to the registry. The name of the original SYSTEM backup registry hive file follows.
Action: See additional messages.
Mid-Level Conversation Errors
PC1701E Error occurred during a TP_STARTED verb
Reason: If you are running OS/2 or Windows, a return code of 00010000 usually means a mismatch between the local LU alias and the communications manager local LU alias.
PC1702E Error occurred during a TP_ENDED verb
PC1703E Error occurred during an ALLOCATE verb
PC1704E Error occurred during a SEND_DATA verb
PC1705E Error occurred during a RECEIVE_AND_WAIT verb
PC1706E Error occurred during a CONFIRM verb
PC1707E Error occurred during a CONFIRMED verb
PC1708E Error occurred during a DEALLOCATE verb
PC1709E Error checking for storage server requests
Reason: If this is preceded by a 4825I (Port number already in use) it indicates that INPORT is in use by another copy of UPSTREAM or another task. If this is a service, look for another task using this port; if this is a single function, specify INPORT=0 to avoid the conflict.
PC1710E Error occurred during a TP_VALID verb
PC1711E Conversation type mismatch
Reason: UPSTREAM received a remote allocate that was invalid.
Action: Allocate probably not destined for this node.
PC1712E Bad sync level
Reason: UPSTREAM received a remote allocate that was invalid.
Action: Allocate probably not destined for this node.
PC1713E TPN not recognized
Reason: UPSTREAM received a remote allocate that was invalid.
Action: Allocate probably not destined for this node.
PC1714E Error testing remote allocate
Reason: There was an error testing for remote allocates before beginning a local allocate.
Action: See additional messages
PC1715E Expected data (state %d)
Reason: UPSTREAM received a state change when data was expected. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1716E Error allocating test conversation
Action: See additional messages.
PC1717E Error deallocating test conversation
Action: See additional messages.
PC1718I Remote allocate support disabled
Reason: UPSTREAM was started by the UPSTREAM Attach Manager to handle UPSTREAM user interface requests, you specified the environment variable USNORMT which intentionally disabled support for remote initiates, or you are running UPSTREAM with multiple user support enabled.
PC1719E Remote allocate checks are taking too long
Reason: The internal UPSTREAM timer checks for remote requests of UPSTREAM functions every 5 seconds. The last check took more than 5 seconds so UPSTREAM is disabling this check.
Action: You should adjust your APPC software so that Remote Allocate checks return as quickly as possible (usually a value of 1).
PC1720E Remote allocate checks seem locked
Reason: UPSTREAM has waited more than 1 minute for a remote allocate check to return. This indicates that your communications software has locked.
Action: A reboot would be suggested.
PC1721D Remote allocate support was disabled
Reason: UPSTREAM has disabled the support for remote initiates due to a previous condition.
Action: Check the log to determine why remote initiates were disabled.
PC1725E Bad send state
Reason: The conversation can not support the send request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1726E Bad receive state
Reason: The conversation can not support the receive request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1727E Bad confirm state
Reason: The conversation can not support the confirm request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1728E Bad confirmed state
Reason: The conversation can not support the confirmed request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1729E Bad flush state
Reason: The conversation can not support the flush request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1730E Bad send error state
Reason: The conversation can not support the send error request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1731E Incomplete received
Reason: A receive and wait buffer was too small. Often this indicates a communications error either locally or on the Storage Server.
Action: Check the Storage Server log.
PC1732E Bad flush send state
Reason: The conversation can not support the flush request made. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1733E NULL receive buffer
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1734E Broken connection
Reason: During a CONFIRMED operation, the connection was broken from the remote.
Action: See Storage Server log.
PC1740E Cannot start a conversation
Reason: A communications conversation cannot be started because neither APPC or TCP/IP is installed.
PC1753E Can't allocate record packing record
Action: Disable record packing or free memory.
PC1754E Record packing error
Reason: A data record was larger than the entire buffer received. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1755E Invalid packing type
Reason: The remote specified a packing type not allowed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1756E Invalid packing type (standard)
Reason: The remote specified a packing type not allowed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1757E Invalid packing type (fixed)
Reason: The remote specified a packing type not allowed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1758E Invalid packing type (variable)
Reason: The remote specified a packing type not allowed.
Action: Contact FDR/UPSTREAM Tech Support.
PC1759E Length mismatch (rcvd %ld, data %ld)
Reason: The length received does not match the length in the first two bytes of data. Internal protocol error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1760E Receive too small (%ld)
Reason: All receives must be 2 bytes or more. Internal protocol error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1761E Packed receive too small
Action: Retry your restore disabling record packing.
PC1763E External receive data too large (%u > %u)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1765E Too many conversations
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1766E Invalid conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1767E Invalid conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1768E No conversation ID set
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1769E No conversation in progress
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1770E Invalid record packing conversation
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1771E Set bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1772E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1773E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1774E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1775E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1776E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1777E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1778E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1779E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1780E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1781E Bad conversation number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1782E Not a packing conversation for receiving
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1783E Not a packing conversation for sending
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1784E Occurred during a get allocate
PC1785E Occurred during test for remote allocate
PC1786E Occurred during free conversation
PC1787E Conversation lost.
Reason: The CONV=WAIT or CONV=KEEP batch job conversation was lost and USRETRYWAIT was not set, so a new conversation is not started.
PC1788E Prior error - see client upstream.log file
PC1789E Prior error - see client upstream.log file
PC1790E Prior error - see client upstream.log file
PC1791E Occurred freeing conversation
Abort Messages
These are informational messages that are displayed in message boxes and allow the user to press ABORT
PC1799N Starting session
Reason: You can press CANCEL to abort the session start function. This message will go away if there is an error or the session has started successfully.
here you are
PC1800N Waiting for session to activate
Reason: You can press CANCEL to abort waiting for the session to start automatically. This message will go away if there is an error or the session has started successfully.
Backup File Access Errors
PC1801E Error writing description to the backup file
Reason: There was an error writing the backup description record (record #1) to the internal backup file.
Action: See additional messages.
PC1802E Error writing the specs to the backup file
Reason: There was an error writing a file specification to the internal backup file.
Action: See additional messages.
PC1803E Error writing file info to the backup file
Reason: There was an error writing a file information record to the internal backup file.
Action: See additional messages.
PC1804E Error writing description to the backup file
Reason: There was an error writing the backup description record (record #1) to the internal backup file when the file information was completely written.
Action: See additional messages.
PC1805E Error deleting backup file
Reason: There was an error deleting the internal backup file.
Action: See additional messages.
PC1806E Error creating the backup file
Reason: There was an error creating the internal backup file.
Action: See additional messages.
PC1807E Error writing parameters to the backup file
Reason: There was an error writing the non-repeating parameters to the internal backup file during its creation.
Action: See additional messages.
PC1808D File spec specifies no more files
Reason: The following backup file spec specifies a drive or mount point where no additional files could be found to be backed up. This usually occurs when a drive or mount point has been lost, unavailable or represents redundant data.
Action: Validate the drive or mount point connection and verify that it's not a redundant spec.
PC1809E No valid files to back up
Reason: There are no valid files in any of your file specs to backup. The backup will not be performed. Usually this occurs when one or more connections to drives or mount points have been lost.
Action: Validate the drive or mount point connection.
PC1810W Backup specification not found
Reason: The backup specification directory was not found on the specified drive.
Action: Check your file set specification.
PC1811W No files found for file specification
Reason: An include file specification was specified for which no files were found.
Action: Check your file specifications.
PC1812W File name too long %s (%d)
Reason: UPSTREAM can support file names up to 1023 bytes
PC1813E Error creating backup parameter file
Reason: There was an error creating the parameter file which is associated with a backup file.
Action: See additional messages
PC1814E Error reading backup file to delete
Reason: There was an error reading the backup file for the purpose of deleting the parameter file attached to it. There will be a file left on disk.
Action: See additional messages
PC1815E Error deleting param file attached to backup
Reason: There was an error deleting the parameter file attached to the backup file. There will be a file left on disk.
Action: See additional messages
PC1819E No files found for one or more file specifications
Reason: The entire backup failed because FAILIFNOFILES=Y was specified for one or more include file specifications for which no files were found.
Action: Check your file specifications.
PC1820E Error saving backup parameters
Reason: There was an error saving the original backup parameters temporarily so that modified parameters can be used.
Action: See additional messages.
PC1821E Error recovering backup parameters
Reason: There was an error retrieving the parameters that you originally specified. The parameters (as displayed) are now incorrect.
Action: See additional messages.
PC1822E Error adding a file spec
Reason: There was an error setting the current file spec after adding an existing one.
Action: See additional messages.
PC1823E Error copying to new file spec
Reason: When creating a new file spec, there was an error copying parameters from an existing file spec.
Action: See additional messages.
Backup File Validity Errors
PC1825W Old backup file
Reason: The backup file detected on disk is not usable because it hold a version which does not match the version of the software. The backup will begin from the beginning.
PC1826W Backup file not completed
Reason: The backup file detected on disk is not usable because it did not complete. The backup file will be regenerated and the backup will start from the beginning.
PC1828E File specification has invalid network name
Reason: The file specification has a Universal Naming Convention (UNC) prefix which contains an invalid network name.
Action: Correct the file specification and try again.
PC1829E Invalid UNC name
Reason: The file specification contains an invalid UNC name.
Action: Respecify.
PC1830E Duplicate repository file name too long (%s)
Reason: When backing up to USTDUPFL, you can only back up files whose file name length (not including the path) is 30 bytes or less. This file will be automatically excluded.
PC1831E Error opening a file to calculate disk size
Reason: There was an error opening a file to calculate the size of the sequential disk file to be created for this back up on your Storage Server.
Action: See additional messages.
PC1832E Error accessing non-file data for disk calc
Reason: There was an error accessing non-file data so as to be able to calculate the total number of bytes that will be used to create the Sequential Disk file on the Storage Server for this backup. In most cases this won't be a problem but if you have a lot of these errors the file may be too small or go into secondary extents.
Action: See additional messages.
PC1833E Error accessing non-file data for DASD calc
Reason: There was an error accessing non-file data so as to be able to calculate the total number of bytes that will be used to create the Sequential Disk file on the Storage Server for this backup. In most cases this won't be a problem but if you have a lot of these errors the file may be too small or go into secondary extents.
Action: See additional messages.
PC1834E Error creating new file spec
Reason: There was an error allocating memory for a file specification during the backup file build.
Action: Free memory and retry or specify fewer file specifications.
PC1835E Error creating a directory level
Reason: There was an error allocating memory for a directory level during the backup file build.
Action: Free memory and retry or specify the subdirectories explicitly.
PC1836E Insufficient memory.
Reason: There was an error allocating memory for a subdirectory entry during the backup file build.
Action: Free memory and retry or specify the subdirectories explicitly.
PC1837D Backup specification not found
Reason: The backup specification directory was not found. This is expected if you are in a sysplex environment and are backing up a mounted file system. Otherwise you specified an invalid file specification.
PC1838I Deleted file %s - unmatched spec
Reason: This file will be marked deleted anyway and the first spec will be used.
PC1839W Deleted uncommitted backup, Profile: %s, Version: %s
PC1840E Volume doesn't support last access date
Reason: You requested a restricted backup based on last access date. The volume you are backing up does not support this field.
Action: Respecify.
PC1841E Only valid for full merge backups
Reason: You can only specify a migration or retention of deleted files when performing a full merge backup.
Action: Respecify.
PC1842W Can't migrate changed file
Reason: The following file has changed, yet it was specified for migration. This file will not be deleted.
PC1843E Error opening incremental file
Reason: There was an error opening to read the required last backup file used for incrementals.
Action: See additional messages. You must perform a full before performing incrementals. You must move the incremental file if you are changing your WORKPATH.
PC1844E Error opening incremental file
Reason: There was an error opening to write the required last backup file used for incrementals.
Action: See additional messages.
PC1845E Error reading incremental file
Reason: There was an error reading the required incremental file.
Action: See additional messages.
PC1846E Error writing incremental file
Reason: There was an error writing the required incremental file.
Action: See additional messages.
PC1847E Parameter inconsistency
Reason: You specified DATELIMIT but did not specify a LATESTDATE.
Action: Respecify.
PC1848E Latest date incorrect
Reason: The format must be YY:MM:DD.
Action: Respecify.
PC1849E Latest time incorrect
Reason: The format must be HH:MM:SS.
Action: Respecify.
PC1850E Not AIX journaled file system
Reason: The file specification (below) is not part of the normal AIX journaled file system. Only JFS and user defined file system files may be backed up with UPSTREAM.
Action: Respecify.
PC1851W Skipping non journaled file system
Reason: The following directory was included in the file specification, but is not a journaled file system and thus will not be included in the backup.
PC1852W Skipping files not owned by the effective User
Reason: You must be running with root user authority to backup files you do not own.
PC1853D Error opening incremental file
Reason: There was an error opening to read the required last backup file used for incrementals. It will be assumed that a full backup has not been done before. All files will thus be marked has having NOT been changed and the Storage Server will request all files not matching previous backups or in USTDUPFL.
PC1854E Error allocating memory
Reason: There was an error allocating memory for the backup restore file.
Action: Free memory or disk and retry.
PC1855E Unexpected EOF
Reason: Unexpected end of file reading the backup/restore file. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1856I Backup not completely started
Reason: This backup can not be restarted.
PC1857I Restore not completely started
Reason: This backup can not be restarted.
PC1858W Path name too long
Reason: The following path name is too long and its subdirectories will not be traversed. The file name below has more characters than the UPSTREAM software can support.
Action: You can increase the maximum file name size with the MAXFILENAMESIZE value set up to 1023. If using UPSTREAM/MVS, and it's greater than 255 you must also set USLONGTRUNCNAMES to any value.
PC1859E ioctl failed for raw device
Reason: The ioctl used to get raw device information failed.
PC1860E Open failed for raw device
Reason: Could not get raw device information.
PC1861E Raw device too large
Reason: Can not back up devices over 2gig on AIX 3.2.
PC1862E Can't read a backup file record
Reason: An error occurred while attempting to read a record from the backup file.
PC1863E Not local UFS, ZFS, SAMFS or Veritas file system
Reason: The file specification (below) is not part of a local Solaris recognized file systems. Only files in a local recognized and supported file system may be backed up with UPSTREAM.
Action: Respecify.
PC1864W Skipping non UFS or Veritas file system
Reason: The following directory was included in the file specification, but is not a Solaris UFS or Veritas file system and thus will not be included in the backup. This is a normal message for automounted local directories as they are backed up by their actual directory location.
PC1865E read_vtoc failed for raw partition
Reason: Could not get partition info for raw device.
PC1866D File exceeds maximum size
Reason: The following file exceeds the MaxKFileSize specified.
PC1867W Not local HFS or VxFS file system
Reason: The file specification (below) is not part of a local HPUX HFS or VxFS file system. Only files in a local file system may be backed up with UPSTREAM.
Action: Respecify.
PC1868W Skipping non HFS or VxFS file system
Reason: The following directory was included in the file specification, but is not a HPUX HFS or VxFS file system and thus will not be included in the backup.
PC1869E Unexpected EOF
Reason: Unexpected end of file reading the backup/restore incremental date file. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1870W Backup file corrupt
Reason: The existing backup file is not usable. It will be deleted and any prior restarts will not be serviced.
PC1871E Bad UNC file specification
Reason: A UNC file specification must consist of three components: \\MACHINE\SHARE\FILE_SPEC. One or more of these components are missing.
Action: Respecify
PC1872E Not HFS file system
Reason: The file specification (below) is not part of the normal HFS file system. Only HFS files may be backed up with UPSTREAM.
Action: Respecify.
PC1873W Skipping non HFS file system
Reason: The following directory was included in the file specification, but is not a HFS file system and thus will not be included in the backup.
PC1874E Unable to obtain file system type
Reason: An error occurred obtaining the file system type for the file specification (below). This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1875W Skipping directory from unknown file system type
Reason: An error occurred obtaining the file system type for the following directory and thus will not be included in the backup.
PC1876W Not local UFS or AdvFS file system
Reason: The file specification (below) is not part of a local Tru64 UNIX UFS or AdvFS file system. Only files in a local file system may be backed up with UPSTREAM.
Action: Respecify.
PC1877D Skipping non UFS or AdvFS file system
Reason: The following directory was included in the file specification, but is not a Tru64 UNIX UFS or AdvFS file system and thus will not be included in the backup.
PC1878D Skipping zero length Tru64 UNIX partition
Reason: The following raw device was included in the file specification which refers to a zero length or unallocated disk partition.
PC1879D Skipping partition on unlabeled disk
Reason: The following raw device was included in the file specification which refers to a partition other than c on an unlabeled disk. Only the c partition can be backed up on an unlabeled disk.
PC1880E Exceeded maximum backup size
Reason: Your backup exceeded the maximum size that your administrator has allowed for you.
Action: Contact your FDR/UPSTREAM administrator.
PC1882E Error flushing backup file to disk
Action: See additional messages.
PC1883E Error adding entry to sort list
Reason: This is usually a memory error.
Action: Free memory or close programs.
PC1884E Error creating sort file
Action: See additional messages.
PC1885E Error starting sort
Reason: This is generally a memory shortage.
Action: Close applications or free memory.
PC1886E Error deleting sort file
Action: See additional messages.
PC1887E Empty sort tree
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1888E Error writing sort file
Action: See additional messages.
PC1889E Error reading sort file
Action: See additional messages.
Exclude Errors
PC1890E Unable to allocate exclude file spec storage
Action: Close some other applications and try the UPSTREAM function again.
PC1891E Invalid exclude file spec
Reason: An exclude file spec must be a UNC file spec (\\server\share or !:\server\share) or a fully qualified non-UNC file spec that contains a drive letter followed by ":\".
Action: Fix the exclude file spec and try the UPSTREAM function again.
PC1892W Unable to open exclude file
Reason: Exclude file (the file name as specified follows) can not be opened and will not be processed.
Action: Check if the file exists and you have read access to it.
PC1893W Exclude spec will exclude everything
Reason: The following exclude spec listed in the following global exclude list file will cause all files and directories to be excluded from the backup or restore. This does not apply to component files that would be backed up when using the WinSS PlugIn.
Action: Remove the exclude spec from the global exclude list file.
PC1894E File too long to be excluded: %s
Reason: This is unexpected. Contact tech support.
Additional Backup Build Errors
PC1898E Merge type back to master not supported for z/OS
Reason: This is a Reservoir only parameter. To get this feature on z/OS you must specify it on the profile.
PC1899E Too many files for full merge backup (%s>=%s)
Action: Break the backup up into multiple smaller backups. If this is not to UPSTREAM/MVS or you have been advised by UPSTREAM tech support you can disable this message with the environment variable USNOMAXFILES.
Intercomputer Structure Build/Parse Errors
PC1900E Build structure overflow
Reason: When building a record for transmission, the data overflowed the structure passed in.
Action: Specify a larger record size.
PC1901E Unexpected received data type
Reason: A data record was received which contained data which was unexpected. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1902E Parse structure overflow
Reason: When extracting received data, the data overflowed the buffer available.
Action: Specify a larger record size.
PC1903E Field size overflow
Reason: When extracting received data, the data overflowed the field available. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1904E Field not exact size
Reason: When parsing received data, a data record was not the size expected. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1905E Received length too large
Reason: When parsing received data, a data field was larger than the buffer to hold it.
Action: Specify a larger record size.
PC1906E Received data area not created
Reason: The received data buffer was not created before a request to parse data was received. Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1907E Build structure overflow during fold
Reason: When building a record for transmission, when attempting to fold lower case to upper case, the data overflowed the structure passed in.
Action: Specify a larger record size.
PC1908E Invalid date format
Reason: When converting a date from normal to Julian format, the date was not in the correct format (MM-DD-YY). This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1909E (UNIX) Received invalid flag length field
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1910E (UNIX) Received invalid flag length field
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1911E (UNIX) Received invalid flag length field
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1912E (UNIX) Internal invalid flag length field
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1913E (Status) Received bad opcode
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1914E (Backup Build) Position out of range
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1915D Registered name too long (%s)
Reason: Registered names are restricted to 16 bytes. This name will be truncated.
Action: Wait for the name to age out or call technical support.
PC1916E Invalid console subtype (got 0x%x, expected 0)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1917E Error generating PassTicket.
Reason: The env.var. for PassTicket sign on key must have exactly 16 hex. digits. Check your setting:
PC1918E Length not new or old format: 0x%x
Action: Call tech support.
PC1919E Insufficient memory creating tape list of Reservoir system
Action: Free memory of close applications.
PC1920E Too many tape drives for memory
Action: Contact tech support.
Backup State Errors
PC1923E It is unsupported to have '.' or '..' as a directory level in a path name
PC1924E Read sorted backup file error: %s
PC1925I User specified USBACKUPPACKRECSIZE of %u
PC1926I User specified USRESTOREPACKRECSIZE of %u
PC1927I All files will be backed up (truncation used)
Reason: You can disable truncation by specifying USNOLONGTRUNCNAMES
PC1928I Specified USNOLONGTRUNCNAMES to avoid truncation
PC1929E Internal error %s in backup index file
Action: Call tech support.
PC1930E I/O error accessing backup index file.
PC1931E Internal error accessing updated backup file: %s
Action: Call tech support.
PC1932E Insufficient memory to add to memory backup file
Action: Specify the USBIGBACKFILE environment variable, free memory or close applications.
PC1933E Insufficient memory to begin using backup file
Action: Specify the USBIGBACKFILE environment variable, free memory or close applications.
PC1934I Using large, traditional backup file
Reason: You specified the USBIGBACKFILE environment variable.
PC1935E Your request of a packing size of %s is denied
Reason: The storage server can not support a packing size greater than 32700. If you specify a larger value, record packing will be disabled and performance will suffer.
Action: Specify a PACKRECSIZE of 32700 until you can upgrade your storage server.
PC1936D (Backup) Invalid calculated block: %u + (%u mod %u) for %s
Reason: The formula above results in 0 which would cause a divide by 0 which would be fatal. This will disable subsequent sparse file handling.
Action: Call tech support.
PC1937D (Backup) Invalid block size: %u for %s
Reason: The block size is expected to be an even divisor of 512. This will disable subsequent sparse file handling.
Action: Call tech support.
PC1938E (Backup) Error opening the tape drive for restore
Reason: Used for the SAN Express Direct.
PC1939E (Backup) Error opening the tape drive for backup
Reason: Used for the SAN Express Direct.
PC1940E (Backup) Insufficient memory
Reason: There was not enough memory to add to the truncated files tree.
Action: Close applications or free memory.
PC1941D (Backup) Duplicate truncated files
PC1942E (Backup) Insufficient memory
Reason: There was not enough memory to create the truncated files tree.
Action: Close applications or free memory.
PC1943E (Backup) Encryption requested and not supported
Reason: The storage server is unable to support encryption.
Action: Upgrade the storage server to an encryption supported level. Note that only Reservoir supports encryption.
PC1944E (Backup) File spec too long
Reason: The following file spec is longer than the 255 character limit allowed by FDR/UPSTREAM/MVS. The backup failed.
PC1947I Using reduced negotiated file name length of %u
PC1948E (VMWare) Expecting volume directories in %s
Reason: VMWare did not set up the environment in an expected way.
PC1949E VMWare bad parameter %s %s
PC1950E VMWare specific backups not supported
Action: You must run this on a Windows Proxy server using UPSTREAM v3.5.1 or higher.
PC1951I Estimated size %s
PC1952I Backup completed without any mismatched files
PC1953I Beginning phase 3, %u mismatched files/dirs
PC1954I Restarting at file: %s
PC1955E Uncommitted backup
Reason: No files were transmitted so this backup will be considered failed.
PC1956W Non-communications migration test complete, %s of %s
PC1957W (Backup) ASR directory not created
Reason: The required ASR directory was not created before attempting to create an ASR diskette.
Action: See additional messages.
PC1958E Error switching to begin restore of tape
PC1959E Error setting initial backup tape pos
Action: Contact FDR/UPSTREAM Tech Support.
PC1960E Invalid tape position at %u should be %u
Reason: This usually indicates that your drive mappings are incorrect and need to be reestablished.
PC1961E Error occurred switching tape control back
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1962E Tape server does not support SAN backups
Action: You must turn off the SAN option to run this backup.
PC1963E Error occurred sending tape write location
PC1964E Error occurred at tape end of media
PC1965E In SAN processing, unknown record type 0x%x
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1966I SAN %s requested
PC1967W SAN backups are valid only for tape.
Reason: SAN backups are now disabled.
PC1968W SAN backups not supported
Reason: SAN backups are now disabled.
PC1969E FAILIFSKIP specified and a file was skipped
Action: Restart the backup or repair the problem that caused the file skip.
PC1970E Invalid receive started state (%u)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC1971E Machine alias too long (%s)
Reason: UPSTREAM requires that the machine alias be no longer than the original machine name.
Action: Respecify
PC1978I (Backup) The BACKUPREPARSEFILES parameter was changed
Reason: The BACKUPREPARSEFILES parameter was changed to a value of 1 for the following file spec. This was done to ensure that the REPARSE data for the files are backed up.
PC1979I (Backup) An ASR diskette was created
Reason: An ASR diskette was created for the specified computer. Label the diskette with the two lines that follow this message. Keep this ASR diskette in a safe place so that you have access to it if and when you need to recover this computer.
PC1980W (Backup) There is no diskette in drive A:
Reason: You requested that an ASR diskette be created during the backup, but there is no diskette in the A: drive.
Action: Insert a blank diskette in the A: drive and run the backup again.
PC1981W (Backup) Can't copy file to diskette
Reason: You requested that an ASR diskette be created during the backup, but an error occurred while attempting to copy one or more ASR files to the diskette.
Action: Examine the Windows error number to determine why the file could not be copied to the diskette.
PC1982W (Backup) The diskette is not blank
Reason: You requested that an ASR diskette be created during the backup, but the diskette in the A: drive is not blank.
Action: Insert a blank diskette in the A: drive and run the backup again.
PC1983W (Backup) Too many ASR capable machines
Reason: You requested that an ASR diskette be created during the backup, but the backup targeted more than one ASR capable machine.
Action: To create an ASR diskette the backup must target only one ASR capable machine.
PC1984W (Backup) No ASR capable machines
Reason: You requested that an ASR diskette be created during the backup, but the backup did not target any ASR capable machines.
Action: To create an ASR diskette the backup must target only one ASR capable machine.
PC1985E (Backup) Can't set ASR restore parameters
Reason: An error occurred while attempting to set the parameters needed to perform the ASR restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC1986E (Backup) Can't copy US.ser file
Reason: An error occurred while attempting to copy the US.ser file from the main UPSTREAM directory to the following ASR directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1987E (Backup) Can't copy USASR.dat file
Reason: An error occurred while attempting to copy the USASR.dat file from the main UPSTREAM directory to the following ASR directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1988E (Backup) Can't copy USASR.exe file
Reason: An error occurred while attempting to copy the USASR.exe file from the main UPSTREAM directory to the following ASR directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC1989E (Backup) No accessible disks were found
Reason: A full system file spec was encountered for which no accessible disk drives could be found. You may be running UPSTREAM as a service under the LocalSystem account and have the USUSEUNCFULLSYSTEM environment variable set. If this is the case either run the UPSTREAM service under a user account or stop using the USUSEUNCFULLSYSTEM environment variable.
Action: Contact FDR/UPSTREAM Tech Support if the scenario described above is not true.
PC1990E (Backup) Can't modify the disk list
Reason: An error occurred while attempting to check the cluster status of a machine or modifying the list of disk drives for the machine.
Action: Contact FDR/UPSTREAM Tech Support.
PC1993E (Backup) Can't create a full system file spec
Reason: An internal UPSTREAM error occurred which prevents the addition of one or more dynamic file specs needed to backup or restore a complete computer system.
Action: Contact FDR/UPSTREAM Tech Support.
PC1994E (Backup) Can't modify a full system file spec
Reason: An internal UPSTREAM error occurred which prevents the modification of one or more dynamic file specs needed to backup or restore a complete computer system.
Action: Contact FDR/UPSTREAM Tech Support.
PC1995E (Backup) Invalid intermixing of file specs
Reason: You have one or more full system file specs specified with one or more non-full system file specs. Such a combination is not supported.
Action: Your include file specs should be of the full system file spec variety only if you want to backup the full system state of one or more computers.
PC1996E (Backup) Invalid full system file spec parameters
Reason: You specified one or more full system file specs for a file transfer operation. This is not supported.
Action: Respecify.
PC1997E (Backup) Can't save original parameters
Reason: An internal UPSTREAM error occurred which prevents the saving of your original parameters before the creation of one or more dynamic full system file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC1998E (Backup) Can't enumerate disk drives
Reason: An operating system error occurred which prevents the enumeration of the disk drives for the following computer.
Action: Contact FDR/UPSTREAM Tech Support.
PC1999E (Backup) Can't restore original parameters
Reason: An internal UPSTREAM error occurred which prevents the restoration of your original parameters after the creation of one or more dynamic full system file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC2000E Error occurred during a backup build file
PC2001E Error occurred during a backup start conv
PC2002E Error occurred during a backup send description
PC2003E Error occurred during a backup received started
PC2004E Error occurred during a backup send file info
PC2005E Error occurred during a backup send file data
PC2006E Error occurred during a backup confirm
PC2007E Error occurred during a backup end conversation
PC2008E Error occurred at the end of a backup
PC2009E (Backup) Can't create an expanded file spec
Reason: An internal UPSTREAM error occurred which prevents the addition of one or more dynamic file specs needed to backup with wildcards in a directory specification.
Action: Contact FDR/UPSTREAM Tech Support.
PC2010E Error occurred during a restart read file
PC2011E Error occurred during a restart start conv
PC2012E Error occurred during a restart send restart
PC2013E Error occurred during a restart receive desc
PC2014E Error occurred while deleting files
PC2015E Error occurred during the merge
PC2016E (Backup) No directories match wild cards.
Reason: Your backup specification has wild cards, but no existing directory path matches it.
Action: Respecify.
PC2017I (Backup) Specifications with wild cards expanded.
Reason: The process of expansion of backup specifications with wild cards resulted in this number of specs:
PC2018I Backup Profile: %s Version date: %s
PC2019E Invalid full system file spec (%s).
Reason: You most likely wanted to specify \\.
Action: Respecify
PC2020E Unwritten record unexpected
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2021E Error reading backup file
Reason: While attempting to reset the archive bits for duplicate files at the end of the backup there was an error reading the backup file.
Action: See I/O messages.
PC2022D Switching to tape (%ld MB >= %ld MB)
Reason: The specified SWITCHTOTAPEMB value was exceeded and the backup will now go to tape.
PC2023E Skip backup scan requires DASDOVERRIDE
Reason: If you skip the backup scan and are performing a disk or UPSTREAM/SOS local backup disk backup, you must specify a DASD override.
Action: Respecify.
PC2024E Skip backup scan can't use CALCDASDSIZE
Reason: The SKIPBACKUPSCAN and CALCDASDSIZE parameters cannot be specified together.
Action: Respecify.
PC2025E Unknown backup state
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2026E Error allocating record data
Reason: Memory was not available to allocate the record for the backup.
Action: Either specify a smaller record size or turn off compression.
PC2027E Compression error
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2028E Error reading file attributes
Reason: This error may affect resetting the archive bit but the file will be included in backup/restore.
Action: See additional messages.
PC2029W Error setting file attributes
Action: See additional messages.
PC2030E Backup file unusable for restarted backup
Reason: The backup never started. It must be rerun.
PC2031I File name too long: %s (%d)
Reason: The file name above has more characters than the FDR/UPSTREAM software can support.
Action: You can increase the maximum file name size with the MAXFILENAMESIZE value set up to 1023. If using UPSTREAM/MVS, and it's greater than 255 you must also set the USLONGTRUNCNAMES environment variable to a value of 'Y' (without the single quotes). Environment variables can be set in the USEnv.dat file in your UPSTREAM directory or can be added to your set of parameters, for example: USLONGTRUNCNAMES Y
PC2032E Restarted backup mismatch
Reason: The remote version date does not match the version date in the version file. The backup is not restartable.
PC2033E Error recovering parameters during restart
Reason: There was an error recovering the original parameters specified at backup time.
Action: See additional messages
PC2034E Error using backup file specifications
Reason: There was an error using the file specifications stored in the backup file. The backup is not restartable.
PC2035E Error saving parameters during restart
Reason: There was an error saving the current parameters to restore the parameters at the backup time.
Action: See additional messages
PC2036E Error creating the specification hold area
Reason: Memory ran short while attempting to create a structure to hold file specifications.
Action: Free memory, specify a smaller record size or turn off compression.
PC2037D Error retrieving original transfer specs
Reason: There was an error retrieving the transfer specifications that were in place before the restarted backup was attempted. This should not affect the success or failure of the transfer.
PC2038E Error retrieving original transfer parms
Reason: There was an error retrieving the transfer parameters that were in place before the restarted backup was attempted. This should not affect the success or failure of the transfer.
PC2039E Remote saw transfer as completed
Reason: The remote did not recognize that the backup had failed even though the PC thinks that it did. The backup is thus not restartable.
PC2040I Error opening backup data file - continue
Reason: This is a non-fatal error
PC2041E File open error aborted the backup
Reason: The backup aborted because a file to be backed up was not available for open.
PC2042I Error reading backup data file - continue
Reason: This is a non-fatal error
PC2043E File read error aborted the backup
Reason: The backup aborted because a file to be backed up was not available for read.
PC2044W Error creating backup timer
Reason: There was an error creating the backup timer. The backup should continue normally, however you will not be able to suspend the backup.
PC2050I Backup started (%s)
PC2051D Backup successful, %s of %s
PC2052D Backup complete with some ignored failures, %s of %s
PC2053D Backup failed, %s of %s
PC2054I Restarted backup started
PC2055W Backup suspended
PC2056I File transfer send started
PC2057D File transfer successful, %s of %s
PC2058D File transfer complete with some ignored failures, %s of %s
PC2059D File transfer failed, %s of %s
PC2060W File transfer suspended, %s of %s
PC2061E Suspend for specified percent complete (%ld)
PC2062E Suspend because time limit exceeded (%ld)
PC2063D Failed due to bad file specification
PC2064W Backup canceled
PC2065W Non-communications perf. test complete, %s of %s
PC2066E Error determining if a volume is NTFS
PC2067E Error writing committed backup info
Action: See additional messages
PC2068E Error writing committed backup info
Action: See additional messages
PC2069E Before restart point
Reason: The backup has not yet reached the point where a restart can be attempted.
Action: The backup has been committed "as is". Future backups will pick up any data that was not included in this one.
PC2070E Backup/Restore failed
Reason: There was a fatal LAN error with the server that was being backed up from or restored to. The name of the server follows.
Action: Restore the LAN connection to the server and restart the failed backup or restore.
PC2072E Backup/Restore failed
Reason: There was a fatal error accessing the file system.
Action: Other messages contain the exact reason for the failure. Correct the problem and restart the failed backup or restore.
PC2073E Backup file inconsistency read %lu, of %lu
Reason: Internal error.
Action: Report the complete error with the subsequent messages to UPSTREAM technical support.
PC2074W Position out of range (%lu larger than %lu)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2075E Original backup not completely started
Reason: None of the files from the original backup ever reached the Storage Server.
Action: Restart the backup.
PC2076D Clock adjusted to Storage Server clock.
PC2077E Error creating the delta file
Reason: There was an error creating the file containing the time change. This will affect the USSTART program if it is currently running.
Action: See additional messages. If USSTART is running, stop and restart.
PC2078E Restart not specified
Reason: There was a backup file, but the original backup was not specified as restartable.
PC2079E Past restart point
Reason: The backup has passed the point where a restart can be attempted.
Action: The backup has been committed "as is". Future backups will pick up any data that was not included in this one.
PC2080D Automatic delete to begin
PC2081D Automatic file deletion complete
PC2082E Error starting backup open file thread
Reason: There was an error starting the backup open file thread.
Action: Contact FDR/UPSTREAM Tech Support.
PC2084E Error allocating memory
Reason: There was an error allocating memory to hold information for file open threads.
Action: Specify a smaller number (NUMBACKUPTHREADS) or free memory or disk space.
PC2085D A previous backup dataset was unavailable
Reason: When performing the merge, the Storage Server attempted to dynamically allocate a dataset from a previous backup and it failed. Files which were on this backup will be requested from the client.
Action: See the Storage Server log.
PC2086E One of your file specs is empty
Action: Enter a file specification in every file spec.
PC2087E Backup profile name invalid
Reason: The backup profile name you specified can not be used to create a file name on the Storage Server and is thus invalid.
Action: Make sure the length is less than or equal to 8 and that the first character is an alphabetic character or a '$', '#' or '@'.
PC2089D Dummy profile specified
Reason: FDR/UPSTREAM will back up the file information only; no file data will be backed up and restores are prohibited. These profiles are only for testing.
PC2090E Unknown duplicate flags
Reason: The FDR/UPSTREAM Storage Server sent duplicate flags to your machine which were unrecognized.
Action: Upgrade FDR/UPSTREAM on your machine.
PC2091W Skipped %ld files
PC2092E Error saving parameters to add migration specs
Action: See additional messages.
PC2093D Received bad position number
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2094E Error creating backup open file event
Reason: There was an error creating one of the synchronization events for the backup open file thread.
Action: Contact FDR/UPSTREAM Tech Support.
PC2095E A migration only backup was specified
Reason: You specified a migration only backup and there were no migrated files.
Action: Respecify.
PC2096E Storage type not allowed
Reason: You may not specify a keyed or archived type backup for a migration backup.
Action: Specify a sequential disk or tape storage type.
PC2097E Error reading backup description file
Reason: This is not a restartable backup. The backup will be removed.
PC2098D Directories will not be deleted
Reason: The USNODIRDELETE environment variable was specified which suppresses directory deletes.
PC2099E Insufficient memory
Reason: There was insufficient memory allocating space for backup verification.
Action: Close applications or free memory.
Restore State Errors
PC2100E Error occurred during a restore start conv
PC2101E Error occurred during a restore send description
PC2102E Error occurred during a restore receive descript
PC2103E Error occurred during a restore receive file
PC2104I File excluded from the restore
Reason: You can use the environment variable (in usenv.dat) "USDONTLOGEXCLUDEDFILES Y" to suppress this message.
PC2105E Error occurred during a restore confirmed data
PC2106E Error occurred during a restore end conversation
PC2107E Error occurred during the completion of the rest
PC2108E Error occurred during a restore restart
PC2109D The local computer is shutting down
Reason: A restore specification requested that the local computer be shut down after a successful restore. The local computer is shutting down.
PC2110E Directory wildcard for restore spec unsupported
Reason: The FILES or DESTINATION parameter for one or more of the include (SPECTYPE 0) file specs for a restore uses a directory wildcard. This is unsupported for a restore.
Action: Do not use a directory wildcard for the FILES or DESTINATION parameter for a restore include file spec.
PC2113I USDELETEBEFORERESTORE set to 'Y'
Reason: This environment variable removes all existing information about a file (like USS file tags) after a file has been determined to be restored.
PC2114E VMWare parameter error %s %s
PC2115E VMWare specific restores not supported
Action: You must run this on a Windows Proxy server using UPSTREAM v3.5.1 or higher.
PC2116E (SAN Restore) End of Media and not keep alive (%s)
PC2117E (SAN Restore) Unexpected received type 0x%x
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2118E (SAN Restore) After tape change, expected confirm, got %d state
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2119E Unexpected %s in SAN restore of %s from %s
PC2121E Dest. specification has invalid network name
Reason: The destination file specification has a Universal Naming Convention (UNC) prefix which contains an invalid network name.
Action: Correct the destination file specification and try again.
PC2122E "/*" Restores are too dangerous
Reason: A "/*" restore is likely to destroy your system!
Action: Respecify.
PC2123I Unknown PlugIn file information
Reason: The PlugIn which backed up the received file is not the same PlugIn that is referenced by the user file specification. Make sure that the file being restored is not coming from the Duplicate File Repository on the Storage Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC2125E Unknown state during restore
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2126W Error creating restore timer
Reason: There was an error creating the restore timer. The restore should continue normally, however you will not be able to cancel the restore.
PC2127E Error allocating data space
Reason: There was insufficient memory to allocate the received data area.
Action: Free memory, or specify a smaller record size.
PC2128E Error matching file info with specification
Reason: Error matching the received file information with the user file specification. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2129W Error opening existing file
Reason: There was an error opening the existing file before the restore could be tried.
Action: Retry later.
PC2130E Received data without information
Reason: Restore data was received without an open file to write to. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2131E Unexpected received data type
Reason: During a restore a record type other than data or information was received. Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2132E Error creating directory
Action: See additional messages.
PC2136W File restore errors logged on PC
Reason: Earlier file restore errors were logged by the PC. This message is to inform the FDR/UPSTREAM server that the restore was not completely successful.
Action: See PC log entries above.
PC2137E Error restoring current parameters
Reason: There was an error restoring the current parameters after a restore operation was processed.
Action: See additional messages.
PC2138E Error saving parameters
Reason: There was an error saving the original, user- specified parameters.
Action: See additional messages.
PC2139E Missing truncated file filename
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2141E Error reallocating data for merge
Reason: A file was received which uses a larger record size than the previous file and the data space can't be allocated.
Action: Free memory and retry.
PC2142E Error in fast de-compression
Reason: Error in decompressing data that was compressed using fast compression. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2143E Dummy profile disallowed
Reason: Dummy profiles are for testing backups only; data generated can not be used for a restore.
PC2145E Exceeded maximum duplicate files
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2146E Duplicate file transferred and integrity failure
Reason: The file information for a duplicate file received had internal errors (it really should never have been a duplicate).
Action: Exclude this file from the restore.
PC2147E Error saving restart parameters
Reason: There was a file error saving the restart parameters.
Action: See additional messages.
PC2148E Error saving restart description
Reason: There was a file error saving the restart parameters.
Action: See additional messages.
PC2149E Error recovering restore parameters
Reason: During a restarted restore, there was an error recovering the original UPSTREAM parameters.
Action: See additional messages.
PC2150I Restore started
PC2151D Restore successful
PC2152D Restore completed with some failures
PC2153D Restore failed
PC2154E Restore suspended by user
PC2155I Restore restarted
PC2156D Restore failed but restartable
PC2157I File transfer receive started
PC2158D File transfer receive successful
PC2159D File transfer completed with failures
PC2160D File transfer failed
PC2161E File transfer canceled by user
PC2162E Suspend because time limit exceeded (%ld)
PC2163E Error restoring sparse file.
Reason: Set file position after skipping an empty block failed.
PC2164E Error advancing file position.
Reason: Advancing file position over skipped block while writing file sparse failed.
PC2165E No files restored
Reason: No files were found to restore. This results in a failed restore. This may be because of a bad specification or because of overwrite options.
PC2166E All files failed
Reason: All of the files that UPSTREAM tried to restore resulted in file errors and no files were successful - UPSTREAM fails the restore.
Action: See prior messages for reasons which would cause UPSTREAM to be unable to write all of the files such as an invalid destination.
PC2167E Backup not found for version: %s, profile: %s
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2168E Expected CONFIRM on wrap - state: %d
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2169E Error occurred in a CONFIRMED at the wrap
Reason: The communications error above occurred while UPSTREAM was notifying the Storage Server that it had processed all of the data in the local backup disk and was requesting that the Storage Server resume writing to the disk at the top.
Action: See messages above.
PC2170E Confirm received with incomplete pending
Reason: When performing a restore through the local backup disk, UPSTREAM received an end of restore indicator when there was pending data to be processed. Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2171E DASDOVERRIDE invalid format for restore (%s)
Reason: A DASDOVERRIDE can only be an absolute value or a subtracted value.
Action: Respecify.
PC2172E Single file system restore inquiry failed
Reason: When you request a single file system restore, UPSTREAM performs an inquiry to ascertain the file specs which need to be generated to exclude files from other file systems. This inquiry failed to find any prior backups.
PC2173I Single file system restore excluding: %s
Reason: The spec above will be excluded as it was stored in a separate file system in the original backups.
PC2174W (UNIX) Skip %s for mount point (%u!=%u)
Reason: This keeps you from restoring files to an unexpected file system. If you wish to restore the file, set the repeated parameter RESTORETODIFFFS=Y
PC2175E Restore wildcard mismatch
Reason: You specified a source and destination with incompatible wildcards.
Action: Respecify; if there's a wildcard in the source, then there must be a wildcard in the destination.
PC2180E Raw device too large
Reason: Can not restore to devices over 2gig on AIX 3.2.
PC2181E Destination is not a raw disk or partition
Reason: A character special device other than a raw disk or partition was specified for the destination.
PC2182E ioctl failed for raw device
Reason: Could not get IOCINFO for raw device.
PC2183E Open failed for raw device
Reason: Could not get IOCINFO for raw device.
PC2184E Backup is not a raw disk or partition
Reason: Can not restore a regular file to a raw disk or partition.
PC2185E Destination and backup are not the same type
Reason: The destination for the restore is a raw disk and the backup is from a raw partition, or the destination is a raw partition and the backup is from a raw disk.
PC2186E Destination not same size as backup
Reason: Can not restore a backup of a raw device to a raw device of a different size.
PC2187E Destination and backup blocksizes different
Reason: Can not restore a backup of a raw device to a raw device with a different blocksize.
PC2188E Not root user
Reason: You must be the root user to restore to a raw disk or partition.
PC2189E Raw device does not exist
Reason: A raw device must exist prior to restore.
PC2190E Restore can't restart
Reason: You attempted to restart a non-restartable restore.
Action: Restart the restore manually.
PC2191E Version not found
Reason: During personalization destination checking the requested version date was not found.
Action: Specify a valid version date.
PC2192E Drive not found
Reason: During personalization destination checking the requested drive was not found or had been remapped.
Action: Specify a valid, non-remapped drive.
PC2193E read_vtoc failed for raw device
Reason: Could not get partition info for raw device.
PC2196D File skipped - larger than MAXKFILESIZE
PC2198E Error dynamically adding a file spec
Reason: There was an error adding a "directories above" file spec to the restore specification. This is an internal FDR/UPSTREAM error.
Action: See additional messages.
PC2199E Error copying a file spec
Reason: To add the "directories above" restore specifications, there was an error copying from the existing entry.
Action: See additional messages.
Inquire Version Errors
PC2200E Error opening version information temporary file
Action: See additional messages
PC2201E Error allocating inquire version memory
Reason: There was not enough memory to allocate space to inquire versions.
Action: Free memory
PC2202E Error building start conversation record
Reason: There was an error building the start conversation record to send to the remote.
Action: See additional messages.
PC2203E Error sending start conversation for inq ver
Reason: There was an error sending the start conversation record for an inquire versions request.
Action: See additional messages.
PC2204E Error sending inquire versions record
Action: See additional messages.
PC2205E Error receiving inquire versions information
Reason: There was an error receiving the non-repeating backup description from the remote.
Action: See additional messages.
PC2206E Error sending inquire versions confirmed
Reason: There was an error acknowledging receipt of all the version information.
Action: See additional messages.
PC2207E Error ending the inquire versions conversation
Action: See additional messages.
PC2208E Error deleting inquire versions temp file
Action: See additional messages.
PC2209E Error ending the inquire versions conversation
Action: See additional messages.
PC2210E Error writing to inquire versions temp file
Reason: There was an error writing to the inquire versions temporary file.
Action: See additional messages.
PC2211E Error receiving inquire versions repeated info
Reason: There was an error receiving the repeated backup description information.
Action: See additional messages.
PC2212E Error writing inquire version repeated info
Reason: There was an error writing the repeated backup description information to the temporary file.
Action: See additional messages.
PC2213E Error reading temporary inquire versions file
Reason: There was an error reading the inquire versions temporary file for non-repeated backup description information.
Action: See additional messages.
PC2214E Error reading temporary inquire versions file
Reason: There was an error reading the inquire versions temporary file non-repeated information when searching for repeated information.
Action: See additional messages.
PC2215E Error reading temporary inquire versions file
Reason: There was an error reading the inquire versions temporary file repeated information.
Action: See additional messages.
PC2216D Expected more file descriptions
Reason: There was an unexpected end of data or non- repeated structure when receiving version information.
Action: Contact FDR/UPSTREAM Tech Support.
PC2217E Can't delete inquire versions file
Reason: There was an error deleting the inquire versions information file (USVER.BKP).
Action: See additional messages.
PC2218E Error receiving inquire versions profile name
Reason: There was an error receiving the profile name for the profile management information request.
Action: See additional messages.
PC2219D No versions stored for this profile
Reason: Specify a different backup profile.
PC2220E Unexpected EOF reading version file
Reason: Error reading non-repeated section. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2221E Unexpected EOF reading version file
Reason: Error reading repeated section. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2222E Unexpected EOF reading version file
Reason: Error reading non-repeated section to read repeated section. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2223E Bad translation tables
Reason: The files to be processed require UTF-8 capable, one-to-one translation tables and your translation tables are not one-to-one.
Action: Specify ANS2ATOE.TAB and ANS2ETOA.TAB translation tables.
PC2224I UTF-8 enabled
Reason: UTF-8 unicode translation was enabled in a prior backup so it has been enabled now.
PC2225I UTF-8 disabled
Reason: UTF-8 unicode translation was disabled in a prior backup so it has been disabled now.
PC2226E UTF-8 not supported
Reason: A UTF-8 backup was received and it is not supported by this version of UPSTREAM.
PC2227I Version inquiry succeeded
PC2228E Version inquiry failed
Restore Errors (continued)
PC2250E (UNIX) Error restoring APF extended attribute
Action: If the errno is 139 (Operation not permitted), the user does not have read access to the BPX.FILEATTR.APF FACILITY class. If errno is not 139, Contact FDR/UPSTREAM Tech Support.
PC2251E (UNIX) Error restoring PROGCTL extended attribute
Action: If the errno is 139 (Operation not permitted), the user does not have read access to the BPX.FILEATTR.PROGCTL FACILITY class. If errno is not 139, Contact FDR/UPSTREAM Tech Support.
PC2252D (UNIX) USS external link
Reason: UNIX Systems Services external links are skipped on non-UNIX Systems Services operating systems.
PC2255E Zero length Tru64 UNIX partition
Reason: The destination raw device for restore refers to a zero length or unallocated disk partition.
Action: Specify or define a valid partition.
PC2256E Invalid partition on unlabeled disk
Reason: The destination raw device for restore refers to a partition other than c on an unlabeled disk.
Action: Specify the c partition or label the disk.
PC2258E Volume mount point directory not restored
Reason: The directory on the backup is a volume mount point directory and you have specified with the RESTOREMOUNTPOINTS parameter that all volume mount point directory restores should be failed.
PC2259E Target directory has different volume mounted
Reason: The target directory is a volume mount point directory for a volume that is different than the volume that was mounted on the volume mount point directory on the backup.
PC2260E Volume mount point not reestablished
Reason: The directory on the backup is a volume mount point directory, the target directory exists and is not a volume mount point directory and you have specified with the RESTOREMOUNTPOINTS parameter that volume mount point directory restores should be failed if the target directory is not a volume mount point directory.
PC2261E Error creating a volume mount point directory
Reason: The directory on the backup is a volume mount point directory, an error occurred while creating the target directory and you have specified with the RESTOREMOUNTPOINTS parameter that volume mount point directory restores should be failed if the target directory cannot be created.
PC2262E Volume mount point directory not created
Reason: The directory on the backup is a volume mount point directory, the target directory does not exist and you have specified with the RESTOREMOUNTPOINTS parameter that mount point directory restores should be failed if the target directory is not already a volume mount point.
PC2263E Directory not restored to volume mount point
Reason: The directory on the backup is not a volume mount point directory, the target directory is a volume mount point directory and you have specified with the RESTOREMOUNTPOINTS parameter that the mount point directory restores should be failed outright or be failed if the volume mount point does not exist or cannot be created.
PC2264E Error creating a volume mount point
Reason: The directory on the backup is a volume mount point directory, an error occurred while creating the volume mount point for the target directory, failed and you have specified with the RESTOREMOUNTPOINTS parameter that volume mount point directory restores should be failed only if the volume mount point cannot be created.
PC2266E Can't restore volume mount point on non-Win2K system
Reason: The directory on the backup is a volume mount point directory, the creation of the volume mount point for the target directory cannot be performed because this is a non-Windows 2000 system and you have specified with the RESTOREMOUNTPOINTS parameter that mount point directory restores should be failed if the volume point cannot be created.
PC2267I Skipping files for failed mount point directory
Reason: The restore of a directory has failed due to a condition involving volume mount points. The restore of all of the files and subdirectories in that directory and its subdirectories will be skipped.
PC2268I Volume replaced on mount point directory
Reason: The directory on the backup is a volume mount point directory for the volume shown below. During the restore the target directory was found to be a mount point directory for a different volume. This is not an error since you specified with the RESTOREMOUNTPOINTS parameter that mount point directory restores should continue even if the target directory has a different volume mounted on it.
PC2269I Volume removed from mount point directory
Reason: The directory on the backup is a volume mount point directory for the volume shown below. During the restore the target directory was found to not have a volume mounted on it. This is not an error since you specified with the RESTOREMOUNTPOINTS parameter that mount point directory restores should continue even if the target directory no longer has a volume mounted on it.
PC2270I Volume mounted on mount point directory
Reason: The directory on the backup is not volume mount point directory. During the restore the target directory was found to be a mount point for a volume. This is not an error since you specified with the RESTOREMOUNTPOINTS parameter that non-mount point directory restores should continue even if the target directory has a volume mounted on it.
PC2271E A UID for the user name is not defined
Reason: One or more files restored with the UID of the current user.
Action: Add a definition for the user name using the appropriate utility for your system.
PC2272E A GID for the group name is not defined
Reason: One or more files restored with the current GID.
Action: Add a definition for the group name using the appropriate utility for your system.
PC2273E A UID for the user name is not defined
Reason: One or more files restored with the UID of the file at the time of backup.
Action: Add a definition for the user name using the appropriate utility for your system.
PC2274E A GID for the group name is not defined
Reason: One or more files restored with the GID of the file at the time of backup.
Action: Add a definition for the group name using the appropriate utility for your system.
PC2275E Broken connection
Reason: During the restore the connection was lost to the Storage Server.
Action: See Storage Server log.
PC2276E Unexpected conversation state: %d
Action: Contact FDR/UPSTREAM Tech Support.
PC2277I Device file skipped
Reason: Device files are only restored when performing a disaster recovery restore.
PC2278E (Restore) Invalid intermixing of file specs
Reason: You have one or more full system file specs specified with one or more non-full system or exclude file specs or one of your full system file specs specifies a destination. Such a combination is not supported.
Action: Your include file specs should be of the full system file spec variety only and not specify a destination if you want to restore the full system state of one or more computers.
PC2281E (Restore) Only one ASR restore file spec is allowed
Reason: An ASR restore with more than one file spec has been specified. This is not supported.
Action: Specify only one file spec for an ASR restore.
PC2282E (Restore) An error occurred on a version inquiry
Reason: An error occurred while performing a version inquiry operation to validate the specified backup version from which to restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2283E (Restore) An error occurred reading specified version
Reason: An internal UPSTREAM error occurred while reading the version information for the specified backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC2284E (Restore) The specified version cannot be found
Reason: The backup version specified by either the VERSIONDATE or LATESTVERSION parameters does not exist.
Action: Specify a different backup version from which to perform the restore.
PC2285E (Restore) Can't save original parameters
Reason: An internal UPSTREAM error occurred which prevents the saving of your original parameters before the creation of one or more dynamic full system file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC2286E (Restore) Insufficient memory for computer names
Reason: While attempting to allocate memory for an array of computer names, there was insufficient memory.
Action: Close applications or free memory.
PC2287E (Restore) An error occurred reading a file spec
Reason: An internal UPSTREAM error occurred while reading the file spec information for the specified backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC2288E (Restore) Can't restore original parameters
Reason: An internal UPSTREAM error occurred which prevents the restoration of your original parameters after the creation of one or more dynamic full system file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC2289E (Restore) Can't create a full system file spec
Reason: An internal UPSTREAM error occurred which prevents the addition of one or more dynamic file specs needed to restore a complete computer system.
Action: Contact FDR/UPSTREAM Tech Support.
PC2290E (Restore) Can't modify a full system file spec
Reason: An internal UPSTREAM error occurred which prevents the modification of one or more dynamic file specs needed to restore a complete computer system.
Action: Contact FDR/UPSTREAM Tech Support.
PC2291E (Restore) A required PlugIn is not loaded
Reason: You are attempting to restore a complete computer system which requires the use of a PlugIn which was not loaded. The name of the required PlugIn follows:
Action: Determine why the PlugIn could not be loaded.
PC2292E (Restore) No full system restores were performed
Reason: No actual restores were performed for a full system restore because none of the computer names recorded with the file specifications from the backup matched the source computer name as defined by the FILES parameter.
Action: Check the setting of the FILES parameter and retry the restore.
PC2293I (Restore: USS) File tag couldn't be written
PC2294I (Restore: USS) File format couldn't be written
Inquire Files Errors
PC2300E Error starting inquire files conversation
Action: See additional messages.
PC2301E Error sending start conversation for inquire file
Action: See additional messages.
PC2302E Error sending inquire files request
Action: See additional messages.
PC2303E Error receiving inquire files information
Action: See additional messages.
PC2304N Receiving backed-up file information
Reason: A remote inquire files process is in progress. You can press CANCEL to abort process. This message will go away if there is an error or the information has been completely received.
PC2305E Can't create inquire files temp file
Reason: There was an error creating the inquire files temporary file. Inquire files will not function until this is fixed.
Action: See additional messages.
PC2306E Can't write to inquire files temp file
Reason: There was an error writing to the inquire files temporary file. Inquire files will not function until this is fixed.
Action: See additional messages.
PC2307E Can't reopen inquire files temp file
Reason: There was an error reopening the inquire files temporary file to fill the list box. Inquire files will not function until this is fixed.
Action: See additional messages.
PC2308E Can't read inquire files temp file
Reason: There was an error reading the file information from the inquire files temporary file. Inquire files will not function until this is fixed.
Action: See additional messages.
PC2309E Unexpected end of file - inquire files temp
Reason: End of file was reached on the inquire files temporary file. This is a system error and inquire files will not function until this is fixed.
Action: Contact FDR/UPSTREAM Tech Support.
PC2310E Can't allocate data to inquire files
Reason: There was an error allocating data space to perform the inquire files function.
Action: Close other programs or free disk space.
PC2313E User requested cancel of inquire files
PC2314E Error sending delete file request
Action: See communications return codes.
PC2315E Error confirming delete file request
Action: Additional messages.
PC2316E Internal date format error
Action: Contact FDR/UPSTREAM Tech Support.
USVSS Errors (2350 - 2399)
PC2350E (USVSS) Can't find single file information
Reason: While attempting to get the file information for a single file (by reference), an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2351E (USVSS) Can't find files
Reason: While attempting to get the file information for a set of files on a snapshotted NTFS volume, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2352E (USVSS) Can't select files
Reason: While attempting to include or exclude a set of files for a backup, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2353E (USVSS) Can't set files changed
Reason: While attempting to mark a set of files as changed since the last backup, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2354E (USVSS) Can't open snapshotted NTFS volume
Reason: While attemting to open a snapshotted NTFS volume for raw volume processing, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2355E (USVSS) Can't open backup criteria
Reason: While attempting to create a set of backup criteria for the backup, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2356E (USVSS) Can't initialize raw volume processing
Reason: While attempting to initialize the raw volume processing subsystem, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2357E (USVSS) Can't create raw volume processing stack
Reason: While attempting to further initialize the raw volume processing subsystem, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2358E (USVSS) Can't load a LVB file system driver
Reason: While attempting to load a LVB file system driver, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2359E (USVSS) Can't start SelectFilesThread
Reason: An error occurred while attempting to start SelectFilesThread for the specified volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC2360E (USVSS) Can't allocate a file information array
Reason: While attempting to allocate memory for the file information array, there was insufficient memory.
Action: Close applications or free memory.
PC2361E (USVSS) No file information
Reason: While handling a GetFileInformation request from the Client, no file information was found.
Action: Contact FDR/UPSTREAM Tech Support.
PC2362E (USVSS) Can't search EFI system volume
Reason: While attempting to identify the EFI system volume files, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2363E (USVSS) Can't get EFI system volume files
Reason: While attempting to identify the EFI system volume files, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2364E (USVSS) Can't allocate a EFI system volume file entry
Reason: While attempting to allocate memory for an EFI system volume file entry, there was insufficient memory.
Action: Close applications or free memory.
PC2365E (USVSS) Can't add VSSFileInfo
Reason: The number of VSSFileInfo records to be added to the array is larger than the number allocated. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC2366W (USVSS) Unsupported VSS writer
Reason: During the evaluation of the file specifications for a backup, a VSS writer was encountered that is not supported by the UPSTREAM Client for a full and/or incremental backup. An alternate backup method may need to be used for the VSS components and files for this VSS writer. Therefore, this unsupported VSS writer is being ignored for this backup and the rest of the backup will continue. The data for this unsupported VSS writer will not be backed up. The name and ID of this unsupported VSS writer are at the end of this message.
Action: Contact FDR/UPSTREAM Tech Support to determine if an alternate method for backing up this VSS writer exists.
PC2367W (USVSS) Unsupported system state VSS writer
Reason: During the evaluation of the file specifications for a backup, a system state VSS writer was encountered that is not supported by the UPSTREAM Client for a full and/or incremental backup. An alternate backup method may need to be used for the VSS components and files for this system state VSS writer. Therefore, this unsupported system state VSS writer is being ignored for this backup and the rest of the backup will continue. The data for this unsupported system state VSS writer will not be backed up. The name and ID of this unsupported system state VSS writer are at the end of this message.
Action: Contact FDR/UPSTREAM Tech Support to determine if an alternate method for backing up this VSS writer exists.
PC2368W (USVSS) Bad VSS component status for a VSS operation
Reason: The specified VSS component returned a bad status for a VSS operation. The failure message from the VSS component is at the end of this message.
Action: Check the Application Event Log for further information from the specified VSS writer that owns the VSS Component or from VSS inself.
PC2369W (USVSS) Excluding VSS component
Reason: The following VSS component will be excluded from the next backup attempt.
PC2370W (USVSS) Bad VSS writer status for a VSS operation
Reason: The specified VSS writer returned a bad status for a VSS operation.
Action: Check the Application Event Log for further information from the specified VSS writer or from VSS itself.
PC2371W (USVSS) Excluding VSS writer
Reason: The following VSS writer will be excluded from the next backup attempt. All of the VSS components of this VSS writer and their files will also be excluded.
PC2395E (CustApps) Can't open the hivelist key
Reason: During the final steps of restoring the registry, an error occurred while attempting to open the SYSTEM\CurrentControlSet\Control\hivelist key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2396E (CustApps) Can't enumerate the hivelist key values
Reason: During the final steps of restoring the registry, an error occurred while attempting to enumerate the values of the SYSTEM\CurrentControlSet\Control\hivelist key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2397E (CustApps) Can't get hive key name for hive file name
Reason: During the final steps of restoring the registry, an error occurred while attempting to find the registry hive key name for the associated hive file name.
Action: Contact FDR/UPSTREAM Tech Support.
PC2398E (CustApps) Can't rename real hive file
Reason: During the final steps of restoring the registry, an error occurred while attempting to rename a registry hive file name to a replacement hive file name.
Action: Contact FDR/UPSTREAM Tech Support.
PC2399E (CustApps) Can't rename restored hive file
Reason: During the final steps of restoring the registry, an error occurred while attempting to rename a restored hive file name to its real registry hive file name.
Action: Contact FDR/UPSTREAM Tech Support.
Help System Errors
PC2400E Error opening help file
Action: See additional messages.
PC2401E Error reading help file
Action: See additional messages.
MSSQLAgt Errors
PC2425E (MSSQLAgt) Can't open virtual device
Reason: An error occurred while attempting to open a virtual device used in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2426E (MSSQLAgt) Can't create a named pipe
Reason: An error occurred while attempting to create a named pipe for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2427E (MSSQLAgt) Can't connect to a named pipe
Reason: An error occurred while attempting to connect to the named pipe that was created for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2428E (MSSQLAgt) Named pipe connection timed out
Reason: The FDR/UPSTREAM Client did not open the named pipe used in a SQL Server database BACKUP or RESTORE operation, within the timeout period.
Action: Contact FDR/UPSTREAM Tech Support.
PC2429E (MSSQLAgt) Can't read data from named pipe
Reason: An error occurred while attempting to read data from the named pipe created for use in a SQL Server RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2430E (MSSQLAgt) Can't write data to named pipe
Reason: An error occurred while attempting to write data to the named pipe created for use in a SQL Server BACKUP operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2431E (MSSQLAgt) Can't flush data to named pipe
Reason: An error occurred while attempting to flush data to the named pipe created for use in a SQL Server BACKUP operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2432E (MSSQLAgt) Can't complete device command
Reason: An error occurred while completing a virtual device command in the process of a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2433E (MSSQLAgt) Can't get device command
Reason: An error occurred while getting a virtual device command in the process of a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2434E (MSSQLAgt) Can't disconnect named pipe
Reason: An error occurred while attempting to disconnect from the named pipe that was created for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2435E (MSSQLAgt) Can't impersonate named pipe client
Reason: An error occurred while attempting to get the security credentials of the FDR/UPSTREAM Client from a named pipe created for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2436E (MSSQLAgt) Can't create server interface
Reason: An error occurred while attempting to create a ISQLDMOServer interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2437E (MSSQLAgt) Can't set login timeout
Reason: An error occurred while attempting to set the login timeout for a SQL Server connection.
Action: Contact FDR/UPSTREAM Tech Support.
PC2438E (MSSQLAgt) Can't set login type
Reason: An error occurred while attempting to set the login type for a SQL Server connection.
Action: Contact FDR/UPSTREAM Tech Support.
PC2439E (MSSQLAgt) Can't connect to server
Reason: An error occurred while attempting to connect to the specified server. If you have specified a SQL login and password, verify that these are correct.
Action: Contact FDR/UPSTREAM Tech Support.
PC2440E (MSSQLAgt) Can't execute command
Reason: An error occurred while attempting to execute a SQL command using a connection to the specified server. If this is an incremental backup, this error may be the result of the database being configured with a Recovery Model set to Simple. If this is the case, change the Recovery Model for this database to Full.
Action: Contact FDR/UPSTREAM Tech Support.
PC2441E (MSSQLAgt) Can't create device set interface
Reason: An error occurred while attempting to create a IClientDeviceSet interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2442E (MSSQLAgt) Can't create advanced device set interface
Reason: An error occurred while attempting to create a IClientDeviceSet2 interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2443E (MSSQLAgt) Can't create device set
Reason: An error occurred while attempting to create a virtual device used in a BACKUP or RESTORE operation.
Action: Examine the SQL Server ERRORLOG file for more detailed information about this error and then contact FDR/UPSTREAM Tech Support.
PC2444E (MSSQLAgt) Can't create command thread
Reason: An error occurred while attempting to create the command thread for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2445E (MSSQLAgt) Can't get configuration
Reason: An error occurred while attempting to get the configuration from a virtual device set used in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2446E (MSSQLAgt) Can't create backup/restore thread
Reason: An error occurred while attempting to create a backup restore thread for use in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2447E (MSSQLAgt) Can't wait for command thread
Reason: An error occurred while waiting for the command thread to terminate while processing a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2448E (MSSQLAgt) Can't get command thread exit code
Reason: An error occurred while attempting to get the exit code from the command thread used for processing a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2449E (MSSQLAgt) Can't wait for backup/restore threads
Reason: An error occurred while waiting for the backup/restore threads to terminate while processing a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2451E (MSSQLAgt) Missing database name
Reason: The FDR/UPSTREAM Client has not specified the name of a database to be used in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2452E (MSSQLAgt) Invalid number of backup/restore threads
Reason: The FDR/UPSTREAM Client has specified an invalid number of backup/restore threads to be used in a SQL Server database BACKUP or RESTORE operation.
Action: Contact FDR/UPSTREAM Tech Support.
PC2453E (MSSQLAgt) Can't create IDBInitialize interface
Reason: An error occurred while attempting to create an IDBInitialize interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2454E (MSSQLAgt) Can't get IDBProperties interface
Reason: An error occurred while attempting to get an IDBProperties interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2455E (MSSQLAgt) Can't set connection properties
Reason: An error occurred while attempting to set the properties for opening a SQL connection.
Action: Contact FDR/UPSTREAM Tech Support.
PC2456E (MSSQLAgt) Can't get IDBCreateSession interface
Reason: An error occurred while attempting to get an IDBCreateSession interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2457E (MSSQLAgt) Can't create session
Reason: An error occurred while attempting to create a session for an open SQL connection
Action: Contact FDR/UPSTREAM Tech Support.
PC2458E (MSSQLAgt) Can't create IDBCreateCommand interface
Reason: An error occurred while attempting to create an IDBCreateCommand interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2459E (MSSQLAgt) Can't create command
Reason: An error occurred while attempting to create a BACKUP or RESTORE command to be executed.
Action: Contact FDR/UPSTREAM Tech Support.
PC2460E (MSSQLAgt) Can't get ICommandText interface
Reason: An error occurred while attempting to get an ICommandText interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2461E (MSSQLAgt) Can't set command text
Reason: An error occurred while attempting to set the BACKUP or RESTORE command text.
Action: Contact FDR/UPSTREAM Tech Support.
PC2462E (MSSQLAgt) Can't get command result
Reason: An error occurred while attempting to get a result from a BACKUP or RESTORE command.
Action: Contact FDR/UPSTREAM Tech Support.
PC2463E (MSSQLAgt) Errors in command
Reason: The specified SQL BACKUP or RESTORE command encountered errors.
Action: See following PC10301I messages.
CustApps Errors
PC2725E (USVSS) Can't open active Services key
Reason: An error occurred while attempting to open the Services key from the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2726E (USVSS) Can't enumerate active Services key
Reason: An error occurred while attempting to enumerate the subkeys of the Services key from the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2727E (USVSS) Can't open active service key
Reason: An error occurred while attempting to open a service key (one of the subkeys of the Services key) from the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2728E (USVSS) Can't get Start value for active service
Reason: An error occurred while attempting to query the Start value of a service key (one of the subkeys of the Services key) from the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2729E (USVSS) Can't open restored service key
Reason: An error occurred while attempting to open a service key (one of the subkeys of the Services key) from the restored registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2730E (USVSS) Can't get Start value for restored service
Reason: An error occurred while attempting to query the Start value of a service key (one of the subkeys of the Services key) from the restored registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2731E (USVSS) Can't set Start value for restored service
Reason: An error occurred while attempting to set the Start value of a service key (one of the subkeys of the Services key) from the restored registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2732E (USVSS) Can't create temporary SYSTEM key
Reason: An error occurred while attempting to create the HKEY_LOCAL_MACHINE\RestoredSYSTEM temporary key in the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2733E (USVSS) Temporary SYSTEM key already exists
Reason: While attempting to create the HKEY_LOCAL_MACHINE\RestoredSYSTEM temporary key in the active registry, it was found that this key already exists. This is most likely left over from a prior failed restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2735E (USVSS) Can't open temporary SYSTEM key
Reason: An error occurred while attempting to open the HKEY_LOCAL_MACHINE\RestoredSYSTEM temporary key in the active registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2736E (USVSS) Can't get restored Select value
Reason: An error occurred while attempting to get the Select value from the HKEY_LOCAL_MACHINE\RestoredSYSTEM temporary key in the active registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2737E (USVSS) Can't open active AsrKeysNotToRestore key
Reason: An error occurred while attempting to open the AsrKeysNotToRestore key from the active registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2738E (USVSS) Can't open active KeysNotToRestore key
Reason: An error occurred while attempting to open the KeysNotToRestore key from the active registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2739E (USVSS) Can't open restored KeysNotToRestore key
Reason: An error occurred while attempting to open the KeysNotToRestore key from the restored registry.
Action: Contact FDR/UPSTREAM Tech Support. An error occurred while attempting to enumerate the subkeys of the Services key from the active registry during a restore.
PC2740E (USVSS) Can't enumerate KeysNotToRestore values
Reason: An error occurred while attempting to enumerate the values from either the active AsrKeysNotToRestore key, the active KeysNotToRestore key or the restored KeysNotToRestore key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2741E (USVSS) Can't query active AsrKeysNotToRestore value
Reason: An error occurred while attempting to query a value of the AsrKeysNotToRestore key from the active registry in order to check for duplicate values.
Action: Contact FDR/UPSTREAM Tech Support.
PC2742E (USVSS) Can't query active KeysNotToRestore value
Reason: An error occurred while attempting to query a value of the KeysNotToRestore key from the active registry in order to check for duplicate values.
Action: Contact FDR/UPSTREAM Tech Support.
PC2743E (USVSS) Can't merge Services key subkey Start values
Reason: An error occurred while attempting to merge the Start value from an active Services key subkey to its restored Services key subkey counterpart.
Action: Contact FDR/UPSTREAM Tech Support.
PC2744E (USVSS) Can't open active key
Reason: An error occurred while attempting to open a key in the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2745E (USVSS) Can't get active key value length
Reason: An error occurred while attempting to determine the length of a value for a key in the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2746E (USVSS) Can't allocate active key value data
Reason: While attempting to allocate memory for the data of an active key value, there was insufficient memory.
Action: Close applications or free memory.
PC2747E (USVSS) Can't get active key value data
Reason: An error occurred while attempting to get the data of a value for a key in the active registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2748E (USVSS) Can't save active key to temporary file
Reason: An error occurred while attempting to save a key in the active registry to a temporary file in the process of copying it to the restored registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2749E (USVSS) Can't open restored key
Reason: An error occurred while attempting to open a key in the restored registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2750E (USVSS) Can't create restored key
Reason: An error occurred while attempting to create a key in the restored registry during a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC2751E (USVSS) Key does not exist in the restored registry
Reason: A value needs to be copied from the active registry to the restored registry, but the key in the restored registry to which the value is to be copied does not exist.
Action: Contact FDR/UPSTREAM Tech Support.
PC2752E (USVSS) Can't delete restored key value
Reason: An error occurred while attempting to delete a value which does not exist for a key in the active registry from its counterpart key in the restored registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2753E (USVSS) Can't set restored key value
Reason: An error occurred while attempting to set a value for a key in the restored registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2754E (USVSS) Can't delete restored key
Reason: An error occurred while attempting to delete a key in the restored registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2755E (USVSS) Can't restore restored key from temporary file
Reason: An error occurred while attempting to restore a key in the restored registry from a temporary file in the process of copying it from the active registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2756E (USVSS) Can't save temporary SYSTEM key
Reason: An error occurred while attempting to save the HKEY_LOCAL_MACHINE\RestoredSYSTEM temporary key in the active registry to the restored SYSTEM registry hive file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2757E (USVSS) System not in Directory Services Repair Mode
Reason: You are attempting to restore the Active Directory component, but the system is not booted into Directory Services Repair (DSR) or Automatic System Recovery (ASR) mode.
Action: Restart the restore after rebooting the system into DSR or ASR mode.
PC2758E (USVSS) Can't search for COM+ Reg DB files
Reason: An error occurred while attempting to search for the COM+ Registration Database file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2759E (USVSS) Too many COM+ Reg DB files
Reason: While searching for the COM+ Registration Database file, too many were found.
Action: Contact FDR/UPSTREAM Tech Support.
PC2760E (USVSS) Can't find COM+ Reg DB file
Reason: While searching for the COM+ Registration Database file, one was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC2761E (USVSS) Can't create USW2KAgt.cmd file
Reason: An error occurred while creating a USW2KAgt.cmd file in order to finish the restore of the COM+ Registration Database file or the Cluster database.
Action: Contact FDR/UPSTREAM Tech Support.
PC2762E (USVSS) Can't load CATSRVUT.DLL
Reason: An error occurred while attempting to load CATSRVUT.DLL in the process of restoring the COM+ Registration Database file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2763E (USVSS) Can't load RegDBRestore API function
Reason: An error occurred while attempting to get the address of the RegDBRestore API function in order to finish the restore of the COM+ Registration Database file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2764E (USVSS) Can't restore COM+ Reg DB file
Reason: An error occurred while attempting to restore the COM+ Registration Database file
Action: Contact FDR/UPSTREAM Tech Support.
PC2765E (USVSS) COM+ Reg DB component restore not successful
Reason: The restore of the COM+ Registration Database component was unsuccessful.
Action: Contact FDR/UPSTREAM Tech Support.
PC2766E (USVSS) Can't allocate FRS Writer data
Reason: While attempting to allocate memory for the FRS writer data, there was insufficient memory.
Action: Close applications or free memory.
PC2767E (USVSS) Can't load NtFrsApi.DLL
Reason: An error occurred while attempting to load NtFrsApi.DLL in the process of restoring the FRS component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2768E (USVSS) Can't load NtFrsApiInitializeBackupRestore API function
Reason: An error occurred while attempting to get the address of the NtFrsApiInitializeBackupRestore API function in order to finish the restore of the FRS component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2769E (USVSS) Can't load NtFrsApiDestroyBackupRestore API function
Reason: An error occurred while attempting to get the address of the NtFrsApiDestroyBackupRestore API function in order to finish the restore of the FRS component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2770E (USVSS) Can't initialize FRS backup/restore API
Reason: An error occurred while initializing the FRS backup/restore API in order to finish the restore of the FRS component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2771D (USVSS) FRS requires a reboot
Reason: One or more FRS (File Replication System) replicas have been restored. A system reboot is required to complete the restore process. The FRS service on one or more FRS partners may also need to be restarted.
Action: Contact FDR/UPSTREAM Tech Support.
PC2772E (USVSS) Can't terminate FRS backup/restore API
Reason: An error occurred while terminating the FRS backup/restore API in order to finish the restore of the FRS component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2773E (USVSS) FRS component restore not successful
Reason: The restore of one of the FRS components was unsuccessful.
Action: Contact FDR/UPSTREAM Tech Support.
PC2774E (USVSS) Can't search for Registry files to count them
Reason: An error occurred while attempting to search for the Registry files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2775E (USVSS) No registry files restored
Reason: While searching for the Registry files, none were found.
Action: Contact FDR/UPSTREAM Tech Support.
PC2776E (USVSS) Can't allocate Registry file spec info array
Reason: While attempting to allocate memory for the Registry file spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC2777E (USVSS) Can't search for Registry files to save them
Reason: An error occurred while attempting to search for the Registry files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2778E (USVSS) Can't preserve SYSTEM hive keys
Reason: An error occurred while attempting to copy the registry keys that are not to be restored from the active registry SYSTEM hive to the restored registry SYSTEM hive.
Action: Contact FDR/UPSTREAM Tech Support.
PC2779E (USVSS) Can't replace registry hive
Reason: An error occurred while attempting to replace an active registry hive (key) with its counterpart from a restored registry hive file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2780E (USVSS) Registry component restore not successful
Reason: The restore of the Registry component was unsuccessful.
Action: Contact FDR/UPSTREAM Tech Support.
PC2781E (USVSS) Can't open Session Manaager key
Reason: An error occurred while attempting to open the Session Manager key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2782E (USVSS) Can't set AllowProtectedRenames value
Reason: An error occurred while attempting to set the AllowProtectedRenames value in order to finish the restore of the System Protected Files component files.
Action: Contact FDR/UPSTREAM Tech Support.
PC2783E (USVSS) System Protected Files component restore not successful
Reason: The restore of the System Protected Files component was unsuccessful.
Action: Contact FDR/UPSTREAM Tech Support.
PC2784E (USVSS) Can't load CLUSAPI.dll
Reason: An error occurred while attempting to load CLUSAPI.dll.
Action: Contact FDR/UPSTREAM Tech Support.
PC2785E (USVSS) Can't load RestoreClusterDatabase function
Reason: An error occurred while attempting to load the function address of the RestoreClusterDatabase API function.
Action: Contact FDR/UPSTREAM Tech Support.
PC2786W (USVSS) Non-NTFS volume excluded
Reason: A volume with a file system other than NTFS was selected for backup. This is not supported due to the lack of full support for non-NTFS volumes by VSS. This volume is being excluded from the backup.
Action: If you want to backup this non-NTFS volume, add a non-WinSS PlugIn file spec to backup this non-NTFS volume using the legacy (non-snapshot) method.
PC2787E (USVSS) Can't restore cluster database
Reason: An error occurred while attempting to restore the cluster database.
Action: Contact FDR/UPSTREAM Tech Support.
PC2788E (USVSS) Can't start GetVolumeMFTInfoThread
Reason: An error occurred while attempting to start GetVolumeMFTInfoThread for the specified volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC2789W (USVSS) DFS component excluded
Reason: DFS components may only be restored authoritatively when restored without the SYSVOL component. Since the restore is not authoritative and the SYSVOL component is not also being restored, the following DFS Component was excluded.
Action: If you want to restore this DFS component, make the restore an authoritative restore or restore the SYSVOL component as well. To restore this DFS component non-authoritatively, without the SYSVOL, delete the DFS replica, delete all of the DFS replica files and then recreate the DFS replica. This will cause DFS to restore all of the files non-authoritatively.
PC2790E (USVSS) No components included
Reason: After excluding all of the DFS components (see message #PC2989W) there were no components included in the restore.
Action: See additional messages.
PC2791E (USVSS) Can't set UPSTREAM Agent version attribute
Reason: An error occurred while attempting to set the UPSTREAM Agent version attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2792E (USVSS) Can't set UPSTREAM Client version attribute
Reason: An error occurred while attempting to set the UPSTREAM Client version attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2793E (USVSS) Can't set OS version attribute
Reason: An error occurred while attempting to set the operating system version attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2794E (USVSS) Can't set UPSTREAM Agent version value
Reason: An error occurred while attempting to set the UPSTREAM Agent version value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2795E (USVSS) Can't set UPSTREAM Client version value
Reason: An error occurred while attempting to set the UPSTREAM Client version value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2796E (USVSS) Can't set OS version value
Reason: An error occurred while attempting to set the operating system version value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2797E (USVSS) Can't get OSVersion attribute
Reason: An error occurred while attempting to get the OSVersion attribute from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2798E (USVSS) The computer, OS or processor has changed
Reason: The computer name, operating system version and/or the processor architecture has changed since the last backup. This is not allowed for an incremental backup.
Action: Perform a full merge or first time full backup.
PC2799E (USVSS) Can't set processor architecture attribute
Reason: An error occurred while attempting to set the processor architecture attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
Performance Test Errors
PC2800E VSAM I/O test error
Reason: There was an error starting or receiving the results of a VSAM I/O test.
Action: See additional messages.
PC2801D Performance Tests Results:
PC2802E File I/O test error
Reason: There was a file I/O test error and the results shown in the statistics will be wrong.
Action: See additional messages.
PC2803E Communications volume test error
Reason: There was an error in the communications test and the results shown in the statistics will be wrong.
Action: See additional messages.
PC2804E Error saving performance tests values
Action: See additional messages.
PC2805E Performance test disallowed for a file spec
Reason: The following file spec was specified for a backup performance test. This is not allowed due to processing at the end of the backup which may cause data loss.
Action: Change your performance test file specs.
PC2806E Storage server send error, expected %u records, got %u
USVSS Errors
PC2825E (USVSS) Can't find a MFTFileName entry
Reason: While constructing an array of hard linked file names and the list of changed file names for the specified volume, an error occurred which prevents the finding of the specified MFT file name entry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2826E (USVSS) Can't get cluster quorum resource
Reason: While attempting to get the resource for the cluster quorum an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2827E (USVSS) Can't get SharedVolumesRoot property
Reason: While attempting to get the SharedVolumesRoot property for a cluster an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2828E (USVSS) Can't open cluster enumeration
Reason: While attempting to start a cluster enumeration an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2829E (USVSS) Can't enumerate the cluster
Reason: While attempting to enumerate a cluster an error occurred
Action: Contact FDR/UPSTREAM Tech Support.
PC2830E (USVSS) Can't open a cluster group
Reason: While attempting to open a cluster group an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2831E (USVSS) Can't open a cluster group enumeration
Reason: While attempting to start a cluster group enumeration an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2832E (USVSS) Can't enumerate a cluster group
Reason: While attempting to enumerate a cluster group an error occurred
Action: Contact FDR/UPSTREAM Tech Support.
PC2833E (USVSS) Can't open a cluster resource
Reason: While attempting to open a cluster resource an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2834E (USVSS) Can't get Type property
Reason: While attempting to get the Type property of a cluster resource an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2835E (USVSS) Can't allocate machine information
Reason: While attempting to allocate memory for an array of machines, there was insufficient memory.
Action: Close applications or free memory.
PC2836E (USVSS) Can't allocate computer name information
Reason: While attempting to allocate memory for an array of computer names, there was insufficient memory.
Action: Close applications or free memory.
PC2837E (USVSS) Can't get cluster resource ID
Reason: While attempting to get the ID of a cluster resource an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2838E (USVSS) Can't get DiskSignature Property
Reason: While attempting to get the DiskSignature property of a cluster Physical Disk resource an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2839E (USVSS) Can't get DiskIdGuid property
Reason: While attempting to get the DiskIdGuid property of a cluster Physical Disk resource an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2840E (USVSS) Different OS or processor for sysstate restore
Reason: The computer to which you want to restore the system state has a different OS version and/or processor architecture than the computer that was backed up. This is not valid.
Action: Make sure the computer to which you want to restore the system state has the same OS version and processor architecture.
PC2841E (USVSS) Different computer name for sysstate restore
Reason: The computer to which you want to restore a partial set of system state components has a different computer name than the computer that was backed up. This is not valid.
Action: Make sure the computer to which you want to restore a partial set of system state components has the same computer name or restore the entire set of system state components.
PC2842E (USVSS) Can't allocate changed file information
Reason: While attempting to allocate memory for a changed file list entry, there was insufficient memory.
Action: Close applications or free memory.
PC2843E (USVSS) Can't get BackupTimeStamp attribute
Reason: An error occurred while attempting to get the BackupTimeStamp attribute from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2845E (USVSS) Non-resident MFT record attribute
Reason: While scanning the MFT for a volume a MFT record was found that contains a non-resident attribute which cannot be parsed.
Action: Contact FDR/UPSTREAM Tech Support.
PC2846E (USVSS) Can't allocate FRN info
Reason: While attempting to allocate memory for a FRN info array, there was insufficient memory.
Action: Close applications or free memory. An error occurred while attempting to open a volume in order to flush its file buffers.
Action: Contact FDR/UPSTREAM Tech Support.
PC2847E (USVSS) Can't find base MFT record
Reason: While scanning the MFT for a volume a secondary MFT record was found for which a base MFT record could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC2848E (USVSS) Can't copy file
Reason: An error occurred while attempting to copy a file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2849E (USVSS) Can't select additional components
Reason: An error occurred while performing a custom component selection process for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC2850E (USVSS) Can't start component verification
Reason: While attempting to start the verification process for the components, an error occurred.
Action: See additional messages and the Application Event Log.
PC2851E (USVSS) Unknown async wait result
Reason: While waiting for an asynchronous VSS function call to complete, an unknown wait result was received.
Action: Contact FDR/UPSTREAM Tech Support.
PC2852E (USVSS) Unknown function status
Reason: While waiting for an asynchronous VSS function call to complete, the status of the function could not be determined.
Action: Contact FDR/UPSTREAM Tech Support.
PC2853E (USVSS) Can't get IXMLDOMElement interface
Reason: An error occurred while attempting to link to the IXMLDOMElement interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2854E (USVSS) Can't set XML attribute
Reason: An error occurred while attempting to set the value of a XML attribute.
Action: Contact FDR/UPSTREAM Tech Support.
PC2855E (USVSS) Can't set registry value
Reason: An error occurred while attempting to set a value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2856E (USVSS) Can't get XML attribute
Reason: An error occurred while attempting to get the value of a XML attribute.
Action: Contact FDR/UPSTREAM Tech Support.
PC2857E (USVSS) Can't get XML attribute type
Reason: An error occurred while attempting to get the type of a XML attribute.
Action: Contact FDR/UPSTREAM Tech Support.
PC2858E (USVSS) Can't get IXMLDOMDocument interface
Reason: An error occurred while attempting to link to the IXMLDOMDocument interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2859E (USVSS) Can't load XML file
Reason: An error occurred while attempting to load a XML file into the internal XML document. The XML file may be corrupt.
Action: Check the syntax of the XML file. Contact FDR/UPSTREAM Tech Support.
PC2860E (USVSS) Can't get the first XML node
Reason: An error occurred while attempting to get the first node of a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2861E (USVSS) Can't remove a XML node
Reason: An error occurred while attempting to remove a node from a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2862E (USVSS) Can't create a XML node
Reason: An error occurred while attempting to create a node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2863E (USVSS) Can't open a registry node
Reason: An error occurred while attempting to open a node (key) in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2864E (USVSS) Can't get first XML child node
Reason: An error occurred while attempting to get the first child node of a parent node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2865E (USVSS) Can't get next XML node
Reason: An error occurred while attempting to get the next node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2866E (USVSS) Can't get number of registry nodes
Reason: An error occurred while attempting to get the number of child nodes (keys) of a parent node (key) in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2867E (USVSS) Can't get next XML child node
Reason: An error occurred while attempting to get the next child node of a parent node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2868E (USVSS) Can't get number of XML child nodes
Reason: An error occurred while attempting to get the number of child nodes of a parent node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2869E (USVSS) Can't get child node
Reason: An error occurred while attempting to get a child node of a parent node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2870E (USVSS) Can't query registry attribute
Reason: An error occurred while attempting to get an attribute (value) from the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC2871E (USVSS) Can't get xml node name
Reason: An error occurred while attempting to get the name of a node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2872E (USVSS) Invalid attribute list
Reason: An internal UPSTREAM error occurred while attempting to find a node in a XML document based on an invalid list of attribute names and values.
Action: Contact FDR/UPSTREAM Tech Support.
PC2873E (USVSS) Can't get a XML attribute
Reason: An error occurred while attempting to get an attribute from a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2874E (USVSS) Can' find a XML node
Reason: An error occurred while attempting to find a node in a XML document based on a list of attribute names and values.
Action: Contact FDR/UPSTREAM Tech Support.
PC2875E (USVSS) Can't open backup profile key
Reason: An error occurred while attempting to open the specified backup profile registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2876E (USVSS) Can't find a XML File
Reason: An error occurred while attempting to find a XML file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2877E (USVSS) Can't load XML file
Reason: An error occurred while attempting to load a XML file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2878E (USVSS) Can't get IXMLDOMNode interface
Reason: An error occurred while attempting to link to the IXMLDOMNode interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC2879E (USVSS) Can't find the WinSSBackup XML node
Reason: An error occurred while attempting to find the WinSSBackup node in a XML file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2880E (USVSS) Can't create the WinSSBackup XML node
Reason: An error occurred while attempting to create the WinSSBackup node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2881E (USVSS) Can't add the WinSSBackup XML node
Reason: An error occurred while attempting to add the WinSSBackup node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2882E (USVSS) Invalid environment variable
Reason: An error occurred while attempting to expand an environment variable contained in a string.
Action: Contact FDR/UPSTREAM Tech Support.
PC2883E (USVSS) Can't allocate environment variable
Reason: While attempting to allocate memory for an environment variable entry, there was insufficient memory.
Action: Close applications or free memory.
PC2884E (USVSS) Can't open a XML file
Reason: An error occurred while attempting to open an XML file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2885E (USVSS) Can't find EnvironmentVariables node
Reason: An error occurred while attempting to find the EnvironmentVariables node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2886E (USVSS) Can't find a environment variable node
Reason: An error occurred while attempting to find an environment variable node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2887E (USVSS) Can't get environment variable value
Reason: An error occurred while to get the Value attribute for an environment variable from a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2888E (USVSS) Environment variable is different
Reason: An environment variable value in a XML document is different from the value for the same environment value in the current environment. This indicates that the environment for the restore (the current environment) is different that that for the backup (the environment variables in the XML document). Different environment variable value may lead to serious problems.
Action: Contact FDR/UPSTREAM Tech Support.
PC2889E (USVSS) Can't get file description path
Reason: An error occurred while attempting to get the path from a VSS file description.
Action: Contact FDR/UPSTREAM Tech Support.
PC2890E (USVSS) Can't resolve path environment variable
Reason: An error occurred while attempting to resolve an environment variable within a file description path.
Action: Contact FDR/UPSTREAM Tech Support.
PC2891E (USVSS) Can't get file description file spec
Reason: An error occurred while attempting to get the file spec from a VSS file description.
Action: Contact FDR/UPSTREAM Tech Support.
PC2892E (USVSS) Can't resolve file spec environment variable
Reason: An error occurred while attempting to resolve an environment variable within a file description file spec.
Action: Contact FDR/UPSTREAM Tech Support.
PC2893E (USVSS) Can't get file description alternate location
Reason: An error occurred while attempting to get the alternate location from a VSS file description.
Action: Contact FDR/UPSTREAM Tech Support.
PC2894E (USVSS) Can't resolve alternate location environment variable
Reason: An error occurred while attempting to resolve an environment variable within a file description alternate location.
Action: Contact FDR/UPSTREAM Tech Support.
PC2895E (USVSS) Can't get file description recursive flag
Reason: An error occurred while attempting to get the recursive flag from a VSS file description.
Action: Contact FDR/UPSTREAM Tech Support.
PC2896E (USVSS) Can't get file description backup type mask
Reason: An error occurred while attempting to get the backup type mask from a VSS file description.
Action: Contact FDR/UPSTREAM Tech Support.
PC2897E (USVSS) Can't gather writer statuses
Reason: An error occurred while attempting to get the statuses for the VSS writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC2898E (USVSS) Can't wait for VSS to gather writer status
Reason: An error occurred while waiting for VSS to gather the statuses of all of the writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC2899E (USVSS) Can't get number of writer statuses
Reason: An error occurred while attempting to get the number of writers that have provided status.
Action: Contact FDR/UPSTREAM Tech Support.
PC2900E (USVSS) Can't get writer status
Reason: An error occurred while attempting to get the status of a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC2901E (USVSS) The snapshot set start timed out
Reason: While attempting to start a snapshot set, a timeout occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC2902E (USVSS) Can't open FilesNotToBackup registry key
Reason: An error occurred while attempting to open the FilesNotToBackup registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2903E (USVSS) Can't enumerate FilesNotToBackup registry key
Reason: An error occurred while attempting to enumerate the subkeys of the FilesNotToBackup registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2904E (USVSS) Can't allocate FilesNotToBackup string
Reason: While attempting to allocate memory for a FilesNotToBackup string, there was insufficient memory.
Action: Close applications or free memory.
PC2905E (USVSS) Can't reallocate a file spec info array
Reason: While attempting to reallocate memory for a file spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC2906E (USVSS) Invalid display name format
Reason: A DisplayNameFormat attribute in the set of Component Display Name Mappings (CDNMs) has an invalid format.
Action: Correct the format of the invalid DisplayNameFormat attribute.
PC2907E (USVSS) Component Display Name Not Unique
Reason: A component display name resolved by applying the mapping rules in the set of Component Display Name Mappings (CDNMs) is not unique. Two or more components have the same resolved component display name
Action: Modify the mapping rules in the CDNM rule set.
PC2908E (USVSS) Can't find the Writers node
Reason: An error occurred while attempting to find the Writers node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2909E (USVSS) Can't find a writer node
Reason: An error occurred while attempting to a writer node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2910E (USVSS) Can't find a component node
Reason: An error occurred while attempting to find a component node in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2911E (USVSS) Can't get BackupStamp
Reason: An error occurred while attempting to get a BackupStamp attribute for a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2912E (USVSS) Can't set previous backup stamp
Reason: An error occurred while attempting to set a previous backup stamp for a VSS component.
Action: Contact FDR/UPSTREAM Tech Support.
PC2913E (USVSS) Can't set BackupTimeStamp attribute
Reason: An error occurred while attempting to set the BackupTimeStamp attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2914E (USVSS) Can't set BackupProfile attribute
Reason: An error occurred while attempting to set the BackupProfile attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2915E (USVSS) Can't set VersionDate attribute
Reason: An error occurred while attempting to set the VersionDate attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2916E (USVSS) Can't set SnapshotSetID attribute
Reason: An error occurred while attempting to set the SnapshotSetID attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2917E (USVSS) Can't set EToATableName attribute
Reason: An error occurred while attempting to set the EToATableName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2918E (USVSS) Can't set AToETableName attribute
Reason: An error occurred while attempting to set the AToETableName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2919E (USVSS) Can't set NumberOfEnvironmentVariables attribute
Reason: An error occurred while attempting to set the NumberOfEnvironmentVariables attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2920E (USVSS) Can't set NumberOfComponentDisplayNameMappings attribute
Reason: An error occurred while attempting to set the NumberOfComponentDisplayNameMappings attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2921E (USVSS) Can't set NumberOfVolumes attribute
Reason: An error occurred while attempting to set the NumberOfVolumes attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2922E (USVSS) Can't set NumberOfMountPoints attribute
Reason: An error occurred while attempting to set the NumberOfMountPoints attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2923E (USVSS) Can't set NumberOfWriters attribute
Reason: An error occurred while attempting to set the NumberOfWriters attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2924E (USVSS) Can't set NumberOfComponents attribute
Reason: An error occurred while attempting to set the NumberOfComponents attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2925E (USVSS) Can't create EnvironmentVariables node
Reason: An error occurred while attempting to create the EnvironmentVariables node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2926E (USVSS) Can't add EnvironmentVariables node
Reason: An error occurred while attempting to add the EnvironmentVariables node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2927E (USVSS) Can't create a environment variable node
Reason: An error occurred while attempting to create an environment variable node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2928E (USVSS) Can't add a environment variable node
Reason: An error occurred while attempting to add an environment variable node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2929E (USVSS) Can't set Name attribute
Reason: An error occurred while attempting to set an environment variable Name attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2930E (USVSS) Can't set Value attribute
Reason: An error occurred while attempting to set an environment variable Value attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2931E (USVSS) Can't create ComponentDisplayNameMappings node
Reason: An error occurred while attempting to create the ComponentDisplayNameMappings node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2932E (USVSS) Can't add ComponentDisplayNameMappings node
Reason: An error occurred while attempting to add the ComponentDisplayNameMappings node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2933E (USVSS) Can't create a component display name mapping node
Reason: An error occurred while attempting to create a component display name mapping node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2934E (USVSS) Can't add a component display name mapping node
Reason: An error occurred while attempting to add a component display name mapping node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2935E (USVSS) Can't set WriterName attribute
Reason: An error occurred while attempting to set a component display name mapping WriterName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2936E (USVSS) Can't set LogicalPath attribute
Reason: An error occurred while attempting to set a component display name mapping LogicalPath attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2937E (USVSS) Can't set ComponentName attribute
Reason: An error occurred while attempting to set a component display name mapping ComponentName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2938E (USVSS) Can't set DisplayNameFormat attribute
Reason: An error occurred while attempting to set a component display name mapping DisplayNameFormat attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2939E (USVSS) Can't create Volumes node
Reason: An error occurred while attempting to create the Volumes node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2940E (USVSS) Can't add Volumes node
Reason: An error occurred while attempting to add the Volumes node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2941E (USVSS) Can't create a volume node
Reason: An error occurred while attempting to create a volume node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2942E (USVSS) Can't add a volume node
Reason: An error occurred while attempting to add a volume node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2943E (USVSS) Can't set OriginalVolumeName attribute
Reason: An error occurred while attempting to set a volume OriginalVolumeName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2944E (USVSS) Can't set SnapshotID attribute
Reason: An error occurred while attempting to set a volume SnapshotID attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2945E (USVSS) Can't set SnapshotVolumeName attribute
Reason: An error occurred while attempting to set a volume SnapshotVolumeName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2946E (USVSS) Can't set NTFS attribute
Reason: An error occurred while attempting to set a volume NTFS attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2947E (USVSS) Can't set UPSTREAMServerDriveCharacter attribute
Reason: An error occurred while attempting to set a volume UPSTREAMServerDriveCharacter attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2948E (USVSS) Can't set SelectionType attribute
Reason: An error occurred while attempting to set a volume SelectionType attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2949E (USVSS) Can't create MountPoints node
Reason: An error occurred while attempting to create the MountPoints node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2950E (USVSS) Can't add MountPoints node
Reason: An error occurred while attempting to add the MountPoints node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2951E (USVSS) Can't create a mount point node
Reason: An error occurred while attempting to create a mount point node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2952E (USVSS) Can't add a mount point node
Reason: An error occurred while attempting to add a mount point node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2953E (USVSS) Can't set Path attribute
Reason: An error occurred while attempting to set a mount point Path attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2954E (USVSS) Can't save BACKUP_COMPONENTS
Reason: An error occurred while saving the VSS BACKUP_COMPONENTS node XML data.
Action: Contact FDR/UPSTREAM Tech Support.
PC2955E (USVSS) Can't create BACKUP_COMPONENTS node
Reason: An error occurred while attempting to create the BACKUP_COMPONENTS node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2956E (USVSS) Can't add BACKUP_COMPONENTS node
Reason: An error occurred while attempting to add the BACKUP_COMPONENTS node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2957E (USVSS) Can't create Writers node
Reason: An error occurred while attempting to create the Writers node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2958E (USVSS) Can't add Writers node
Reason: An error occurred while attempting to add the Writers node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2959E (USVSS) Can't create a writer node
Reason: An error occurred while attempting to create a writer node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2960E (USVSS) Can't add a writer node
Reason: An error occurred while attempting to add a writer node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2961E (USVSS) Can't set WriterName attribute
Reason: An error occurred while attempting to set a writer WriterName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2962E (USVSS) Can't set InstanceID attribute
Reason: An error occurred while attempting to set a writer InstanceID attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2963E (USVSS) Can't set ClassID attribute
Reason: An error occurred while attempting to set a writer ClassID attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2964E (USVSS) Can't set BackupSchema attribute
Reason: An error occurred while attempting to set a writer BackupSchema attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2965E (USVSS) Can't set RestoreMethod attribute
Reason: An error occurred while attempting to set a writer RestoreMethod attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2966E (USVSS) Can't set RebootRequired attribute
Reason: An error occurred while attempting to set a writer RebootRequired attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2967E (USVSS) Can't save WRITER_METADATA
Reason: An error occurred while saving the VSS WRITER_METADATA node XML data for one of the writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC2968E (USVSS) Can't create WRITER_METADATA node
Reason: An error occurred while attempting to create the WRITER_METADATA node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2969E (USVSS) Can't add WRITER_METADATA node
Reason: An error occurred while attempting to add the WRITER_METADATA node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2970E (USVSS) Can't create a component node
Reason: An error occurred while attempting to create a component node.
Action: Contact FDR/UPSTREAM Tech Support.
PC2971E (USVSS) Can't add a component node
Reason: An error occurred while attempting to add a component node to a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2972E (USVSS) Can't set LogicalPath attribute
Reason: An error occurred while attempting to set a component LogicalPath attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2973E (USVSS) Can't set ComponentName attribute
Reason: An error occurred while attempting to set a component ComponentName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2974E (USVSS) Can't set Caption attribute
Reason: An error occurred while attempting to set a component Caption attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2975E (USVSS) Can't set ComponentPath attribute
Reason: An error occurred while attempting to set a component ComponentPath attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2976E (USVSS) Can't set DisplayName attribute
Reason: An error occurred while attempting to set a component DisplayName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2977E (USVSS) Can't set HasFileSpecs attribute
Reason: An error occurred while attempting to set a component HasFileSpecs attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2978E (USVSS) Can't set BackupStamp attribute
Reason: An error occurred while attempting to set a component BackupStamp attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2979E (USVSS) Can't set BackupSucceeded attribute
Reason: An error occurred while attempting to set a component BackupSucceeded attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2980E (USVSS) Can't get XML data
Reason: An error occurred while attempting to get the XML data from an internal XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC2981E (USVSS) Can't create XML file
Reason: An error occurred while attempting to create a WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2982E (USVSS) Can't write XML file UNICODE marker
Reason: An error occurred while attempting to writer the UNICODE marker to a WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2983E (USVSS) Can't write XML data
Reason: An error occurred while attempting to writer the XML data to a WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2984E (USVSS) Can't open the Select key
Reason: An error occurred while attempting to open the Select registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2985E (USVSS) Can't save the Select key
Reason: An error occurred while attempting to save the Select registry key to a temporary file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2986E (USVSS) Can't restore key
Reason: An error occurred while attempting to restore a registry key from a temporary file.
Action: Contact FDR/UPSTREAM Tech Support.
PC2987E (USVSS) Can't delete key
Reason: An error occurred while attempting to delete a registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2988E (USVSS) Can't create BackupProfiles key
Reason: An error occurred while attempting to create the "HKEY_LOCAL_MACHINE\SOFTWARE\Innovation data Processing\ FDR/UPSTREAM\WinSS PlugIn Backup Profiles" registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2989E (USVSS) Can't create a backup profile key
Reason: An error occurred while attempting to create the "HKEY_LOCAL_MACHINE\SOFTWARE\Innovation data Processing\ FDR/UPSTREAM\WinSS PlugIn Backup Profiles\" registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2990E (USVSS) Can't recreate a backup profile key
Reason: An error occurred while attempting to recreate the "HKEY_LOCAL_MACHINE\SOFTWARE\Innovation data Processing\ FDR/UPSTREAM\WinSS PlugIn Backup Profiles\" registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC2991E (USVSS) Backup profile key already exists
Reason: An error occurred while attempting to create the "HKEY_LOCAL_MACHINE\SOFTWARE\Innovation data Processing\ FDR/UPSTREAM\WinSS PlugIn Backup Profiles\" registry key. The key already exists and cannot be recreated.
Action: Contact FDR/UPSTREAM Tech Support.
PC2992E (USVSS) Can't set BackupTimeStamp value
Reason: An error occurred while attempting to set the BackupTimeStamp registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2993E (USVSS) Can't set BackupProfile value
Reason: An error occurred while attempting to set the BackupProfile registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2994E (USVSS) Can't set VersionDate value
Reason: An error occurred while attempting to set the VersionDate registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2995E (USVSS) Can't set SnapshotSetID value
Reason: An error occurred while attempting to set the SnapshotSetID registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2996E (USVSS) Can't set EToATableName value
Reason: An error occurred while attempting to set the EToATableName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2997E (USVSS) Can't set AToETableName value
Reason: An error occurred while attempting to set the AToETableName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2998E (USVSS) Can't set NumberOfEnvironmentVariables value
Reason: An error occurred while attempting to set the NumberOfEnvironmentVariables registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC2999E (USVSS) Can't set NumberOfComponentDisplayNameMappings value
Reason: An error occurred while attempting to set the NumberOfComponentDisplayNameMappings registry value.
Action: Contact FDR/UPSTREAM Tech Support.
High Compression Errors
PC3000E High compression reinitialization error
Reason: There was an error initializing for high compression. This is an unexpected error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3001E High compression error
Reason: There was an error attempting to compress a record using high compression.
Action: See additional message.
PC3002E High compression initialization error
Reason: There was an error initializing for high compression. You probably do not have enough memory.
Action: See additional message.
PC3003E Error during high decompression
Reason: There was an error decompressing a record which was compressed using high compression.
Action: Contact FDR/UPSTREAM Tech Support.
PC3004E Error reinitializing high decompression
Reason: There was an error reinitializing during a restore for high compression. This is an unexpected error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3005E Error initializing for high decompression
Reason: There was an error initializing a restore for high compression. You probably do not have enough memory.
Action: See additional message.
PC3006E High compression, non-file overage
Reason: After compressing a block of non-file data, the data was too large to fit into a single record.
Action: Contact FDR/UPSTREAM Tech Support.
PC3007E High decompression, non-file overage
Reason: After decompressing a block of non-file data, the data was too large to fit into a single record. This is an unexpected error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3008E High decompression, non-file input exhausted
Reason: While decompressing a block of non-file data, the data was exhausted without being completed. This is an unexpected error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3009E (Backup) Invalid file spec macro for type
Reason: A file spec which is not an include file spec uses a macro. File spec macros can be used only for include file specs.
Action: Change the SPECTYPE for this file spec.
PC3010E (Backup) Invalid file spec macro
Reason: The macro used for this include file spec is not supported.
Action: Change the macro for this file spec.
PC3011E (Backup) Mutually exclusive file spec macro
Reason: The macro used for this include file spec is mutually exclusive with another previously specified macro.
Action: Change the macro for this file spec.
USVSS Errors
PC3025E (USVSS) Can't set NumberOfVolumes value
Reason: An error occurred while attempting to set the NumberOfVolumes registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3026E (USVSS) Can't set NumberOfMountPoints value
Reason: An error occurred while attempting to set the NumberOfMountPoints registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3027E (USVSS) Can't set NumberOfWriters value
Reason: An error occurred while attempting to set the NumberOfWriters registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3028E (USVSS) Can't set NumberOfComponents value
Reason: An error occurred while attempting to set the NumberOfComponents registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3029E (USVSS) Can't create EnvironmentVariables key
Reason: An error occurred while attempting to create the EnvironmentVariables registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3030E (USVSS) Can't create an environment variable key
Reason: An error occurred while attempting to create an environment variable registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3031E (USVSS) Can't set Name value
Reason: An error occurred while attempting to set an environment variable Name registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3032E (USVSS) Can't set Value value
Reason: An error occurred while attempting to set an environment variable Value registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3033E (USVSS) Can't create ComponentDisplayNameMappings key
Reason: An error occurred while attempting to create the ComponentDisplayNameMappings registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3034E (USVSS) Can't create a component display name mapping key
Reason: An error occurred while attempting to create a component display name mapping registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3035E (USVSS) Can't set WriterName value
Reason: An error occurred while attempting to set a component display name mapping WriterName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3036E (USVSS) Can't set LogicalPath value
Reason: An error occurred while attempting to set a component display name mapping LogicalPath registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3037E (USVSS) Can't set ComponentName value
Reason: An error occurred while attempting to set a component display name mapping ComponentName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3038E (USVSS) Can't set DisplayNameFormat value
Reason: An error occurred while attempting to set a component display name mapping DisplayNameFormat registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3039E (USVSS) Can't create Volumes key
Reason: An error occurred while attempting to create the Volumes registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3040E (USVSS) Can't create a volume key
Reason: An error occurred while attempting to create a volume registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3041E (USVSS) Can't set OriginalVolumeName value
Reason: An error occurred while attempting to set a volume OriginalVolumeName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3042E (USVSS) Can't set SnapshotID value
Reason: An error occurred while attempting to set a volume SnapshotID registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3043E (USVSS) Can't set SnapshotVolumeName value
Reason: An error occurred while attempting to set a volume SnapshotVolumeName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3044E (USVSS) Can't set NTFS value
Reason: An error occurred while attempting to set a volume NTFS registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3045E (USVSS) Can't set UPSTREAMServerDriveCharacter value
Reason: An error occurred while attempting to set a volume UPSTREAMServerDriveCharacter registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3046E (USVSS) Can't create MountPoints key
Reason: An error occurred while attempting to create the MountPoints registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3047E (USVSS) Can't create a mount point key
Reason: An error occurred while attempting to create a mount point registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3048E (USVSS) Can't set Path value
Reason: An error occurred while attempting to set a mount point Path registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3049E (USVSS) Can't create Writers key
Reason: An error occurred while attempting to create the Writers registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3050E (USVSS) Can't create a writer key
Reason: An error occurred while attempting to create a writer registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3051E (USVSS) Can't set WriterName value
Reason: An error occurred while attempting to set a writer WriterName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3052E (USVSS) Can't set InstanceID value
Reason: An error occurred while attempting to set a writer InstanceID registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3053E (USVSS) Can't set ClassID value
Reason: An error occurred while attempting to set a writer ClassID registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3054E (USVSS) Can't set BackupSchema value
Reason: An error occurred while attempting to set a writer BackupSchema registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3055E (USVSS) Can't set RestoreMethod value
Reason: An error occurred while attempting to set a writer RestoreMethod registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3056E (USVSS) Can't set RebootRequired value
Reason: An error occurred while attempting to set a writer RebootRequired registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3057E (USVSS) Can't create Components key
Reason: An error occurred while attempting to create the Components registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3058E (USVSS) Can't create a component key
Reason: An error occurred while attempting to create a component registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3059E (USVSS) Can't set LogicalPath value
Reason: An error occurred while attempting to set a component LogicalPath registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3060E (USVSS) Can't set ComponentName value
Reason: An error occurred while attempting to set a component ComponentName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3061E (USVSS) Can't set Caption value
Reason: An error occurred while attempting to set a component Caption registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3062E (USVSS) Can't set ComponentPath value
Reason: An error occurred while attempting to set a component ComponentPath registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3063E (USVSS) Can't set DisplayName value
Reason: An error occurred while attempting to set a component DisplayName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3064E (USVSS) Can't set SelectionType value
Reason: An error occurred while attempting to set a component SelectionType registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3065E (USVSS) Can't set HasFileSpecs value
Reason: An error occurred while attempting to set a component HasFileSpecs registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3066E (USVSS) Can't set BackupStamp value
Reason: An error occurred while attempting to set a component BackupStamp registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3067E (USVSS) Can't set BackupSucceeded value
Reason: An error occurred while attempting to set a component BackupSucceeded registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3068E (USVSS) Can't save the BackupProfile key
Reason: An error occurred while attempting to save the "HKEY_LOCAL_MACHINE\SOFTWARE\Innovation data Processing\ FDR/UPSTREAM\WinSS PlugIn Backup Profiles\" registry key to the WinSS.key file.
Action: Contact FDR/UPSTREAM Tech Support.
PC3069E (USVSS) Can't create the WinSS.xml file
Reason: An error occurred while attempting to create the WinSS.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC3070E (USVSS) Can't create the WinSS.key file
Reason: An error occurred while attempting to create the WinSS.key file.
Action: Contact FDR/UPSTREAM Tech Support.
PC3071E (USVSS) Can't allocate file spec info array
Reason: While attempting to allocate memory for a new file spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC3072E (USVSS) Can't get number of differenced files
Reason: An error occurred while attempting to get the number of differenced file specs for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC3073E (USVSS) Can't reallocate a file spec info array
Reason: While attempting to reallocate memory for a file spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC3074E (USVSS) Can't get differenced file
Reason: An error occurred while attempting to a differenced file spec for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC3075E (USVSS) Can't resolve differenced file path
Reason: An error occurred while attempting to resolve an environment variable within a differenced file path.
Action: Contact FDR/UPSTREAM Tech Support.
PC3076E (USVSS) Can't resolve differenced file spec
Reason: An error occurred while attempting to resolve an environment variable within a differenced file spec.
Action: Contact FDR/UPSTREAM Tech Support.
PC3077E (USVSS) Unable to find unique differenced file owner
Reason: While attempting to find the owning component for a differenced file spec, more than two components were found to be possible owners.
Action: Contact FDR/UPSTREAM Tech Support.
PC3078E (USVSS) Can't sort file specs
Reason: An error occurred while attempting to sort the file spec info array.
Action: Contact FDR/UPSTREAM Tech Support.
PC3079E (USVSS) Can't get number of writers in the backup
Reason: An error occurred while attempting to the the number of writers involved in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3080E (USVSS) Can't get a writer from the backup
Reason: An error occurred while attempting to get a writer from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3081E (USVSS) Can't get backup writer information
Reason: An error occurred while attempting to get the information about a writer in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3082E (USVSS) Can't flush PendingFileRenameOperations
Reason: An error occurred while flushing the pending rename operations to the PendingFileRenameOperations value of the HKLM\SYSTEM\CurrentControlSet\Control\Session Manager registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3083E (USVSS) Can't get number of components in the backup
Reason: An error occurred while attempting to get the number of components involved in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3084E (USVSS) Can't get a component from the backup
Reason: An error occurred while attempting to get a component from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3085E (USVSS) Can't get backup component logical path
Reason: An error occurred while attempting to get the logical path for a component in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3086E (USVSS) Can't get backup component name
Reason: An error occurred while attempting to get the component name for a component in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3087E (USVSS) Can't find component
Reason: While attempting to find a component from the backup in the currently available set of components, a currently available component could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC3088E (USVSS) Can't get differenced files
Reason: An error occurred while attempting to get the differenced file specs for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC3089E (USVSS) Can't get backup stamp for a backup component
Reason: An error occurred while attempting to get the backup stamp for a component from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3090E (USVSS) Component options too long
Reason: While attempting to combine the options from two user specs for the same component it was determined that the combined set of options is too long.
Action: Contact FDR/UPSTREAM Tech Support.
PC3091E (USVSS) Can't allocate an expanded user spec info array
Reason: While attempting to allocate memory for an expanded user spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC3092E (USVSS) Different mount point configuration
Reason: While attempting to identify the identical volume as a volume from the backup an identical volume was found and both have multiple but different mount points.
Action: Modify the current volume/mount point configuration or ensure that the volume/mount point configuration is as it was for the backup.
PC3093E (USVSS) File system for volume is not NTFS
Reason: An NTFS volume from the backup cannot be restored to a non-NTFS file system volume unless NoNTFSCheck=Y is specified as a PLUGINPARAMETERS subparameter.
Action: Change the volume to which to restore the volume from the backup or specify the NoNTFSCheck=Y PLUGINPARAMETERS subparameter.
PC3094E (USVSS) Specified restore volume does not exist
Reason: The volume specified as the destination of a restore does not exist.
Action: Specify a different volume as the destination for the restore or ensure that the volume/mount point configuration is as it was for the backup.
PC3095E (USVSS) Specified restore mount point does not exist
Reason: The mount point specified as the destination of a restore does not exist.
Action: Specify a different mount point as the destination for the restore or ensure that the volume/mount point configuration is as it was for the backup.
PC3096E (USVSS) Specified backup mount point does not exist
Reason: The mount point specified as the origin of a restore does not exist. A mount point that was not backed up cannot be restored.
Action: Examine the backup.
PC3097E (USVSS) Backup of specified component failed
Reason: The component specified as the origin of a restore was not backed up successfully. The component cannot be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC3098E (USVSS) Specified backup component does not exist
Reason: The component specified in a backup or restore file specification does not exist. A component that was not backed up cannot be restored.
Action: Modify the file specification.
PC3099E (USVSS) Can't remove duplicate user specs
Reason: An error occurred while attempting to remove duplicate file specs from the total set of file specs.
Action: Contact FDR/UPSTREAM Tech Support.
Remote Initiate Errors
PC3100N Waiting for remote initiate
Reason: UPSTREAM is waiting for the remote system to start a function on the PC. You can press the CANCEL button to exit UPSTREAM.
PC3101I Remote initiate received
Reason: A remote initiated function will now be processed.
PC3102D Remote initiate received
Reason: A remote initiated function was received. It will be processed shortly.
PC3103E Error allocating data for remote initiate
Reason: There was insufficient data space for processing the remote initiate request. Further remote initiates will be rejected.
Action: Exit UPSTREAM and free memory.
PC3104E Remote initiated request rejected
Reason: The remote initiate request is rejected due to a problem reported earlier.
PC3105E Remote requested non-queued and PC busy
Reason: The remote system requested immediate execution of a function and this machine is currently busy processing another function that can not be interrupted at this point.
Action: The remote will retry.
PC3106E Error saving current parameters during remote
Reason: There was an error saving the current parameters so that remotely initiated parameters could be processed.
Action: See additional messages.
PC3107E Invalid parameter/value received (%s)
Reason: A parameter received from a remotely initiated request was in error.
PC3108E Error recalling parameters for execution
Reason: There was an error retrieving saved remotely specified parameters for execution now.
Action: See additional messages.
PC3109E Error saving parameters for remote execution
Reason: There was an error saving the received parameters.
Action: See additional messages.
PC3110E Error restoring original parameters
Reason: After saving parameters for remote execution, there was an error restoring the original parameters.
Action: See additional messages.
PC3111E Missing parameter (%s %s)
Reason: The parameters that were remotely received are incomplete.
Action: See additional messages.
PC3112E Error saving current parameters
Reason: There was an error saving the current parameters so that a remote execution request can be processed.
Action: See additional messages.
PC3113E Error restoring current parameters
Reason: There was an error restoring the current parameters after a remote execution request was processed.
Action: See additional messages.
PC3114E User requested reject of remote functions
Reason: To reactivate remote functions, select the "Unattended Remote Functions" option from the Action menu.
PC3115E Error saving remote parameter file name
Reason: There was an error saving the remotely specified parameter file name.
Action: See additional messages.
PC3116E Error reading remotely specified param file
Reason: There was an error reading the parameter file specified by the remote system.
Action: Verify that the name is correct.
PC3117E User requested reject of PC requests
Reason: The user requested that PC initiation requests be rejected.
PC3118E PC is busy
Reason: The PC is busy processing another request and is not available to process a request where the calling facility (USTBATCH or another PC) will wait for completion.
PC3119D Remote initiate received
PC3120E Wrong PC
Reason: This request was sent to a PC whose logical name does not match the logical name of this PC. The logical name received is:
PC3121I Starting another instance of UPSTREAM
Reason: In order to be able to handle multiple simultaneous remote initiations from the Storage Server, another instance of UPSTREAM is being started to receive another remote initiation. The UPSTREAM command line follows:
PC3122D Waiting for remote initiate, but not listening
Reason: You specified ACTION 3 (wait for remote request) in the parameter file, but you have LISTENFORREMOTE N. Activate "Listen for Remote Function" in "Remote" menu (set LISTENFORREMOTE Y), or specify a different ACTION.
PC3123E Attach manager only facility - this is UPSTREAM
Reason: UPSTREAM received a request which can only be handled by the UPSTREAM attach manager and it is thus denied.
PC3124E Error occurred sending status port info
Reason: While sending the status port information to a cooperating UPSTREAM application, this error occurred.
Action: See additional messages.
PC3125E Error occurred during receipt of remote request
PC3126E Error occurred during receipt of parameters
PC3127E Error occurred during a CONFIRMED of remote
PC3128E Error occurred during the end of a conversation
PC3129E Error occurred while test for remote initiate
PC3130N Waiting for remote initiate
Reason: UPSTREAM is waiting for the remote system to start a function. For PC operating systems (GUI), press the CANCEL button to terminate. For UNIX operating systems use CTRL-C or the kill command if running in the background to terminate. For all others, press the [ESC] key.
PC3131N Waiting for remote initiate
Reason: UPSTREAM is waiting for the remote system to start a function. Use CTRL-C or the kill command if running in the background to terminate.
PC3132N Waiting for remote initiate
Reason: UPSTREAM is waiting for the remote system to start a function. Press [ESC] to terminate.
PC3133I Starting a child process for the remote request
PC3134I Failed to start a new instance of UPSTREAM
Reason: Failed to start a new instance of UPSTREAM to handle multiple remote initiations from the Storage Server The error code and UPSTREAM command line follows:
PC3135I UPSTREAM user interface request received
PC3136I Started instance of UPSTREAM now terminated:
PC3137E PEEK operation failed.
Reason: When processing remote request in Attach Manager mode UPSTREAM failed to PEEK on the action requested. The remote request will not be processed.
PC3138E Attach manager only facility
Reason: UPSTREAM received a request which can only be handled by an UPSTREAM running in an attach manager mode and it is thus denied.
PC3139E Error retrieving status info (UNIX only)
Reason: Error in waitpid function to check on running UPSTREAM:
PC3140E Insufficient memory
Reason: There was insufficient memory when allocating the queue area to save the remote request. This job will not be processed.
Action: Close applications or free memory.
PC3141E Rejected because UPSTREAM's busy
Reason: The user specified a USQUEUETIMELIMIT of 0 which causes UPSTREAM to reject any CONV=WAIT or CONV=KEEP jobs if it is busy processing another event.
PC3142E Error deleting queued request
Reason: A queued request which subsequently failed could not be deleted and may end up being serviced.
Action: See additional messages.
PC3143E Remote job timed out
Reason: One of your remote jobs timed out and will not be processed.
PC3144E Error removing timed out job
Reason: A queued request which subsequently timed out could not be deleted and may end up being serviced.
Action: See additional messages.
PC3145E Error accessing saved job
Action: See additional messages.
PC3146E Invalid system for remote request
Action: Add this systems to your list of valid remote systems in the UPSTREAM Configurator (Personalization).
PC3147E Remote system didn't specify a local user
Action: Upgrade the remote copy of UPSTREAM or update remote user personalization settings in the UPSTREAM configurator.
PC3148E Remote system's user denied
Reason: The user who's logged onto the requesting system has been denied access to UPSTREAM functions.
Action: Add this user to the remote system definition in user personalization settings in the UPSTREAM configurator.
PC3149E Local user name not specified
Reason: UPSTREAM personalization requires that you enter a local user name before accessing UPSTREAM functions on this system.
Action: Specify LOCALUSER and LOCALPASSWORD parameters.
PC3150E Error switching to logged on security
Action: See additional messages.
PC3151I Closing UPSTREAM
Reason: UPSTREAM processed the single function that the attach manager started it for.
PC3152I Closing UPSTREAM
Reason: UPSTREAM processed the single function over the Java status port that the attach manager started it for.
PC3153I Closing UPSTREAM
Reason: UPSTREAM closed by user request.
PC3154I Closing UPSTREAM
Reason: UPSTREAM closing due to a fatal listen error.
PC3155I Closing UPSTREAM
Reason: UPSTREAM closing - REMOTETIMEOUT exceeded.
PC3156I Closing UPSTREAM
Reason: UPSTREAM closed by external request.
PC3157I Closing UPSTREAM
Reason: UPSTREAM closed by remote Java program.
PC3158E Occurred popping the remote timed queue
PC3159E Occurred checking for remote initiate
PC3160E Occurred between remote initiates (1)
PC3161E Occurred between remote initiates (1)
PC3162I StartProgam request failed.
Reason: There was an error processing StartProgram request to start a new copy of UPSTREAM:
PC3163E Remotely initiated request failed
Reason: There was an error starting a new instance of UPSTREAM to process a remote initiate request:
PC3164E Failed to obtain status ports
Reason: When preparing to start a new copy of UPSTREAM, we were not able to find a free pair of status ports. Remote request will not be processed.
PC3165E Failed to check on the request.
Reason: Unable to check on the incoming remote request. Request will be processed by this instance of UPSTREAM instead of starting another copy.
PC3166E Failed during final check on the request
Reason: Request will be processed by this instance of UPSTREAM instead of starting another copy.
PC3167W Inheritance on sockets is set to be off.
Reason: UPSTREAM determined that the inheritance flag on status sockets was turned off. UPSTREAM will try to fix the problem.
PC3168W Error occurred setting requested timeout
PC3169W Error terminating process:
PC3170I UPSTREAM instance terminated:
PC3171E Error creating security info file
Reason: CONV=WAIT batch jobs which request database backups may later fail for security problems.
Action: See additional messages.
PC3172E Error writing security info file
Reason: CONV=WAIT batch jobs which request database backups may later fail for security problems.
Action: See additional messages.
PC3173I Error deleting security info file
Reason: This file can be deleted manually.
PC3174E Error #%u setting pre-validated info
Action: Contact FDR/UPSTREAM Tech Support.
PC3175E Remote target name %s doesn't match local name %s
Reason: Verify the system you are connected to.
PC3176E Error flushing to test wait cancel
Reason: The wait has been canceled.
PC3177E Canceled waiting for specified time.
PC3178E Canceled waiting for specified time.
PC3179E Remote system not in valid system list
PC3180E Can't restart service while children running
Reason: Retry later.
PC3181E Restart service not supported in this environment
PC3182E Error during set of restart service
PC3183W Restarting Service by Remote Request
PC3184E Restarting Service Failed
PC3185E ComSpec environment variable not found
Reason: The service can't be restarted without a command processor to manage it.
Action: Define ComSpec to point to your command processor (c:\windows\system32\cmd.exe for example).
PC3186E Restart Service must be remote initiated
Reason: ACTION=21 must be the first line of the request.
PC3187I Restart service will kill child PID: %u
PC3188D Kill failed (errno #%d), kill PID: %u using -9
PC3189I Remote system changed from %s to %s
Parameter File Queuing Errors
PC3200E Error allocating memory for parameter queuing
Reason: There was an error allocating enough memory to enqueue a new parameter structure. The process requested will fail.
Action: Free a small amount of additional memory.
PC3201E Error setting specs for parm save
Reason: There was an error setting the current parameter information during a parameter save. The process requested will fail.
Action: See additional messages.
PC3202E Error setting writing parameters for parm save
Reason: There was an error writing the parameters during a parameter save. The process requested will fail.
Action: See additional messages.
USVSS Errors
PC3275E (USVSS) Parent FRN is higher than highest possible FRN
Reason: A Master File Table (MFT) record was found with a $FILE_NAME attribute that contains the File Reference Number (FRN) for a parent directory that is higher than the highest possible FRN for the specified volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC3276E (USVSS) Can't create machine info array
Reason: An error occurred while attempting to create the machine info.
Action: Contact FDR/UPSTREAM Tech Support.
PC3277E (USVSS) Can't get quorum path
Reason: An error occurred while attempting to get a QuorumPath attribute for a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC3278E (USVSS) Computer name not found
Reason: The specified computer name was not found.
Action: Specify a different computer name.
PC3279E (USVSS) Mount point not owned by specified computer
Reason: A file specification was found which references a mount point which is not owned by the specified computer name.
Action: Modify your file specifications.
PC3280E (USVSS) Component not owned by specified computer
Reason: A file specification was found which references a component which is not owned by the specified computer name.
Action: Modify your file specifications.
PC3281E (USVSS) Can't find owner of path
Reason: While attempting to determine which machine owns the following path, the machine could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC3282E (USVSS) Component has file specs on multiple machines
Reason: While attempting to determine which machine owns the following component it was determined that the component has file specs on two or more different machines.
Action: Contact FDR/UPSTREAM Tech Support.
PC3283E (USVSS) Can't remove unneeded VSSInfo
Reason: An error occurred while attempting to remove any unneeded VSSInfo before sending it to the client.
Action: Contact FDR/UPSTREAM Tech Support.
PC3284E (USVSS) Component set on multiple machines
Reason: While attempting to determine which machine owns a set of components it was determined that two or more components have file specs on two or more different machines.
Action: Contact FDR/UPSTREAM Tech Support.
PC3285E (USVSS) Can't set computer name attribute
Reason: An error occurred while attempting to set the computer name attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC3286E (USVSS) Can't set quorum path attribute
Reason: An error occurred while attempting to set the quorum path attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC3287E (USVSS) Can't set computer name value
Reason: An error occurred while attempting to set the computer name value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC3288E (USVSS) Can't set quorum path value
Reason: An error occurred while attempting to set the quorum path value in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC3289E (USVSS) Can't open Service Control Manager
Reason: An error occurred while attempting to open the service control manager.
Action: Contact FDR/UPSTREAM Tech Support.
PC3290E (USVSS) Can't get the service status
Reason: An error occurred while attempting to get the status of the "Hyper-V Virtual Machine Management" service.
Action: Contact FDR/UPSTREAM Tech Support.
PC3291E (USVSS) Can't open Virtualization key
Reason: An error occurred while attempting to open the "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Virtualization" registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC3292E (USVSS) Can't read StoreLocation value
Reason: An error occurred attempting to read the "StoreLocation" registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3293E (USVSS) Can't parse StoreLocation value
Reason: An error occurred attempting to parse the "StoreLocation" registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3294E (USVSS) Can't create InitialStore.xml file
Reason: An error occurred while attempting to create a default InitialStore.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC3295E (USVSS) Can't write InitialStore.xml file
Reason: An error occurred while attempting to write the data to the default InitialStore.xml file.
Action: Contact FDR/UPSTREAM Tech Support.
PC3296E (USVSS) Can't start VMMS service
Reason: An error occurred while attempting to start the "Hyper-V Virtual Machine Management" service.
Action: Contact FDR/UPSTREAM Tech Support.
PC3297E (USVSS) Can't check backup mount points
Reason: An error occurred while checking the mount points for the volumes defined in the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC3298E (USVSS) Can't create directory level
Reason: An error occurred while attempting to create a directory level for a mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC3299E (USVSS) Can't create mount point
Reason: An error occurred while attempting to create a mount point for a volume during.
Action: Contact FDR/UPSTREAM Tech Support.
Remote Request Errors
PC3300E Remote request start conversation error
Reason: There was an error starting the conversation with the remote system.
Action: See the return codes.
PC3301E Remote request send request error
Reason: There was an error sending the remote request record.
Action: See the return codes.
PC3302E Remote request send parameter error
Reason: There was an error sending a remote request parameter.
Action: See the return codes.
PC3303E Remote request confirm error
Reason: The remote system did not accept the remote request.
Action: See additional messages
PC3304E Remote request end conversation error
Reason: There was an error terminating the remote request conversation.
Action: See additional messages
PC3305E Error receiving remote response
PC3306E Expected return code from the remote
PC3307D Remote return code 0.
PC3308W Remote return code %u
PC3309E Remote return code %u
PC3310E User cancelled the wait for completion
Reason: The process will continue in the background.
PC3311I Sent a command to the UPSTREAM Server
Reason: A command was successfully sent to the configured UPSTREAM Server.
PC3312I Sent a remote request %s
Reason: A remote request was successully sent to the specified UPSTREAM Client.
PC3350E Error saving parameters
Reason: There was an error saving your current parameters so that they could be sent to the remote system.
Action: See additional messages.
PC3351E Error opening parameter file
Reason: There was an error opening the file that is used to hold the parameters that are sent for remote execution.
Action: See additional messages.
PC3352E Error reading parameter file
Reason: There was an error reading the parameter file that is used to hold the parameters for remote execution.
Action: See additional messages.
PC3353E Error removing saved parameters
Reason: There was an error removing the saved parameters that were sent to the remote.
Action: See additional messages.
PC3354E Required parameter missing
Reason: When attempting a remote request either the partner LU, mode name or remote TPN was missing.
Action: Enter all the required parameters
PC3355E TCP/IP requested but not activated
Reason: If you wish to connect using TCP/IP to a remote system directly, you must use TCP/IP to connect to the Storage Server.
Action: Respecify.
PC3356W Remote requests via MVS require SNA
Reason: Remote requests to workstation/servers require that you be connected to the Storage Server via SNA. This function will only work if you uncheck the Through MVS option and specify the workstation's IP address directly.
Profile Management Errors
PC3400E Error allocating deletion buffer
Reason: There was an error getting memory for the communications buffer for deleting profile info.
Action: Free memory
PC3401E Error starting conversation
Reason: There was an error starting the conversation to delete a version.
Action: See return codes
PC3402E Error sending start conversation
Reason: There was an error sending the request to begin a conversation to delete a version.
Action: See return codes
PC3403E Error sending remove backup
Reason: There was an error sending the remove backup command.
Action: See return codes
PC3404E Error confirming remove backup
Reason: There was an error validating the remove backup
Action: See return codes or remote message
PC3405E Error ending the conversation
Reason: There was an error ending the conversation when removing a backup.
Action: See return codes
PC3410I Deleting the following backup
PC3411I Deleting all backups in the following profile
USVSS Errors
PC3425E (USVSS) Changed FRN higher than highest possible FRN
Reason: The Change Journal for the specified volume contains a record for a File Reference Number (FRN) that is higher than the highest possible FRN for the specified volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC3426E (USVSS) Can't create hard link and change file info
Reason: While attempting to create the hard link info array and/or the changed file list, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3427E (USVSS) Can't allocate hard link info
Reason: While attempting to allocate memory for a hard link info array, there was insufficient memory.
Action: Close applications or free memory.
PC3428E (USVSS) Can't create hard link info
Reason: While attempting to create the hard link info array, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3429E (USVSS) Can't allocate a file names buffer
Reason: While attempting to allocate memory for a file names buffer, there was insufficient memory.
Action: Close applications or free memory.
PC3430E (USVSS) Can't get file names
Reason: While attempting to get the file names for a file reference number of a volume, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3431E (USVSS) Can't create a heap to hold MFT info
Reason: While attempting to create a memory heap to hold MFT information, there was insufficient memory.
Action: Close applications or free memory.
PC3432E (USVSS) Can't allocate MFTFRNEntry array
Reason: While attempting to allocate memory for a MFTFRNEntry array, there was insufficient memory.
Action: Close applications or free memory.
PC3433E (USVSS) Can't add MFT info
Reason: While scanning the MFT for the specified volume, an error occurred which prevents adding a file name to the in-memory MFT info.
Action: Contact FDR/UPSTREAM Tech Support.
PC3434E (USVSS) Can't get volume MFT info
Reason: An error occurred while scanning the MFT for the specified volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC3435E (USVSS) Can't get changed FRNs from Change Journal
Reason: While attempting to get an array of changed FRNs (files) from the Change Journal, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3436E (USVSS) Can't start Change Journal processing
Reason: While attempting to start the Change Journal processing for a volume, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3437E (USVSS) Can't set Change Journal ending timestamp
Reason: While attempting to set the Change Journal ending timestamp for a volume, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC3438E (USVSS) Changed FRN has no file names
Reason: The Change Journal for the specified volume contains a record for a File Reference Number (FRN) that has no file names.
Action: Contact FDR/UPSTREAM Tech Support.
PC3439E (USVSS) Can't allocate hard link FRN info
Reason: While attempting to allocate memory for a hard link FRN info array, there was insufficient memory.
Action: Close applications or free memory.
Action: Contact FDR/UPSTREAM Tech Support.
PC3440E (USVSS) Can't find hard link FRN info
Reason: While attempting to find a hard link FRN info array entry, it could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC3441E (USVSS) Can't set WriterInstanceName attribute
Reason: An error occurred while attempting to set a writer WriterInstanceName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC3442E (USVSS) Can't set WriterInstanceName value
Reason: An error occurred while attempting to set a writer WriterInstanceName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC3443E (USVSS) Can't get WriterInstanceName attribute
Reason: An error occurred while attempting to get the WriterInstanceName attribute for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC3444E (USVSS) Can't open MountedDevices key
Reason: An error occurred while attempting to open the SYSTEM\MountedDevices key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC3445E (USVSS) Can't allocate a file name buffer
Reason: While attempting to allocate memory for a file name buffer, there was insufficient memory.
Action: Close applications or free memory.
PC3446E (USVSS) Can't enumerate MountedDevices key
Reason: An error occurred while attempting to enumerate the values of the SYSTEM\MountedDevices key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC3447E (USVSS) Can't get common cluster volume name
Reason: An error occurred while attempting a get the common cluster volume name.
Action: Contact FDR/UPSTREAM Tech Support.
PC3448E (USVSS) Can't get the MFT information for a volume
Reason: An error occurred while scanning the MFT for a snapshot volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC3449E (USVSS) Can't start a GetMFTInfo thread
Reason: An error occurred while attempting to start a thread to scan the MFT for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
Storage Server Configuration Errors
PC3450E Error allocating memory
Reason: There was an error allocating memory for Storage Server configuration management.
Action: Free memory or restart program.
PC3451E Error during start conversation error
Reason: There was an error during Storage Server config access.
Action: See additional messages.
PC3452E Error sending start conversation
Action: See additional messages.
PC3453E Error receiving profile
Action: See additional messages.
PC3454E Error sending profile
Action: See additional messages.
PC3455E Error confirming send of profile
Action: See additional messages.
PC3456E Error ending conversation
Reason: There was an error during Storage Server config access.
Action: See additional messages.
PC3457E Error opening Storage Server config file
Reason: There was an error opening the temporary file used to hold the Storage Server configuration entries requested.
Action: See additional messages.
PC3458E Error writing Storage Server config file
Reason: There was an error writing to the temporary file used to hold the Storage Server configuration entries requested.
Action: See additional messages.
PC3459E NULL Structure
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3460E Error reading Storage Server config file
Reason: There was an error reading an entry from the temporary file used to hold the Storage Server configuration entries requested.
Action: See additional messages.
PC3461E Unexpected end of file
Reason: There was an unexpected end of file reading entries from the temporary file used to hold the Storage Server configuration entries requested.
Action: Contact FDR/UPSTREAM Tech Support.
PC3462E Error deleting file
Reason: There was an error deleting the temporary file used to hold the Storage Server configuration entries requested.
Action: See additional messages.
PC3463E Error finding entry in file
Reason: There was an error finding a profile entry in the internal profile file to reflect the update requested.
Action: Contact FDR/UPSTREAM Tech Support.
PC3464E Expected confirm or data
Reason: While receiving profiles, neither a confirm or data was received.
Action: Contact FDR/UPSTREAM Tech Support.
Run Job Errors
PC3700E (Encryption) Encrypted job.
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC3701I Running a job
Reason: The following is the specification for a job to be run immediately.
PC3702E Job file not found
Reason: The file for the job to be run was not found.
Action: Respecify
PC3703I Job execution status
Reason: A step in the execution of a job finished. The job specification, step and return code follow.
PC3704E The COMSPEC environment variable not found
Reason: The COMSPEC environment variable needed to run a job was not specified in the configuration.
Action: For Windows add a "ComSpec=" line to the System Environment Variables list in the System applet of the Control Panel. For all other operating systems add a "SET COMSPEC=" statement to your CONFIG.SYS file (OS/2) or your AUTOEXEC.BAT file (all others).
PC3712D Job Status: %s
Reason: The status for a job.
PC3716D The JOBRETURNCODEMAP parameter is invalid
Reason: The format of the JOBRETURNCODEMAP parameter is invalid. The return code returned to the Storage Server may not be what was expected.
Action: See the following JOBRETURNCODEMAP parameter and the program and Storage Server return codes, and then respecify the JOBRETURNCODEMAP parameter.
PC3721I An error occurred starting a job
Reason: The Windows version of UPSTREAM encountered an error on a CreateProcess call to start the execution of a job.
Action: See the following 3724E message for the return code.
PC3722I An error occurred waiting for a job
Reason: The Windows version of UPSTREAM encountered an error on a WaitForSingleObject call to get the return code from the job execution.
Action: See the following 3724E message for the return code.
PC3723I An error occurred starting a job
Reason: The Windows 3.1 version of UPSTREAM encountered an error on a WinExec call to start the execution of a job.
Action: See the following 3724E message for the return code.
PC3724E A job did not execute
Reason: A job did not execute because of an error in one of the pre-execution steps. The job specification, pre-execution step and step error code follow.
PC3725E Job format error Too many parameters
Reason: There can be no more than 20 command line parameters in a job.
Action: Respecify.
PC3727E File spec not found (FILES missing)
Reason: When requesting a job to be run, you must specify a single file spec with the name of the fully qualified program, script or batch file specified in the FILES parameter.
Action: Respecify.
PC3728E Error switching to user
Reason: While attempting to run a job, there was an error switching to the requested user.
Action: See additional messages.
PC3729E Error switching back from user
Reason: After running the job, there was an error switching back from the requested user.
Action: See additional messages.
PC3730I Terminating parent process (daemon)
Reason: Remotely requested termination of the parent UPSTREAM (daemon) in progress.
PC3731E Error allocating memory for an environment block
Reason: Error allocating memory for an environment block while starting a requested job.
PC3732E Error obtaining environment (Win32)
Reason: Error obtaining environment block:
PC3733I Job still running
Reason: UPSTREAM stopped waiting for the job to terminate either because UPSTREAM itself is terminating or the job ran longer than the wait time limit. The job is still running.
PC3734I Job killed
Reason: The job was killed either because UPSTREAM itself is terminating or the job ran longer than the wait time limit and you requested that it be killed.
PC3735I Job finished with zero return code
Reason: The specified job was run successfully and finished with a return code of 0.
PC3736W Job not run or finished with non-zero return code
Reason: The job was either not run because of a job specification error or some other reason or the job was run and finished with a return code other than 0.
Action: See additional messages.
PC3737E Impersonation for the job failed.
PC3738W Security string for RunJobImpersonation is long.
Reason: Security string used to verify RunJobImpersonation is longer than 44 characters. It will get truncated to 44 characters for verification.
Reporting Errors
PC4500E Error opening report file
Action: See additional messages.
PC4501E Error writing time to report file
Action: See additional messages.
PC4502E Error writing beginning message to report
Action: See additional messages.
PC4503E Error getting text from message file
Action: See additional messages.
PC4504E Error writing a message to the report
Action: See additional messages.
PC4505E Error saving parameters for the report
Action: See additional messages.
PC4506E Error listing parameters for the report
Action: See additional messages.
PC4507E Error reading parameters for the report
Action: See additional messages.
PC4508E Not in session for status reporting
Reason: You requested status reporting and you are not connected to a system to perform this type of reporting.
Action: Respecify.
PC4509E Error accessing report file; Saved in: %s
Reason: There was a file error accessing the report file.
Action: See subsequent messages
PC4510E Error reading temp report.
Reason: There was an error reading a temp report file while appending it to the specified report file name.
PC4511E Error writing report.
Reason: There was an error writing to the specified report file while appending a temp report to it.
PC4512E Report not appended.
Reason: There was an error appending temp report to the report file specified. The current report was saved in the following file:
PC4513W Temp report file not deleted.
Reason: The temporary report file was not deleted. You can delete all files ustmp.*.rpt if there are no UPSTREAM instances running.
Win32 System Errors
PC4600E Required privilege not held
Reason: See an earlier message in this log for details of a privilege which is required for this function.
PC4601W Win32 initialization error
Reason: The initialization of the Win32 WOW thunk layer could not be performed. UPSTREAM can still function as a 16 bit application, but all functionality dependent on the Win32 WOW thunk layer is not available.
PC4602W File system initialization error
Reason: One or more of the Win32 file system functions are not available. UPSTREAM can still function, but long file name support, extended attribute support and possibly other support is not available.
PC4603W The SeBackupPrivilege is disabled
Reason: UPSTREAM will not be able to backup Security information, Extended Attributes and alternate data streams for files and directories.
Action: Ensure your account has the Back up files and directories right granted to it or the account is a member of the Administrators group either directly or indirectly.
PC4604W The SeRestorePrivilege is disabled
Reason: UPSTREAM will not be able to restore Security information, Extended Attributes and alternate data streams for files and directories.
Action: Ensure your account has the Restore files and directories right granted to it or the account is a member of the Administrators group either directly or indirectly.
PC4605W The SeSecurityPrivilege is disabled
Reason: UPSTREAM may be able to backup and restore Security information, Extended Attributes and alternate data streams for files and directories, but not Security ACL information used for auditing access.
Action: Ensure your account has the Manage auditing and security log right granted to it or the account is a member of the Administrators group either directly or indirectly.
PC4606W The SeSystemtimePrivilege is disabled
Reason: UPSTREAM will not be able to synchronize the Windows system clock with the FDR/UPSTREAM server.
Action: Ensure your account has the Change the system time right granted to it or the account is a member of the Administrators group either directly or indirectly.
PC4607E Unable to allocate registry information
Reason: storage for the following file.
Action: Close some other applications and try the UPSTREAM function again.
PC4608E Unable to open the key for a hive file
Reason: Unable to access one of the main registry hive keys in preparation for backing it up.
Action: See additional messages.
PC4609E Unable to save the key for a hive file
Reason: Unable to back up one of the main registry hive files.
Action: See additional messages.
PC4610E Unable to replace the key for a hive file
Reason: Unable to restore one of the main registry hive files.
Action: See additional messages.
PC4611E Unable to get the file name of a loaded hive
Reason: An error occurred while enumerating the values of the "HKLM\SYSTEM\CurrentControlSet\Control\hivelist" key in the registry (HKLM = HKEY_LOCAL_MACHINE). These values contain the file names of the main registry hives that are currently loaded in the registry.
PC4612E Unable to get list of user profile directories
Reason: An error occurred while opening the "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" key in the registry (HKLM = HKEY_LOCAL_MACHINE). This key contains subkeys which are the SIDs for each user that has a user profile directory on disk.
PC4613E Unable to get the name of user's SID subkey
Reason: An error occurred while enumerating the subkeys of the "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" key in the registry (HKLM = HKEY_LOCAL_MACHINE). These subkeys have names that are the SIDs of the users defined to the system that have user profile directories on disk.
PC4614E Unable to open a user's SID subkey
Reason: An error occurred while opening one of the subkeys of the "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" key in the registry (HKLM = HKEY_LOCAL_MACHINE). These subkeys have names that are the SIDs of the users defined to the system that have user profile directories on disk.
Action: See additional messages.
PC4615I Unable to get the profile directory for a user
Reason: An error occurred while reading the ProfileImagePath value for one of the SID subkeys of the "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" key in the registry (HKLM = HKEY_LOCAL_MACHINE). The ProfileImagePath value contains the name of a directory on the disk that contains the user's profile. Part of the user's profile is a file named NTUSER.DAT which contains the user's registry hive.
Action: See additional messages.
PC4617D Backing up Registry and/or Event Log files
Reason: One or more Registry and/or Event Log files are included in this backup.
PC4618E Unable to get list of event log files
Reason: An error occurred while opening the "HKLM\SYSTEM\CurrentControlSet\Services\EventLog" key in the registry (HKLM = HKEY_LOCAL_MACHINE). This key contains subkeys which define the subsections of the event log. The File value for each of these subkeys contains the name of the event log file on disk.
Action: See additional messages.
PC4619E Unable to get the name of an event log section
Reason: An error occurred while enumerating the subkeys of the "HKLM\SYSTEM\CurrentControlSet\Services\EventLog" key in the registry (HKLM = HKEY_LOCAL_MACHINE). These subkeys define the subsections of the event log. The File value for each of these subkeys contains the name of the event log file on disk.
Action: See additional messages.
PC4620E Unable to open an event log section key
Reason: An error occurred while opening one of the subkeys of the "HKLM\SYSTEM\CurrentControlSet\Services\EventLog" key in the registry (HKLM = HKEY_LOCAL_MACHINE). These subkeys define the subsections of the event log. The File value for each of these subkeys contains the name of the event log file on disk.
Action: See additional messages.
PC4621I Unable to get the name of an event log file
Reason: An error occurred while reading the File value for one of the event log section subkeys of the "HKLM\SYSTEM\CurrentControlSet\Services\EventLog" key in the registry (HKLM = HKEY_LOCAL_MACHINE). The File value contains the name of the event log file on disk.
Action: See additional messages.
PC4622E Unable to open an event log file
Reason: An event log file for one of the event log subsections could not be opened.
Action: See additional messages.
PC4623E Unable to backup an event log file
Reason: An event log file for one of the event log sections could not be backed up.
Action: See additional messages.
PC4624D An event log file has been restored to a file
Reason: with a different name. See the following messages for the event log file's original name and the name of the file to which it was restored.
PC4625E (NT) Error allocating put memory
Reason: There was a memory shortage allocating memory required for Windows duplicate file handling.
Action: Either reduce the maximum number of duplicate files or free memory.
PC4627E Event log file excluded
Reason: An attempt to open an event log file on a remote computer for either backup or restore is disallowed by default.
Action: Set the USREMOTENTEVENTLOGS environment variable to Y and try the operation again.
PC4628E Can't get the Win32 process ID
Action: Contact FDR/UPSTREAM Tech Support.
PC4629E Can't get the Win32 process handle
Action: Contact FDR/UPSTREAM Tech Support.
PC4630E Can't get the Win32 thread handle
Action: Contact FDR/UPSTREAM Tech Support.
PC4631E Can't set the Win32 process priority
Action: Contact FDR/UPSTREAM Tech Support.
PC4632E Can't set the Win32 thread priority
Action: Contact FDR/UPSTREAM Tech Support.
PC4633E Can't get the Win32 process priority
Action: Contact FDR/UPSTREAM Tech Support.
PC4634E Can't get the Win32 thread priority
Action: Contact FDR/UPSTREAM Tech Support.
PC4635W Can't find a share name in the registry
Reason: A share name was used to share a drive path on another Windows system, but a definition for this share name could not be found in the registry for that system.
Action: See additional message.
PC4636W Path for share name is not the root
Reason: A share name was used to share a drive path on another Windows system, but the path specified for the share on that system is not the root of its system drive (i.e. "%SystemDrive%\"). As a result UPSTREAM cannot back up or restore the registry files that may reside in this path or one of its subdirectories.
Action: Create an explicitly defined share name for the root of the drive you want to share and map a drive on your local system (the one on which UPSTREAM runs) to that share name. Ex: On remote system: NET SHARE CDRIVE=C:\ On local system: NET MAP X: \\remote\CDRIVE
PC4637E Can't get the computer name
Reason: An error occurred while attempting to get the name of the local computer from the system.
Action: See additional messages
PC4638I (NT) Can't open HKEY_LOCAL_MACHINE key
Reason: An error occurred while attempting to open the HKEY_LOCAL_MACHINE key. This message can be ignored if the target drive is not a Windows system drive.
Action: See additional messages
PC4639E Can't determine the operating system type
Reason: An error occurred while attempting to open the two registry keys that are used to determine the type of computer system. These two keys are: \SOFTWARE\Microsoft\Windows NT\CurrentVersion & \SOFTWARE\Microsoft\Windows\CurrentVersion
Action: See additional messages
PC4640E Can't get the SystemRoot registry value
Reason: An error occurred while attempting to read the SystemRoot registry value.
Action: See additional messages
PC4641E Can't open the Shares registry key
Reason: An error occurred while attempting to open the Shares registry key.
Action: See additional messages
PC4642E Can't open the \MACHINE registry key
Reason: An error occurred while attempting to open the \MACHINE registry key.
Action: See additional messages
PC4643E Can't open the \USER registry key
Reason: An error occurred while attempting to open the \USER registry key.
Action: See additional messages
PC4644E Can't open the hivelist registry key
Reason: An error occurred while attempting to open the SYSTEM\CurrentControlSet\Control\hivelist registry key.
Action: See additional messages
PC4646I Could not create the event log list
Reason: A problem exists in the Windows registry which prevented UPSTREAM from creating a list of event log files. This does not prevent UPSTREAM from performing a backup of the registry or other non-event log files.
Action: Examine the registry to ensure that each of the subkeys of \HKLM\System\CurrentControlSet\Services\EventLog have a "File" value name with the name of a valid event log file as its value.
PC4647E (WinNT) Insufficient memory
Reason: There was insufficient memory allocating memory to hold file information for Windows.
Action: Close applications or free memory.
PC4648E (WinNT) Error locating save info list entry
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4649E (WinNT) Error converting from Unicode
Action: See additional messages.
PC4650E (WinNT) Error converting from Unicode
Reason: This error occurred converting a file name which actually contained Unicode characters.
Action: See additional messages.
PC4651E (WinNT) Length exceeded converting from Unicode
Reason: This file will not translate properly.
Action: Rename the file to include fewer non-ANSI codes.
PC4652E (WinNT) Error converting to Unicode
Action: See additional messages.
PC4653E (WinNT) Error converting to Unicode
Reason: This error occurred converting a file name which actually contained Unicode characters.
Action: See additional messages.
PC4654D (WinNT) Error determining if we are NTFS
Reason: While performing an initial directory search there was an error determining if the volume is NTFS.
Action: See additional messages.
PC4655D (WinNT) Error determining if we are NTFS
Reason: While performing an subsequent directory search there was an error determining if the volume is NTFS.
Action: See additional messages.
PC4656D (WinNT) Error setting permissions
Reason: There was an error adding the user to the permissions list for the file or directory.
Action: See additional messages.
PC4657E (Win32) Error continuing file search
Action: See additional messages.
PC4658D (WinNT) Error determining NTFS drive status
Reason: There was a Windows error determining if this path was an NTFS drive.
Action: See additional messages.
PC4659D (WinNT) Error loading permissions library
Action: See additional messages.
PC4660D (WinNT) Error loading permissions function
Action: See additional messages.
PC4661D (WinNT) Error getting existing permissions
Reason: While attempting to add permissions for this user, there was an error getting the existing permissions.
Action: See additional messages.
PC4662D (WinNT) Error getting user name
Reason: While attempting to add permissions for this user, there was an error getting the name of the current user.
Action: See additional messages.
PC4663D (WinNT) Error adding to ACL
Reason: While attempting to add permissions for this user, there was an error adding the user's information to the existing ACL.
Action: See additional messages.
PC4664D (WinNT) Error setting permissions
Reason: While attempting to add permissions for this user to the file system, there was an error.
Action: See additional messages.
PC4665D (WinNT) Error testing security
Reason: While attempting to take security, there was a non-security related error.
Action: See additional messages.
PC4666D (WinNT) Error setting permissions during open
Reason: There was an error setting the permissions for a file after a failed file open.
Action: See additional messages.
PC4667W (WinNT) Error creating hard link
Reason: Error writing hard link header.
Action: See file I/O message.
PC4668W (WinNT) Error creating hard link
Reason: Error writing hard link name.
Action: See file I/O message.
PC4669W (WinNT) Error creating hard link
Reason: Error writing hard link trailer.
Action: See file I/O message.
PC4670I (WinNT) Attempting to authorize key/subkey
Reason: There was an error accessing the key/subkey below. UPSTREAM will attempt to authorize it.
Action: If the operation fails or the access still fails, contact FDR/UPSTREAM Tech Support. Otherwise Otherwise, future accesses will work and this message will not occur again.
PC4671E (WinNT) Error looking up account information
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4672E (WinNT) Error opening registry key for write
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4673E (WinNT) Error looking up key security
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4674E (WinNT) Error initializing security descriptor
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4675E (WinNT) Error getting DACL
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4676E (WinNT) Error getting ACL info
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4677E (WinNT) Error initializing ACL
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4678E (WinNT) Error getting ACE
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC4679E (WinNT) Error adding ACE
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
USTPServ Errors
PC4680E Invalid parameters passed to USTPSERV
Reason: The service name and program specification are required as the first two paramters to USTPSERV.EXE.
Action: Run the USTPCFG.EXE program, select the TP service for which this execution applies, change the EXE Path Name field to "d:\path\USTPSERV.EXE" and change the Parameters field to "servicename programfilespec [param1 ... paramN]"
PC4681E USTPSERV could not start the service
Reason: The service provided to USTPSERV.EXE could not be started by the Service Control Dispatcher. The name of the service and the error code follow:
PC4682E The service started by USTPSERV did not complete
Reason: The service provided to USTPSERV.EXE did not complete successfully. The name of the service and the error code follow:
PC4683E USTPSERV could not register the SC Handler
Reason: The Service Control Handler for the service provided to USTPSERV.EXE could not be registered. The name of the service and the error code follow:
PC4684E USTPSERV could not set the service status
Reason: The status for the service provided to USTPSERV.EXE could not be set. The name of the service and the error code follow:
PC4685I USTPSERV started the program for the service
Reason: The program for the service provided to USTPSERV.EXE was started successfully. The name of the service and the program specification follow:
PC4686E USTPSERV could not start the program for the service
Reason: The program for the service provided to USTPSERV.EXE could not be started. The name of the service and the program specification follow:
PC4687I The service program started by USTPSERV terminated
Reason: The program for the service provided to USTPSERV.EXE terminated normally. The name of the service and the program specification follow:
PC4688W The service program started by USTPSERV was stopped
Reason: The program for the service provided to USTPSERV.EXE was stopped prematurely. The name of the service and the program specification follow:
PC4689E The service program started by USTPSERV did not terminate
Reason: The program for the service provided to USTPSERV.EXE did not terminate. It may still be running. The name of the service and the program specification follow:
PC4690E The service program started by USTPSERV ABENDED
Reason: The program for the service provided to USTPSERV.EXE terminated abnormally. The name of the service and the program specification follow:
PC4691I The service started by USTPSERV received a SC request
Reason: The service provided to USTPSERV.EXE received a request from the Service Control Manager. The name of the service and the type of request received follow:
PC4692E The program name is not a valid executable program
Reason: The second or third parameter provided to USTPSERV.EXE must be the name of an executable program file, but the program name provided is not a valid 32-Bit or 16-Bit executable program file.
PC4693I The service program started by USTPSERV was not waited on
Reason: USTPSERV.EXE did not wait for the termination of the program for the service provided to it. The program is still running. The name of the service and the program specification follow:
PC4694I Issuing a USCNTL request to kill the program
Reason: USTPSERV.EXE is issuing a USCNTL request to kill the program for which it was started. The name of the service and the USCNTL command line follow:
PC4695W Forcing program termination due to USCNTL failure
Reason: The USCNTL request to kill the program was unsuccessful so USTPSERV.EXE will force the termination of the program's process. The name of the service and program to be terminated follow:
PC4696I Entering UPSTREAM v%s%s (%s) %s (Service: %s)
Reason: The specified UPSTREAM Client service has started.
PC4697I Exiting UPSTREAM (Service: %s)
Reason: The specified UPSTREAM Client service has stopped.
PC4698E (US) Can't set service status
Reason: An error occurred while attempting to set the status of the UPSTREAM Client service with the Service Control Manager.
Action: Contact FDR/UPSTREAM Tech Support.
PC4699E (US) Can't register service
Reason: An error occurred while attempting to registry the UPSTREAM Client service with the Service Control Manager.
Action: Contact FDR/UPSTREAM Tech Support.
USVSS Errors
PC4725E (USVSS) Can't reallocate an expanded user spec info array
Reason: While attempting to reallocate memory for an expanded user spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC4726E (USVSS) Can't get the number of backup volumes
Reason: An error occurred while attempting to get the number of volumes from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC4727E (USVSS) Can't allocate a backup volume info array
Reason: While attempting to allocate memory for a backup volume info array, there was insufficient memory.
Action: Close applications or free memory.
PC4728E (USVSS) Can't get the number of backup mount points
Reason: An error occurred while attempting to get the number of mount points from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC4729E (USVSS) Can't allocate a backup mount point info array
Reason: While attempting to allocate memory for a backup mount point info array, there was insufficient memory.
Action: Close applications or free memory.
PC4730E (USVSS) Can't find Volumes node
Reason: An error occurred while attempting to find the Volumes node.
Action: Contact FDR/UPSTREAM Tech Support.
PC4731E (USVSS) Can't find a volume node
Reason: An error occurred while attempting to find a volume node.
Action: Contact FDR/UPSTREAM Tech Support.
PC4732E (USVSS) Can't get SelectionType
Reason: An error occurred while attempting to get the SelectionType attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4733E (USVSS) Can't get OriginalVolumeName
Reason: An error occurred while attempting to get the OriginalVolumeName attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4734E (USVSS) Can't get SnapshotVolumeName
Reason: An error occurred while attempting to get the SnapshotVolumeName attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4735E (USVSS) Can't get NTFS
Reason: An error occurred while attempting to get the NTFS attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4736E (USVSS) Can't get UPSTREAMServerDriveCharacter
Reason: An error occurred while attempting to get the UPSTREAMServerDriveCharacter attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4737E (USVSS) Can't find MountPoints node
Reason: An error occurred while attempting to find the MountPoints node.
Action: Contact FDR/UPSTREAM Tech Support.
PC4738E (USVSS) Can't get number of mount points
Reason: An error occurred while attempting to get the number of mount points for a volume from the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC4739E (USVSS) Can't find a mount point node
Reason: An error occurred while attempting to find a mount point node.
Action: Contact FDR/UPSTREAM Tech Support.
PC4740E (USVSS) Can't get path
Reason: An error occurred while attempting to get the Path attribute for a mount point.
Action: Contact FDR/UPSTREAM Tech Support.
PC4741E (USVSS) Can't allocate a file spec info array
Reason: While attempting to allocate memory for a file spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC4742E (USVSS) Can't get a writer file description
Reason: An error occurred while attempting to get a file description for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4743E (USVSS) Can't get writer file description information
Reason: An error occurred while attempting to get the information for a file description for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4744E (USVSS) Can't get a component file description
Reason: An error occurred while attempting to get a file description for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4745E (USVSS) Can't get component file description information
Reason: An error occurred while attempting to get the information for a file description for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4746E (USVSS) Can't allocate a dependency info array
Reason: While attempting to allocate memory for a dependency info array, there was insufficient memory.
Action: Close applications or free memory.
PC4747E (USVSS) Can't get a dependency
Reason: An error occurred while attempting to get a dependency for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4748E (USVSS) Can't get dependency writer class ID
Reason: An error occurred while attempting to get the writer class ID for a dependency.
Action: Contact FDR/UPSTREAM Tech Support.
PC4749E (USVSS) Can't get dependency logical path
Reason: An error occurred while attempting to get the logical path for a dependency.
Action: Contact FDR/UPSTREAM Tech Support.
General TCP/IP Errors
PC4750E TCP/IP communications error
Reason: The following messages describes the error and the location within UPSTREAM where it happened.
PC4751E (TCP/IP) sock_init failed
Reason: The sock_init call (which is used to initialize structures and detect the existence of TCP/IP) failed.
Action: Verify that TCP/IP is installed and operational.
PC4752E (TCP/IP) socket failed
Reason: The socket call (which is used to begin communications) failed.
PC4753E (TCP/IP) connect failed
Reason: The connect call which is used to connect to the FDR/UPSTREAM server failed.
PC4754E (TCP/IP) Error allocating internal memory
Reason: There was an error allocating memory which is used for TCP/IP traffic.
Action: Free memory.
PC4755E (TCP/IP) Receive buffer too small
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4756E (TCP/IP) Remote closed connection
Reason: The remote system closed the connection while this system was expecting it to be open.
Action: See remote UPSTREAM log.
PC4757E (TCP/IP) Data size mismatch
Reason: Expected to receive a block of a given size (based on the length prefix) and the data received was a different size.
Action: Contact FDR/UPSTREAM Tech Support.
PC4758E (TCP/IP) Error during confirm
Reason: Error having the Storage Server verify that the data was received correctly.
Action: See additional messages.
PC4759E (TCP/IP) Error during confirmed
Reason: Error notifying the Storage Server that the data has been correctly received.
Action: See additional messages.
PC4760E (TCP/IP) Send sizes wrong
Reason: There was an error matching the requested transmit size to the size encoded in the data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4761E (TCP/IP) soclose failed
Reason: The soclose call which is used to disconnect from the remote failed.
PC4762E (TCP/IP) Exceeded max sockets
Reason: FDR/UPSTREAM has no more room for the more sockets. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4763E (TCP/IP) Sending receive request
Reason: Error occurred when sending a request to the Storage Server to receive.
PC4764E (TCP/IP) socket failed
Reason: The socket call (which is used to begin communications for remote initiates) failed.
PC4765E (TCP/IP) bind failed
Reason: The bind call (which is used to begin communications for remote initiates) failed. This usually occurs when another copy of UPSTREAM has already bound to the inbound TCP port. This message can be ignored unless you need to service remote requests.
PC4766E (TCP/IP) ioctl failed
Reason: The ioctl call (which is used to begin communications for remote initiates) failed.
PC4767E (TCP/IP) accept failed
Reason: The accept call (which is used to begin communications for remote initiates) failed.
PC4768E (TCP/IP) Insufficient memory
Reason: There was not sufficient memory to allocate the CreateTP structure which is necessary to properly process the received request.
Action: Free memory.
PC4769E (TCP/IP) recv failed
Reason: The recv call (which is used to receive data from the remote) failed.
PC4770E (TCP/IP) send failed
Reason: The send call (which is used to send data to the remote) failed.
PC4771E (TCP/IP) Received no data
Reason: The data length received is too small to contain any data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4772E (TCP/IP) Unknown APPC request
Reason: The APPC request was unrecognized. Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4773E (TCP/IP) listen failed
Reason: The listen call (which is used to listen for a remote request) failed.
PC4774E (TCP/IP) Deallocate failed
Reason: The request to the remote to deallocate failed.
PC4775E (TCP/IP) Receive of CONFIRMED failed
Reason: The CONFIRM response was not properly received.
PC4776E (TCP/IP) Expected a CONFIRMED
Reason: While waiting for a CONFIRM response, an unexpected data type was received. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4777E (TCP/IP) linger failed
Reason: The linger call to request unsent data flushed failed.
PC4778W (TCP/IP) Error occurred while flushing data
Reason: The error occurred while flushing data prior to closing the connection.
PC4779E (TCP/IP) Error occurred while setting blocking
Reason: The error occurred when attempting to set the remotely received conversation as blocking.
PC4780E (TCP/IP) Incomplete received
Reason: The data record received is larger than the data buffer. This is an internal FDR/UPSTREAM error.
Action: If this error occurred during a restore, try turning off record packing (set PACKRECSIZE=0). Otherwise, contact FDR/UPSTREAM Tech Support.
PC4781E (TCP/IP) Socket in use
Reason: A socket call returned a socket number in use. There is a bug in your TCP/IP implementation.
Action: Contact FDR/UPSTREAM Tech Support.
PC4782E (TCP/IP) Error in specified TCP/IP Option
Reason: You specified in the UPSTREAM configuration to use a TCP/IP option and your TCP/IP reported the following error.
PC4783E (TCP/IP) Invalid IP address or host name
Reason: The FDR/UPSTREAM server IP address is not valid or the name specified for the FDR/UPSTREAM server was not resolved.
Action: Return to UPSTREAM configurator and check the value of TCP/IP Address field. It should be either dotted IP address or the DNS name of your FDR/UPSTREAM server.
PC4784E (TCP/IP) Name server is not found and there
Reason: is no such entry in the local HOST table.
PC4785E (TCP/IP) The host specified is not found
PC4786E (TCP/IP) The local server does not receive
Reason: a response from an authorized server. Try again.
PC4787E (TCP/IP) Unrecoverable error
PC4788E (TCP/IP) The requested host name is valid, but
Reason: does not have an internet address at the name server.
PC4789D (TCP/IP) Shutdown error
Reason: TCP/IP reported an error during the shutdown. In most cases this will not affect the data transmission.
PC4790D (TCP/IP) Error disabling Nagle algorithm
Reason: There was a TCP/IP error disabling the Nagle algorithm used to improve performance.
PC4791D (TCP/IP) Error enabling Nagle algorithm
Reason: There was a TCP/IP error enabling the Nagle algorithm used to improve performance.
PC4792E (TCP/IP) Error in setting send buffer
Reason: You specified in the UPSTREAM configuration to set the send buffer size and your TCP/IP reported the following error.
PC4793I (TCP/IP) Dynamically adjusted listening port
PC4794I (TCP/IP) CONFIRM connection closed
Reason: Generally can be ignored.
PC4795E (TCP/IP) Error resolving local adapter address
Action: Reconfigure your local outbound adapter address in the UPSTREAM advanced configuration.
PC4796E (TCP/IP) Error binding adapter
Reason: When connecting to a remote system, UPSTREAM had an error using the local adapter (not the Storage Server address) for the connect.
Action: Verify that you have specified the correct IP address for the local adapter in the advanced configuration options.
PC4797E (TCP/IP) Error resolving local adapter address
Action: Reconfigure your local inbound adapter address in the UPSTREAM advanced configuration.
PC4798E (TCP/IP) Error checking receives before close
Reason: An error occurred while checking for any pending data before closing the connection.
PC4799E (TCP/IP) Error in setting receive buffer
Reason: You specified in the UPSTREAM configuration to set the receive buffer size and your TCP/IP reported the following error.
TCP/IP Errors
PC4800E Unknown return code
Reason: The following return code could not be interpreted.
Action: Contact FDR/UPSTREAM Tech Support.
PC4801E (TCP/IP) Not owner
PC4802E (TCP/IP) No such process
PC4803E (TCP/IP) Interrupted system call
PC4804E (TCP/IP) No such device or address
PC4805E (TCP/IP) Bad file number
PC4806E (TCP/IP) Permission denied
PC4807E (TCP/IP) Bad address
PC4808E (TCP/IP) Invalid argument
PC4809E (TCP/IP) Too many open files
PC4810E (TCP/IP) Broken pipe
Reason: Can be caused by some intermediate device (router, cable, etc.) going down. Can also be cause by the remote system going down completely (crashing).
PC4812E (TCP/IP) Operation would block
PC4813E (TCP/IP) Operation now in progress
PC4814E (TCP/IP) Operation already in progress
PC4815E (TCP/IP) Socket operation on non-socket
Reason: (Reservoir) Check the "Duplicate Socket" option in the configurator.
PC4816E (TCP/IP) Destination address required
PC4817E (TCP/IP) Message too long
PC4818E (TCP/IP) Protocol wrong type for socket
PC4819E (TCP/IP) Protocol not available
PC4820E (TCP/IP) Protocol not supported
PC4821E (TCP/IP) Socket type not supported
PC4822E (TCP/IP) Operation not supported on socket
PC4823E (TCP/IP) Protocol family not supported
PC4824E (TCP/IP) Address family not supported by protocol family
PC4825I (TCP/IP) Port number already in use
Reason: Usually caused by another copy of UPSTREAM actively listening on the inbound TCP/IP port.
PC4826E (TCP/IP) Can't assign requested address
PC4827E (TCP/IP) Network is down
PC4828E (TCP/IP) Network is unreachable
PC4829E (TCP/IP) Network dropped connection on reset
PC4830E (TCP/IP) Software caused connection abort
PC4831E (TCP/IP) Connection reset by peer
Reason: Can be caused by a number of different problems. Check the UPSTREAM log on both sides. For Windows may be caused by Windows TCP/IP not properly handing delays (can be fixed by increasing the TcpMaxDataRetransmissions in the registry).
PC4832E (TCP/IP) No buffer space available
Reason: Memory or disk shortage.
PC4833E (TCP/IP) Socket is already connected
PC4834E (TCP/IP) Socket is not connected
PC4835E (TCP/IP) Can't send after socket shutdown
PC4836E (TCP/IP) Too many references: can't splice
PC4837E (TCP/IP) Connection timed out
PC4838E (TCP/IP) Connection refused
Reason: Most often caused by the remote application not running. Can also be caused by TCP/IP on the Storage Server being recycled and UPSTREAM not being recycled.
PC4839E (TCP/IP) Too many levels of symbolic links
PC4840E (TCP/IP) File name too long
PC4841E (TCP/IP) Host is down
PC4842E (TCP/IP) No route to host
PC4843E (TCP/IP) Directory not empty
PC4844E (TCP/IP) Host not found
PC4845I (TCP/IP) Received new request.
PC4846E (TCP/IP) Error examining inbound data
Action: Retry your connection
PC4847E (TCP/IP) Incomplete inbound data
Action: Retry your connection
PC4848E (TCP/IP) Bad socket index (index %d, state %d)
Reason: Detected during set for non-blocking. Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC4849E (TCP/IP) Error setting non-blocking
Reason: There was a TCP/IP error setting the given socket non-blocking (so as to force a timeout).
Action: See additional messages.
PC4850E (TCP/IP) Send timed out.
PC4851E (TCP/IP) Receive timed out.
PC4852E (TCP/IP) Error occurred in a TCP select
PC4853E (UDP/IP) Advertizing error.
Reason: Error encountered during Profile Advertising.
PC4854E (UDP/IP) Error opening socket.
PC4855E (UDP/IP) Error setting reuse option.
PC4856E (UDP/IP) Error binding socket.
PC4857E (UDP/IP) Error joining multi-cast.
PC4858E (UDP/IP) Error setting non-blocking option.
PC4859E (UDP/IP) Error receiving multi-cast.
PC4860I (UDP/IP) Profile Advertising enabled.
Reason: Waiting for the Host advertisement message.
PC4863E (TCP/IP) Error checking inbound byte count
PC4864E (TCP/IP) Error examining inbound data (data)
Action: Retry your connection
PC4865E (TCP/IP) Peek size is larger than the buffer
PC4866I (TCP/IP) Storage server run function request %s
PC4867I (TCP/IP) Director/status request %s
PC4868I (TCP/IP) Storage server request %s
PC4869I (TCP/IP) Director/status request %s
PC4870E (TCP/IP) No data received.
Reason: No data received over control connection within timeout.
USVSS Errors
PC4925E (USVSS) Can't get dependency component name
Reason: An error occurred while attempting to get the component name for a dependency.
Action: Contact FDR/UPSTREAM Tech Support.
PC4926E (USVSS) Can't allocate a component info array
Reason: While attempting to allocate memory for a component info array, there was insufficient memory.
Action: Close applications or free memory.
PC4927E (USVSS) Can't get component
Reason: An error occurred while attempting to get a component for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4928E (USVSS) Can't get component information
Reason: An error occurred while attempting to get the information for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4929E (USVSS) Can't resolve component display name
Reason: An error occurred while attempting to resolve the component display name for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4930E (USVSS) Can't get DisplayName
Reason: An error occurred while attempting to get the DisplayName attribute for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4931E (USVSS) Can't get HasFileSpecs
Reason: An error occurred while attempting to get the HasFileSpecs attribute for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4932E (USVSS) Can't get BackupSucceeded
Reason: An error occurred while attempting to get the BackupSucceeded attribute for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC4933E (USVSS) Can't get the backup writers and components
Reason: An error occurred while attempting to get the writers and components from a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC4934E (USVSS) Can't allocate a writer info array
Reason: While attempting to allocate memory for a writer info array, there was insufficient memory.
Action: Close applications or free memory.
PC4935E (USVSS) Can't get writer metadata
Reason: An error occurred while getting the writer metadata for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4936E (USVSS) Can't get writer identity
Reason: An error occurred while attempting to get the identity of a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4937E (USVSS) Can't get writer backup schema
Reason: An error occurred while attempting to get the backup schema of a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4938E (USVSS) Can't find Writers node
Reason: An error occurred while attempting to find the Writers node.
Action: Contact FDR/UPSTREAM Tech Support.
PC4939E (USVSS) Can't create writer metadata
Reason: An error occurred while attempting to create the metadata for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4940E (USVSS) Can't get BackupSchema
Reason: An error occurred while attempting to get the BackupSchema attribute.
Action: Contact FDR/UPSTREAM Tech Support.
PC4941E (USVSS) Can't get number of writer file specs
Reason: An error occurred while attempting to get the number of file specs for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4942E (USVSS) Can't get writer restore method
Reason: An error occurred while attempting to get the backup schema of a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC4943E (USVSS) Invalid restore method
Reason: A writer specified a restore method which is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC4944E (USVSS) Invalid restore condition
Reason: A writer specified a restore condition which is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC4945E (USVSS) Unsupported custom writer
Reason: A writer was identified which requires a custom restore procedure for which no custom restore procedure exists.
Action: Contact FDR/UPSTREAM Tech Support.
PC4946E (USVSS) Can't search for volumes
Reason: An error occurred while attempting to search for the volumes in the system.
Action: Contact FDR/UPSTREAM Tech Support.
PC4947E (USVSS) Can't get volume information
Reason: An error occurred while attempting to get the information for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4948E (USVSS) Can't get volume mount point paths
Reason: An error occurred while attempting to get the mount point paths for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC4949E (USVSS) Can't allocate a volume info array
Reason: While attempting to allocate memory for a volume info array, there was insufficient memory.
Action: Close applications or free memory.
Windows Specific TCP/IP Errors
PC4950E (Win TCP/IP) Error loading function
Reason: The function below is required but not found.
Action: Verify that WINSOCK.DLL or WSOCK32.DLL is in your PATH and is a high enough version.
PC4951E (Win TCP/IP) WINSOCK.DLL not found
Reason: WINSOCK.DLL or WSOCK32.DLL is required for TCP/IP access.
Action: Verify that it is in your path.
PC4952E (Win TCP/IP) Error loading WINSOCK.DLL
Reason: The following error occurred when loading WINSOCK.DLL or WSOCK32.DLL.
Action: Contact FDR/UPSTREAM Tech Support.
PC4953E (Win TCP/IP) Sockets initialization error
Reason: WSAStartup returned the following return code.
Action: See your TCP/IP documentation.
PC4954E (Win TCP/IP) Error creating test socket
Reason: UPSTREAM creates a test socket to test the functionality of the WinSock environment and the test creation failed.
Action: See return code.
PC4955D (Win TCP/IP) Error in WSAAsyncSelect
Reason: This is a shutdown error and can generally be ignored.
Action: See additional messages.
PC4956D (Win TCP/IP) Timeout waiting for FD_CLOSE
Reason: This is a shutdown error and can generally be ignored.
PC4957D (Win TCP/IP) Set blocking error
Reason: This is a shutdown error and can generally be ignored.
Action: See additional messages.
PC4958W (Win TCP/IP) Error opening firewall file
PC4959W (Win TCP/IP) Error reading firewall file
PC4960W (Win TCP/IP) Error writing firewall file
PC4961W (Win TCP/IP) Error opening temp firewall file
PC4962W (Win TCP/IP) Error renaming firewall file
PC4963W Error #%u resetting firewall using %s
PC4964D Updated firewall to allow UPSTREAM access
Reason: The firewall has been updated to allow UPSTREAM applications to be received.
PC4965W Firewall update failed, RC: %u
Reason: While attempting to update the firewall to allow UPSTREAM applications access, the NETSH RESET FIREWALL command failed.
Action: Run manually and observe the error.
PC4966W Can't get firewall update exit code (RC %u)
Reason: While attempting to update the firewall to allow UPSTREAM applications access, the NETSH RESET FIREWALL command output couldn't be gotten.
Action: Run manually and observe the error.
PC4967W Error waiting for firewall update to complete
Reason: While attempting to update the firewall to allow UPSTREAM applications access, got an error waiting for the NETSH RESET FIREWALL command to complete.
Action: Run manually and observe the error.
PC4969W (WinDSock) Can't load WS2_32.dll
Reason: An error occurred while attempting to load WS2_32.dll.
PC4970W (WinDSock) Can't load WS2_32.dll function
Reason: An error occurred while attempting to load a function from WS2_32.dll.
PC4971W (WinDSock) Can't create duplicate socket
Reason: An error occurred while attempting to create a duplicate socket to be used by the FDR/UPSTREAM Client child process.
PC4972W (WinDSock) Can't send duplicate socket
Reason: An error occurred while attempting to send a duplicate socket to the FDR/UPSTREAM Client child process.
PC4973W (WinDSock) Can't create socket from duplicate
Reason: An error occurred while attempting to create a socket from the duplicate socket descriptor received from the parent UPSTREAM process.
PC4974W (WinDSock) Can't receive duplicate socket
Reason: A timeout occurred while waiting for a duplicate socket descriptor to be received from the parent UPSTREAM process.
USVSS Errors
PC5025E (USVSS) Can't allocate a mount point info array
Reason: While attempting to allocate memory for a mount point info array, there was insufficient memory.
Action: Close applications or free memory.
PC5026E (USVSS) Volume drive letter changed
Reason: The drive letter assigned to a volume has changed since the last backup and the current backup is not a first-time full or full merge backup.
Action: Perform a full merge backup.
PC5027E (USVSS) Not enough drive characters
Reason: While attempting to assign a drive character (not a letter) to a volume which does not have a drive letter, it was determined that there are no more drive characters to assigned.
Action: Contact FDR/UPSTREAM Tech Support.
PC5028E (USVSS) Can't find ComponentDisplayNameMappings node
Reason: An error occurred while attempting to find the ComponentDisplayNameMappings node.
Action: Contact FDR/UPSTREAM Tech Support.
PC5029E (USVSS) Can't get component display name mappings
Reason: An error occurred while attempting to get the component display name mappings from a set of component display name mapping XML data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5030E (USVSS) Can't get number of component display name mappings
Reason: An error occurred while attempting to get the number of component display name mappings.
Action: Contact FDR/UPSTREAM Tech Support.
PC5031E (USVSS) Can't allocate a component display name mapping array
Reason: While attempting to allocate memory for a component display name mapping info array, there was insufficient memory.
Action: Close applications or free memory.
PC5032E (USVSS) Can't get ComponentDisplayNameMapping node
Reason: An error occurred while attempting to get a ComponentDisplayNameMapping node.
Action: Contact FDR/UPSTREAM Tech Support.
PC5033E (USVSS) Can't get ComponentDisplayNameMappings subnode name
Reason: An error occurred while getting the name of a subnode of the ComponentDisplayNameMappings node.
Action: Contact FDR/UPSTREAM Tech Support.
PC5034E (USVSS) Invalid ComponentDisplayNameMappings subnode
Reason: The name of a subnode of the ComponentDisplayNameMappings node is not ComponentDisplayNameMapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC5035E (USVSS) Can't get component display name mapping WriterName attribute
Reason: An error occurred while attempting to get the WriterName attribute of a component display name mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC5036E (USVSS) Can't get component display name mapping LogicalPath attribute
Reason: An error occurred while attempting to get the LogicalPath attribute of a component display name mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC5037E (USVSS) Can't get component display name mapping ComponentName attribute
Reason: An error occurred while attempting to get the ComponentName attribute of a component display name mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC5038E (USVSS) Can't get component display name mapping DisplayNameFormat attribute
Reason: An error occurred while attempting to get the DisplayNameFormat attribute of a component display name mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC5039E (USVSS) Too many volumes were selected
Reason: After processing all of the file specs and all of the selected components it was determined that too many volumes were selected. VSS has a maximum limit of 64 volumes per snapshot set.
Action: Modify the backup file specs so that 64 or less volumes will be selected.
PC5040E (USVSS) Can't find mount point for path
Reason: While attempting to select a mount point for the backup the mount point for the specified path could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC5041E (USVSS) Can't open Sevice Control Manager
Reason: An error occurred while attempting to open a connection to the Service Control Manager.
Action: Contact FDR/UPSTREAM Tech Support.
PC5042E (USVSS) Can't open a service
Reason: An error occurred while attempting to open a service.
Action: Contact FDR/UPSTREAM Tech Support.
PC5043E (USVSS) Can't get the status of a service
Reason: An error occurred while attempting to get the status of a service.
Action: Contact FDR/UPSTREAM Tech Support.
PC5044E (USVSS) Can't start a service
Reason: An error occurred while attempting to start a service.
Action: Contact FDR/UPSTREAM Tech Support.
PC5045E (USVSS) Can't stop a service
Reason: An error occurred while attempting to stop a service.
Action: Contact FDR/UPSTREAM Tech Support.
PC5046E (USVSS) Service start or stop timeout
Reason: While waiting for a service to start or stop a timeout occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC5047E (USVSS) Can't create component display name mapping info array
Reason: An error occurred while attempting to create the component display name mapping info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5048E (USVSS) Can't create mount point info array
Reason: An error occurred while attempting to create the mount point info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5049E (USVSS) Can't create Backup Components interface
Reason: An error occurred while attempting to create the Backup Components interface with VSS.
Action: Contact FDR/UPSTREAM Tech Support.
PC5050E (USVSS) Can't initialize for backup
Reason: An error occurred while attempting to initialize the Backup Components interface for backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5051E (USVSS) Can't gather writer metadata
Reason: An error occurred while attempting to gather the information for the VSS writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC5052E (USVSS) Can't wait for VSS to gather writer metadata
Reason: An error occurred while waiting for VSS to gather the information for all of the writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC5053E (USVSS) Can't get number of writers
Reason: An error occurred while attempting to get the number of VSS writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC5054E (USVSS) Can't create writer info array
Reason: An error occurred while attempting to create the writer info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5055E (USVSS) Can't create component info array
Reason: An error occurred while attempting to create the component info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5056E (USVSS) Can't create dependency info array
Reason: An error occurred while attempting to create the dependency info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5057E (USVSS) Can't create expanded user spec info array
Reason: An error occurred while attempting to create the expanded user spec info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5058E (USVSS) Can't get EToATableName attribute
Reason: An error occurred while attempting to get the EToATableName attribute from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC5059E (USVSS) Can't get AToETableName attribute
Reason: An error occurred while attempting to get the AToETableName attribute from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC5060E (USVSS) Can't get the file name for a FRN of a volume
Reason: An error occurred while attempting to get the fully-qualified file name for a FRN (file reference number) from the MFT of a snapshot volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC5061E (USVSS) File name too long
Reason: A fully-qualified file name on a snapshot volume is too long to process.
Action: Contact FDR/UPSTREAM Tech Support.
PC5062E (USVSS) Can't create backup mount point info array
Reason: An error occurred while attempting to create the backup mount point info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5063E (USVSS) Can't find BACKUP_COMPONENTS node
Reason: An error occurred while attempting to find the BACKUP_COMPONENTS node from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC5064E (USVSS) Can't get BACKUP_COMPONENTS node
Reason: An error occurred while attempting to get the BACKUP_COMPONENTS node from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC5065E (USVSS) Can't initialize for restore
Reason: An error occurred while attempting to initialize the Backup Components interface for restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC5066E (USVSS) Can't set restore state
Reason: An error occurred while attempting set the restore state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5067E (USVSS) Can't update expanded user spec info
Reason: An error occurred while attempting to update the expanded user spec info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5068E (USVSS) Can't select mount point
Reason: An error occurred while attempting to select a mount point for the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5069E (USVSS) No volumes were selected
Reason: After processing all of the file specs and all of the selected components it was determined that no volumes were selected.
Action: Modify the backup file specs so that one or more volumes will be selected.
PC5070E (USVSS) A non-NTFS volume was selected for backup
Reason: A volume with a file system other than NTFS was selected for backup. This is not supported due to the lack of full support for non-NTFS volumes by VSS.
Action: Exclude all of the non-NTFS volumes from the backup.
PC5071E (USVSS) Can't get the volume exclude file specs
Reason: An error occurred while attempting to get the exclude file specs for a selected volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC5072E (USVSS) Can't set the VSS backup context
Reason: An error occurred while attempting to set the context for a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5073E (USVSS) Can't create snapshot set
Reason: An error occurred while attempting to create the volume snapshot set for a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5074E (USVSS) Can't add a component to the backup
Reason: An error occurred while attempting to add a component to a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5075E (USVSS) Can't set component backup stamp for incremental backup
Reason: An error occurred while attempting to set the backup stamp for a component for an incremental backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5076E (USVSS) Can't set component backup options
Reason: An error occurred while attempting the options for a component for a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5077E (USVSS) Can't add a volume to the backup
Reason: An error occurred while attempting to add a volume to a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5078E (USVSS) Can't set backup state
Reason: An error occurred while attempting to set the state of a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5079E (USVSS) Can't prepare for backup
Reason: An error occurred while attempting to prepare for a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5080E (USVSS) Can't wait for VSS to prepare for backup
Reason: An error occurred while waiting for VSS to prepare the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5081E (USVSS) Can't verify writer statuses
Reason: While verifying the statuses of the writers involved in a VSS operation, either an error occurred while getting the writer statuses or one or more of the writers returned a bad status.
Action: Check the Event Logs for more information.
PC5082E (USVSS) Can't perform snapshot
Reason: An error occurred while attempting to actually perform the snapshot of the volumes selected for a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5083E (USVSS) Can't wait for VSS to perform the snapshot
Reason: An error occurred while waiting for VSS to perform the snapshot of the volumes selected for backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5084E (USVSS) Can't get volume snapshot properties
Reason: An error occurred while attempting to get the properties for the snapshot of a volume selected for backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5085E (USVSS) Can't start a snapshot query
Reason: An error occurred while attempting to start a query of all of the snapshots in the system in order to identify the snapshots that belong to the snapshot set of a restarted backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5086E (USVSS) Can't find volume for snapshot
Reason: A snapshot was found that belongs to the snapshot set of the currently restarted backup, but the current volume for this snapshot could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC5087E (USVSS) Can't get restore target
Reason: An error occurred while attempting to get the restore target for a component that was selected to be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC5088E (USVSS) Can't get number of directed targets
Reason: An error occurred while attempting to get the number of directed targets for a component that was selected to be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC5089E (USVSS) Can't get number of components
Reason: An error occurred while attempting to get the number of components that were selected for the backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5090E (USVSS) Can't get writer node
Reason: An error occurred while attempting to get a writer node from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5091E (USVSS) Can't find Components node
Reason: An error occurred while attempting to get the Components node for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5092E (USVSS) Can't get number of component nodes
Reason: An error occurred while attempting to get the number of component nodes for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5093E (USVSS) Can't get WriterName attribute
Reason: An error occurred while attempting to get the WriterName attribute for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5094E (USVSS) Can't get ClassID attribute
Reason: An error occurred while attempting to get the ClassID attribute for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5095E (USVSS) Can't get RebootRequired attribute
Reason: An error occurred while attempting to get the ReBootRequired attribute for a writer from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5096E (USVSS) Can't get component node
Reason: An error occurred while attempting to get a component node from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5097E (USVSS) Can't get ComponentName attribute
Reason: An error occurred while attempting to get the ComponentName attribute for a component from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5098E (USVSS) Can't get LogicalPath attribute
Reason: An error occurred while attempting to get the LogicalPath attribute for a component from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC5099E (USVSS) Can't get Caption attribute
Reason: An error occurred while attempting to get the Caption attribute for a component from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
Status Errors
PC5100E (Status) Error during start conversation
Action: See additional messages
PC5101E (Status) Error sending start conversation
Action: See additional messages
PC5102E (Status) Error sending status request
Action: See additional messages
PC5103E (Status) Error receiving response
Action: See additional messages
PC5104E (Status) Unexpected conversation state
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5105E (Status) Error during Confirm
Action: See additional messages.
PC5106E (Status) Error during Confirmed
Action: See additional messages.
PC5107E (Status) Error during end of conversation
Action: See additional messages.
PC5108E (Status) Error sending console response
Action: See additional messages.
IncrDB Errors
PC5150E (IncrDB) Error opening incr file for read
Action: See additional messages.
PC5151E (IncrDB) Error opening incr file for append
Action: See additional messages.
PC5152E (IncrDB) Error deleting/creating incr file
Action: See additional messages.
PC5153E (IncrDB) Error writing incr file block
Action: See additional messages.
PC5154E (IncrDB) Error reading incr file block
Action: See additional messages.
PC5155E (IncrDB) Error seeking incr file begin
Action: See additional messages.
PC5156E (IncrDB) Error deleting incr file
Action: See additional messages.
PC5157E (IncrDB) Insufficient memory
Action: Close applications or free memory.
PC5158E (IncrDB) NULL forest handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5159E (IncrDB) NULL file handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5160E (IncrDB) NULL header
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5161E (IncrDB) Corrupt incremental file (%u)
Reason: Truncated file size
Action: Re-run your full backup.
PC5162E (IncrDB) Corrupt incremental file
Reason: Invalid variable record length
Action: Re-run your full backup.
PC5163E (IncrDB) Invalid record type (0x%x)
Action: Re-run your full backup.
PC5164E (IncrDB) BAD forest handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5165E (IncrDB) Write Header NULL file handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5166E (IncrDB) Read Header NULL file handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5167E (IncrDB) Write Record NULL file handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5168E (IncrDB) Read Record NULL file handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5169W (IncrDB) Build IncrDB tree with Dummy Dir %s
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5170E (IncrDB) No handle in deleted tree list
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5171E (IncrDB) Forest not built in deleted tree list.
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5172E (IncrDB) Record too short (%u < %u)
PC5173E (IncrDB) Error building tree of segmented files:
PC5174I (IncrDB) Backing up segmented file:
PC5175E (IncrDB) Segmented files require IncrDB.
Reason: Incremental database facility must be enabled for segmented file backups.
PC5176I (IncrDB) File segmented during backup.
PC5177E (IncrDB) Error accessing segments table.
PC5178E (IncrDB) Segments missing from restore.
Reason: Some segments for the file were not restored. File may become corrupt and unusable. This is the file name and the list of missing segments:
PC5179I (IncrDB) Using IncrDB.
Reason: The use of file segmentation was specified for the backup. This requires that the Incremental DataBase (IncrDB) also be used. INCRDB will be turned on automatically.
PC5180E Not supported parameter combination.
Reason: Segmenting files when skipping building backup file is not implemented.
PC5181E (IncrDB) Retry not supported for segmented file:
PC5182E (IncrDB) Unexpected EOF in IncrDB file.
Action: Delete the .idb file and do a full.
PC5183E (IncrDB) Segmented file skipped when it shouldn't.
Reason: Segmented file was skipped because some of the segments didn't match the criteria. If you need this file restored, please restore it without skip options.
PC5184E (IncrDB) Database file is empty or corrupt.
Reason: You IncrDB file gets corrupted. Please run First Time Full backup to correct the problem.
PC5185E (IncrDB) NULL handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5186I (IncrDB) This is a sparse file won't be segmented.
PC5187I (IncrDB) This file name is too long to be segmented.
PC5188I (IncrDB) This file name has special characters.
Reason: This file name has special characters and won't be segmented.
UNIX System Errors
PC5200E (UNIX) Error occurred reading symbolic link
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5201E (UNIX) Error occurred creating symbolic link
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5202E (UNIX) Error occurred removing symbolic link
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5203E (UNIX) Statx error on symbolic link restore
Reason: A statx error occurred while attempting to restore a symbolic link. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5204E (UNIX) Can not restore symbolic link
Reason: An existing entry in the file system is not a symbolic link.
Action: Remove the existing file or directory IF AND ONLY IF you want the symbolic link to replace the existing file or directory and rerun the restore.
PC5205E (UNIX) Error resetting last access date
Reason: There was an operating system error in resetting the last access date for a file. For Solaris, this is expected for /etc/mnttab.
Action: See additional messages.
PC5206E (UNIX) Unable to get memory for w_getmntent
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5207E (UNIX) Filesystem mount entry not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5208E (UNIX) Error occurred getting mount table
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5209I (UNIX) Resolved to system path:
PC5210E (UNIX) Error creating a device file
Reason: There was an operating system error using mknod to create a BLK or CHR special file.
Action: See additional messages.
PC5211E (UNIX) Error creating a fifo
Reason: There was an operating system error using mkfifo to create a fifo.
Action: See additional messages.
PC5212E (UNIX) Error in async write
Action: See additional messages.
PC5213E (UNIX) Error in async read
Action: See additional messages.
PC5214D (UNIX) ACL support not loaded
Reason: ACL data will not get backed up. Files with ACL(s) will report errors during restore.
PC5215D (UNIX) Error obtaining ACL
PC5216D (UNIX) Error setting ACL
PC5217D (UNIX) Error setting file access and mod time
PC5218E (UNIX) Get extra data NULL handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5219E (UNIX) Put extra data NULL handle
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5220E (UNIX) Attempt to get symlink for dir
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5221D (UNIX) EA support not loaded
Reason: EA data will not get backed up. Files with EA may report errors during restore.
PC5222E (UNIX) Error obtaining extended attributes
PC5223D (UNIX) Error getting stat of source
Reason: This information is used to set the mode/owner group of the destination file
PC5224D (UNIX) Error setting mode of destination
Reason: This information is used to set the mode of the destination file
PC5225D (UNIX) Error setting owner of destination
Reason: This information is used to set the owner/group of the destination file
PC5226D (UNIX) Error setting extended attributes
PC5227I (UNIX) Using memory mapping for sparse files
Reason: You specified USSPARSEUSEMMAP to improve performance in detecting sparse data in sparse files.
PC5228E (UNIX) Insufficient memory allocating sparse buffer
Action: Free memory.
PC5229E (UNIX) Sparse read failed
PC5230E (UNIX) Sparse mapped read failed
PC5231I (UNIX) Sparse file: %s
PC5232I (UNIX) Sparse file checking disabled (USNOSPARSE set)
Host Reporting Errors
PC5300E (Host Rpt) Error allocating memory
Action: Free memory.
PC5301E (Host Rpt) Error opening file
Reason: There was an error opening the specified Storage Server reporting parameter file.
Action: See additional messages.
PC5302E (Host Rpt) Error reading parameter
Action: See additional messages.
PC5303E (Host Rpt) Error opening file
Reason: There was an error opening the specified Storage Server reporting parameter file for write.
Action: See additional messages.
PC5304E (Host Rpt) Error writing parameter
Action: See additional messages.
PC5305E (Host Rpt) User canceled Storage Server report
PC5306E (Host Rpt) Error occurred during a start conv
Action: See additional messages.
PC5307E (Host Rpt) Error occurred during send of start
PC5308E (Host Rpt) Error occurred during send of req
PC5309E (Host Rpt) Error getting result count
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5310E (Host Rpt) Error getting result string
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5311E (Host Rpt) Error occurred during send of selection
PC5312E (Host Rpt) Error occurred during receive
PC5313E (Host Rpt) Unexpected conversation state
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5314E (Host Rpt) Error occurred during a confirmed
PC5315E (Host Rpt) Error opening report file
Action: See additional messages.
PC5316E (Host Rpt) Error writing to report file
Action: See additional messages.
PC5317E (Host Rpt) Error occurred during end conversation
PC5318W (Host Rpt) No information matched criteria
Action: Respecify.
PC5319E (Host Rpt) Error allocating memory
Action: Free memory.
PC5320E (Host Rpt) Error allocating memory
Action: Free memory.
PC5321I (Host Rpt) Report generation succeeded
PC5322E (Host Rpt) Report generation failed
PC5323I (Host Rpt) Requesting host report
PC5324I (Host Rpt) Director report '%s' to %s
PC5325E (Host Rpt) Error opening Director report file hostrpt.ini
PC5326E (Host Rpt) Error reading Director report file
PC5327E (Host Rpt) HOSTFILENAME must specify the saved report
PC5328E (Host Rpt) Report name %s not found in Director report list
PC5329E (Host Rpt) Insufficient memory
PC5330E (Host Rpt) Missing main clause
Reason: Rebuild your saved report
PC5331E (Host Rpt) Bad B0 clause
Reason: Rebuild your saved report
PC5332D (Host Rpt) Report successful %u lines written
PC5333I (Host Rpt) %u lines transmitted
PC5334I (Host Rpt) %u lines transmitted
Personalization Errors
PC5400E (Per) Personaliziation file not found
Reason: For UPSTREAM, the personalization file is US.SER and must be found either in the Work Path or in the UPSTREAM directory; in USCFG, the specified file was not found.
Action: You may be able to copy USSER to US.SER.
PC5401E (Per) Error reading the personalization file
Action: See additional messages.
PC5402E (Per) Personalization illegally modified
Action: Reload UPSTREAM from original media.
PC5403E (Per) Error in access
Action: Reload UPSTREAM from original media.
PC5404E (Per) Error in access
Action: Reload UPSTREAM from original media.
PC5405E (Per) Error in access
Action: Reload UPSTREAM from original media.
PC5406E (Per) Error in access
Action: Reload UPSTREAM from original media.
PC5407E (Per) Error writing to the personalization file
Action: See additional messages.
PC5408E (Per) Error opening ZAP file
Action: See additional messages.
PC5409E (Per) Error reading ZAP file
Action: See additional messages.
PC5410E (Per) Error opening personalization file
Reason: The personalization file could not be opened. For UPSTREAM this is fatal - for USCFG, specify a different file.
Action: See additional messages.
PC5411E (Per) Error reading personalization file
Action: Reload UPSTREAM from original media.
PC5412E (Per) Error reading personalization file
Action: Reload UPSTREAM from original media.
PC5413E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5414E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5415E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5416E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5417E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5418E (Per) Corrupted personalization file
Action: Reload UPSTREAM from original media.
PC5419E (Per) Insufficient memory
Action: Close applications or free memory.
PC5420E (Per) Insufficient memory
Action: Close applications or free memory.
PC5421E (Per) Error writing to the personalization file
Action: See additional messages.
PC5422E (Per) Error writing to the personalization file
Action: See additional messages.
PC5423E (Per) Missing systems record
Action: Contact FDR/UPSTREAM Tech Support.
PC5424E (Per) Missing user record
Action: Contact FDR/UPSTREAM Tech Support.
PC5425E (Per) Error writing to the personalization file
Action: See additional messages.
PC5426E (Per) Error reading personalization file
Action: Contact FDR/UPSTREAM Tech Support.
PC5427E (Per) Error reading personalization file
Action: Contact FDR/UPSTREAM Tech Support.
PC5428E (Per) Invalid profile, you specified %s, not %s
Reason: This machine has been personalized with a fixed backup profile and you must specify only it.
Action: Respecify
PC5450E (Per) Invalid personalization
Action: Contact FDR/UPSTREAM Tech Support.
PC5451E (Per) Backups disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5452E (Per) Restores disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5453E (Per) As of...Restores disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5454E (Per) Performance tests disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5455E (Per) Remote requests disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5456E (Per) Profile management disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5457E (Per) Profile configuration disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5458E (Per) Host status disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5459E (Per) Host reporting disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5464E (Per) Migration Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5465E (Per) Deletion Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5466E (Per) Non-merge backups Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5467E (Per) Merge backups Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5468E (Per) TCP/IP Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5469E (Per) SNA Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5470E (Per) Sequential disk backups Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5471E (Per) Sequential tape backups Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5472E (Per) Sequential disk restores Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5473E (Per) Sequential tape restores Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5474E (Per) Backups Disallowed at this time
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5475E (Per) Restores Disallowed at this time
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5476E (Per) Password failed
Reason: The user entered an incorrect password and/or chose not to run UPSTREAM at this time.
PC5477E (Per) The specification is not allowed
Reason: The file specification (which follows) is not allowed for your copy of UPSTREAM.
Action: Contact your FDR/UPSTREAM administrator.
PC5478E (Per) Attended operations Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5479E (Per) Unattended operations Disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5480E (Per) Sequential backups disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5481E (Per) Non-sequential backups disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5482E (Per) File transfers disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5483E (Per) Host jobs disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5484E (Per) FDRSOS functions disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5485E (Per) Destinations disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5486E (Per) Physical disk access disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5487E (Per) User name override disallowed
Reason: Your copy of UPSTREAM has specifically disallowed this function.
Action: Contact your FDR/UPSTREAM administrator.
PC5488E (Per) Restore file fail rename disallowed
Reason: You must enable this function using personalization to use it.
Action: Contact your FDR/UPSTREAM administrator.
Target Name Errors
PC5501E Error starting conversation
Reason: There was an error starting a conversation to inform the Storage Server of your target name.
Action: See communications return codes.
PC5502E Error allocating memory.
Reason: There was an error allocating memory to inform the Storage Server of your target name.
Action: Free memory or disk.
PC5503E Error sending target name info.
Reason: There was an error sending the target name information to the Storage Server.
Action: See communications return codes.
PC5504E Error in confirm of target name.
Reason: There was an error confirming the transmission of the target name information to the Storage Server.
Action: See communications return codes.
PC5505E Error ending conversion of target name.
Reason: There was an error ending the conversation of the transmission of the target name to the Storage Server.
Action: See communications return codes.
PC5506I Registered to the Storage Server:
PC5507E Error sending target name start conversation
Reason: There was a communications error sending the start conversation record to the Storage Server.
Action: See communications return codes.
PC5508E Error receiving workstation information
Reason: There was a communications error receiving the requested workstation information from the Storage Server.
Action: See communications return codes.
PC5509D Automatic update
Reason: The local machine received an automatic update indication from the Storage Server. When terminating or idle, the automatic update will proceed.
PC5510D Running Automatic Update
Reason: The following UPSTREAM control file (.dat) is being executed (usually a restore) as part of the automatic update process. If you press the CANCEL button, the auto-update will be skipped.
PC5511D Running Automatic Update
Reason: The following UPSTREAM job (batch file or script) is being executed (usually a restore) as part of the automatic update process. If you press the CANCEL button, the auto-update process will be skipped.
PC5515E Auto-update parameter file error
Action: See additional messages.
PC5519E Error saving parameters
Reason: When attempting to automatically update, there was an error saving the existing parameters.
Action: See additional messages.
PC5520E Error restoring parameters
Reason: When attempting to restore parameters after an automatic update.
Action: See additional messages.
PC5521D User requested skip of auto-update
PC5522E Occurred during registration
PC5523E Occurred during registration
PC5524E Error in memory allocation
Reason: Memory allocation error while receiving the list of registered names.
Action: Close applications or free memory.
PC5525D Storage server: %s
PC5526D Connecting to master server %s to build tape map table
PC5527D Error setting remote system as Reservoir
UNIX System Restore errors
PC5575E You must select a version to restore.
Inquiry/Restore Errors
PC5600W Error deleting file inquiry file
Reason: There was a file system error deleting the file used to store inquired files information.
Action: See additional messages.
PC5601E Error opening inquiry file
Action: See additional messages.
PC5602E Error reading inquiry file
Action: See additional messages.
PC5603E Unexpected EOF in inquiry file
Action: Contact FDR/UPSTREAM Tech Support.
PC5604E Error deleting inquiry file
Action: See additional messages.
PC5605E Error writing inquiry file
Action: See additional messages.
PC5606E UNIX file system
Reason: You can not perform an inquiry of a UNIX backup from a PC.
Action: Inquire from a UNIX system.
PC5607E PC file system
Reason: You can not perform an inquiry of a PC backup from a UNIX system.
Action: Inquire from a PC.
PC5608D UNIX file skipped
Action: You must delete these from a UNIX system.
PC5609D PC file skipped
Action: You must delete these from a PC system.
PC5610I File inquiry succeeded
PC5611E File inquiry failed
Security Validation Errors
PC5638E Insufficient memory saving STDOUT/STDERR messages
Reason: All of the messages received up until now will be logged and then the process will be terminated.
Action: Close applications or increase memory.
PC5639D Error initializing groups info
PC5640D Error setting groups info
PC5641E Insufficient memory allocating group info
PC5642D Error getting groups info
PC5643D Skipping user: %s, dir: %s
Reason: This directory was specifically excluded.
PC5644E Error opening process token
Reason: This is used to enable login.
Action: See additional messages.
PC5645E Error opening process
Reason: This is used to enable login.
Action: See additional messages.
PC5646I You are connected to a non-MVS UPSTREAM storage server, v%s on %s
PC5647E Error sending negotiation record
Action: See additional messages.
PC5648E Error receiving negotiation record
Action: See additional messages.
PC5649E Error allocating required memory
Reason: There was an error allocating memory required to process a received negotiation record.
Action: Close applications or free memory.
PC5650E Error allocating required memory
Reason: When performing security validation, there was a memory shortage.
Action: Free memory or disk and retry.
PC5651E Error starting conversation
Reason: When performing security validation, there was an error starting the conversation with the Storage Server.
Action: See the comm. return codes.
PC5652E Error sending request
Reason: When performing security validation, there was an error sending the security information.
Action: See the comm. return codes.
PC5653E Security information confirm error
Reason: If there is not a comm error, most likely there was an error with your security information.
Action: Reenter your security information.
PC5654E Error ending conversation
Reason: There was an error ending the security validation conversation.
Action: See the comm. return codes.
PC5655E Can't read STDOUT or STDERR output from pipe
Action: See Windows message above.
PC5656E Error loading crypt library.
Reason: UPSTREAM will not be able to perform local security checks
Action: See the following operating system code.
PC5657W Job output follows:
PC5658E Can't create an anonymous pipe for a program
Action: See Windows message above.
PC5659E Can't duplicate a pipe handle for a program
Action: See Windows message above.
PC5660E Remote password invalid
Reason: The password entered on the remote system is not the password personalized on the PC.
Action: Resubmit with the correct password.
PC5661E Can't set STDOUT
Action: See Windows message above.
PC5662E Can't set STDERR
Action: See Windows message above.
PC5663E Can't reset STDOUT
Action: See Windows message above.
PC5664E Can't reset STDERR
Action: See Windows message above.
PC5665E (Win32 Sec) Error logging in
Reason: There was a Windows error logging in a given local user.
Action: See Windows message above.
PC5666E (Win32 Sec) Error loading security library
Reason: There was a Windows error loading a required security library.
Action: See Windows message above.
PC5667E (Win32 Sec) Error loading security function
Reason: There was a Windows error loading a required security function.
Action: See Windows message above.
PC5668I (Sec) Logged on as the following user:
PC5669E (Win32 Sec) Error impersonating user
Action: See previous messages.
PC5670E (Win32 Sec) Privilege lookup error
Reason: There was an error looking up the following privilege's value.
Action: See Windows message.
PC5671W (Win32 Sec) Required privilege not enabled
Reason: A required privilege can not be enabled. The UPSTREAM function may fail for security reasons later.
Action: See Windows message.
PC5672E (Unix Sec) User not defined
Reason: The user that you specified is not defined in your Unix system.
Action: Specify a valid user.
PC5673E (Unix Sec) Must be root for remote logins
Reason: UPSTREAM must be running as the root user to allow remote logins.
Action: Restart UPSTREAM as root.
PC5674E (Unix Sec) Invalid password
Action: Respecify
PC5675E (Unix Sec) Error during logoff
Reason: There was an error switching back to UPSTREAM security during the logoff.
PC5676E (Unix Sec) Error during logon
Reason: There was an error switching back to the new login security during login.
PC5677E (Unix Sec) Error setting effective UID
PC5678E (Unix Sec) Error setting effective GID
PC5679E (Unix Sec) User not defined
Reason: The user that you specified is not defined in your Unix system.
Action: Specify a valid user.
PC5680E (Unix Sec) User not defined
Reason: The user that you specified is not defined in your Unix system.
Action: Specify a valid user.
PC5681E (Sec) Error during file existence check
PC5682E (Sec) Error during directory search
PC5683E (Unix Sec) User not defined
Reason: The user that you specified is not defined in your Unix system.
Action: Specify a valid user.
PC5684E (Unix Sec) Invalid password
Action: Respecify
PC5685E (Sec) Insufficient memory
Reason: There was insufficient memory to allocate a new internal security list member.
Action: Close applications or free memory.
PC5686E (Win32 Sec) Error duplicating token
Reason: There was an operating system error attempting to duplicate an existing login token.
Action: See additional messages.
PC5687E (Win32 Sec) Thread not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5688I (Sec) Reverting to the UPSTREAM user: %s
PC5689E (NT Sec) Security check failed
PC5690I (Sec) Security check successful. User: %s
PC5691E (UNIX Sec) Security check; UPSTREAM not root
PC5692E (NT Sec) Thread not found
Action: Contact FDR/UPSTREAM Tech Support.
PC5693E (NT Sec) Error restoring security
Reason: The active function may fail as a result.
Action: Contact FDR/UPSTREAM Tech Support.
PC5695E (NT Sec) Error running a job.
PC5696E (UNIX) You must be root to specify HOLDUSERDIRS
Reason: Only the root user is able to open and hold user directories.
Action: Logon as root or do not specify this option.
PC5697I (UNIX) Holding user directory %s
PC5698E (UNIX) Insufficient memory
Reason: There was insufficient memory to allocate an internal structure to hold user directory entries.
Action: Close applications or free memory.
PC5699W (UNIX) Error opening directory for HOLDUSERDIRS
Reason: During the hold user directory process, there was an error opening a specific user directory. The process will continue.
Action: See additional messages for the operating system error number and user directory.
PC5700E (UNIX) Error loading security function
Reason: UPSTREAM will not be able to perform local security checks
Action: See the following operating system code and function name.
USW2KAgt Errors
PC5801E (USW2KAgt) Can't load a DLL
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A DLL could not be loaded.
Action: Contact FDR/UPSTREAM Tech Support.
PC5802E (USW2KAgt) Can't load a DLL function
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A DLL function could not be loaded.
Action: Contact FDR/UPSTREAM Tech Support.
PC5803E (USW2KAgt) Can't open the Shares subkey
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The ...\CurrentControlSet\Services\lanmanserver\Shares key could not be opened.
Action: Contact FDR/UPSTREAM Tech Support.
PC5804E (USW2KAgt) Can't read a Shares value
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A ...\CurrentControlSet\Services\lanmanserver\Shares value could not be read.
Action: Contact FDR/UPSTREAM Tech Support.
PC5805E (USW2KAgt) Can't parse a Share value
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A ...\CurrentControlSet\Services\lanmanserver\Shares value could not be parsed.
Action: Contact FDR/UPSTREAM Tech Support.
PC5806E (USW2KAgt) Can't initialize the FRS API
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The FRS (File Replication System) API could not be initialized.
Action: Contact FDR/UPSTREAM Tech Support.
PC5807E (USW2KAgt) Can't get replication sets
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The FRS (File Replication System) API replication sets could not be read.
Action: Contact FDR/UPSTREAM Tech Support.
PC5808E (USW2KAgt) Can't enumerate replication sets
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The FRS (File Replication System) API replication sets could not be enumerated.
Action: Contact FDR/UPSTREAM Tech Support.
PC5809E (USW2KAgt) Can't get a replication set directory
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A FRS (File Replication System) API replication set directory could not be read.
Action: Contact FDR/UPSTREAM Tech Support.
PC5810E (USW2KAgt) Can't get a replication set SYSVOL status
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A FRS (File Replication System) API replication set SYSVOL status could not be read.
Action: Contact FDR/UPSTREAM Tech Support.
PC5811E (USW2KAgt) Expecting ACK record
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. USW2KAgt received a record from FDR/UPSTREAM which was not an ACK record when one was expected to end the restore of a replicated directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC5812E (USW2KAgt) Can't end replication directory restore
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A FRS (File Replication System) API replication directory restore could not be ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC5813E (USW2KAgt) Can't terminate the FRS API
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The FRS (File Replication System) API could not be terminated.
Action: Contact FDR/UPSTREAM Tech Support.
PC5814E (USW2KAgt) Can't start replication directory restore
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. A FRS (File Replication System) API replication directory restore could not be started.
Action: Contact FDR/UPSTREAM Tech Support.
PC5815E (USW2KAgt) Replication Directory not found
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The RestoreReplicationDirectory record received by USW2KAgt from FDR/UPSTREAM specified the name of a replication directory which does not exist.
Action: Contact FDR/UPSTREAM Tech Support.
PC5816E (USW2KAgt) Can't backup COM+ registration database
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The COM+ registration database could not be backed up.
Action: Contact FDR/UPSTREAM Tech Support.
PC5817E (USW2KAgt) Can't restore COM+ registration database
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The COM+ registration database could not be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC5818E (USW2KAgt) Can't get System Protected Files
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The list of system protected files could not be obtained.
Action: Contact FDR/UPSTREAM Tech Support.
PC5819E (USW2KAgt) Can't get System State Files
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The list of system state files could not be obtained.
Action: Contact FDR/UPSTREAM Tech Support.
PC5820E (USW2KAgt) Can't allocate System State Files memory
Reason: An error occurred while attempting to allocate memory to build the list of system state files.
Action: Close applications or free memory.
PC5821E (USW2KAgt) Can't create the SystemStateFiles key
Reason: An error occurred while creating the SystemStateFiles key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC5822E (USW2KAgt) Can't write SystemStateFiles FileNames value
Reason: An error occurred while writing the FileNames value of the SystemStateFiles key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC5823E (USW2KAgt) Can't open a file
Reason: An error occurred while attempting to open a regular file system file for processing by one of the SysState PlugIns.
Action: Contact FDR/UPSTREAM Tech Support.
PC5824E (USW2KAgt) Can't read a SysState virtual file
Reason: An error occurred while attempting to read a regular file system file that is being processed by on of the SysState PlugIns.
Action: Contact FDR/UPSTREAM Tech Support.
PC5825E (USW2KAgt) Can't write a SysState virtual file
Reason: An error occurred while attempting to write a regular file system file that is being processed by on of the SysState PlugIns.
Action: Contact FDR/UPSTREAM Tech Support.
PC5826E (USW2KAgt) Can't get a SysState virtual file size
Reason: An error occurred while attempting to compute the size of one of the PlugIn virtual files which is part of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5827E (USW2KAgt) Can't find SysState virtual file PlugIn
Reason: An error occurred while attempting to open one of the PlugIn virtual files which is part of the system state. The PlugIn for the virtual file could not be determined.
Action: If the virtual file listed above is the WinAD\WinAD.bin file, make sure that the machine was booted into Directory Services Repair Mode (DSRM) before the restore was started. If the machine was booted into DSRM, contact FDR/UPSTREAM Tech Support.
PC5828E (USW2KAgt) Can't open a SysState virtual file
Reason: An error occurred while attempting to open one of the PlugIn virtual files which is part of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5829E (USW2KAgt) Can't read a SysState virtual file
Reason: An error occurred while attempting to read one of the PlugIn virtual files which is part of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5830E (USW2KAgt) Can't write a SysState virtual file
Reason: An error occurred while attempting to write one of the PlugIn virtual files which is part of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5831E (USW2KAgt) Unknown file error
Reason: An unknown error occurred while processing one of the PlugIn virtual files which is part of the system state.
Action: See additional messages. Contact FDR/UPSTREAM Tech Support.
PC5832E (USW2KAgt) Received an invalid record
Reason: An invalid record was received by the client while processing a restore of one of the PlugIn virtual files which is part of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5833E (USW2KAgt) Can't get SysState virtual file size
Reason: An error occurred while attempting to calculate the size of one of the SysState PlugIn virtual files which is part of the system state. The file name listed on the (5833,1) line above will not be backed up.
Action: Contact FDR/UPSTREAM Tech Support.
PC5834E (USW2KAgt) Restore discontinued by PlugIn
Reason: While processing the restore of the PlugIn virtual files which are part of the system state, one or more of the PlugIns discontinued the restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC5835E (USW2KAgt) SysState PlugIn not loaded
Reason: One or more of the PlugIns required to backup or restore one of the components of the system state were not loaded.
Action: Contact FDR/UPSTREAM Tech Support.
PC5836E (USW2KAgt) Expecting a Boolean record
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. USW2KAgt received a record from FDR/UPSTREAM which was not a Boolean record when one was expected to end the backup or restore of the system state.
Action: Contact FDR/UPSTREAM Tech Support.
PC5837E (USW2KAgt) Can't shutdown the computer
Reason: An error occurred while attempting to shutdown the computer.
Action: Contact FDR/UPSTREAM Tech Support.
PC5838E (USW2KAgt) Can't enable the Shutdown privilege
Reason: An error occurred while attempting to enable the shutdown privilege in preparation for shutting down the computer.
Action: Make sure the account under which US.exe is run has the Shutdown the System privilege.
PC5839E (USW2KAgt) Can't write SystemStateFiles MaximumFileNameLength value
Reason: An error occurred while writing the MaximumFileNameLength value of the SystemStateFiles key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC5840E (USW2KAgt) Can't write SystemStateFiles NumberOfFileNames value
Reason: An error occurred while writing the NumberOfFileNames value of the SystemStateFiles key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC5841E (USW2KAgt) Can't acquire System State access
Reason: An error occurred while attempting to access the system state. This is most likely caused by another system state backup or restore which is in progress. The system state can be accessed by only one backup or restore at a time.
Action: Contact FDR/UPSTREAM Tech Support.
PC5842E (USW2KAgt) Can't schedule COM+ registration database restore
Reason: An error occurred in the FDR/UPSTREAM Windows Agent service on the server name listed above. The COM+ registration database restore operation could not be run in ASR Recovery mode and the operation could not be scheduled to be run at the next reboot.
Action: Contact FDR/UPSTREAM Tech Support.
PC5843E (USW2KAgt) The operating system is not Windows XP
Reason: A request was made to the FDR/UPSTREAM Windows Agent service to create the ASR files, but the operating system is not Windows XP or above.
Action: Contact FDR/UPSTREAM Tech Support.
PC5844E (USW2KAgt) Can't get critical volumes
Reason: An error occurred while preparing to create the ASR state file. The list of critical volumes could not be determined. Refer to the event log for more information.
Action: Contact FDR/UPSTREAM Tech Support.
PC5845E (USW2KAgt) Can't create ASR state file
Reason: An error occurred while attempting to create the ASR state file. This may happen if you are attempting to back up a 64-bit Windows system with the 32-bit version of the FDR/UPSTREAM Client.
Action: Reboot the computer and try the backup again. If this fails, create a USEnv.dat file in the UPSTREAM directory and add the line "USNOASR=Y". Or contact FDR/UPSTREAM Tech Support.
PC5846E (USW2KAgt) Can't add sif entry
Reason: An error occurred while attempting to add a command to the ASR state file.
Action: Contact FDR/UPSTREAM Tech Support.
PC5847E (USW2KAgt) Can't build USASR.key file
Reason: An error occurred while building the USASR.key file.
Action: Contact FDR/UPSTREAM Tech Support.
PC5848E (USW2KAgt) Can't get a volume name
Reason: An error occurred while attempting to get the volume name for a drive. The most likely cause for this error is that your file specification references a remote drive that UPSTREAM cannot resolve while running as a service under the LocalSystem account.
Action: Check your file specification and contact FDR/UPSTREAM Tech Support if the file specification is correct.
PC5849E (USW2KAgt) Can't backup TLS database
Reason: An error occurred while attempting to backup the Terminal Service Licensing Server (TLS) database.
Action: Contact FDR/UPSTREAM Tech Support.
PC5850E (USW2KAgt) Can't restore TLS database
Reason: An error occurred while attempting to restore the Terminal Service Licensing Server (TLS) database.
Action: Contact FDR/UPSTREAM Tech Support.
PC5851E (USW2KAgt) Can't backup IIS metabase
Reason: An error occurred while attempting to backup the Internat Information Service (IIS) metabase.
Action: Contact FDR/UPSTREAM Tech Support.
PC5852E (USW2KAgt) Can't restore IIS metabase
Reason: An error occurred while attempting to restore the Internat Information Service (IIS) metabase.
Action: Contact FDR/UPSTREAM Tech Support.
PC5853E (USW2KAgt) Can't backup WMI repository
Reason: An error occurred while attempting to backup the Windows Management Instrumentation (WMI) repository.
Action: Contact FDR/UPSTREAM Tech Support.
PC5854E (USW2KAgt) Can't restore WMI repository
Reason: An error occurred while attempting to restore the Windows Management Instrumentation (WMI) repository.
Action: Contact FDR/UPSTREAM Tech Support.
PC5855E (USW2KAgt) Can't copy ASR boot files
Reason: An error occurred while attempting determine the boot directory which contains the ASR boot files.
Action: Contact FDR/UPSTREAM Tech Support.
PC5856E (USW2KAgt) Can't copy ASR boot file
Reason: An error occurred while copying or creating an ASR boot file.
Action: Contact FDR/UPSTREAM Tech Support.
PC5857E (USW2KAgt) Can't allocate drive characters
Reason: A set of one or more local drive characters to be used for internal purposes by an UPSTREAM client could not be allocated.
Action: Contact FDR/UPSTREAM Tech Support.
PC5858E (USW2KAgt) Can't get VSS info
Reason: An error occurred while attempting to get the VSS info.
Action: Contact FDR/UPSTREAM Tech Support.
PC5859E (USW2KAgt) Can't start a VSS backup
Reason: An error occurred while attempting to start a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5860E (USW2KAgt) Can't restart a VSS backup
Reason: An error occurred while attempting to restart a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5861E (USW2KAgt) Can't start a VSS volume restore
Reason: An error occurred while attempting to start a VSS volume restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC5862E (USW2KAgt) Can't start a VSS component restore
Reason: An error occurred while attempting to start a VSS component restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC5863E (USW2KAgt) Can't end a VSS backup request
Reason: An error occurred while attempting to end a VSS backup reuest.
Action: Contact FDR/UPSTREAM Tech Support.
PC5864E (USW2KAgt) Invalid backup end request
Reason: While attempting to end a VSS backup request an invalid record was received from the UPSTREAM client. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5865E (USW2KAgt) Can't end a VSS restore request
Reason: An error occurred while attempting to end a VSS restore request.
Action: Contact FDR/UPSTREAM Tech Support.
PC5866E (USW2KAgt) Invalid restore end request
Reason: While attempting to end a VSS restore request an invalid record was received from the UPSTREAM client. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5867E (USW2KAgt) Can't set volume hard link FRN
Reason: An error occurred while attempting to mark a hard linked file as belonging to a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC5868E (USW2KAgt) Can't set component succeeded
Reason: An error occurred while attempting to set the successful status for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC5869E (USW2KAgt) Can't recreate WinSS files
Reason: An error occurred while attempting to recreate the WinSS files after completing the component backup stage of a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC5870E (USW2KAgt) Can't delete snapshot set
Reason: An error occurred while attempting to delete a snapshot set.
Action: Contact FDR/UPSTREAM Tech Support.
PC5871E (USW2KAgt) Can't check version
Reason: An error occurred while attempting to check to see if the cached WinSS.xml file is for the requested version.
Action: Contact FDR/UPSTREAM Tech Support.
PC5872E (USW2KAgt) Can't rename file at reboot
Reason: An error occurred while attempting to record a set of file rename operations for a file to be renamed at the next system reboot.
Action: Contact FDR/UPSTREAM Tech Support.
PC5873E (USW2KAgt) Can't allocate a user spec info array
Reason: While attempting to allocate memory for a user spec info array, there was insufficient memory.
Action: Close applications or free memory.
PC5874E (USW2KAgt) Record is not a VSSInfo record
Reason: An internal error occurred. A record received from the UPSTREAM client is not a VSSInfo record as expected.
Action: Contact FDR/UPSTREAM Tech Support.
PC5875E (USW2KAgt) Record is not a VSSInfo user spec record
Reason: An internal error occurred. A record received from the UPSTREAM client is not a VSSInfo user spec record as expected.
Action: Contact FDR/UPSTREAM Tech Support.
PC5876E (USW2KAgt) Can't end a VSS get info request
Reason: An error occurred while attempting to end a VSS get info request.
Action: Contact FDR/UPSTREAM Tech Support.
PC5877E (USW2KAgt) Invalid get info end request
Reason: While attempting to end a VSS get info request an invalid record was received from the UPSTREAM client. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5878E (USW2KAgt) Can't set volume mount point
Reason: While attempting to create a volume mount point an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC5879E (USW2KAgt) Component verification failed
Reason: While verifying the files for the components included in a snapshot (WinSS PlugIn) backup, one or more of the components' files failed verification.
Action: See additional messages.
PC5880E (USW2KAgt) Can't allocate a writer options array
Reason: While attempting to allocate memory for a writer options array, there was insufficient memory.
Action: Close applications or free memory.
PC5881E (USW2KAgt) Record is not a VSSInfo writer options record
Reason: An internal error occurred. A record received from the UPSTREAM client is not a VSSInfo writer options record as expected.
Action: Contact FDR/UPSTREAM Tech Support.
PC5891E (USW2KAgt) Can't send file information
Reason: While attempting to send the full set of file information for a backup from the Agent to the Client, an error occurred
Action: See additional messages.
Local Backup Errors
PC5901E (Lcl Bkp) Error deleting backup file
Reason: There was a file system error deleting the following backup file.
Action: See additional messages.
PC5902E (Lcl Bkp) Error allocating memory
Reason: There was a memory shortage allocating the internal local backup memory area.
Action: Free memory or disk.
PC5903E (Lcl Bkp) Error opening local backup file
Action: See additional messages.
PC5904E (Lcl Bkp) Error writing backup description
Action: See additional messages.
PC5905E (Lcl Bkp) Write header out of order
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5906E (Lcl Bkp) Read record out of order
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5907E (Lcl Bkp) Record read exceeds buffer
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5908E (Lcl Bkp) Error reading header
Action: See additional messages.
PC5909E (Lcl Bkp) Write record out of order
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5910W (Lcl Bkp) Error writing a local backup record
Reason: UPSTREAM will save the local backup "as is".
PC5911E (Lcl Bkp) Find file out of order
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5912E (Lcl Bkp) Error reading record
Reason: There was an error doing a sequential search for a given record. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5913E (Lcl Bkp) Unexpected end of file
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5914E (Lcl Bkp) Error reading record
Reason: There was an error doing a direct search for a given record. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5915E (Lcl Bkp) Expected file not found
Reason: The following file was not found at the given location. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5916E (Lcl Bkp) Corrupted data
Reason: A record read was not a file info record (as required). This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5917E (Lcl Bkp) Exceeded record
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5918E (Lcl Bkp) Local backup isn't restartable
Reason: A consistency error was detected in the local backup file. This file will be deleted.
PC5919E (Lcl Bkp) Restore out of order
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC5920E (Lcl Bkp) Error updating the file header
Action: See additional messages.
PC5921E (Lcl Bkp) Error reading counter file
Reason: There was an error reading the local backup counter file (profile name.000).
Action: See additional messages.
PC5922E (Lcl Bkp) Error opening local backup source
Reason: During a local backup copy, there was an error opening the source file.
Action: See additional messages.
PC5923E (Lcl Bkp) Error opening local backup dest
Reason: During a local backup copy, there was an error opening the destination file.
Action: See additional messages.
PC5924E (Lcl Bkp) Error reading local backup source
Reason: During a local backup copy, there was an error reading the source file.
Action: See additional messages.
PC5925E (Lcl Bkp) Error writing local backup dest
Reason: During a local backup copy, there was an error writing the destination file.
Action: See additional messages.
PC5926E (Lcl Bkp) Error deleting the local backup file
Reason: There was an error deleting the local backup file when the local backup directory was changed.
Action: See additional messages.
File Transfer Errors
PC6001E (File Xfer) Wildcards not allowed
Reason: You can not specify more than one file in a file transfer request.
Action: Respecify.
PC6002E (File Xfer) Record packing required
Reason: You must enable record packing to use file transfer.
Action: Set the parameter PACKRECSIZE to a non- zero value.
Host Job Submission Errors
PC6100E Error allocating memory
Reason: There was an error allocating memory for Storage Server job submission.
Action: Free memory or restart program.
PC6101E Error during start conversation error
Reason: There was an error during Storage Server job submission
Action: See additional messages.
PC6102E Error sending start conversation
Action: See additional messages.
PC6103E Error sending non-repeated description
Action: See additional messages.
PC6104E Error sending repeated description
Action: See additional messages.
PC6105E Error receiving job submission info
Action: See additional messages.
PC6106E Error in confirmed of Storage Server job
Action: See additional messages.
PC6107E Error ending conversation
Action: See additional messages.
PC6108I Submitting existing Storage Server job
PC6109D Host job submitted
PC6110I Host job submission failed
UPSTREAM/SOS Integration Errors
PC6200D Error creating SOS file
Reason: Could not create the SOS timestamp file. SOS restores will have to be performed manually.
Action: See additional messages.
PC6201D Could not find the SOS file
Reason: Expected the SOS file and it was not found.
Action: Verify the SOS Timestamp Path. If you removed the file, you will have to restore it.
PC6202E Expected SOS timestamp file spec
Reason: There were no SOS capable file specifications.
Action: Respecify the restore.
FDRSOS - Raw Disk Errors
PC6400E (Raw Disk) Bad disk name Use PC/UNIX name
Reason: You specified a raw disk access type not valid for your operating system.
Action: Specify the name as displayed on the PC/UNIX UPSTREAM disk display screens. For PCs: 1,{disk number}, or 2,{adapter},{targ},{LUN} (for DOS ASPI); for UNIX it's 4,{disk name}
PC6401E (Raw Disk) Read of 0 sectors not allowed
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6402E (Raw Disk) Attempt to read past end of disk
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6403E (Raw Disk) Write of 0 sectors not allowed
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6404E (Raw Disk) Attempt to write past end of disk
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6405E (Raw Disk) Error allocating memory
Reason: Insufficient memory allocating partition table memory.
Action: Free memory.
PC6406E (Raw Disk) Error allocating memory
Reason: Insufficient memory allocating a partition table list entry.
Action: Free memory.
PC6407E (Raw Disk) DPMI error
Reason: There was a DPMI error simulating a real mode interrupt.
Action: Contact FDR/UPSTREAM Tech Support.
PC6408E (Raw Disk) Not a UNIX physical disk
Reason: The received physical disk is not in the form: < or />.
Action: Respecify.
PC6409E (Raw Disk) Not PC physical disk
Reason: The received physical disk is not in the form: :\
Action: Respecify.
PC6410E (Raw Disk) Error creating file during disk search
PC6412E (Raw Disk) Async write pending
Reason: A write was requested with a pending async function still posted. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6413E (Raw Disk) Async read pending
Reason: A read was requested with a pending async function still posted. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
USVSS Errors
PC6525E (USVSS) Can't get ComponentPath attribute
Reason: An error occurred while attempting to get the ComponentPath attribute for a component from the backup data.
Action: Contact FDR/UPSTREAM Tech Support.
PC6526E (USVSS) Can't get writer and component info
Reason: An error occurred while attempting to get the writer and component information while running in USRecovery mode.
Action: Contact FDR/UPSTREAM Tech Support.
PC6527E (USVSS) Can't start volume restore
Reason: An error occurred while attempting to start a volume restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6528E (USVSS) Can't get VersionDate attribute
Reason: An error occurred while attempting to get the VersionDate attribute from a previous XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC6529E (USVSS) Can't stop writer service
Reason: An error occurred while attempting to stop a writer's service.
Action: Contact FDR/UPSTREAM Tech Support.
PC6530E (USVSS) Can't perform custom pre-restore
Reason: An error occurred while attempting to perform the custom pre-restore procedure for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC6531E (USVSS) Can't select a component for restore
Reason: An error occurred while attempting to select a component for a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6532E (USVSS) Can't set component restore options
Reason: An error occurred while attempting the options for a component for a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6533E (USVSS) Can't set additional restores
Reason: An error occurred while attempting to set the additional restores flag for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC6534E (USVSS) Can't add a component for restore
Reason: An error occurred while attempting to add a component for a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6535E (USVSS) Can't perform VSS pre-restore
Reason: An error occurred while attempting to perform the VSS pre-restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6536E (USVSS) Can't wait for VSS pre-restore
Reason: An error occurred while waiting for the VSS pre-restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6537E (USVSS) Can't get pre-restore messages
Reason: An error occurred while attempting to get the pre-restore failure messages from the writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC6538E (USVSS) VSS pre-restore failed
Reason: While attempting to perform the VSS pre-restore, it failed.
Action: Contact FDR/UPSTREAM Tech Support.
PC6539E (USVSS) Invalid number of alternate location mappings
Reason: The number of alternate location mappings for a writer is inconsistent with its restore method.
Action: Contact FDR/UPSTREAM Tech Support.
PC6540E (USVSS) Can't create file spec info array
Reason: An error occurred while attempt to create the file spec info.
Action: Contact FDR/UPSTREAM Tech Support.
PC6541E (USVSS) Can't sort file specs
Reason: An error occurred while attempting to sort the file spec info.
Action: Contact FDR/UPSTREAM Tech Support.
PC6542E (USVSS) Can't find mount point for file spec
Reason: While attempting to find the mount point for a file spec the mount point was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC6543E (USVSS) Can't check for non-restorable components
Reason: An error occurred while attempting to check for non-restorable components.
Action: Contact FDR/UPSTREAM Tech Support.
PC6544E (USVSS) Can't open directory
Reason: An error occurred while attempting to open a directory to get its non-file data.
Action: Contact FDR/UPSTREAM Tech Support.
PC6545E (USVSS) Can't read a stream header
Reason: An error occurred while attempting to read the header of a set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6546E (USVSS) Stream buffer too small
Reason: While attempting to read a set of non-file data for a directory it was found that the non-file data buffer is too small.
Action: Contact FDR/UPSTREAM Tech Support.
PC6547E (USVSS) Can't read a stream body
Reason: An error occurred while attempting to read the body of a set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6548E (USVSS) Can't finish read of streams
Reason: An error occurred while attempting to complete the read of a set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6549E (USVSS) Can't write a stream
Reason: An error occurred while attempting to write a set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6550E (USVSS) Can't finish write of streams
Reason: An error occurred while attempting to complete the write of a set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6551E (USVSS) Can't read directory streams
Reason: An error occurred while attempting to read the complete set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6552E (USVSS) Can't write directory streams
Reason: An error occurred while attempting to write the complete set of non-file data for a directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6553E (USVSS) Can't create the Volumes directory
Reason: An error occurred while attempting to create the Volumes directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6554E (USVSS) Can't create the Components directory
Reason: An error occurred while attempting to create the Components directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6555E (USVSS) Can't create a volume mount point directory
Reason: An error occurred while attempting to create a volume mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6556E (USVSS) Can't expose snapshot
Reason: An error occurred while attempting to mount a snapshot volume on a mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6557E (USVSS) Can't create volume mount point
Reason: An error occurred while attempting to mount an original volume on a mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6558E (USVSS) Can't create a component mount point directory
Reason: An error occurred while attempting to create a component directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6559E (USVSS) Can't create a component's volume mount point directory
Reason: An error occurred while attempting to create a volume mount point directory for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC6560E (USVSS) Can't create component directory junction
Reason: An error occurred while attempting to create a directory junction for a component's volume mount point directory to a volume mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6561E (USVSS) Can't create WinSS directory
Reason: An error occurred while attempting to create the WinSS directory.
Action: You may need to install the Microsoft Visual C++ 2012 Redistributable package. Contact FDR/UPSTREAM Tech Support for further help.
PC6562E (USVSS) Can't create WinSS directory junction
Reason: An error occurred while attempting to create a directory junction for the WinSS directory to the backup profile directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6563E (USVSS) Can't create backup profile share
Reason: An error occurred while attempting to create the UPSTREAM. share.
Action: Contact FDR/UPSTREAM Tech Support.
PC6564E (USVSS) Component verification failed
Reason: The verification process for a component failed.
Action: See additional messages and the Application Event Log.
PC6565E (USVSS) Can't create backup profile directory
Reason: An error occurred while attempting to create the backup profile directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC6566E (USVSS) Can't perform backup inquiry
Reason: An error occurred while attempting to perform an inquiry in order to specify the parameters for a backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC6567E (USVSS) Can't perform restore inquiry
Reason: An error occurred while attempting to perform an inquiry in order to specify the parameters for a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6568E (USVSS) Can't perform new backup
Reason: An error occurred while attempting to perform a new backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC6569E (USVSS) Can't perform restarted backup
Reason: An error occurred while attempting to perform a restarted backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC6570E (USVSS) Can't perform volume restore
Reason: An error occurred while attempting to perform a volume restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6571E (USVSS) Can't perform component restore
Reason: An error occurred while attempting to perform a component restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6572E (USVSS) Invalid action
Reason: An internal UPSTREAM error occurred which caused an unknown action to be attempted.
Action: Contact FDR/UPSTREAM Tech Support.
PC6573E (USVSS) Can't create directory structure
Reason: An error occurred while attempting to create the directory structure for a backup profile.
Action: Contact FDR/UPSTREAM Tech Support.
PC6574E (USVSS) Can't set component backup status
Reason: While attempting to set the backup status of a component the component could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC6575E (USVSS) Can't recreate XML file
Reason: An error occurred while attempting to recreate the WinSS.xml file after completing the backup of the components.
Action: Contact FDR/UPSTREAM Tech Support.
PC6576E (USVSS) Can't delete snapshots
Reason: An error occurred while attempting to delete a snapshot set.
Action: Contact FDR/UPSTREAM Tech Support.
PC6577E (USVSS) Can't complete backup
Reason: An error occurred while attempting to complete a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC6578E (USVSS) Can't wait for a backup to complete
Reason: An error occurred while waiting for a VSS backup to complete.
Action: Contact FDR/UPSTREAM Tech Support.
PC6579E (USVSS) Can't abort VSS backup
Reason: An error occurred while attempting to abort a VSS backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC6580E (USVSS) Can't set component restore status
Reason: An error occurred while attempting to set the restore status for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC6581E (USVSS) Can't add alternative location mapping
Reason: An error occurred while attempting to set an alternate location mapping for a file spec for a component.
Action: Contact FDR/UPSTREAM Tech Support.
PC6582E (USVSS) Can't perform VSS post-restore
Reason: An error occurred while attempting to perform the VSS post-restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6583E (USVSS) Can't wait for VSS post-restore
Reason: An error occurred while waiting for the VSS post-restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC6584E (USVSS) Can't get post-restore messages
Reason: An error occurred while attempting to get the post-restore failure messages from the writers.
Action: Contact FDR/UPSTREAM Tech Support.
PC6585E (USVSS) VSS post-restore failed
Reason: While attempting to perform the VSS post-restore, it failed.
Action: Contact FDR/UPSTREAM Tech Support.
PC6586E (USVSS) Can't perform custom post-restore
Reason: An error occurred while attempting to perform the custom post-restore procedure for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC6587E (USVSS) Can't perform custom end-restore
Reason: An error occurred while attempting to perform the custom end-restore procedure for a writer.
Action: Contact FDR/UPSTREAM Tech Support.
PC6588E (USVSS) Can't start writer service
Reason: An error occurred while attempting to start a writer's service.
Action: Contact FDR/UPSTREAM Tech Support.
PC6589E (USVSS) Can't recreate mount point reparse point
Reason: An error occurred while attempting to recreate a mount point reparse point for a snapshot volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC6590E (USVSS) Can't find explicitly selected component
Reason: An error occurred while attempting to find an explicitly selected for backup component.
Action: Contact FDR/UPSTREAM Tech Support.
PC6591E (USVSS) Can't load a DLL
Reason: An error occurred while attempting to load a DLL file.
Action: Contact FDR/UPSTREAM Tech Support.
PC6592E (USVSS) Can't get entry point address
Reason: An error occurred while attempting to get the address of an entry point.
Action: Contact FDR/UPSTREAM Tech Support.
PC6593E (USVSS) Can't set BackupType attribute
Reason: An error occurred while attempting to set a component BackupType attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC6594E (USVSS) Can't set BackupType value
Reason: An error occurred while attempting to set a component BackupType registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC6595E (USVSS) Can't get BackupType
Reason: An error occurred while attempting to get a BackupType attribute for a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC6596E (USVSS) Can't get MountPointVolumeName
Reason: An error occurred while attempting to get the MountPointVolumeName attribute for a volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC6597E (USVSS) Can't set MountPointVolumeName attribute
Reason: An error occurred while attempting to set a volume MountPointVolumeName attribute in a XML document.
Action: Contact FDR/UPSTREAM Tech Support.
PC6598E (USVSS) Can't set MountPointVolumeName value
Reason: An error occurred while attempting to set a volume MountPointVolumeName registry value.
Action: Contact FDR/UPSTREAM Tech Support.
PC6599E (USVSS) Can't get reparse data mount point volume name
Reason: An error occurred while attempting to get the name of a mount point volume from the reparse data of a mount point directory.
Action: Contact FDR/UPSTREAM Tech Support.
NTDisk Errors
PC6700E (NTDisk) Invalid access type
Reason: While parsing the location information, the access type was invalid.
Action: Respecify the location.
PC6701E (NTDisk) Required field missing
Reason: While parsing the location information, a required sub-field was missing.
Action: Respecify the location.
PC6702E (NTDisk) Disk not found
Reason: This message may be reported for a physical disk backup/restore or a FDRSOS local backup/restore.
Action: Respecify the location with a valid disk or disable FDRSOS Local Backups.
PC6703E (NTDisk) OS error
Reason: There was an OS error when opening the disk.
Action: Contact FDR/UPSTREAM Tech Support.
PC6704E (NTDisk) Disk position error
Reason: There was an error in the generated values for the disk read/write. Often caused by invalid BIOS or other system values.
Action: Contact FDR/UPSTREAM Tech Support.
PC6705E (NTDisk) OS error in read/write
Action: Contact FDR/UPSTREAM Tech Support.
PC6706E (NTDisk) Incomplete read
Reason: The expected number of sectors were not read.
Action: Contact FDR/UPSTREAM Tech Support.
PC6707E (NTDisk) OS error
Reason: There was an OS error when getting disk statistics.
Action: Contact FDR/UPSTREAM Tech Support.
PC6708E (NTDisk) OS error
Reason: There was an OS error while setting the file access location.
Action: Contact FDR/UPSTREAM Tech Support.
PC6709E (NTDisk) OS error
Reason: There was an OS error while flushing written data to disk.
Action: Contact FDR/UPSTREAM Tech Support.
PC6710E (NTDisk) OS error
Reason: There was an OS error when creating the event structure for asynchronous operations.
Action: Contact FDR/UPSTREAM Tech Support. or disable async support by setting the USRAWNOOVERLAP environment variable to any value.
PC6711E (NTDisk) OS error
Reason: There was an OS error when resetting the event structure for asynchronous operations.
Action: Contact FDR/UPSTREAM Tech Support. or disable async support by setting the USRAWNOOVERLAP environment variable to any value.
PC6712E (NTDisk) OS error
Reason: There was an OS error when performing asynch I/O.
Action: Contact FDR/UPSTREAM Tech Support. or disable async support by setting the USRAWNOOVERLAP environment variable to any value.
PC6713E (NTDisk) OS error
Reason: There was an OS error when checking the status of a asynchronous operation.
Action: Contact FDR/UPSTREAM Tech Support. or disable async support by setting the USRAWNOOVERLAP environment variable to any value.
PC6714E (NTDisk) OS error
Reason: There was an OS error when checking the completion status of a asynchronous operation.
Action: Contact FDR/UPSTREAM Tech Support. or disable async support by setting the USRAWNOOVERLAP environment variable to any value.
PC6715E (NTDisk) Size mismatch
Reason: Expecting a given size, the I/O reported a differing size. It also occurred in an unexpected location.
Action: Contact FDR/UPSTREAM Tech Support.
PC6716E (NTDisk) Size mismatch
Reason: Expecting a given size, the I/O reported a differing size.
Action: Contact FDR/UPSTREAM Tech Support.
PC6717E (NTDisk) Insufficient memory
Reason: Insufficient memory allocating the disk list buffer
Action: Close applications or free memory.
PC6718E (NTDisk) Error querying list of devices
PC6900I FDRSOS restore started
PC6901D FDRSOS restore completed successfully
PC6902D FDRSOS restore completed with errors
PC6903D FDRSOS restore suspended by user
PC6904I Restarting an FDRSOS restore
PC6905D Restarted FDRSOS restore successful
PC6906D Restarted FDRSOS restore completed with errors
PC6910E During a FDRSOS restore start
PC6911E During a FDRSOS restore send description
PC6912E During a FDRSOS restore receive desc
PC6913E During a FDRSOS restore receive file
PC6914E During a FDRSOS restore confirmed
PC6915E During a FDRSOS restore end
PC6920I Adjusted record size
Reason: Record sizes must be a multiple of 4096.
Action: Respecify.
PC6921E Record packing size invalid
Reason: You must enable record packing (PACKRECSIZE non zero) and specify it to be larger than the record size.
Action: Respecify.
PC6922E Insufficient memory
Reason: There was insufficient memory allocating a buffer for a raw disk restore.
Action: Free memory.
PC6923E Too many file specifications
Reason: For an FDRSOS restore you can only have one file specification.
Action: Respecify.
PC6924E Unknown type
Reason: During an FDRSOS restore, an unexpected type was received. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6925E Unexpected conversation state
Reason: During an FDRSOS restore, the system entered an conversation state other than receive or confirm. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6926E Insufficient memory
Reason: There was insufficient memory allocating a raw disk handle buffer for a raw disk restore.
Action: Free memory.
PC6927E Compression initialization error
Action: See additional messages.
PC6928E Fast decompression error
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6929E High decompression error
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6930E Buffer overwrite
Reason: For Windows environments, record packing is required.
Action: Enable record packing
PC6931E Unwritten data
Reason: After high decompression, there was remaining data (not a multiple of 512) in the buffer. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6932E User suspended physical disk restore
PC6933D Restored from an FDRSOS backup
PC6934E Bad file name
Reason: The received file name had an invalid format. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6935E Error saving your original parameters
Reason: During a restart, there was an error saving your original parameters.
Action: See additional messages.
PC6936E Error reading restart information
Reason: There was an error reading the restart info.
Action: See additional messages.
PC6937E Error reading restart parameters
Reason: There was an error reading the restart info.
Action: See additional messages.
PC6938E Restore not completely started
Reason: This restore did not run long enough to be restartable.
Action: Restart manually.
PC6939E Error sending restarted restore
Action: Look up the communications error.
PC6940E Restart file bad
Reason: The last successful file received from the Storage Server has an invalid format. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC6941E Error writing restart starting point.
PC6942E Error saving restart information.
PC6943E Error writing restart info.
zLib Errors
PC6950E Error allocating z_stream
Reason: Insufficient memory
PC6951E Error: %s while initializing zlib for a file
PC6952E Error: %s while re-initializing zlib for a file
PC6953E Error: %s while compressing a file.
PC6954E Error: %s while initializing zlib for a file
PC6955E Error: %s while re-initializing zlib for a file
PC6956E Error: %s while de-compressing a file.
PC6957D zlib buffer size set to: %s
PC6958E zLib library file error loading.
PC6959E zLib function error loading.
PC6960I zLib deflation %s hardware support %s
PC6961I zLib inflation %s hardware support %s
PC6962I zLib expected hardware support but not used %s
PC6963I zEDC hardware used for %s files, %s bytes (software used for %s files %s bytes)
PC6964E zEDC required by ZLIBFAILIFNOZEDC and hardware not found
Action: You must explicitly set ZLIBFAILIFNOZEDC N if you wish to run COMPRESSLEVEL 5 without zEDC hardware support.
UPSTREAM/SOS Backup Errors
PC7000I FDRSOS backup started
PC7001D FDRSOS backup completed successfully
PC7002D FDRSOS backup completed with errors
PC7003D FDRSOS backup suspended by user
PC7004I Restarting an FDRSOS backup
PC7005D Restarted FDRSOS backup completed successfully
PC7006D Restarted FDRSOS backup completed with errors
PC7010E During a FDRSOS backup start
PC7011E During a FDRSOS backup send description
PC7012E During a FDRSOS backup receive desc
PC7013E During a FDRSOS backup receive file
PC7014E During a FDRSOS backup confirmed
PC7015E During a FDRSOS backup end
PC7020I Adjusted record size
Reason: Record sizes must be a multiple of 4096.
Action: Respecify.
PC7021E Record packing size invalid
Reason: You must enable record packing (PACKRECSIZE non zero) and specify it to be larger than the record size.
Action: Respecify.
PC7022E Insufficient memory
Reason: There was insufficient memory allocating a buffer for a raw disk backup.
Action: Free memory.
PC7023E Too many file specifications
Reason: For an FDRSOS backup you can only have one file specification.
Action: Respecify.
PC7024E Insufficient memory
Reason: There was insufficient memory allocating a raw disk handle buffer for a raw disk backup.
Action: Free memory.
PC7025E Insufficient memory
Reason: There was insufficient memory allocating a raw disk compression buffer for a raw disk backup.
Action: Free memory.
PC7026E Compression initialization error
Action: See additional messages.
PC7027E High compression error
Action: See additional messages.
PC7028E User suspended physical disk backup
PC7029E Error writing restart information
Action: See additional messages.
PC7030E Error saving restart information
Reason: There was an error saving your parameters for a later potential restart.
Action: See additional messages.
PC7031E Error writing restart information
Reason: Error occurred starting the backup.
Action: See additional messages.
PC7032E Error saving your original parameters
Reason: During a restart, there was an error saving your original parameters.
Action: See additional messages.
PC7033E Error reading restart information
Reason: There was an error reading the restart info.
Action: See additional messages.
PC7034E Error reading restart parameters
Reason: There was an error reading the restart info.
Action: See additional messages.
PC7035E Backup not completely started
Reason: This backup did not run long enough to be restartable.
Action: Restart manually.
PC7036E Error sending restarted backup
Action: Look up the communications error.
PC7037E Restart file bad
Reason: The last successful file received from the Storage Server has an invalid format. This usually occurs if a physical disk backup was not completely started.
Action: Manually restart the backup.
PC7038E Insufficient memory (Advanced compression)
PC7100E (Raw Disk-UNIX) Invalid access type
Reason: While parsing the location information, the access type was invalid.
Action: Respecify the location.
PC7101E (Raw Disk-UNIX) Required field missing
Reason: While parsing the location information, a required sub-field was missing.
Action: Respecify the location.
PC7102E (Raw Disk-UNIX) Disk not found
Reason: This message may be reported for a physical disk backup/restore or a FDRSOS local backup/restore.
Action: Respecify the location with a valid disk or disable FDRSOS Local Backups.
PC7103E (Raw Disk-UNIX) OS error
Reason: There was an OS error when opening the disk.
Action: Contact FDR/UPSTREAM Tech Support.
PC7104E (Raw Disk-UNIX) Invalid access position
Reason: Attempt to access a physical disk randomly beyond 4GB. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7105E (Raw Disk-UNIX) OS error in read/write
Action: Contact FDR/UPSTREAM Tech Support.
PC7106E (Raw Disk-UNIX) Incomplete read
Reason: The expected number of sectors were not read.
Action: Contact FDR/UPSTREAM Tech Support.
PC7107E (Raw Disk-UNIX) OS error
Reason: There was an OS error when getting disk statistics.
Action: Contact FDR/UPSTREAM Tech Support.
PC7108E (Raw Disk-UNIX) Error reading
Action: See attached UNIX error
PC7109E (Raw Disk-UNIX) You must be the root user
Reason: Access to raw disk functions requires that you be logged in as the root user.
Action: Login as the root user.
PC7110E (Raw Disk-UNIX) Error writing
Action: See attached UNIX error
PC7111E (Raw Disk-UNIX) Unexpected EOF
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7112E (Raw Disk-UNIX) Disk too large
Reason: For the version of the AIX operating system, this disk is too large (greater than 2GB).
Action: Specify another disk.
PC7113E (Raw Disk-UNIX) ioctl call failed
Reason: The ioctl call, used to determine the disk statistics for an AIX disk failed.
Action: See additional messages.
PC7114E (Raw Disk-UNIX) open failed
Reason: The device open for an AIX disk failed.
Action: See additional messages.
PC7115E (Raw Disk-UNIX) ioctl call failed
Reason: The ioctl call, used to determine the disk statistics for a Solaris disk failed.
Action: See additional messages.
PC7116E (Raw Disk-UNIX) read_vtoc call failed
Reason: The read_vtoc call, used to determine the disk statistics for a Solaris disk failed.
Action: See additional messages.
PC7117E (Raw Disk-UNIX) open failed
Reason: The device open for a Solaris disk failed.
Action: See additional messages.
PC7118E (Raw Disk-UNIX) Logical Volume
Reason: (HPUX) You specified a logical volume
Action: Respecify, specifying a physical volume.
PC7119E (Raw Disk-UNIX) Error getting capacity
Reason: (HPUX) There was an error getting the capacity of the physical volume.
Action: See additional messages.
PC7120E (Raw Disk-UNIX) Not physical volume
Reason: (HPUX) The volume you specified is not a UNIX physical volume.
Action: Respecify.
PC7121E (Raw Disk-UNIX) Error getting info
Reason: (HPUX) There was an error getting disk info of the physical volume.
Action: See additional messages.
PC7122E (Raw Disk-UNIX) open failed
Reason: The device open for a HPUX disk failed.
Action: See additional messages.
PC7123E (Raw Disk-UNIX) Error getting def partition table
Reason: (Tru64) There was an error getting the default partition table for the disk.
Action: See additional messages.
PC7124E (Raw Disk-UNIX) Error getting disk label
Reason: (Tru64) There was an error getting the disk label for the disk.
Action: See additional messages.
PC7125E (Raw Disk-UNIX) Error getting cur partition table
Reason: (Tru64) There was an error getting the current partition table for the disk.
Action: See additional messages.
PC7126E (Raw Disk-UNIX) open failed
Reason: (Tru64) The raw device open failed.
Action: See additional messages.
PC7127E (Raw Disk-UNIX) Not the c partition
Reason: (Tru64) A raw device for a partition other than c was specified.
Action: Specify a raw device for the c partition.
PC7128E (Raw Disk-UNIX) Error switching security
PC7129E (Raw Disk-UNIX) Error getting number of sectors
Reason: (Linux) The BLKGETSIZE ioctl failed.
Action: See additional messages.
PC7130E (Raw Disk-UNIX) Error opening block device
Reason: (Linux) The open for the block device bound to the raw device failed.
Action: See additional messages.
PC7131E (Raw Disk-UNIX) Raw device not properly bound
Reason: (Linux) The raw device is either not bound or bound to a device that is not a scsi disk device.
Action: Use the raw command to query the raw device.
PC7132E (Raw Disk-UNIX) Error getting binding info
Reason: (Linux) The ioctl RAW_GETBIND to obtain the device the raw device is bound to failed.
Action: See additional messages.
PC7133E (Raw Disk-UNIX) The raw control open failed
Reason: (Linux) The open of the file used for raw control operations failed.
Action: See additional messages.
PC7134E (Raw Disk-UNIX) Not a raw device file
Reason: (Linux) The major number of the device file is not the major number for a raw device.
Action: The raw device file must be recreated.
PC7135E (Raw Disk-UNIX) Raw device file not char
Reason: (Linux) The raw device file is not a character special file.
Action: The raw device file must be recreated.
PC7136I (Raw Disk-UNIX) USAIXRESERVEDISK set
PC7137I (Raw Disk-UNIX) USAIXLOCKDISK set
PC7138I (Raw Disk-UNIX) I/O is being retried (for disk %s)
PC7139E (Raw Disk-Linux) Insufficient memory (%s)
Reason: Can't save valid disk list.
Action: Close applications or free memory.
PC7140E (Raw Disk-UNIX) Character device expected and not found
Reason: This indicates a severe problem in your directory system.
Action: Have your system admin remove this device and retry
PC7141E (Raw Disk-UNIX) Stat failed
Reason: This indicates a severe problem in your directory system
Action: Examine the return code below and determine if this device should be manually deleted or repaired.
FDRSOS Local Backup Errors
PC7200E (LclSOS) Error allocating memory
Reason: Insufficent memory allocating sector memory.
Action: Free memory.
PC7201E (LclSOS) Not a FDRSOS local backup disk
Reason: There is not a FDRSOS local backup partition on the specified local disk.
Action: Initialize the disk
PC7202E (LclSOS) Not a FDRSOS local backup disk
Reason: There is not partition table on the specified disk.
Action: Initialize the disk
PC7203D (LclSOS) Partition header invalid
Reason: The FDRSOS local backup disk has been corrupted.
Action: Contact FDR/UPSTREAM Tech Support.
PC7204E (LclSOS) Profile entry bad
Reason: A profile entry was expected and invalid data was returned.
Action: Contact FDR/UPSTREAM Tech Support.
PC7205E (LclSOS) Expected profile not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7206E (LclSOS) Record size too small
Reason: The internal profile information could not be read.
Action: Increase your record size.
PC7207E (LclSOS) Range error
Reason: Either the backup number or the number of backups is larger than expected. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7208E (LclSOS) Extent table range error
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7209E (LclSOS) Profiles don't match
Reason: During an update operation, the following two profiles are required to be the same and aren't. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7210E (LclSOS) Profiles don't match
Reason: During a read operation, the following two profiles are required to be the same and aren't. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7211E (LclSOS) You tried to add an existing profile
Action: Respecify.
PC7212E (LclSOS) Too many profiles
Reason: You have exceeded the maximum number of profiles.
Action: Delete a profile.
PC7213E (LclSOS) Internal length invalid
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7214E (LclSOS) Past valid profiles
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7215E (LclSOS) Internal sizes wrong
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7216E (LclSOS) Profile not found
Reason: You selected to delete a given profile and it was not found.
Action: Respecify.
PC7217E (LclSOS) Backups exist
Reason: You selected to delete a given profile in which there are active backups defined.
Action: Use profile management to delete all active backups before deleting the profile.
PC7218E (LclSOS) Extent not allocated
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7219E (LclSOS) Exceeded space available
Reason: Your backup has exceeded the amount of space available and you configured this profile to terminate if this happened.
Action: Modify your profile or migrate/delete backups.
PC7220E (LclSOS) Profile not found
Reason: The backup profile you specified has not been configured using the "FDRSOS Local Backup Admin" facility.
Action: Configure and retry.
PC7221E (LclSOS) Backup not found
Reason: The FDR/UPSTREAM Storage Server confirmed that it had created the backup definition, but it was not found. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7222E (LclSOS) Profile not found (restart)
Reason: The backup profile you specified has not been configured using the "FDRSOS Local Backup Admin" facility or has been deleted.
Action: Configure and retry.
PC7223E (LclSOS) Unexpected end of data
Reason: While searching for the last restarted file, we read an end of data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7224E (LclSOS) Corrupt data
Reason: While searching for the last restarted file, we ran into corrupted data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7225E (LclSOS) Corrupt data (2)
Reason: While searching for the last restarted file, we ran into corrupted data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7226E (LclSOS) Backup not found
Reason: While reading the disk a given backup was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC7227E (LclSOS) Bad data on disk
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7228E (LclSOS) Record exceeds length
Reason: The disk buffer exceeds the memory buffer. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7229E (LclSOS) Error creating temporary file
Action: See additional messages.
PC7230E (LclSOS) Error writing to the temp file
Action: See additional messages.
PC7231E (LclSOS) Error reading from the temp file
Action: See additional messages.
PC7232E (LclSOS) Error reading from the temp file
Action: See additional messages.
PC7233E (LclSOS) Invalid length
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7234E (LclSOS) Too many extents
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7235E (LclSOS) Out of space
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7236E (LclSOS) Range error during backup write
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7237E (LclSOS) Backup not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7238E (LclSOS) Error reopening temp file
Action: See additional messages.
PC7239E (LclSOS) End of backup during a restart
Reason: The last file was not found on the backup. This backup is not restartable.
Action: Restart manually.
PC7240E (LclSOS) Record not written
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7241E (LclSOS) Profile not found in profile table
Action: You need to either define a backup profile using the Admin facility or allow the Storage Server to dynamically create them.
PC7242E (LclSOS) Backup started not written
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7243E (LclSOS) Unexpected end of file
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7244E (LclSOS) Expected a file info record
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7245E (LclSOS) File name mismatch
Reason: The file name on local disk does not match the file name received.
Action: Contact FDR/UPSTREAM Tech Support.
PC7246E (LclSOS) Profile not found
Reason: While beginning a restore, the specified profile was not found on the local disk.
Action: Specify the proper profile or disable local backups.
PC7247D (LclSOS) Exceeded backup size
Reason: The maximum backup size has been exceeded; remaining data will be transmitted.
PC7248D (LclSOS) No segments used
PC7249E (LclSOS) Volume greater than 2GB
Reason: You are using a version of the operating system which does not support volumes greater than 2GB for random access reads/writes.
Action: Select another disk or upgrade the OS.
PC7250E (LclSOS) VolSer not found
Action: Specify a Storage Server vol ser which exists.
PC7251I (LclSOS) %s found: %s
PC7252E (LclSOS) Error switching security context
PC7253E (LclSOS) Insufficient memory
Reason: While processing restored data, there was insufficient memory to save processed data while waiting from additional from the Storage Server.
Action: Free memory.
PC7254E (LclSOS) Internal buffer exceeded (End: %s, Stop: %s)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7255I (LclSOS) %s first found: %s
PC7256I (LclSOS) %s empty found: %s
PC7257E (LclSOS) No local backup disks found.
Reason: Disks may be locked or have been overwritten.
Action: If the disks have been overwritten, then you may need to reformat them with FDRSOS. If you are unsure, contact FDR/UPSTREAM Tech Support.
PC7258E (LclSOS) No empty local backup disks found (%u skipped)
Reason: Verify that data has not be inadventently left on the disk due to previously failed backups.
Action: Clean up disks with FDRSOS or local backup administration in the Director or UPSTREAM local.
PC7259E (LclSOS) Internal error
Action: Contact FDR/UPSTREAM Tech Support.
PC7260I (LclSOS) %s most empty found: %s
PC7261D (LclSOS) Most empty specified - no empty found.
Reason: Disks with data will be searched.
PC7262E (LclSOS) Insufficient space on disk (%s)
Action: Free space on transfer disk, decrease max size or increase min percent.
PC7263E (LclSOS) Too many extents required
Reason: This disk is too fragmented for UPSTREAM.
Action: Reformat the disk.
PC7264E (LclSOS) Too many backups for profile
Reason: A profile can hold a maximum of 255 backup versions.
Action: Delete some backups or format the disk.
PC7265E (LclSOS) Can't delete backup %s/%s
Reason: This backup was not found.
Action: This disk should be formatted to avoid fragmentation.
PC7266E (LclSOS) Invalid backup number (%u) in seek
Reason: Internal error
Action: Contact FDR/UPSTREAM Tech Support.
PC7267I (LclSOS) Allocated %u segments: %s
PC7268I (LclSOS) Re-read of data showed (timing check):
Reason: This is a diagnostic message
Action: Contact FDR/UPSTREAM Tech Support.
PC7269E (LclSOS) Bad sector %s, %s
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support
PC7270D (LclSOS) Num free segs.: %u + %u segs. freed > num segs. %u
Reason: Internal error, but UPSTREAM will self correct.
PC7271E (LclSOS) Segment sector #%u exceeds total of %u
Action: Reformat disk
PC7272E (LclSOS) Expected to allocate %s segments, allocated %s
Reason: Internal error
Action: Reformat the disk and contact FDR/UPSTREAM Tech Support.
PC7273E (LclSOS) Allocation too large (%s exceeds max of %s)
Action: You need to reduce the Maximum Backup Size specified for this profile (or defaults) in the Director for this disk to be smaller than the maximum (above).
PC7274E (LclSOS) MAXBACKUPSIZE too large (%s exceeds max of %s)
Action: You need to reduce the Maximum Backup Size specified for the defaults in the director for this disk to be smaller than the maximum (above).
PC7275E (LclSOS) MAXBACKUPSIZE too large (%s exceeds max of %s)
Action: You need to reduce the Maximum Backup Size specified for this profile in the director for this disk to be smaller than the maximum (above).
PC7276E (LclSOS) Space allocated too large (%s exceeds max of %s)
Action: You need to reduce the Maximum Backup Size specified for this profile in the director for this disk to be smaller than the maximum (above).
PC7277E (LclSOS) Maximum number of profiles > 100
Reason: This exceeds the limit for the number of profiles.
Profile Update Errors
PC7300E (LclSOS) Error starting conversation
Reason: While attempting to update the partition table, there was an error communicating with the Storage Server to lock the partition table.
Action: See additional messages.
PC7301E (LclSOS) Error sending lock request
Reason: While attempting to update the partition table, there was an error communicating with the Storage Server to lock the partition table.
Action: See additional messages.
PC7302E (LclSOS) Error confirming lock request (1)
Reason: While attempting to update the partition table, there was an error communicating with the Storage Server to lock the partition table.
Action: See additional messages.
PC7303E (LclSOS) Error releasing lock
Reason: While attempting to update the partition table, there was an error communicating with the Storage Server to lock the partition table.
Action: See additional messages.
PC7304E (LclSOS) Error ending conversation
Reason: While attempting to update the partition table, there was an error communicating with the Storage Server to lock the partition table.
Action: See additional messages.
PC7305D (LclSOS) Adding the following profile
PC7306D (LclSOS) Deleting the following profile
PC7307D (LclSOS) Updating the following profile
PC7308D (LclSOS) Updating the profile defaults
PC7309D (LclSOS) Deleting the following backup
PC7310E (LclSOS) Open backup temp file error
Reason: There was an error creating the temporary file used to store backup details.
Action: See additional messages.
PC7311E (LclSOS) Open backup temp file error
Reason: There was an error writing to the temporary file used to store backup details.
Action: See additional messages.
PC7312D (LclSOS) Local backup disk report. Disk: %s
PC7313E (LclSOS) Insufficient memory
Reason: Can't allocate memory to update a local backup profile.
Action: Close applications or free memory.
PC7314E (LclSOS) Profile not found: %s
Reason: You asked to act on a profile which was not found.
Action: Specify a valid profile.
PC7315W (LclSOS) Ran local backup disk report
Reason: The following local backup disk report file was produced.
PC7316E (LclSOS) Local backup disk report not produced
Reason: A previous error caused the local backup disk report to not be produced
Action: See additional messages.
PC7317D (LclSOS) Default max backup size larger than volume
Action: Specify a valid default.
SOS Local Backup Errors
PC7350E (SOS Bkp) Unable to allocate required memory
Action: Free memory.
PC7351W (SOS Bkp) Out of space - sending remainder
Reason: During the backup, there was insufficient space to write all of the data. The remaining data will be transmitted.
Action: To avoid this problem, select a higher level of compression or increase the percentage of space allocated.
PC7352E (SOS Bkp) Disallowed by personalization
Reason: This workstation is disallowed for SOS local backup
Action: Respecify.
PC7353W (SOS Bkp) Out of space - sending remainder
Reason: During the backup, there was insufficient space to write all of the data. The remaining data will be transmitted.
Action: To avoid this problem, select a higher level of compression or increase the percentage of space allocated.
PC7354W (SOS Bkp) Out of space - sending remainder
Reason: During the backup, there was insufficient space to write all of the data. The remaining data will be transmitted.
Action: To avoid this problem, select a higher level of compression or increase the percentage of space allocated.
PC7355W (SOS Bkp) Out of space - sending remainder
Reason: During the backup, there was insufficient space to write all of the data. The remaining data will be transmitted.
Action: To avoid this problem, select a higher level of compression or increase the percentage of space allocated.
PC7356W (SOS Bkp) Unexpected out of space
Reason: After wrapping the buffer there was still a shortage of space. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7357W (SOS Bkp) Out of space - sending remainder
Reason: During the backup, there was insufficient space to write all of the data. The remaining data will be transmitted.
Action: To avoid this problem, select a higher level of compression or increase the percentage of space allocated.
PC7358E (SOS Bkp) Confirm error reusing local disk
PC7359D (SOS Bkp) Out of space - reusing
Reason: This profile has been configured so that if there is insufficient space on the local backup volume the space is reused. Note that this backup is not retained on the local backup volume, but is copied to standard Storage Server storage and immediately deleted.
More General File Errors
PC7401E (File) Async I/O disallowed
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7403E (File) Async read timeout
Reason: An async I/O took too long.
Action: Verify your hardware for the action specified.
PC7404E (File) Async write timeout
Reason: An async I/O took too long.
Action: Verify your hardware for the action specified.
PC7405E (File) Async read error
Reason: There was a file error asynchronously reading the file.
Action: See additional messages.
PC7406E (File) Async write error
Reason: There was a file error asynchronously writing the file.
Action: See additional messages.
PC7407E (File) Insufficient bytes read
Reason: Too few bytes were read. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7408D (File) Async I/O num retries:
Reason: You specified the "USLOGASYNCRETRIES" environment variable to log the number of async retries which may be slowing down your system.
PC7409E (File) Error waiting for async file I/O
Reason: (UNIX) if this is a snapshot, you may need to increase the SNAPSIZE as you may be running out of snapshot space.
PC7410E (File) Error getting file I/O result
Reason: Windows File I/O error getting the number of bytes in the I/O.
Action: See additional messages.
PC7411E (File) Expected a complete record
Reason: During a read, it was expected that we would be able to read a complete record and insufficient bytes were actually read.
Action: Contact FDR/UPSTREAM Tech Support.
PC7412E (File) Error resetting event for an async read
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7413E (File) Error resetting event for an async write
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7414E (File) Error reading file
Reason: There was a file error reading the specified file asynchronously.
Action: See the following Windows error.
PC7415E (File) Error writing file
Reason: There was a file error writing the specified file asynchronously.
Action: See the following Windows error.
PC7416E (File) Error creating event for an async read
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7417E (File) Error creating event for an async write
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7418I File asychronous capability has been disabled
Reason: All I/Os will be performed synchronously because you have used the USFILENOASYNC environment variable.
Status Pipe Errors
PC7430E (Control) Error opening pipe for read
Reason: There was an error opening named pipe for read from external process.
PC7431E (Control) Error opening pipe for write
Reason: There was an error opening named pipe for write to external process.
PC7432E (Control) Error sending negotiation record
Reason: There was a write error when UPSTREAM attempted to negotiate with external process.
PC7433E (Control) Error receiving negotiation record
Reason: There was a read error when UPSTREAM attempted to negotiate with external process.
PC7434E (Control) Error in response to negotiation
Reason: While in negotiation UPSTREAM received unexpected data.
PC7435E (Control) Error sending final record
Reason: There was a write error when UPSTREAM attempted to send final record to external process.
PC7436E (Control) Error receiving final ACK
Reason: There was a read error when UPSTREAM attempted to receive ACK for final record from external process.
PC7438E (Control) Error sending synchronization record
Reason: There was a write error when UPSTREAM attempted to send synchronization record to external process.
PC7439E (Control) Error receiving synchronization ACK
Reason: There was a read error when UPSTREAM attempted to receive ACK for synchronization record from external process.
PC7440E (Control) Error flushing backup data
Reason: There was an error when external process requested flushing of backup data.
PC7441E (Control) External request to fail
Reason: External process requested UPSTREAM to fail the backup.
PC7442E (Control) Error sending status record
Reason: There was a write error when UPSTREAM attempted to send status record to external process.
PC7443E (Control) Error receiving status ACK
Reason: There was a read error when UPSTREAM attempted to receive ACK for status record from external process.
PC7444E (Control) Error in response
Reason: While waiting for the ACK record UPSTREAM received unexpected data.
PC7445E (Control) Backup failed
Reason: Error in communications with external process caused UPSTREAM to fail the backup.
PC7446E (Control) Error receiving DirInfo
Reason: There was a read error when UPSTREAM attempted to receive DirInfo record from external process.
PC7447E (Control) Error in response
Reason: While waiting for the DirInfo record UPSTREAM received unexpected data.
Encryption Errors
PC7450E (Encryption) Initialization error:
PC7451E (Encryption) Encryption was not initialized.
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7452E (Encryption) AES Initialization error:
PC7453I (Encryption) Encrypting output tape.
PC7454I (Encryption) Input tape encrypted.
Remote Control/Status Errors
PC7518E Error getting NDMP Profile info
PC7519E While getting windows agent log, couldn't find "SystemRoot"
Reason: This feature is only valid on Windows systems.
PC7520E (VMWare) VMWare GUI processing error.
Reason: Error deleting VMWare profiles.
PC7521E (VMWare) VMWare GUI processing error.
Reason: Error deleting VMWare credentials.
PC7522E (VMWare) VMWare GUI processing error.
Reason: Error storing VMWare profiles.
PC7523E (VMWare) VMWare GUI processing error.
Reason: Error obtaining stored VMWare profiles.
PC7524E (VMWare) VMWare GUI processing error.
Reason: Error storing VMWare credentials.
PC7525E (VMWare) Security error.
Reason: User either not logged in, or not authorized to work with the VMWare PlugIn.
PC7526E (VMWare) VMWare GUI processing error.
Reason: Error obtaining stored VMWare credentials.
PC7527D (Java client) Error in tape drive vol ser request
PC7528I (Java client) Tape drive/vol ser request completed
PC7529I (Java client) Tape drive/vol ser request
PC7530E (Java client) Callback already registered.
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7531W (Java client) Error occurred in delete file
PC7532E (Java client) Insufficient memory (%u)
Reason: There was insufficient memory to allocate the memory buffer above.
Action: Close applications or free memory.
PC7533E (Java client) Write file not text buffer (0x%x)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7534W (Java client) Error occurred in write file
PC7535I (Java client) Write file
PC7536I (Java client) Completed write file
PC7537W (Java client) Error occurred in directory list
PC7538I (Java client) Directory listing
PC7539I (Java client) Completed directory listing
PC7540E (Java client) Already impersonating a different user %s
Reason: UPSTREAM can only impersonate one user at a time.
Action: Validate as the user above.
PC7541E (Java client) Must check security
Reason: The UPSTREAM system you're connecting to requires security be validated before you perform the requested function.
Action: Login.
PC7542I (Java client) List pending restarts
PC7543I (Java client) Completed list pending restarts
PC7544W (Java client) Error during restart list
PC7545E (Java client) PlugIn request failed
Reason: The processing of a PlugIn request issued by the Director failed.
PC7546E (Java client) PlugIn ID is invalid
Reason: The PlugIn ID number specified on a PlugIn request from the Director is invalid. The PlugIn for this ID number either does not exist or is not loaded.
PC7547I (Java client) PlugIn request
PC7548I (Java client) PlugIn request completed %s
PC7549W (Java client) Processing PlugIn request
PC7550E (Java client) Error while listing physical disks
PC7551E (Java client) Error getting physical disk info
PC7552E (Java client) Not negotiation record
Action: Contact FDR/UPSTREAM Tech Support.
PC7553E (Java client) Error checking security
PC7554I (Java client) Checking security: %s
PC7555I (Java client) Negotiating with remote
PC7556I (Java client) Negotiation complete %s
PC7557I (Java client) Remote request received
PC7558I (Java client) Remote request completed %s
PC7559I (Java client) Monitor started
PC7560I (Java client) Monitor stopped %s
PC7561I (Java client) Connection lost %s
PC7562I (Java client) Control request
PC7563I (Java client) Control request (%s) completed %s
PC7564I (Java client) File read request (%s)
PC7565I (Java client) File read request completed %s
PC7566I (Java client) List disks
PC7567I (Java client) List disks completed %s
PC7568I (Java client) Disk info request
PC7569I (Java client) Disk info completed %s
PC7570I (Java client) Check security
PC7571I (Java client) Security check completed %s
PC7572E (Java client) No connection
Action: Contact FDR/UPSTREAM Tech Support.
PC7573E (Java client) Receive on bad connection
Action: Contact FDR/UPSTREAM Tech Support.
PC7574D (Java client) UPSTREAM termination received
Reason: The Java client requested that UPSTREAM terminate.
PC7575E (Java client) UPSTREAM can't login
Reason: A system condition restricts UPSTREAM logins and UPSTREAM logins are required for this remote connection.
PC7576I (Java client) Remote connection lost
PC7577I (Java client) Missing service for svc. data
Reason: During run function.
Action: Contact FDR/UPSTREAM Tech Support.
PC7578I (Java client) Missing service for svc. data
Reason: During monitor.
Action: Contact FDR/UPSTREAM Tech Support.
PC7579W (Java client) Error getting local backup info
Action: Contact FDR/UPSTREAM Tech Support.
PC7580I (Java client) Examine disk
PC7581I (Java client) Examine disk completed %s
PC7582I (Java client) List disk profiles
PC7583I (Java client) List disk profiles completed %s
PC7584W (Java client) Getting local backup profiles
Action: Contact FDR/UPSTREAM Tech Support.
PC7585I (Java client) Update local profile
PC7586I (Java client) Update local profile completed %s
PC7587W (Java client) Updating local backup profile
Action: Contact FDR/UPSTREAM Tech Support.
PC7588E (Java client) Local Backup not supported.
Action: Use a different UPSTREAM function.
PC7589I (Java client) List local backups
PC7590I (Java client) List local backups completed %s
PC7591W (Java client) Getting local backups
PC7592I (Java client) List PlugIns
PC7593I (Java client) List PlugIns completed %s
PC7594W (Java client) Getting loaded PlugIn list
Action: Contact FDR/UPSTREAM Tech Support.
PC7595E (Rmt status) Bad IP address
Reason: You specified an IP address which can't be resolved.
Action: Respecify.
PC7596E (Rmt status) Error getting inbound IP addr (dy2)
Reason: There was a TCP/IP error determining the inbound IP address specified in UPSTREAM configuration.
Action: Verify your IP address for the configuration parameter TCPINADAPTER.
PC7597E (Rmt status) Error getting inbound IP addr (dyn)
Reason: There was a TCP/IP error determining the inbound IP address specified in UPSTREAM configuration.
Action: Verify your IP address for the configuration parameter TCPINADAPTER.
PC7598E (Rmt status) Error getting inbound IP addr (2)
Reason: There was a TCP/IP error determining the inbound IP address specified in UPSTREAM configuration.
Action: Verify your IP address for the configuration parameter TCPINADAPTER.
PC7599E (Rmt status) Error getting inbound IP addr.
Reason: There was a TCP/IP error determining the inbound IP address specified in UPSTREAM configuration.
Action: Verify your IP address for the configuration parameter TCPINADAPTER.
PC7600E (Rmt status) TCP/IP is not installed
PC7601E (Rmt status) socket call failed
Action: See additional messages.
PC7602D (Rmt status) REUSEADDR call failed
Reason: This is merely a warning message.
Action: See additional messages.
PC7603I (Rmt status) bind call failed
Reason: There was a TCP/IP error opening the specified status port (or status port + 1). These ports are only used for the Java user interface and for remote tracing and are generally not required. This error is usually caused by another copy of UPSTREAM which already has these ports in use.
Action: Specify a different status port (in the UPSTREAM configurator - they must be separated by 2 numbers) or take down the other copy of UPSTREAM.
PC7604E (Rmt status) listen call failed
Action: See additional messages.
PC7605E (Rmt status) iocntl for non-blocking failed
Action: See additional messages.
PC7606E (Rmt status) Insufficient memory
Action: Close other applications.
PC7607E (Rmt status) Service not found
Reason: While removing the service the service type specified was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC7608E (Rmt status) Insufficient memory
Reason: Occurred allocating service data memory.
Action: Close other applications.
PC7609E (Rmt status) accept call failed
Reason: Remote status will now be disabled.
Action: See additional messages.
PC7610E (Rmt status) Service not registered
Reason: This is probably a version incompatibility.
Action: Upgrade your version of UPSTREAM.
PC7611E (Rmt status) Exceeded data size
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7612E (Rmt status) Error occurred extracting type
Reason: Insufficient received data. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7613E (Rmt status) Exceeded data buffer
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7614E (Rmt status) Exceeded data buffer
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7615E (Rmt status) Receive exceeded buffer
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7616W (Rmt status) Remote error
Reason: This error was reported from the remote system.
Action: See additional messages.
PC7617E (Rmt status) Occurred during remote error
Action: See additional messages.
PC7618E (Rmt status) During check for remote request
Action: See additional messages.
PC7619E (Rmt status) During receive of remote request
Action: See additional messages.
PC7620E (Rmt status) socket call failed
Action: See additional messages.
PC7621D (Rmt status) REUSEADDR call failed
Reason: This is merely a warning message.
Action: See additional messages.
PC7622E (Rmt status) bind call failed
Reason: There was an error accessing the specified port.
Action: See additional messages.
PC7623E (Rmt status) listen call failed
Action: See additional messages.
PC7624E (Rmt status) iocntl for non-blocking failed
Action: See additional messages.
PC7625I (Rmt status) Remote disconnected
PC7626E (Rmt status) socket call failed
Reason: You will not be able to passthrough messages from cooperating PC applications.
Action: See additional messages.
PC7627W (Rmt status) Unable to reuse port
Reason: This is a warning message that can usually be ignored.
PC7628W (Rmt status) bind call failed
Reason: You will not be able to passthrough messages from cooperating PC applications. There was a TCP/IP error opening the specified status port + 2. This port is used to passthrough communications from cooperating PC applications and is generally not required. This error is usually caused by another copy of UPSTREAM which already has this port in use.
Action: Specify a different status port (in the UPSTREAM configurator - they must be separated by 3 numbers) or take down the other copy of UPSTREAM.
PC7629E (Rmt status) listen call failed
Reason: You will not be able to passthrough messages from cooperating PC applications.
Action: See additional messages.
PC7630E (Rmt status) Set non-blocking failed
Reason: You will not be able to passthrough messages from cooperating PC applications.
Action: See additional messages.
PC7631E (Rmt status) Error checking for pending data
Reason: You will not be able to passthrough messages from cooperating PC applications.
Action: See additional messages.
PC7632E (Rmt status) Error receiving remote func
Reason: There was a communications error receiving the remote function type.
Action: See additional messages.
PC7633I (Rmt status) Remote service request
Reason: A remote service request was received and is now being processed.
PC7634D (Rmt status) Remote passthrough request
Reason: A request to pass data through to the Storage Server was received and is now being processed. Press the CANCEL button if you wish to abort this process.
PC7635I (Rmt status) Remote service request processed
PC7636I (Rmt status) Remote service request failed
PC7637E (Rmt status) Receive failed
Reason: The receive of data from the remote system failed.
Action: See additional messages.
PC7638E (Rmt status) Unsupported function
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7639E (Rmt status) Error starting conversation
Reason: There was an error starting the conversation with the Storage Server while passing data through from another application.
Action: See additional messages.
PC7640E (Rmt status) Error sending data
Reason: There was an error sending data to the Storage Server while passing data through from another application.
Action: See additional messages.
PC7641E (Rmt status) Send failed
Reason: The send of data from the remote system failed.
Action: See additional messages.
PC7642E (Rmt status) Send error failed
Reason: The send of an error message through to the Storage Server failed.
Action: See additional messages.
PC7643E (Rmt status) Confirm failed
Reason: The send of a CONFIRM through to the Storage Server failed.
Action: See additional messages.
PC7644E (Rmt status) Confirmed failed
Reason: The send of a CONFIRMED through to the Storage Server failed.
Action: See additional messages.
PC7645E (Rmt status) Deallocate failed
Reason: Conversation end through to the Storage Server failed.
Action: See additional messages.
PC7646E (Rmt status) Receive failed
Reason: A receive of data from the Storage Server to the application failed.
Action: See additional messages.
PC7647E (Rmt status) Error during confirm
Action: See additional messages.
PC7648E (Rmt status) Unexpected data on confirm
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7649E (Rmt status) Error during deallocate
Action: See additional messages.
PC7650E (Rmt status) Error during Storage Server error
Reason: There was an error sending a Storage Server error to the remote PC.
Action: See additional messages.
PC7651E (Rmt status) Unexpected Storage Server type
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7652E (Rmt status) Error going into receive state
Action: See additional messages.
PC7653D (Rmt status) User aborted passthrough
PC7654I (Rmt status) Remote passthrough request
Reason: A request to pass data through to the Storage Server was received and is now being processed.
PC7655E (Rmt status) Unexpected service
Reason: UPSTREAM received an unexpected service type. It will be rejected.
Action: Check for client version incompatibility.
PC7656I Dynamically adjusted status port
PC7657E (Rmt status) Missing environment variable
Reason: A required environment variable was missing.
Action: If you started UPSTREAM manually, you will need to unset the USSTATUSSOCKET1 environment variable. Otherwise, this is an internal FDR/UPSTREAM error, contact FDR/UPSTREAM Tech Support.
PC7658I Closing status connection
PC7659E 2nd connection timeout
Action: Initial connection may have been errant.
Java Client Errors
PC7660E (Java Client) Unexpected initial type
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7661E (Java Client) Error extracting negotiation
Reason: There was an error extracting a field from the negotiation record. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7662E (Java Client) Error creating negotiation
Reason: There was an error inserting a field into the negotiation record or sending it. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
Action: See additional messages.
PC7663E (Java Client) Negotiation unexpected
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7664E (Java Client) Unexpected type
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7665E (Java Client) Unexpected state
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7666E (Java Client) Bad Run Function state
Reason: A request to have UPSTREAM perform a function was received in an invalid internal state. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7667E (Java Client) Error in Run Function
Reason: There was an error in the receive of the Run Function request from the client.
Action: See additional messages.
PC7668E (Java Client) Error receiving parameter
Reason: There was an error receiving a parameter line from the client workstation.
Action: See additional messages.
PC7669E (Java Client) Error previously reported
PC7670I (Java Client) Closing client connection
PC7671E (Java Client) Bad parameter type
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7672E (Java Client) Error during acknowledgement
Reason: While notifying the client that the parameters are acceptable, there was a comm error.
Action: See additional messages.
PC7673E (Java Client) Error during monitor function
Reason: This error occurred while the client was requesting status information of UPSTREAM
Action: See additional messages.
PC7674E (Java Client) Error during function response
Reason: This error occurred while the client was requesting status information of UPSTREAM
Action: See additional messages.
PC7675E (Java Client) Error adding status information
Reason: This error occurred while building or sending status information to the client.
Action: See additional messages.
PC7676E (Java Client) Unexpected data type
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7677E (Java Client) Error during flow control
Reason: An error was detected during the parse of flow control information.
Action: See additional messages.
PC7678E (Java Client) Error during status
Reason: An error was detected during the build or send of the status record to the client.
Action: See additional messages.
PC7679E (Java Client) Error during response
Reason: An error occurred while UPSTREAM was notifying the client of the result of the function requested.
Action: See additional messages.
PC7680E (Java Client) Error during control request
Reason: An error occurred while UPSTREAM was processing a control request from the client.
Action: See additional messages.
PC7681E (Java Client) UPSTREAM Busy
Reason: The request received can not be processed at this time as UPSTREAM is busy with another process.
Action: Retry later.
PC7682E (Java Client) All status ports unavailable
Action: Contact FDR/UPSTREAM Tech Support.
PC7683E (Java Client) UPSTREAM Busy
Reason: The requested UPSTREAM service is currently unavailable as it is busy processing request from another application.
Action: Try later.
PC7684E (Java Client) Insufficient memory
Action: Close applications or free memory.
PC7685E (Java Client) No allocated conversation
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7686E (Java Client) No allocated conversation
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7687E (Java Client) Bad internal structure
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7688E (Java Client) Bad internal structure
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7689E (Java Client) Bad internal structure
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7690E (Java Client) Bad internal structure
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7691E (Java Client) Control disallowed
Reason: You requested a control function from a machine which requires a login and the current UPSTREAM function is running under the UPSTREAM authority or has completed.
Action: Do the control function from a system which supports running as UPSTREAM.
PC7692E (Java Client) Invalid user/password
Reason: The user name and password specified are either invalid or do not match the user of the current UPSTREAM function
Action: Specify the user which owns the UPSTREAM function.
PC7693W (Java Client) Status reporting error
Action: See additional messages.
PC7694W (Java Client) Error in file read request
Action: See additional messages.
PC7695W (Java Client) Bad log file request type
Reason: This version of UPSTREAM does not support this function.
Action: Use a different function.
PC7696W (Java Client) Error opening requested file
Reason: While sending the requested file to the client, there was an error opening the file.
Action: See additional messages.
PC7697W (Java Client) Error reading requested file
Reason: While sending the requested file to the client, there was an error reading the file.
Action: See additional messages.
PC7698E (Java Client) Error seeking file
Reason: While sending the requested file to the client, there was an error seeing through the log.
Action: See additional messages.
PC7699E (Java Client) Insufficient memory
Action: Close applications or free memory.
Language File Errors
PC7800W (Lang) Error opening language file
Action: See additional messages.
PC7801W (Lang) Error reading language file
Action: See additional messages.
PC7802D (Lang) Duplicate English entry
Reason: The entry you specified in English matches an existing entry.
Action: Modify your entry.
PC7803W (Lang) Insufficient memory
Action: Close applications or free memory.
PC7804W (Lang) Insufficient memory
Action: Close applications or free memory.
PC7805W (Lang) Insufficient memory
Action: Close applications or free memory.
PC7806W (Lang) English entry too short
Reason: You must specify at least 2 characters for the English language entry.
Action: Modify your language file.
PC7807W (Lang) Language entry too short
Reason: You must specify at least 1 character for the English replacement text.
Action: Modify your language file.
PC7808W (Lang) Last quote missing in file
Reason: The closing quote is missing from the replacement text field.
Action: Modify your language file.
PC7809W (Lang) Replacement missing in file
Reason: The English text exists, but the replacement language text is missing.
Action: Modify your language file.
Hard Link Errors
PC7900E (Hard links) Error creating tree
Reason: There was a memory shortage creating the tree required for processing hard links.
Action: Close applications or free memory.
PC7901E (Hard links) Error adding to tree
Reason: There was a memory shortage adding to the tree required for processing hard links.
Action: Close applications or free memory.
PC7902I (Hard links) Unable to open file
Reason: The file open failed while checking hard link information.
Action: See messages above. Note that this error can generally be ignored.
PC7903I (Hard links) Error getting hard link info
Reason: When attempting to read the hard link information, there was a file system error.
Action: See messages below. Note that this error can generally be ignored.
PC7904W (Hard links) Error deleting hard links file
Action: See additional messages.
PC7905E (Hard links) Error creating restore file
Action: See additional messages.
PC7906E (Hard links) Error flushing restore file
Action: See additional messages.
PC7907E (Hard links) Unexpected hard link
Reason: After the first pass, a link was received. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7908E (Hard links) Invalid hard link non-file data
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7909E (Hard links) Bad non-file data subtype
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7910E (Hard links) Data size error
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7911E (Hard links) Error writing hard link file
Reason: There was an I/O error writing the hard link temporary file.
Action: See file I/O errors.
PC7912E (Hard links) Error reading hard links file
Reason: There was an I/O error reading the hard links temporary file. No additional hard links will be restored.
Action: See file I/O errors.
PC7913E (Hard links) Error rewriting description
Action: See additional messages.
PC7914E (Hard links) Insufficient memory
Reason: While attempting to create a sub-tree in the tree of hard links, there was insufficient memory.
Action: Close applications or free memory.
PC7915E (Hard links) Insufficient memory
Reason: While attempting to add a hard link to the tree of hard links, there was insufficient memory.
Action: Close applications or free memory.
PC7916E (Hard links) Insufficient memory
Reason: While attempting to add a hard link file name to the hard links tree, there was insufficient memory.
Action: Close applications or free memory.
PC7917E (Hard links) Unrestartable restore
Reason: A fatal hard link error occurred earlier in the restore and thus it is non-restartable.
Action: Restart the restore from the beginning.
PC7918E (Hard links) Empty link tree
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7919E (Hard links) Unexpected end of link tree
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7920D (Hard links) Restore complete
PC7921E (Hard links) Error saving original specs
Action: See additional messages.
PC7922E (Hard links) No tree items
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7923E (Hard links) Error recovering original params
Action: See additional messages.
PC7924E (Hard links) No subtree in restore
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7925E (Hard links) File name doesn't match internal
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7926W (Hard links) Error deleting old link
Reason: There was a file I/O error deleting a file we wish to hard link to.
Action: See file I/O error.
PC7927W (Hard links) Link failed
Reason: There was a file I/O error when attempting to perform the hard link on your UNIX system.
Action: See file I/O error.
PC7928W (Hard links) Error opening link file
Reason: There was a file I/O error when attempting to open a file to link it to another file.
Action: See file I/O error.
PC7929E (Hard links) Insufficient memory
Reason: When creating the tree to hold the hard links received, there was insufficient memory.
Action: Close applications or free memory.
PC7930D (Hard links) Restoring hard links
Reason: Now that regular data has been restored, UPSTREAM will restore hard links. This may be performed multiple times depending upon how many hard links were requested.
PC7931E (Hard links) Expected file not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7932E (Hard links) Original file name not found
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7933E (Hard links) Expected links and none found
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7934E (Hard links) Error saving original parameters
Action: See additional messages.
PC7935E (Hard links) Error recovering original parameters
Action: See additional messages.
PC7936E (Hard links) File not restored: %s
Reason: A previous error kept the hard linked file above from being restored. The data part of the file may not have been backed up due to an access error.
PC7937D (Hard links) DB not found: %s
Reason: All hard links will now be backed up and the file rebuilt.
PC7938E (Hard links) Insufficient memory creating DB tree
Action: Close applications or free memory.
PC7939D (Hard links) Error opening hard link DB file
Reason: All hard links will now be backed up and the file rebuilt.
PC7940E (Hard links) Insufficient memory adding to DB tree
Action: Close applications or free memory.
PC7941D (Hard links) Error reading hard link file
Reason: All or some hard links may now be backed up and the hard link file rebuilt.
PC7942D (Hard links) Invalid type in hard link file (0x%x)
Reason: All or some hard links may now be backed up and the hard link file rebuilt.
PC7943D (Hard links) Invalid file name size in link file (%u)
Reason: All or some hard links may now be backed up and the hard link file rebuilt.
PC7944E (Hard links) Insufficient memory adding to DB tree
Action: Close applications or free memory.
PC7945E (Hard links) Insufficient memory adding to DB tree
Action: Close applications or free memory.
PC7946E (Hard links) Error opening for write hard link DB file
Reason: For the next backup, all hard links will be backed up and the file rebuilt.
PC7947E (Hard links) Error writing hard link DB header
Reason: For the next backup, all hard links will be backed up and the file rebuilt.
PC7948E (Hard links) Error writing hard link DB file
Reason: For the next backup, all hard links will be backed up and the file rebuilt.
PC7949E (Hard links) Expected a hard link in tree
Reason: For the next backup, all hard links will be backed up and the file rebuilt.
PC7950D (Hard links) Windows error #%u linking file
PC7951E (Hard links) Windows error #%u loading KERNEL32.dll
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7952E (Hard links) Windows error #%u loading functions
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC7953D (Hard links) Unexpected non-NULL handle
Reason: Internal error, but can be ignored
Action: Contact FDR/UPSTREAM Tech support if you have some more important error anyway.
USVSS Errors
PC7975I (USVSS) Excluding component
Reason: The specified component is being excluded. The writer options for the writer that owns this component specified ExcludeOnErrors and/or ExcludeNewComponent.
Action: See previous messages.
PC7976E (USVSS) Can't modify a VSS document
Reason: An error occurred while attempting to modify one of the VSS documents required for a WinSS PlugIn component restore.
Action: Contact FDR/UPSTREAM tech support.
PC7977E (USVSS) Can't copy the system (ie boot) directory
Reason: An error occurred while copy the directory that contains the Boot Configuration Database (BCD). The Microsoft glossary defines this as the "system partition", but is really the partition from which the system is booted.
Action: Contact FDR/UPSTREAM tech support.
PC7978E (USVSS) Can't create LastRestoreId UUID
Reason: An error occurred while attempting to create the LastRestoreId UUID.
Action: Contact FDR/UPSTREAM Tech Support.
PC7979E (USVSS) Can't convert LastRestoreId UUID
Reason: An error occurred while attempting to convert the LastRestoreId UUID.
Action: Contact FDR/UPSTREAM Tech Support.
PC7980E (USVSS) Can't create the SystemStateRestore key
Reason: An error occurred while attempting to create the HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\SystemStateRestore registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC7981E (USVSS) Can't create the LastRestoreId value
Reason: An error occurred while attempting to create the LastRestoreId value for the HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\SystemStateRestore registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC7982E (USVSS) Can't create the SystemStateRestore value
Reason: An error occurred while attempting to create the SystemStateRestore value for the HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC7983E (USVSS) Can't set LastRestoreId value
Reason: An error occurred while attempting to create the LastRestoreId value for the HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\SystemStateRestore registry key.
Action: Contact FDR/UPSTREAM Tech Support.
PC7984E (USVSS) Can't acquire exclusive access to profile
Reason: The specified backup profile could not be accessed exclusively for the current action. Ensure that another action is not currently using this backup profile.
Action: Determine which action currently holds exclusive access to the profile and stop it or wait for it to finish.
PC7985E (USVSS) Can't set authoritative
Reason: An error occurred while attempting to set the authoritative restore status for VSS component.
Action: Contact FDR/UPSTREAM tech support.
PC7986E (USVSS) Can't allocate Exchange verify info
Reason: An error occurred while attempting to allocate a buffer used to validate the files for an Exchange storage group.
Action: Contact FDR/UPSTREAM tech support.
PC7987E (USVSS) Can't verify an Exchange storage group
Reason: An error occurred while attempting to verify an Exchange storage group.
Action: Contact FDR/UPSTREAM tech support.
PC7988E (USVSS) Can't verify the Active Directory database
Reason: An error occurred while attempting to verify the Active Directory database.
Action: Contact FDR/UPSTREAM tech support.
PC7989W (USVSS) The SqlServerWriter components are excluded
Reason: SQL databases (the components of the SqlServerWriter) cannot be backed up incrementally with a Windows SnapShot (WinSS) backup. All of the SQL database components are are being excluded from this incremental backup.
Action: Consider using the MSSQL PlugIn to backup and restore your SQL databases instead of the WinSS PlugIn. The MSSQL PlugIn provides more options for restoring the SQL databases.
PC7990E (USVSS) Invalid KeysNotToRestore value
Reason: While attempting to copy the keys referenced in the KeysNotToRestore key from the active SYSTEM hive to the restored SYSTEM hive a value was found in the KeysNotToRestore key which is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC7991E (USVSS) Temporary SOFTWARE key already exists
Reason: While attempting to create the HKEY_LOCAL_MACHINE\RestoredSOFTWARE temporary key in the active registry, it was found that this key already exists. This is most likely left over from a prior failed restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC7992E (USVSS) Can't save temporary SOFTWARE key
Reason: An error occurred while attempting to save the HKEY_LOCAL_MACHINE\RestoredSOFTWARE temporary key in the active registry to the restored SOFTWARE registry hive file.
Action: Contact FDR/UPSTREAM Tech Support.
PC7993E (USVSS) Can't preserve SOFTWARE hive keys
Reason: An error occurred while attempting to copy the registry keys that are not to be restored from the active registry SOFTWARE hive to the restored registry SOFTWARE hive.
Action: Contact FDR/UPSTREAM Tech Support.
PC7994E (USVSS) Can't rename temporary registry hive file
Reason: An error occurred while attempting to rename a temporary hive file during a registry restore. rename operation.
Action: Contact FDR/UPSTREAM tech support.
PC7995E (USVSS) Can't set BurFlags value
Reason: An error occurred while attempting to set the "SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\ Backup/Restore\Process at Startup" registry value.
Action: Contact FDR/UPSTREAM tech support.
PC7996E (USVSS) Can't add to a multi-string value
Reason: An error occurred while attempting to add the first or an additional string to a registry multi-string value.
Action: Contact FDR/UPSTREAM tech support.
Backup Errors (continued)
PC8000E A user name for the UID is not defined
Action: Add a definition for the UID using the appropriate utility for your system.
PC8001E A group name for the GID is not defined
Action: Add a definition for the GID using the appropriate utility for your system.
PC8002E Bad translation tables for UTF-8
Action: Specify UPSTREAM unicode or one-to-one translation tables (such as ANS2ATOE.TAB and ANS2ETOA.TAB).
PC8003E Insufficient memory
Reason: While saving file system information for SOS timestamp files, there was insufficient memory.
Action: Close applications or free memory.
PC8004E Insufficient memory
Reason: While saving file system information for SOS timestamp files, there was insufficient memory.
Action: Close applications or free memory.
PC8005E Error seeking for write
Reason: While writing to the internal UPSTREAM backup file there was a file system error writing to the file.
Action: See additional messages.
PC8006E Error seeking for read
Reason: While reading from the internal UPSTREAM backup file there was a file system error writing to the file.
Action: See additional messages.
PC8007E (HPUX) sysfs call failed
Reason: The call to determine the file system type failed.
Action: See additional messages.
PC8008E (ALPHA) statfs call failed
Reason: The call to determine the file system type failed.
Action: See additional messages.
PC8009I (UNIX) Resolved to system path:
PC8010I (UNIX) Skip separate file system: %s
PC8011E (LINUX) statfs call failed
Reason: The call to determine the file system type failed.
Action: See additional messages.
PC8012W Skipping non LINUX file system
Reason: The following directory was included in the file specification, but is not a native LINUX file system and thus will not be included in the backup.
PC8013E Error reading backup file for restart
Reason: There was an error reading the backup file for the purpose of retrieving it's version date. This file is skipped, search for restartable backups will continue.
Action: See additional messages
PC8014E Error renaming backup file
Reason: Old restartable backup file with the same PID found, but attempt to rename it to preserve the contents failed. The old backup file will be overwritten.
PC8015E Error reading backup file
Reason: The file info record in the backup file is short.
Action: Contact FDR/UPSTREAM Tech Support.
PC8016W Not local EXT2, Reiser, XFS, GFS, VxFS, PVFS, MAPFS, TMPFS, NSS or GPFS file system
Reason: The file specification (below) is not part of a local Linux UNIX EXT2, Reiser, XFS, GFS, VxFS, MAPFS, TMPFS, NSS or GPFS file system. Only files in a known local file system may be backed up with UPSTREAM.
Action: Respecify or use the USLINUXUSERFS environment variable to set a user specified file system.
PC8017E Error sending idle message
Action: See additional messages.
PC8018E Can't skip backup scan and sort backup
Reason: These options are incompatible.
Action: Respecify.
PC8019E (UNIX) Error creating full system spec
Reason: There was an internal error creating a "fake" file spec used to indicate a file system in a full system backup.
PC8020E (UNIX) Error adding param to full system spec
Reason: There was an internal error updating a parameter in a "fake" file spec used to indicate a file system in a full system backup.
PC8021W Incremental database file not found
Reason: The database required for the incremental database facility (INCRDB) was not found. The archive bit (PC) or modification file (UNIX) method will be used instead. This message should be expected when migrating to this incremental detection method.
PC8022E Error adding FILES value %s %s
Action: See message above.
PC8023E Failed writing info on file: %s
Reason: The file above was the one we were trying to write info on to the backup file.
PC8024E Error reopening file to flush during close
Reason: There was an error writing a file information record to the internal backup file.
Action: See additional messages.
PC8025E Error writing pending data during close
Reason: There was an error writing a file information record to the internal backup file.
Action: See additional messages.
PC8026E Error writing pending data during free
Reason: There was an error writing a file information record to the internal backup file.
Action: See additional messages.
PC8027E Error writing pending data during flush
Reason: There was an error writing a file information record to the internal backup file.
Action: See additional messages.
PC8028I Registry will not be opened
Reason: These file specs can not include the Windows system state.
PC8029D Error #%u getting FS type for: %s (%s)
Reason: This will only affect display of disaster recovery information and can usually be ignored.
PC8030D Error getting mount info for %s
Reason: This will only affect display of disaster recovery information and can usually be ignored.
PC8031D %s is not a known volume type (%u/%u)
Reason: This will only affect display of disaster recovery information and can usually be ignored.
PC8032I UID of %u (%s) too long for %s
Reason: The name of this UID for this file will not be stored, only the ID.
PC8033I GID of %u (%s) too long for %s
Reason: The name of this GID for this file will not be stored, only the ID.
PC8034E You must run a full before running an incremental
Reason: The timestamp file created during prev. backup is missing:
PC8035I Truncated names activated, max file name size %u
PC8036E Error reported and FAILBACKUPONERROR specified
Reason: The backup is now failed.
PC8037E Error in 'readlink' call while building dirs above
PC8038E Error in 'statx' or 'lstat' call while building dirs above
PC8039E Expected Dir above '%s' (linked to '%s') not directory
Reason: This is a fatal error because all indications are that this is supposed to be a directory.
PC8040E Directory above search failed (%s)
PC8041E Directory above search failed (%s)
PC8042E Directory above search failed (%s)
PC8043E Directory above search failed (%s)
PC8044I USUIDGIDERRORS enabled
PC8045I (Solaris) Skipping LOFS file system:
PC8046E Transport options are mutually exclusive.
Reason: These data transport options are mutually exclusive. Please specify only one of these:
PC8047I Truncated names disallowed for plugins
Reason: Only the WinSS PlugIn supports truncated names.
PC8048W Free space not available.
Reason: UPSTREAM Client was not able to obtain free disk available but will try to continue with the backup:
PC8049E Not enough free disk space.
Reason: UPSTREAM Client determined that there is not enough disk space in WORKPATH for building backup file:
NT Errors (continued from #4679)
PC8100E (WinNT) Error adding access allowed ACE
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC8101E (WinNT) Error setting security DACL
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC8102E (WinNT) Set registry key security
Reason: During a registry authorization there was a Windows NT error.
Action: See additional messages.
PC8103E (WinNT) Error getting logged on user name
Action: See additional messages.
PC8105E (NT) A required DLL cannot be loaded
Reason: An error occurred while attempting to load a DLL. The name of the DLL follows. This DLL is required by the WinCrypt PlugIn to perform encrypted backup and restore operations.
Action: Contact FDR/UPSTREAM Tech Support.
PC8106E (NT) A DLL function cannot be loaded
Reason: One or more of the API functions exported by one or more of the DLLs required by the WinCrypt PlugIn could not be loaded.
Action: Contact FDR/UPSTREAM Tech Support.
PC8107E (NT) Error setting file Security Descriptor
Reason: An error occurred while attempting to set a security descriptor for an encrypted file or directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC8108E (NT) Insufficient memory for file handle
Reason: While attempting to allocate memory for a file handle, there was insufficient memory.
Action: Close applications or free memory.
PC8109E (NT) Error getting file Security Descriptor
Reason: An error occurred while attempting to get a security descriptor for an encrypted file or directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC8110E (NT) Error opening a file or directory
Reason: An error occurred while attempting to open a file or directory for encrypted raw file processing.
Action: Contact FDR/UPSTREAM Tech Support.
PC8111E (NT) Error creating a semaphore
Reason: A semaphore required for the processing of an encrypted file or directory could not be created.
Action: Contact FDR/UPSTREAM Tech Support.
PC8112E (NT) Error starting a new thread
Reason: A new thread required for the processing of an encrypted file or directory could not be started.
Action: Contact FDR/UPSTREAM Tech Support.
PC8113E (NT) Invalid read file position
Reason: An internal UPSTREAM error occurred while trying to read from an encrypted file or directory at a position other than the current position.
Action: Contact FDR/UPSTREAM Tech Support.
PC8114E (NT) Error reading a file or directory
Reason: An error occurred while reading from an encrypted file or directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC8115E (NT) Invalid write file position
Reason: An internal UPSTREAM error occurred while trying to write to an encrypted file or directory at a position other than the current position.
Action: Contact FDR/UPSTREAM Tech Support.
PC8116E (NT) Error writing a file or directory
Reason: An error occurred while writing to an encrypted file or directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC8117E (NT) Can't allocate file or directory non-file data
Reason: While attempting to allocate memory for a set of non-file data for a file or directory, there was insufficient memory.
Action: Close applications or free memory.
PC8118E (NT) Can't open an encrypted directory for backup
Reason: While attempting to open an encrypted directory to read its encrypted data, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC8119E (NT) Can't read from an encrypted directory
Reason: While attempting to read the encrypted data from an encrypted directory, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC8120E (NT) Can't open an encrypted directory for restore
Reason: While attempting to open an encrypted directory to write its encrypted data, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC8121E (NT) Insufficient memory for a Security Descriptor
Reason: While attempting to allocate memory for a security descriptor for a file or directory, there was insufficient memory.
Action: Close applications or free memory.
PC8122E (NT) Can't write to an encrypted directory
Reason: While attempting to write the encrypted data to an encrypted directory, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC8123E (NT) Error (re)encrypting a directory
Reason: A directory on the backup was encrypted, but an error occurred while attempting to encrypt the directory after the directory was restored.
Action: Contact FDR/UPSTREAM Tech Support.
Tape Errors
PC8723E Error loading media into drive.
PC8724E Error ejecting media from drive.
PC8725E Tape name invalid
Reason: You may need to redefine your library files.
PC8726E Tape didn't move (try to get to %u, stuck at %u)
Action: May be corrupted data - validate restore of data earlier on this tape.
PC8727E Error occurred during tape locate (position)
PC8728E Tape position 0 not expected (%s)
Reason: After a tape mark was encountered, it was expected that the tape would be positioned after the mark. However, it was positioned at block 0. This is a SCSI protocol error.
PC8729E Can't find file at block #%u (byte #%u)
Reason: This tape may require a REGEN to recover the data
PC8730I Data not found at record #%u byte %u, searching...
Reason: We'll read through the tape to see if the data is nearby.
PC8731I Data found at block #%u (%u blocks forward)
Reason: The restore will continue.
PC8732E Error seeking back to the previous file mark for search
PC8733I Search will begin at block #%u (start of backup)
PC8734I Locate retries are making progress - continue
PC8735I Tapemark requested after label - ignore
PC8736D File counter fails. Is %u, expected %u
Reason: This may indicate a corrupted file or files
PC8737D Record counter fails. Is %u, expected %u
Reason: This may indicate a corrupted file or files
PC8738E Unexpected NULL record
Action: Call tech support.
PC8739D Bad USTAPECACHESIZE is invalid (%s)
Reason: The minimum size is 4096.
PC8740E Error rebuilding file information record
Tape Access Errors
PC9288E Error clearing UNIT_ATTENTION on drive
PC9289E Missing device name
PC9290I No high-speed tape search enabled
PC9291D Error releasing exclusive lock on tape
PC9292D Error disabling RSM interface.
PC9293E Error listing SCSI drives
PC9294E Error getting tape parameters
PC9295W Error unlocking tape
PC9296E Error locking tape
PC9297E Error opening tape lock file
PC9298E Error reading tape label2
Action: See additional messages.
PC9299E No MVS label2 on tape
Reason: An end of file or end of medium was encountered while reading the host label 2 on the tape.
Action: Mount the correct tape.
PC9300E Insufficient memory
Reason: There was a memory shortage allocating memory to list tape drives.
Action: Close applications or free memory.
PC9301I Error obtaining inquiry data for device
Reason: There was a Windows NT error obtaining inquiry data for the following device.
Action: Contact your FDR/UPSTREAM administrator.
PC9302E Insufficient memory
Reason: There was a memory shortage allocating memory to open the tape device.
Action: Close applications or free memory.
PC9303E Error opening drive
Action: See additional messages.
PC9304E Error accessing tape information by name
Action: See additional messages.
PC9305E Name is not a tape drive
Reason: The SCSI name you passed in is not a tape drive.
Action: Respecify the name.
PC9306E Error reading block limits
Action: See additional messages.
PC9307E Error determining if a tape is mounted
Reason: While determining tape information, there was an error determining if the tape is mounted.
Action: See additional messages.
PC9308E Error testing if the tape unit is ready
Action: See additional messages.
PC9309E Error rewinding tape getting tape info
Action: See additional messages.
PC9310E Error rewinding tape
Action: See additional messages.
PC9311E Error spacing over the tape
Action: See additional messages.
PC9312E Error reading the tape position
Action: See additional messages.
PC9313E Error reading from the tape
Action: See additional messages.
PC9314E Initial tape block not in expected location, at %u (raw %u)
Reason: Usually, this means that the tape is not in MVS data format
Action: Mount the correct tape.
PC9315E Error reading tape label
Action: See additional messages.
PC9316E No MVS label on tape
Reason: An end of file or end of medium was encountered while reading the MVS label on the tape.
Action: Mount the correct tape.
PC9317E Host label not correct
Reason: This tape is missing the prefix label of "VOL1" on the tape header.
Action: Mount an UPSTREAM tape.
PC9318E Error reading tape label1
Action: See additional messages.
PC9319E No MVS label1 on tape
Reason: An end of file or end of medium was encountered while reading the host label 1 on the tape.
Action: Mount the correct tape.
PC9320E MVS label 1 not correct
Reason: This tape is missing the prefix label of "HDR1" on the tape header.
Action: Mount an UPSTREAM tape.
PC9321E Tape not mounted
Action: Mount a tape.
PC9322E Error reading device configuration
Action: See additional messages.
PC9323E Tape target/LUN not found
Reason: During the open the specified target/LUN was not found on the specified SCSI device.
Action: Respecify.
PC9324E Bad tape device name
Action: See additional messages.
PC9325E Error ejecting tape
Action: See additional messages.
PC9326W Wrong tape
Reason: The tape you used has a different file name than the last one.
Action: Insert the correct tape.
PC9327W Wrong tape
Reason: The tape you used is the wrong tape in sequence
Action: Insert the next tape in the sequence.
PC9328E Error inquiring on drive
Action: See additional messages.
PC9329E Error reopening drive after eject.
Action: See additional messages.
PC9330E Writes not supported
Reason: You must enable the Windows driver interface to perform backups.
PC9331E Error occurred during a write to tape
PC9332E Error writing a tape filemark
PC9333E Error setting tape variable blocksize
PC9334E Error rewinding to read tape label.
PC9335E Expected '85' in data, got %x at %d in block %d
PC9336E Error setting block size
PC9337E NULL handle %s
Action: Contact FDR/UPSTREAM Tech Support.
PC9338E Invalid block size. Specify a size > %u
Action: Respecify the profile definition.
PC9339E Insufficient memory
Action: Close applications or free memory.
PC9340I Hardware supports fixed blocks only; using blocksize %u
PC9341I Invalid fixed block size %u, using %u
PC9342E Unexpected EOF: %d, or EOM: %d
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9343E Wrote %u bytes of %u bytes, but got error %u (%s)
Action: Contact FDR/UPSTREAM Tech Support.
PC9344E Error occurred at beginning of data area
PC9345E Unexpected %s at beginning of data
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9346E Invalid block size during space (block size %u)
PC9347E Error reading the tape position
PC9348E Invalid block size during read position (block size %u)
PC9349E Error getting media types
UNIX Tape Access Errors
PC9350E Error setting record block size
PC9351D Error getting tape drive info
PC9352E Error rewinding tape
PC9353E NULL handle during %s
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9354E Error during setup for get tape drive info
PC9355E Error spacing through the tape
PC9356E Error reading tape position
PC9357E Error reading tape
PC9358E Error clearing drive booleans
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9359E Error setting drive booleans
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9360E Unknown tape dev type (0x%x)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9361E Exceeded max tape drives
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9362E Error testing whether unit is ready
Action: See subsequent messages.
PC9363E Error reading block limits
Action: See subsequent messages.
PC9364E Block size %u must be between %u and %u
Action: Adjust your block size in the UPSTREAM Profile configuration definition.
PC9365E Error setting block size
PC9366E Block position missing
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9367E Unexpected end of medium
Reason: Internal error
Action: Contact FDR/UPSTREAM Tech Support.
PC9368E Unexpected position. Expected file %u, block %u, got file %u block %u after %s
PC9369E Can't use SAN on AIX on same machine
Reason: When the UPSTREAM client and server are the same machine, due to AIX system limitations, SAN support can't be used.
Action: Turn off the SAN option.
PC9370W No sense code. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. May be successful or may be filemark, end of medium or illegal length.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9371W Recovered error. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9372W Not ready. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9373W Medium error. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9374W Hardware error. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9375W Illegal request. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Internal error.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9376W Unit attention. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Indicates that the removable medium may have been changed or the target has been reset.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9377W Data protect. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Verify that you do not have the write protect tab set for this media.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9378W Blank check. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Blank media or format defined end of data.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9379W Vendor specific. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9380W Copy aborted. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9381W Aborted command. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9382W Obsolete. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9383W Volume overflow. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Reached end of partition with data in buffers. Internal error.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9384W Miscompare. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Source does not match data read.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9385W Reserved. ASC: 0x%x ASCQ: 0x%x Status: 0x%x Status2: 0x%x
Reason: SCSI return code. Internal error.
Action: The ASC and ASCQ can be looked up in the SCSI 3 RFC, page 81.
PC9386E Can't release reserve
Action: Contact FDR/UPSTREAM Tech Support.
PC9387E Tape access error.
PC9388I Eject requested but drive already empty
PC9389E Not a tape device. Type: 0x%x
Action: Contact FDR/UPSTREAM Tech Support for an interpretation of the peripheral qualifier.
Intermediate Disk/Tape Access Errors
PC9499E Data larger than buffer (%u > %u)
Reason: Either the record size is too large or the data buffer size in the profile is set too small.
Action: Respecify.
PC9500E Attempt to write NULL record
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9501E Bad length on disk/tape
Reason: This disk/tape may not be usable.
Action: Contact FDR/UPSTREAM Tech Support.
PC9502E Bad record type on disk/tape
Action: Verify that this is UPSTREAM media.
PC9503E Insufficient memory
Action: Close applications or free memory or disk space.
PC9504E Error parsing disk/tape catalog record
Action: See additional messages
PC9505E Bad disk/tape record length
Action: Contact FDR/UPSTREAM Tech Support.
PC9506W Not C record
Reason: Repeating C records were supposed to follow the non-repeating C record. This is not a fatal error.
PC9507E Error parsing disk/tape catalog repeated record
Action: See additional messages
PC9508E Error parsing disk/tape file info record
Action: See additional messages
PC9509E Error build non-repeating catalog disk/tape record
Action: See additional messages
PC9510E Error writing a record to disk/tape.
Action: See additional messages
PC9511E Invalid record type (0x%x)
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9512E Insufficient memory
Reason: Can't allocate write disk cache memory.
Action: Close programs or free memory.
PC9513E Can't convert media to binary
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9514E Unknown record type (0x%x) at block #%u
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9515E Error reading record
Action: See additional messages.
PC9516E Expected 'C' record, found %c record
Reason: Internal error. Indicates corruption.
Action: Contact FDR/UPSTREAM Tech Support.
PC9517E Insufficient memory
Reason: Insufficient memory to allocate a temporary write buffer.
Action: Close applications or free memory.
PC9518E Expecting media record
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9519I Error parsing remove file structure on disk/tape.
Reason: Internal error.
Action: Contact FDR/UPSTREAM Tech Support.
Dispatcher Errors
PC9520I (Dispatcher) Loading schedules from %s
Reason: Dispatcher started.
PC9521E (Dispatcher) Schedule file(s) in use by process #%s
Reason: Dispatcher can not be started.
PC9522E (Dispatcher) Schedule file(s) not found in %s
Reason: Dispatcher was not started.
PC9523E (Dispatcher) Error creating Dispatcher PID file: %s %s
Reason: Dispatcher was not started.
PC9524E (Dispatcher) Dispatcher is stopping.
Reason: Dispatcher was not started. Try later.
PC9525E (Dispatcher) Dispatcher is reloading schedules.
Reason: Dispatcher was not started. Try later.
PC9526E (Dispatcher) Dispatcher is in unknown state.
Reason: Dispatcher was not started. Try later.
PC9527I (Dispatcher) No schedules found.
Reason: Dispatcher was not started.
PC9528E (Dispatcher) Error parsing parameters from:
PC9529E (Dispatcher) Error processing schedule parameters from:
PC9530E (Dispatcher) Schedule "%s" on %s: %s
PC9531I (Dispatcher) FDR/UPSTREAM (schedule "%s") on %s finished %s
PC9532I (Dispatcher) FDR/UPSTREAM started from "%s, %s" on %s
PC9533E (Dispatcher) FDR/UPSTREAM start failed
PC9534E (Dispatcher) Error reading schedules
PC9535E (Dispatcher) Error checking contingency for %s: %s
PC9536E (Dispatcher) Error saving running schedules:
PC9537E (Dispatcher) Error getting saved schedules: %s.
Reason: The state of your Schedule Sets and Scheduled Commands is lost. You may see your scheduled task starting up again even though they did run today or were suspended.
PC9538E (Dispatcher) Error writing schedule set file.
PC9539E (Dispatcher) Error processing Dispatcher update request.
Reason: There were errors updating this schedule set. Due to these errors schedule set data may be lost:
PC9540I (Dispatcher) Reloading new schedules from %s.
PC9541E (Dispatcher) FDR/UPSTREAM (schedule "%s") on %s failed.
PC9542E (Dispatcher) FDR/UPSTREAM (schedule "%s") on %s failed to start.
Reason: Unable to start USTBATCH or communicate with the target.
PC9543I (Dispatcher) Started %s, ended %s
PC9544E (Dispatcher) Error.in time spec.
Reason: Dispatcher command failed.
PC9545E (Dispatcher) Time passed.
Reason: The time specified for the command passed.
PC9546E (Dispatcher) ScheduleSet file error.
PC9547E (Dispatcher) Error processing Dispatcher command.
PC9548I (Dispatcher) Received a command:
PC9549I (Dispatcher) Command processed.
PC9550E (Dispatcher) Unknown command.
PC9551E (Dispatcher) Error deleting DispatcherID file..
PC9552I (Dispatcher) Dispatcher is stopped now.
PC9553I (Dispatcher) All schedules resumed.
PC9554I (Dispatcher) All schedules suspended.
PC9555I (Dispatcher) Dispatcher DISABLED.
PC9556E (Dispatcher) Error processing Dispatcher info request.
PC9557E (Dispatcher) Error processing Dispatcher update request.
Reason: Due to previous errors the schedule set was reset to the original state.
PC9558E (Dispatcher) Dispatcher is stopped (or stopping).
Reason: Requested operation was not performed. Try later.
PC9559I (Dispatcher) Schedule "%s, %s on %s" resumed.
PC9560I (Dispatcher) Schedule "%s, %s on %s" suspended.
PC9561E (Dispatcher) Schedule to suspend not found.
PC9562E (Dispatcher) Schedule to resume not found.
PC9563E (Dispatcher) Error sending schedule set info.
PC9564E (Dispatcher) Schedule to unload not found.
PC9565I (Dispatcher) Schedule "%s" unloaded.
PC9566I (Dispatcher) All schedules unloaded.
PC9567I (Dispatcher) Schedule "%s" loaded.
PC9568E (Dispatcher) Schedule to reload not found.
PC9569E (Dispatcher) Schedule processing error:
PC9570D (Dispatcher) Scheduled job skipped.
PC9571E (Dispatcher) Scheduled job violation.
Reason: Running in violation of the current contingency:.
PC9572E (Dispatcher) Another Dispatcher is running.
Reason: Dispatcher was not started.
PC9573E (Dispatcher) Wrong check date format.
PC9574E (Dispatcher) Security error.
Reason: User either not logged in, or not authorized to work with the Dispatcher.
PC9575E (Dispatcher) "Show" request error.
Reason: Insufficient memory.
PC9576W (Dispatcher) Unknown command "%s", ignored.
PC9577E (Dispatcher) Start Job command error.
Reason: Schedule - Target combination not found:
PC9578E (Dispatcher) Start Job command error.
Reason: Schedule was suspended:
PC9579E (Dispatcher) Start Job command error.
Reason: Schedule is currently running:
PC9580E (Dispatcher) Start Job command error.
Reason: RUNTIME name for the Schedule not found:
PC9581I (Dispatcher) Suspended (initially or from the previous run):
PC9582E (Dispatcher) Communication error.
Reason: Error negotiating resources with the Storage Server.
PC9583E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed SUSPEND command.
Action: Free memory and restart Dispatcher.
PC9584E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed RESUME command.
Action: Free memory and restart Dispatcher.
PC9585E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed UNLOAD command.
Action: Free memory and restart Dispatcher.
PC9586E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed RELOAD command.
Action: Free memory and restart Dispatcher.
PC9587E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed STOP command.
Action: Free memory and restart Dispatcher.
PC9588E (Dispatcher) Job to remove is running:
PC9589E (Dispatcher) Job to remove not found:
PC9590E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed START command.
Action: Free memory and restart Dispatcher.
PC9591E (Dispatcher) Memory allocation error.
Reason: Memory allocation error processing delayed START JOB command.
Action: Free memory and restart Dispatcher.
PC9592E (Dispatcher) Error.in time spec.
Reason: JOB was not started.
PC9593E (Dispatcher) Wrong flag.
Reason: Wrong flag in the Dispatcher command.
PC9594E (Dispatcher) No UPSTREAMPATH.
Reason: Environment variable UPSTREAMPATH was not set. Please check your start up script or contact FDR/UPSTREAM Tech Support,
PC9595E (Dispatcher) Command not found.
Reason: Deferred Dispatcher command to REMOVE not found.
PC9596E (Dispatcher) Command not found.
Reason: Deferred Dispatcher command to Execute Now not found.
PC9597E (Dispatcher) Scheduled job skipped.
PC9598E (Dispatcher) Unable to get exclusive lock.
PC9599W (Dispatcher) Warning processing schedule sets.
SAN Drive File Errors
PC9875E Insufficient memory
Reason: While allocating the SAN drives file handle
Action: Close applications or free memory.
PC9876E Error opening SAN drives file.
Action: See subsequent messages.
PC9877E Error reading SAN drives file.
Action: See subsequent messages.
PC9878E Remote drive: %s not found
Action: Specify a different drive
PC9879E No remote drives found
PC9880E Error deleting SAN drives file.
PC9881E Local drive %s not found in mapping file.
Action: Respecify your SAN Drives mapping file.
PC9882E Error writing to the SAN Drives mapping file.
PC9883D Auto-association drive not found: %s, Serial: %s
Reason: Auto-association is not working
Action: Either specify the environment variable USNOSANASSOC or fix the drive access on this machine.
PC9884I SAN Express Auto-assoc. complete, %u tape drives
PC9885I SAN Express Direct not available on this machine.
Reason: If you wish to use the SAN Express Direct here you will need to zone tape drives to this machine.
PlugIn Errors
PC9900W (PlugIn) Can't load PlugIn
Reason: The specified PlugIn file cannot be loaded.
Action: Make sure the PlugIn is appropriate for the operating system you are using. If it is not, remove it from the PlugIn subdirectory.
PC9901W (PlugIn) Can't Load PlugIn Negotiate function
Reason: The specified PlugIn file does not have a fpbPlugInNegotiate function. The PlugIn is being unloaded.
Action: Make sure the DLL file is indeed a UPSTREAM PlugIn module. If it is not, remove it from the PlugIn subdirectory.
PC9902W (PlugIn) PlugIn negotiation process failed
Reason: The negotiation process for the specified PlugIn file failed. The PlugIn is being unloaded.
Action: Make sure the PlugIn is appropriate for the operating system you are using. If it is not, remove it from the PlugIn subdirectory. See additional messages for more information.
PC9903W (PlugIn) PlugIn version mismatch
Reason: The specified PlugIn file has a different version than US.EXE. The PlugIn is being unloaded.
Action: Obtain the version of the PlugIn module that matches the version of US.exe being used and copy it to the PlugIn subdirectory.
PC9904E (PlugIn) Can't allocate memory for a PlugIn
Reason: There is insufficient memory to allocate a PlugIn control block.
Action: See additional messages.
PC9905E (PlugIn) PlugIn for file spec not found
Reason: A file specification has referenced a PlugIn which is not loaded. It may be that the specified PlugIn is not appropriate for the operating system of this computer.
Action: See additional messages.
PC9906E (PlugIn) Invalid ACTION parameter for PlugIn
Reason: The ACTION parameter specified is invalid when used with a PlugIn.
Action: See additional messages.
PC9907E (PlugIn) Restore file specs use two or more PlugIns
Reason: The set of restore parameters has file specs that use two or more different PlugIns. A PlugIn restore may have any number of file specs, but all of the file specs must use the same PlugIn.
Action: Respecify.
PC9908E (PlugIn) Invalid BACKUPVERIFY
Reason: The ACTION parameter specified is invalid when used with a PlugIn.
Action: See additional messages.
PC9909E (PlugIn) Invalid CALCDASDSIZE
Reason: The CALCDASDSIZE parameter specified is invalid when used with a PlugIn.
Action: See additional messages.
PC9910E (PlugIn) Invalid FILETRANSFER
Reason: The FILETRANSFER parameter specified is invalid when used with a PlugIn.
Action: See additional messages.
PC9911E (PlugIn) Invalid LANWSNAME
Reason: The LANWSNAME parameter specified is invalid when used with a PlugIn.
Action: See additional messages.
PC9912W (PlugIn) PlugIn ID number not unique
Reason: The specified PlugIn file has an ID number that is the same as a PlugIn already loaded. unloaded.
Action: Remove the specified PlugIn module from the PlugIn subdirectory.
PC9915E (PlugIn) Function not exported
Reason: A file handle is being used for a function which is not exported. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9916E (PlugIn) PlugIn mismatch
Reason: A file handle is for a PlugIn which is not the active one. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9917E (PlugIn) Active PlugIn required
Reason: This function is using a PlugIn file handle but there is no active PlugIn. This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC9918E (PlugIn) PlugIn backup start error
Reason: One or more PlugIns had an error starting the backup. The backup profile and type follow.
Action: See additional messages.
PC9919E (PlugIn) PlugIn restore start error
Reason: One or more PlugIns had an error starting the restore. The backup profile and restore type follow.
Action: See additional messages.
PC9920E (PlugIn) VMware PlugIn Error:
PC9921I (PlugIn) VMware PlugIn Info:
NotesR5 PlugIn Errors
PC10100E (NotesR5) Can't run during performance test
Reason: Running a Notes backup during a performance test will affect logs and other items so it's disallowed.
PC10101E (NotesR5) Notes not loaded
Action: See additional messages
PC10102E (NotesR5) Function load error
Action: See additional messages
PC10103E (NotesR5) Initialization error
Action: See additional messages
PC10104E (NotesR5) File open bad mode
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC10105E (NotesR5) Insufficient memory
Reason: During Notes PlugIn processing.
Action: Free memory and/or disk, or close applications.
PC10106E (NotesR5) Not a NotesR5 file
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC10107E (NotesR5) Error getting Notes data directory
Reason: This is required for all UPSTREAM functions so, the plug in is disabled.
Action: See additional messages.
PC10108E (NotesR5) Error translating file name
Action: See additional messages.
PC10109E (NotesR5) Error creating database
Action: See additional messages.
PC10110E (NotesR5) Error opening database
Action: See additional messages.
PC10111E (NotesR5) Error in NSFBackupStart
Action: See additional messages.
PC10112E (NotesR5) Error in getting logging status
Action: See additional messages.
PC10113I (NotesR5) Database is not logged
Reason: Resulting backup file will not be recoverable.
Action: Use the notes administrator to make this a logged database or accept the inability to recover from transaction logs.
PC10114W (NotesR5) Circular logging
Reason: You have requested a notes backup with circular transaction logging. This will work, but UPSTREAM will not back up the transaction logs as they can not be recovered.
Action: Use the notes administrator to set standard logging or set LOGFILES=N in the PLUGINPARAMETERS.
PC10115E (NotesR5) Error getting transaction log style
Action: See additional messages.
PC10116E (NotesR5) Error beginning archive log list
Action: See additional messages.
PC10117E (NotesR5) Invalid LOGFILES parameter
Reason: The form for LOGFILES is: LOGFILES=Y
Action: Respecify.
PC10118E (NotesR5) Error getting first log file
Action: See additional messages.
PC10119E (NotesR5) Error getting next log file
Action: See additional messages.
PC10120E (NotesR5) Error creating log file spec
Action: Contact FDR/UPSTREAM Tech Support.
PC10121E (NotesR5) Error copying to new spec
Action: Contact FDR/UPSTREAM Tech Support.
PC10122E (NotesR5) Invalid LOG parameter
Reason: This parameter should not be entered manually
Action: Respecify.
PC10123E (NotesR5) Can't restart Notes backup
Action: Start from the beginning
PC10124W (NotesR5) Restart not supported
Reason: UPSTREAM will disable restart for this backup.
PC10125E (NotesR5) LOGFILES ONLY defined with logs
Reason: You specified a LOGFILES ONLY specification and you already have logfiles specified.
Action: Respecify.
PC10126E (NotesR5) Log file invalid on direct restore
Reason: You can not select log files to be restored directly; you must use the log files plug in parameters option. The file will be skipped.
Action: Respecify.
PC10127E (NotesR5) Error translating log file name
Action: See additional messages.
PC10128E (NotesR5) Notes specified a log file not found
Action: Contact FDR/UPSTREAM Tech Support.
PC10129E (NotesR5) Wildcard in search
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC10130E (NotesR5) Error getting change info size
Action: See additional messages.
PC10131E (NotesR5) Error taking database offline
Action: See additional messages.
PC10132E (NotesR5) Error starting apply of log changes
Action: See additional messages.
PC10133E (NotesR5) Error getting changed info
Action: See additional messages.
PC10134E (NotesR5) Error in applying changed info
Action: See additional messages.
PC10135E (NotesR5) Error deleting temporary file
Action: See additional messages.
PC10136E (NotesR5) Could not create temp file
Reason: The file name reported was the last name tried.
Action: See additional messages.
PC10137E (NotesR5) Inconsistant versions
Reason: The version of the Notes PlugIn does not match the version of UPSTREAM.
Action: Upgrade both to the latest version.
PC10138E (NotesR5) Server not logging
Reason: The server is not using transaction logging so your request to backup transaction logs can't be serviced.
Action: Turn on transaction logging on the server or turn off transaction logs for this backup.
PC10139E (NotesR5) Insufficient memory
Reason: While saving the transaction log file name, there was insufficient memory.
Action: Close applications or free memory.
PC10140D (NotesR5) No transaction logs to archive
PC10141W (NotesR5) No transaction logs to archive
Reason: There were no transaction logs to archive and you requested a transaction log only backup. No backup will be performed.
PC10142E (NotesR5) Log file not found
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC10143D (NotesR5) Can't determine if new backup needed
Reason: The following error was returned in a NSFIsNewBackupNeeded Notes call.
Action: See additional messages.
PC10144E (NotesR5) Invalid DBCHANGEDCHECK parameter
Reason: The form for DBCHANGEDCHECK is: DBCHANGEDCHECK= Y
Action: Respecify.
PC10145I (NotesR5) Database not logged (%s)
Reason: This database is not logged and will be backed up fully.
PC10146I (NotesR5) Database DBIID changed (%s)
Reason: This database's DBIID changed since the last backup and will be backed up fully.
PC10147E (NotesR5) Can't load required libraries
Reason: Notes requires a set of libraries by loaded and there was an error loading one of them.
Action: See subsequent messages.
PC10148E (NotesR5) OEM parameter must be Y or N
Action: Respecify.
PC10149D (NotesR5) Unexpected log file: %s in diff dir %s
Action: Call tech support.
PC10150D (NotesR5) Setting up log backup
Reason: This may be somewhat time consuming and there will be no display during this process.
PC10151D (NotesR5) Log already restored, skipping: %s
PC10152E (NotesR5) Error saving existing parameters
Reason: While setting up a backup using the NotesR5 PlugIn, there was an error saving your existing parameters.
Action: Verify your workpath is correct.
PC10153E (NotesR5) Error saving existing parameters
Reason: While setting up a backup using the NotesR5 PlugIn, there was an error saving your existing parameters.
Action: Verify your workpath is correct.
PC10154D (NotesR5) Error setting attributes
Action: See additional messages.
PC10155D (NotesR5) Error resetting file information
Action: See additional messages.
PC10156W (NotesR5) Error completing log backup
Reason: While attempting to notify Notes that the log file backup had completed, there was an internal error.
Action: See additional messages.
PC10157E (NotesR5) Can't restore log files only
Reason: Log files must be applied to specific restored Notes databases.
Action: Respecify.
PC10158E (NotesR5) Insufficient memory
Reason: While attempting to save a restored database name for later log file application, there was insufficient memory.
Action: Close applications or free memory.
PC10159W (NotesR5) Error bringing database online
Reason: There was a Notes error bringing the specified database back online after a DB restore.
Action: See Notes return code.
PC10160E (NotesR5) Insufficient memory
Reason: While attempting to allocate memory for the list of databases to pass to the Notes log recovery facility there was insufficient memory.
Action: Close applications or free memory.
PC10161W (NotesR5) Error bringing database online
Reason: There was a Notes error bringing the specified database back online after applying transaction logs following a restore.
Action: See Notes return code.
PC10162E (NotesR5) Error recovering databases from logs
Reason: There was a Notes error recovering the selected databases from the logs.
Action: See Notes return code
PC10163D (NotesR5) Recovery complete
PC10164E (NotesR5) Error setting field
Reason: During log file recovery there was an error setting one of the UPSTREAM fields.
Action: Contact FDR/UPSTREAM Tech Support.
PC10165E (NotesR5) Must not restore logs directly
Reason: You specified that the internal name for a transaction log file be restored. Transaction logs can only be restored by selecting transaction logs in the plug in parameters.
Action: Notes will restore the file when necessary. If you truly want to manually restore a transaction log, you can set the environment variable USNOTESALLOWLOGRESTORE to any value and rerun the restore request.
PC10166D (NotesR5) Beginning log file recovery
Reason: Subsequent restores are log files specified by Notes. For GUI 32-bit Windows, the restore dialogs will not be associated with the main window. This is due to the way that Notes requests log files and can not be avoided.
PC10167E (NotesR5) Error saving plug in parameters
Action: See additional messages.
PC10168W (NotesR5) Error in a pending log force
Reason: After completing the backup of the existing logs (which didn't require a force) when we attempt to restart the log search so that we can perform the force we got a Notes error.
Action: See additional messages.
PC10169E (NotesR5) Bad WORKPATH
Reason: The PLUGINPARAMETERS value WORKPATH is invalid.
Action: Respecify.
PC10170E (NotesR5) Segmenting Notes, file not found
Reason: When reopening the file below during segmentation the original file handle was not found:
Action: Contact FDR/UPSTREAM Tech Support.
PC10171E No non pending log entries
Reason: This is an internal FDR/UPSTREAM error.
Action: Contact FDR/UPSTREAM Tech Support.
PC10172D (NotesR5) Error getting attributes
Action: See additional messages.
PC10173E (NotesR5) Recovery time specified wrong
Reason: You must specify recovery time as 14 numeric digits: YYYYMMDDHHMMSS.
Action: Respecify.
PC10174E (NotesR5) Recovery time specified wrong
Reason: The date is invalid.
Action: Respecify.
PC10175E (NotesR5) Recovery time can't be used
Reason: When attempting to convert the specified recovery time to Notes format, there was a non-specific Notes error.
Action: Respecify.
PC10176E (NotesR5) Recovery time bad
Reason: Recovery time specifies a time before 1/1/70.
Action: Respecify.
PC10177I (NotesR5) Using recovery time: %s
PC10178E (NotesR5) Directory environment missing
Reason: The "Directory" environment variable is missing from the NOTES.INI file and there is no NOTES_DATA_DIRECTORY environment variable.
Action: Set the NOTES_DATA_DIRECTORY environment variable to the main Domino data directory.
PC10179E (NotesR5) TRANSLOG_Path environment missing
Reason: The "TRANSLOG_Path" environment variable is missing from the NOTES.INI file or the environment.
Action: Set the TRANSLOG_Path environment variable.
PC10180E (NotesR5) No transaction logs found
Reason: If you delete or rename the Domino transaction log control file "nlogctrl.lfh", or make a major transaction log configuration change, the counter file that UPSTREAM uses will be out of sync with the existing transaction logs.
Action: Delete the file "LASTARCH.US" in the Domino transaction log directory and perform a new full backup.
PC10181E (NotesR5) Non log requires a destination
Reason: An active log or notes.ini file is backed up to a pseudo directory (a made up name). You must specify a proper destination. Note that active logs or the notes.ini file should only be restored in the event of a disaster.
Action: Respecify.
PC10182E (NotesR5) notes.ini not found in USNOTESINI
Reason: The USNOTESINI environment variable was set, but the notes.ini file was not found there.
Action: Properly specify USNOTESINI.
PC10183E (NotesR5) notesini not found
Reason: Since you specified a log file backup, UPSTREAM attempts to locate the notes.ini file. It looked for the USNOTESINI environment variable, it looked in the "Directory" notes environment variable, and it looked in the directory above that variable but was still unable to find the file.
Action: Specify USNOTESINI in your job stream or as an environment variable pointing to the fully qualified file name of the notes.ini file.
PC10184E (NotesR5) Error creating Notes archive file
Reason: There was an error creating the file used to hold the last backup archived.
Action: See additional messages.
PC10185E (NotesR5) Error opening Notes archive file
Reason: There was an error opening the file used to hold the last backup archived.
Action: See additional messages.
PC10186E (NotesR5) Error writing Notes archive file
Reason: There was an error writing to the file used to hold the last backup archived,
Action: See additional messages.
PC10187E (NotesR5) Error reading Notes archive file
Reason: There was an error reading the file used to hold the last backup archived,
Action: See additional messages.
PC10188I (NotesR5) Archive file not found.
Reason: UPSTREAM keeps track of the last archived log file in the following name. If UPSTREAM has yet to archive a log file, this is a normal message; otherwise this is an error and extra log files may be backed up.
PC10189E (NotesR5) LOGBACKUPPROFILE bad.
Reason: The LOGBACKUPPROFILE Notes R5 PlugIn parameter is an override for the backup profile if you are using multiple copies of UPSTREAM for your backups and the log file is backed up in another spec. This must follow the backup profile rules.
Action: Respecify.
PC10190D (NotesR5) User requested manual log restore
Reason: The user specified the USNOTESALLOWLOGRESTORE environment variable which allows an archive log to be restored. Normally, these are only restored when Notes requests them and then it is automatic.
PC10191I (NotesR5) Error opening to check DBIID
Reason: There was an error opening a database to check it's DBIID to determine if the file had changed. UPSTREAM will attempt to include it in the backup.
PC10192I (NotesR5) Error opening DBIID file for read
Reason: There was an error opening the UPSTREAM database's DBIID file.
Action: See additional messages.
PC10193I (NotesR5) Error opening DBIID file for write
Reason: There was an error opening the UPSTREAM database's DBIID file.
Action: See additional messages.
PC10194I (NotesR5) Error reading DBIID file
Reason: There was an error reading the UPSTREAM database's DBIID file.
Action: See additional messages.
PC10195I (NotesR5) Error writing DBIID file
Reason: There was an error reading the UPSTREAM database's DBIID file.
Action: See additional messages.
PC10196I (NotesR5) No prior logged backup for %s - it will be backed up now
Reason: The DBIID file was not found for this database. This is generally because this is a non-logged database. The database will now be backed up.
PC10197I (NotesR5) Error opening database to check DBIID
Reason: There was a Notes error opening the database to check the DBIID to determine if the database needs to be fully backed up. Thus, the full database will be backed up.
PC10198I (NotesR5) Error getting log info checking DBIID
Reason: There was a Notes error retrieving the log info for a database. Thus the full database will be backed up.
PC10199W (NotesR5) Error above for file: %s
MSSQL PlugIn Errors
PC10200E (MSSQL) Invalid action type
Reason: The specified action type is not a backup, a restarted backup, a restore or a restarted restore. This action is invalid for the MSSQL PlugIn.
Action: Change the action type when using the MSSQL PlugIn.
WinSS PlugIn Errors
PC10234E (WinSS) Hardlink data file missing on backup
Reason: A VSS component file was part of a hardlink file set at the time of backup. During this restore, one of the real file names of this hardlink file set was restored, but the hardlink data file that contains the real file data was not restored, probably because it is was not backed up. This is an UPSTREAM internal error. The first file name listed is the real file name that was restored. The second file name listed is the hardlink data file which was not restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC10235I (WinSS) VSS snapshot set not created
Reason: VSS was not used to snapshot any of the volumes referenced by this backup. A VSS snapshot set was not created.
PC10236E (WinSS) Can't send GetFileInformation request
Reason: An error occurred while sending a GetFileInformation request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC10237I (WinSS) Finished a VSS backup
Reason: Finished the VSS backup.
PC10238I (WinSS) Finished a VSS component file restore
Reason: The VSS components that own the VSS component files just restored have been notified of the restore status. The VSS restore process for these component files is now complete.
PC10239I (WinSS) Finished a volume file restore
Reason: The VSS restore process for a set of non-component files is now complete.
PC10240I (WinSS) Finishing a VSS backup
Reason: Finishing the VSS backup.
PC10241I (WinSS) Finishing a VSS component file restore
Reason: The restore of one or more VSS component files has completed either successfully or unsuccessfully. Performing a status update for the associated VSS components.
PC10242I (WinSS) Finishing a volume file restore
Reason: One or more volume files (files that do not belong to any VSS components) have been restored either successfully or unsuccessfully. Finishing the VSS restore.
PC10243W (WinSS) Component backup has expired
Reason: The backup of the specified component has expired on the specified date and time. A restore of this component may be successful, but the component's data may be unusable after the successful restore.
Action: Restore this component from a more recent backup.
PC10244D (WinSS) Component backup will expire
Reason: The backup of the specified component will expire on the specified date and time. A restore of this component after its expiration date/time may be successful, but the component's data may be unusable after the successful restore.
Action: Do not attempt to restore this component after its expiration date/time.
PC10247W (WinSS) File rename operations are pending
Reason: One or more file rename operations are pending for the computer that is to be backed from or restored to. This may result in a logically inconsistent backup or a failed restore.
Action: Always reboot the computer immediately after any file rename operations are scheduled in the PendingFileRenameOperations value of the HKLM\SYSTEM\CurrentControlSet\Control\Session Manger registry key.
PC10248E (WinSS) Can't allocate writer options
Reason: While attempting to allocate memory for the writer options, there was insufficient memory.
Action: Contact FDR/UPSTREAM Tech Support.
PC10249W (WinSS) Writer option invalid
Reason: The specified writer option is invalid for the specified writer name.
Action: Remove or respecify the writer option.
PC10250W (WinSS) Writer option ignored
Reason: A specified writer option was ignored in favor of another writer option which takes precedence for the specified writer.
Action: Remove or respecify the writer option.
PC10251I (WinSS) Locating the VSS snapshots
Reason: Locating the VSS snapshots for a restarted backup.
PC10252I (WinSS) Creating the VSS snapshots
Reason: Creating the VSS snapshots for a new backup.
PC10253I (WinSS) Restoring the disk configuration
Reason: Restoring the disk configuration.
PC10254I (WinSS) Preparing for a component restore
Reason: Preparing for a component restore.
PC10255I (WinSS) Preparing for a volume restore
Reason: Preparing for a volume restore.
PC10256E (WinSS) Can't allocate component additional data
Reason: While attempting to allocate memory for the additional data for a component, there was insufficient memory.
Action: Close applications or free memory.
PC10257I (WinSS) EToA table name automatically changed
PC10258I (WinSS) AToE table name automatically changed
PC10259I (WinSS) Different EToA table or table name
Reason: The current backup or restore specifies one EBCDIC to ASCII table or table name, but the previous backup specified another. The EBCDIC to ASCII table or table name from the previous backup will be used.
Action: To change the EToA table name used for a backup, the backup must be a first-time full.
PC10260I (WinSS) Different AToE table or table name
Reason: The current backup or restore specifies one ASCII to EBCDIC table or table name, but the previous backup specified another. The ASCII to EBCDIC table or table name from the previous backup will be used.
Action: To change the AToE table name used for a backup, the backup must be a first-time full.
PC10261E (WinSS) Can't modify the EToA table name
Reason: An error occurred while attempting to dynamically modify the EBCTOASC non-repeating parameter.
Action: The specified EToA table name was probably not found in the UPSTREAM directory. Copy it from the UPSTREAM\Samples directory or from the UPSTREAM installation CD.
PC10262E (WinSS) Can't modify the AtoE table name
Reason: An error occurred while attempting to dynamically modify the ASCTOEBC non-repeating parameter.
Action: The specified AToE table name was probably not found in the UPSTREAM directory. Copy it from the UPSTREAM\Samples directory or from the UPSTREAM installation CD.
PC10263I (WinSS) The disk configuration restore was successful
Reason: The FDR/UPSTREAM Recovery disk configuration restore was successful.
PC10264E (WinSS) The disk configuration restore failed
Reason: The FDR/UPSTREAM Recovery disk configuration restore failed.
Action: Check previous messages.
PC10265E (WinSS) Invalid action for ASR=Y
Reason: PLUGINPARAMETERS ASR=Y was specified for an action other than an UPSTREAM Recovery restore.
Action: Do not specify ASR=Y for the PLUGINPARAMETERS.
PC10266E (WinSS) Invalid file spec for ASR=Y
Reason: The ASR=Y PLUGINPARAMETERS subparameter was specified for a file spec which was either not the first file spec or a file spec for something other than .:\ASR\*.
Action: Do not specify ASR=Y for the PLUGINPARAMETERS.
PC10267E (WinSS) Can't get virtual server status
Reason: An error occurred while attempting to check if the following computer name is a virtual server of a cluster.
PC10268E (WinSS) Can't send SetVolumeHardLinkFRNs request to USW2KAgt
Reason: An error occurred while sending a SetVolumeHardLinkFRNs request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC10269E (WinSS) Invalid component file spec
Reason: An invalid component file spec was specified.
Action: Respecify the component file spec.
PC10270E (WinSS) WinSS file name not found
Reason: A WinSS component file name was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC10271E (WinSS) FRN file name not found
Reason: A FRN file name was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC10272E (WinSS) Volume not found
Reason: A volume drive character was not found.
Action: Contact FDR/UPSTREAM Tech Support.
PC10273E (WinSS) Can't write hardlink restore file
Reason: An error occurred while attempting to write to the hardlink restore file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10274E (WinSS) Can't flush hardlink restore file
Reason: An error occurred while attempting to flush the file buffers to the hardlink restore file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10275E (WinSS) Can't open hardlink restore file
Reason: An error occurred while attempting to open the hardlink restore file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10276E (WinSS) Can't read hardlink restore file
Reason: An error occurred while attempting to read the hardlink restore file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10277E (WinSS) Hard link component info mismatch
Reason: A component file with multiple file names (hard links) was found and the owning component has not informed UPSTREAM of all of the file names.
Action: Contact FDR/UPSTREAM Tech Support.
PC10278E (WinSS) Can't find hard link info
Reason: An internal error occurred while opening a hard linked file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10279W (WinSS) Full merge or incremental contains all files
Reason: A problem occurred while processing the changed files for the following volume. As a result, this Full Merge or Merge Incremental backup will include all of the files on the volume whether they have changed or not.
Action: The problem is self-correcting. Your next Full Merge or Merge Incremental backup will correctly contain only those files which have changed.
PC10280D (WinSS) Hard links from prior backups restored
Reason: A set of hard linked files were restored that now includes hard links from prior backup versions that were not present at the time of the backup version from which the restore was performed.
PC10281E (WinSS) Can't allocate hard link FRN info
Reason: While attempting to allocate memory for the hard link FRN information, there was insufficient memory.
Action: Close applications or free memory.
PC10282E (WinSS) Can't allocate hard link info
Reason: While attempting to allocate memory for the hard link information, there was insufficient memory.
Action: Close applications or free memory.
PC10283E (WinSS) Can't allocate backup hard link info
Reason: While attempting to allocate memory for the backup hard link information, there was insufficient memory.
Action: Close applications or free memory.
PC10284W (WinSS) Can't restore hard link file more than once
Reason: Two or more of the restore include file specifications reference the same hard link file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10285E (WinSS) Can't restore hard link file to mult drives
Reason: Two or more of the restore include file specifications reference different hard links to the same common file and specify that they are to be restored to different volumes. This is not supported.
Action: Contact FDR/UPSTREAM Tech Support.
PC10286E (WinSS) Can't allocate hard link restore info
Reason: While attempting to allocate memory for the hard link restore information, there was insufficient memory.
Action: Close applications or free memory.
PC10287E (WinSS) Can't delete a temporary hard link file
Reason: An error occurred while attempting to delete a restored hard link temporary file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10288E (WinSS) Can't rename a temporary hard link file
Reason: An error occurred while attempting to rename a hard link data file to one of its real hard link file names.
Action: Contact FDR/UPSTREAM Tech Support.
PC10289E (WinSS) Can't create a hard link for a restored file
Reason: An error occurred while attempting to create a hard link between a real hard link file name and its hard link data file.
Action: Contact FDR/UPSTREAM Tech Support.
PC10290E (WinSS) A hard linked file was not restored
Reason: An error occurred during the restore of a hard link file.
Action: See additional messages.
PC10291D (WinSS) Incomplete hard links restored
Reason: One or more files in a set of files that were hard linked together at the time of the backup were either not included in the restore, restored unsuccessfully or restored successfully but not relinked successfully. Following is the restore status of all of the files in the set.
PC10292E (WinSS) Can't allocate common extra data for backup
Reason: While attempting to allocate memory for the hard link common extra data for a file during backup, there was insufficient memory.
Action: Close applications or free memory.
PC10293E (WinSS) Can't send CheckComponentVerification request to USW2KAgt
Reason: An error occurred while sending a CheckComponentVerification request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC10294E (WinSS) Invalid file common extra data
Reason: An invalid set of common extra data was received for a file during the restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10295E (WinSS) Invalid directory common extra data
Reason: An invalid set of common extra data was received for a directory during the restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10296E (WinSS) Can't create profile directory
Reason: An error occurred while creating the profile directory for the FDR/UPSTREAM Windows Agent.
Action: Contact FDR/UPSTREAM Tech Support.
PC10297E (WinSS) Can't open HKEY_LOCAL_MACHINE key
Reason: While attempting to open the HKEY_LOCAL_MACHINE registry key on the specified machine, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC10298E (WinSS) Can't create profile key
Reason: While attempting to create the following key name on the specified machine, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC10299E (WinSS) Can't restore profile key
Reason: While attempting to restore the following key name on the specified machine, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
MSSQL PlugIn Errors
PC10300E (MSSQL) Can't release a row
Reason: An error occurred while attempting to release a row from a rowset that was created by an SQL command.
Action: Contact FDR/UPSTREAM Tech Support.
PC10301I (MSSQL) Microsoft SQL Server Message
Reason: The following message was issued by the Microsoft SQL Server in response to a SQL command.
Action: If your interpretation of this SQL message is that an error condition exists, contact your SQL Server DBA for further analysis.
PC10302I (MSSQL) Microsoft SQL Server Error
Reason: The following error was issued by the Microsoft SQL Server in response to a SQL command.
Action: Determine if an error condition exists on the Microsoft SQL Server.
PC10303E (MSSQL) Can't restore master database with others
Reason: A file spec was found which attempts to restore the master database along with files specs for other databases. This is not allowed. The master database must be restored by itself while the Microsoft SQL server is in single user mode and before any other databases are restored.
Action: Do not attempt to restore the master database with any other database.
PC10304E (MSSQL) Insufficient memory for row
Reason: While attempting to allocate memory for a row, there was insufficient memory.
Action: Close applications or free memory.
PC10305E (MSSQL) Insufficient memory for field
Reason: While attempting to allocate memory for a field, there was insufficient memory.
Action: Close applications or free memory.
PC10306E (MSSQL) Insufficient memory for table
Reason: While attempting to allocate memory for a table, there was insufficient memory.
Action: Close applications or free memory.
PC10307E (MSSQL) Error on SQL command
Reason: While processing a SQL command, an error occurred.
Action: Contact FDR/UPSTREAM Tech Support.
PC10308E (MSSQL) Insufficient memory for results
Reason: While attempting to allocate memory for a set of database query results, there was insufficient memory.
Action: Close applications or free memory.
PC10309E (MSSQL) Can't add a SQL command to buffer
Reason: While processing a SQL command, an error occurred which prevented the SQL command from being added to the SQL command buffer.
Action: Contact FDR/UPSTREAM Tech Support.
PC10310E (MSSQL) Can't send a SQL command to server
Reason: While processing a SQL command, an error occurred which prevented the SQL command from being sent to the Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10311E (MSSQL) Can't get login record
Reason: An error occurred while attempting to connect to a Microsoft SQL Server which prevented the allocation of login record.
Action: Contact FDR/UPSTREAM Tech Support.
PC10312E (MSSQL) Can't set Login ID in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10313E (MSSQL) Can't set Login Password in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10314E (MSSQL) Can't set trusted connection in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10315E (MSSQL) Can't set timeout in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10316E (MSSQL) Can't set DB-Library version in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10317E (MSSQL) Can't set host name in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10318E (MSSQL) Can't set application name in login record
Reason: An error occurred while building the login record required for opening a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10319E (MSSQL) Can't open a Microsoft SQL Server connection
Reason: An error occurred while attempting to open a connection to a Microsoft SQL Server. This connection failure may be due to an attempt to use a trusted connection (i.e. not supplying a SQL Server Login ID and Passord). In this case, retry the connection using an explicit connection by supplying a SQL Server Login ID and Password.
Action: Contact FDR/UPSTREAM Tech Support if an explicit connection does not work.
PC10320E (MSSQL) Can't close a Microsoft SQL Server connection
Reason: An error occurred while attempting to close a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10321E (MSSQL) Can't perform a SQL query
Reason: A error occurred while performing a query against a table in a Microsoft SQL Server database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10322E (MSSQL) One or more PLUGINPARAMETERS are invalid
Reason: One or more of the individual parameters in the PLUGINPARAMETERS parameter are invalid.
Action: Specify a correct PLUGINPARAMETERS parameter.
PC10323E (MSSQL) Invalid MERGE type
Reason: The merge type specified by the MERGE parameter is invalid. It must be a value other than 0.
Action: Contact FDR/UPSTREAM Tech Support.
PC10324E (MSSQL) Duplicate server/databases in file specs
Reason: Two or more file specs reference the same Microsoft SQL Server and database combination.
Action: Remove the duplicate server/database file spec. This may also be caused by the order in which you specified your file spec. Reorder your file specs so that all of the file specs which do not use PlugIns come before those that do.
PC10325E (MSSQL) Error setting default file spec parameters
Reason: An internal UPSTREAM error occurred while attempting to set a number of default file spec parameters.
Action: Contact FDR/UPSTREAM Tech Support.
PC10326E (MSSQL) Can't enumerate Microsoft SQL Servers
Reason: An error occurred while attempting to get a list of available Microsoft SQL Servers. If this message contains the text "dbserverenum return code = 2" then you have a problem with your SQL Server Client Network configuration. Make sure that you have the correct setting specified for SQL Client network library.
Action: Contact FDR/UPSTREAM Tech Support.
PC10327E (MSSQL) Database backup or restore error
Reason: One or more errors occurred while attempting to backup or restore a Microsoft SQL Server database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10328I (MSSQL) Database backup or restore successful
Reason: A backup or restore of a Microsoft SQL Server database was successful. A number of messages or errors from the Microsoft SQL Server may follow, but any error conditions described may be safely ignored as they did not effect the backup or restore.
Action: You may want to examine the messages and errors from the Microsoft SQL Server to determine if an internal Microsoft SQL Server condition needs attention.
PC10329E (MSSQL) Can't parse Microsoft SQL Server version
Reason: An error occurred while attempting to parse the version information for a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10330E (MSSQL) A required DLL cannot be loaded
Reason: An error occurred while attempting to load a DLL. The name of the DLL follows. This DLL is required by the MSSQL PlugIn to access the Microsoft SQL Servers.
Action: Contact FDR/UPSTREAM Tech Support.
PC10331E (MSSQL) A DLL function cannot be loaded
Reason: One or more of the API functions exported by the NTWDBLIB.DLL required by the MSSQL PlugIn could not be loaded.
Action: Contact FDR/UPSTREAM Tech Support.
PC10332E (MSSQL) Can't open a semaphore
Reason: An operating system error occurred while attempting to open a semaphore needed for the proper operation of the MSSQL PlugIn.
Action: Contact FDR/UPSTREAM Tech Support.
PC10333E (MSSQL) Can't initailize the DB-Library interface
Reason: An error occurred while initializing the DB-Library interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10334E (MSSQL) An error occurred on a version inquiry
Reason: An error occurred while performing a version inquiry operation to validate the specified backup version from which to restore.
PC10335E (MSSQL) An error occurred reading specified version
Reason: An internal UPSTREAM error occurred while reading the version information for the specified backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC10336E (MSSQL) The specified version cannot be found
Reason: The backup version specified by either the VERSIONDATE or LATESTVERSION parameters does not exist.
Action: Specify a different backup version from which to perform the restore.
PC10337E (MSSQL) An error occurred reading a file spec
Reason: An internal UPSTREAM error occurred while reading the file spec information for the specified backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC10338E (MSSQL) A specified file spec cannot be found
Reason: A file spec specified by the FILES parameter does not exist.
Action: Specify a different file spec to be restored.
PC10339E (MSSQL) Insufficient memory for version
Reason: While attempting to allocate memory for a version, there was insufficient memory.
Action: Close applications or free memory.
PC10340E (MSSQL) An error occurred reading a file spec
Reason: An internal UPSTREAM error occurred while reading the file spec information for a full merge backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC10341E (MSSQL) A full merge version cannot be found
Reason: A full merge version previous to the version specified by either the VERSIONDATE or LATESTVERSION parameters does not exist.
Action: Specify a different backup version from which to perform the restore.
PC10342E (MSSQL) An error occurred reading full merge version
Reason: An internal UPSTREAM error occurred while reading the version information for a full merge backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC10343E (MSSQL) Error on a 'use database' command
Reason: An error occurred while attempting to change the active Microsoft SQL Server database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10344E (MSSQL) Can't get the database size
Reason: An error occurred while attempting to get the size of a Microsoft SQL Server database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10345E (MSSQL) Can't parse the database size
Reason: An error occurred while attempting to parse the size of a Microsoft SQL Server database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10346E (MSSQL) Invalid file mode
Reason: An internal UPSTREAM error occurred with the file mode while attempting to open up a named pipe.
Action: Contact FDR/UPSTREAM Tech Support.
PC10347E (MSSQL) Invalid PLUGINPARAMETERS parameter
Reason: The PLUGINPARAMETERS parameter is invalid.
Action: Specify a correct PLUGINPARAMETERS parameter.
PC10348E (MSSQL) Insufficient memory for file info
Reason: While attempting to allocate memory for a set of file information, there was insufficient memory.
Action: Close applications or free memory.
PC10349E (MSSQL) Can't start the backup/restore thread
Reason: An operating system error occurred while attempting to start another thread to issue a SQL Server command to start a backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10350E (MSSQL) The database is in use
Reason: A restore was started for a SQL Server database that is currently in use by another process.
Action: Make sure the database is not in use before retrying the restore.
PC10351E (MSSQL) Can't get the connection process info
Reason: An error occurred while attempting to get the process information for a connection to a Microsoft SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10352E (MSSQL) Can't open cluster
Reason: An error occurred while attempting to open the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10353E (MSSQL) Can't start cluster resource enumeration
Reason: An error occurred while attempting to start a cluster resource enumeration for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10354E (MSSQL) Can't enumerate cluster resource
Reason: An error occurred while attempting to enumerate a cluster resource for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10355E (MSSQL) Can't open cluster resource
Reason: An error occurred while attempting to open a cluster resource for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10356E (MSSQL) Can't get cluster resource properties
Reason: An error occurred while attempting to get the properties for a cluster resource for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10357E (MSSQL) Can't parse cluster resource property
Reason: An error occurred while attempting to parse the Name property value from the list of properties for a cluster resource for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10358E (MSSQL) Can't determine cluster node name
Reason: An error occurred while attempting to determine the name of the cluster node that the specified SQL Server virtual machine is hosted on.
Action: Contact FDR/UPSTREAM Tech Support.
PC10359I (MSSQL) SQL command executed successfully
Reason: The following SQL command was executed successfully.
PC10360E (MSSQL) Can't restore msdb database with others
Reason: A file spec was found which attempts to restore the msdb database along with files specs for other databases. This is not allowed. The msdb database must be restored by itself while the Microsoft SQL server is in single user mode and before any other databases are restored.
Action: Do not attempt to restore the msdb database with any other database.
PC10361E (MSSQL) Invalid Director request type received
Reason: A PlugIn Request Type was received from the Director which is invalid. The invalid PlugIn Request Type follows.
Action: Contact FDR/UPSTREAM Tech Support.
PC10362E (MSSQL) Can't get cluster resource state
Reason: An error occurred while attempting to get the state of a cluster resource for the specified cluster name.
Action: Contact FDR/UPSTREAM Tech Support.
PC10363E (MSSQL) Can't execute a SQL command
Reason: An error occurred while attempting to execute a SQL command on the specified SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10364E (MSSQL) Can't open USW2KAgt pipe
Reason: An error occurred while attempting to open a named pipe connection to USW2KAgt for the purpose of performing a SQL Server database backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10365E (MSSQL) Can't write to USW2KAgt pipe
Reason: An error occurred while attempting to write data to a USW2KAgt named pipe connection for the purpose of performing a SQL Server database backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10366E (MSSQL) Can't read from USW2KAgt pipe
Reason: An error occurred while attempting to read data from a USW2KAgt named pipe connection for the purpose of performing a SQL Server database backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC10367E (MSSQL) Can't create server interface
Reason: An error occurred while attempting to create an interface to the specified SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10368E (MSSQL) Can't set login type
Reason: An error occurred while attempting to set the login type for the specified SQL Server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10369E (MSSQL) Can't get server name
Reason: An error occurred while attempting to get the server name of a connected SQL Server\Instance
Action: Contact FDR/UPSTREAM Tech Support.
PC10370E (MSSQL) Can't get instance name
Reason: An error occurred while attempting to get the instance name of a connected SQL Server\Instance
Action: Contact FDR/UPSTREAM Tech Support.
PC10371E (MSSQL) Can't query connection
Reason: An error occurred while attempting to query a SQL server connection.
Action: Contact FDR/UPSTREAM Tech Support.
PC10372E (MSSQL) Can't open HKEY_LOCAL_MACHINE key
Reason: An error occurred while attempting to open the HKEY_LOCAL _MACHINE key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC10373E (MSSQL) Can't open Cluster key
Reason: An error occurred while attempting to open the HKEY_LOCAL _MACHINE\Cluster key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC10374E (MSSQL) Can't read cluster name
Reason: An error occurred while attempting to read the ClusterName value of the HKEY_LOCAL _MACHINE\Cluster key in the registry.
Action: Contact FDR/UPSTREAM Tech Support.
PC10375E (MSSQL) SQL Client interface not available
Reason: An error occurred while attempting to find a suitable interface (API) with which to connect to the specified server.
Action: Contact FDR/UPSTREAM Tech Support.
PC10376E (MSSQL) Insufficient memory for SQL command
Reason: While attempting to allocate memory for a SQL command, there was insufficient memory.
Action: Close applications or free memory.
PC10377E (MSSQL) Can't create a file spec
Reason: An error occurred while attempting to create a new file spec.
Action: Contact FDR/UPSTREAM Tech Support.
PC10378E (MSSQL) Can't modify a file spec
Reason: An error occurred while attempting to modify a new file spec.
Action: Contact FDR/UPSTREAM Tech Support.
PC10379W (MSSQL) Invalid logical and/or file name
Reason: While attempting to create an exclude file spec as a place holder for a database's logical name and file name, the logical name and/or file name were found to be invalid. This does not cause the backup to fail, but may limit the type of restore that you can perform for this database.
Action: Contact FDR/UPSTREAM Tech Support.
PC10380E (MSSQL) RESTORE command buffer overflow
Reason: While attempting to append a MOVE clause to the RESTORE command buffer, the buffer was too small. This happens when too many MOVE clauses are specified. MOVE clauses are specified in your set of restore parameters with one or more exclude file specs associated with the include file spec for the database to be restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC10381E (MSSQL) Invalid exclude spec (MOVE clause)
Reason: While parsing an exclude file spec (containing the information for a RESTORE command MOVE clause), the FILES and/or DESTINATION parameters were found to be formatted incorrectly or the PATHNAME parameter is blank. The format for the FILES parameter must be "originalfilename", the format for the DESTINATION parameter must be "newfilename" and the logical names must match. The PATHNAME value must match the FILES parameter for one of the include file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC10382E (MSSQL) Insufficient memory for connection object
Reason: While attempting to allocate memory for a connection object, there was insufficient memory.
Action: Close applications or free memory.
PC10383E (MSSQL) Can't create IDBInitialize interface
Reason: An error occurred while attempting to create an IDBInitialize interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10384E (MSSQL) Can't get IDBProperties interface
Reason: An error occurred while attempting to get an IDBProperties interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10385E (MSSQL) Can't set connection properties
Reason: An error occurred while attempting to set the properties for opening a SQL connection.
Action: Contact FDR/UPSTREAM Tech Support.
PC10386E (MSSQL) Can't connect to SQL server
Reason: An error occurred while attempting to connect to the specified server. If you have specified a SQL login and password, verify that these are correct.
Action: Contact FDR/UPSTREAM Tech Support.
PC10387E (MSSQL) Can't get IDBCreateSession interface
Reason: An error occurred while attempting to get an IDBCreateSession interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10388E (MSSQL) Can't create session
Reason: An error occurred while attempting to create a session for an open SQL connection
Action: Contact FDR/UPSTREAM Tech Support.
PC10389E (MSSQL) Can't get rows
Reason: An error occurred while attempting to get a set of rows from a rowset which is the result of a command.
Action: Contact FDR/UPSTREAM Tech Support.
PC10390E (MSSQL) Can't release rows
Reason: An error occurred while attempting to to release a set of rows of a rowset which is the result of a command.
Action: Contact FDR/UPSTREAM Tech Support.
PC10391E (MSSQL) Can't restart rowset position
Reason: An error occurred while attempting to reposition to the beginning of a rowset.
Action: Contact FDR/UPSTREAM Tech Support.
PC10392E (MSSQL) Can't get IColumnsInfo interface
Reason: An error occurred while attempting to get an IColumnsInfo interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10393E (MSSQL) Can't get column information
Reason: An error occurred while attempting to get the information about the columns of a rowset.
Action: Contact FDR/UPSTREAM Tech Support.
PC10394E (MSSQL) Insufficient memory for bindings
Reason: While attempting to allocate memory for a set of bindings, there was insufficient memory.
Action: Close applications or free memory.
PC10395E (MSSQL) Can't get IAccessor interface
Reason: An error occurred while attempting to get an IAccessor interface.
Action: Contact FDR/UPSTREAM Tech Support.
PC10396E (MSSQL) Can't create accessor
Reason: An error occurred while attempting to create an accessor needed for getting data from a command.
Action: Contact FDR/UPSTREAM Tech Support.
PC10397E (MSSQL) Insufficient memory for row data
Reason: While attempting to allocate memory for a set of row data, there was insufficient memory.
Action: Close applications or free memory.
PC10398E (MSSQL) Can't get row
Reason: An error occurred while attempting to get a row from a rowset which is the result of a command.
Action: Contact FDR/UPSTREAM Tech Support.
PC10399E (MSSQL) Can't get row data
Reason: An error occurred while attempting to get the data from a row of a rowset which is the result of a command.
Action: Contact FDR/UPSTREAM Tech Support.
WinSS PlugIn Errors
PC11001E (WinSS) Can't delete drive mapping
Reason: An error occurred while attempting to delete a symbolic DOS Device drive mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC11002E (WinSS) Can't find the volume for a file name
Reason: An error occurred which prevented finding the volume information for the following file name.
Action: Contact FDR/UPSTREAM Tech Support.
PC11003E (WinSS) Can't define drive mapping
Reason: An error occurred while attempting to define a symbolic DOS Device drive mapping.
Action: Reboot the system and try the backup again.
PC11004E (WinSS) Can't open a USW2KAgt named pipe connection
Reason: An error occurred which prevented the opening of a named pipe connection to the FDR/UPSTREAM Windows Agent service on the following computer.
Action: Contact FDR/UPSTREAM Tech Support.
PC11005E (WinSS) Can't get drive characters
Reason: An error occurred which prevented the allocation of a local drive character for internal use. This will continue to be a problem for WinSS backups and restores until the system on which the FDR/UPSTREAM client is running is rebooted.
Action: Reboot the Windows system. Contact FDR/UPSTREAM Tech Support.
PC11006E (WinSS) Can't start a component file spec search
Reason: An error occurred while attempting to start a file search of a component file spec. The name of the component and the file spec follow.
Action: Contact FDR/UPSTREAM Tech Support.
PC11007E (WinSS) Invalid component name
Reason: While attempting to create the file names array for a component, the component information for the component could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC11008E (WinSS) Can't allocate a component file names array
Reason: While attempting to allocate memory for a component file names array, there was insufficient memory.
Action: Close applications or free memory.
PC11009E (WinSS) Can't end the backup
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that the backup ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11010E (WinSS) Can't end the restore
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that the restore ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11011E (WinSS) Can't start backup or restore end thread
Reason: An error occurred while attempting to start a thread used for ending the backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11012E (WinSS) Can't end the inquiry
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that the inquiry ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11013E (WinSS) Can't free drive characters
Reason: An error occurred which prevented the deallocation of a local drive character for internal use.
Action: Contact FDR/UPSTREAM Tech Support.
PC11014E (WinSS) Invalid VSS information type
Reason: An internal error occurred due to receiving an unknown VSS information record type.
Action: Contact FDR/UPSTREAM Tech Support.
PC11015E (WinSS) Can't allocate component display name mappings
Reason: While attempting to allocate memory for the component display name mapping information, there was insufficient memory.
Action: Close applications or free memory.
PC11016E (WinSS) Can't allocate volume information
Reason: While attempting to allocate memory for the volume information, there was insufficient memory.
Action: Close applications or free memory.
PC11017E (WinSS) Can't allocate mount point information
Reason: While attempting to allocate memory for the mount point information, there was insufficient memory.
Action: Close applications or free memory.
PC11018E (WinSS) Can't allocate writer information
Reason: While attempting to allocate memory for the writer information, there was insufficient memory.
Action: Close applications or free memory.
PC11019E (WinSS) Can't allocate component information
Reason: While attempting to allocate memory for the component information, there was insufficient memory.
Action: Close applications or free memory.
PC11020E (WinSS) Can't allocate dependency information
Reason: While attempting to allocate memory for the dependency information, there was insufficient memory.
Action: Close applications or free memory.
PC11021E (WinSS) Can't allocate file spec information
Reason: While attempting to allocate memory for the file spec information, there was insufficient memory.
Action: Close applications or free memory.
PC11022E (WinSS) Can't allocate backup volume information
Reason: While attempting to allocate memory for the backup volume information, there was insufficient memory.
Action: Close applications or free memory.
PC11023E (WinSS) Can't allocate backup mount point information
Reason: While attempting to allocate memory for the backup mount point information, there was insufficient memory.
Action: Close applications or free memory.
PC11024E (WinSS) Can't allocate expanded user spec information
Reason: While attempting to allocate memory for the expanded user spec information, there was insufficient memory.
Action: Close applications or free memory.
PC11025E (WinSS) Can't open snapshot set IDs file
Reason: An error occurred while attempting to open the saved snapshot set IDs file from a previous restartable backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11026E (WinSS) Can't get snapshot set IDs file size
Reason: An error occurred while attempting to get the size of a saved snapshot set IDs file from a previous restartable backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11027E (WinSS) Can't allocate snapshot set IDs data
Reason: While attempting to allocate memory for the snapshot IDs file data, there was insufficient memory.
Action: Close applications or free memory.
PC11028E (WinSS) Can't read snapshot set IDs file
Reason: An error occurred while attempting to read the saved snapshot set IDs file from a previous restartable backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11029E (WinSS) Invalid snapshot set IDs file data
Reason: The data read from a snapshot set IDs file is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC11030E (WinSS) Snapshot set ID was not found
Reason: A snapshot set ID for the specified computer was not found in the snapshot set IDs file. The volume snapshot set associated with the snapshot set ID in the snapshot set IDs file could not be found. The system may have deleted it.
Action: Contact FDR/UPSTREAM Tech Support.
PC11031E (WinSS) Can't create snapshot set IDs file
Reason: An error occurred while attempting to create a snapshot set IDs file for a restartable backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11032E (WinSS) Can't write snapshot set IDs file
Reason: An error occurred while attempting to write data to a snapshot set IDs file for a restartable backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11033E (WinSS) Can't send CheckVersion request to USW2KAgt
Reason: An error occurred while sending a CheckVersion request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11034E (WinSS) Can't save parameters
Reason: An error occurred while attempting to save the current set of parameters before starting a restore to retrieve the WinSS control files from a previous backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11035E (WinSS) Can't create WinSS restore file spec
Reason: An error occurred while attempting to create a new file spec to restore the WinSS control files from a previous backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11036E (WinSS) Can't restore WinSS control files
Reason: An error occurred while restoring one or more of the WinSS control files from a previous backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11037E (WinSS) Can't restore parameters
Reason: An error occurred while attempting to restore the current set of parameters after completing a restore to retrieve the WinSS control files from a previous backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11038E (WinSS) Can't send Start request to USW2KAgt
Reason: An error occurred while sending a RestartVSSBackup, StartVSSBackup, ComponentVSSRestore or VolumeVSSRestore request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11039E (WinSS) Can't send user specification to USW2KAgt
Reason: An error occurred while sending a user specification to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11040E (WinSS) Can't send GetVSSInfo request to USW2KAgt
Reason: An error occurred while sending a GetVSSInfo request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11041E (WinSS) Can't allocate user spec information
Reason: While attempting to allocate memory for the user spec information, there was insufficient memory.
Action: Close applications or free memory.
PC11042E (WinSS) Can't start get VSS information thread
Reason: An error occurred while attempting to start a thread used for getting VSS information for an inquiry.
Action: Contact FDR/UPSTREAM Tech Support.
PC11043E (WinSS) PLUGINPARAMETERS are invalid
Reason: One or more of the optional PLUGINPARAMETERS subparameters are invalid. The PLUGINPARAMETERS parameter follows.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11044E (WinSS) Can't execute a command
Reason: An error occurred while executing a PREBACKUPCOMMAND, POSTBACKUPCOMMAND, PRERESTORECOMMAND or POSTRESTORECOMMAND.
Action: See additional messages.
PC11045E (WinSS) Can't set a parameter
Reason: An internal error occurred while attempting to set the value of a non-repeating parameter.
Action: Contact FDR/UPSTREAM Tech Support.
PC11046E (WinSS) Multiple full-system file specs are invalid
Reason: Your specification contains more than one full-system file specs. This is invalid.
Action: Change your backup or restore file specifications.
PC11047E (WinSS) More than one PREBACKUPCOMMAND subparameter
Reason: Your file specifications contain one or more PLUGINPARAMETERS parameters that contain more than one PREBACKUPCOMMAND subparameter. This is invalid.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11048E (WinSS) More than one POSTBACKUPCOMMAND subparameter
Reason: Your file specifications contain one or more PLUGINPARAMETERS parameters that contain more than one POSTBACKUPCOMMAND subparameter. This is invalid.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11049E (WinSS) More than one PRERESTORECOMMAND subparameter
Reason: Your file specifications contain one or more PLUGINPARAMETERS parameters that contain more than one PRERESTORECOMMAND subparameter. This is invalid.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11050E (WinSS) More than one POSTRESTORECOMMAND subparameter
Reason: Your file specifications contain one or more PLUGINPARAMETERS parameters that contain more than one POSTRESTORECOMMAND subparameter. This is invalid.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11051E (WinSS) Invalid file spec
Reason: A file spec was found with a blank FILES parameter or a DESTINATION parameter for an exclude file spec.
Action: Change your backup or restore file specifications.
PC11052E (WinSS) Invalid full-system exclude file spec
Reason: A full-system exclude file spec was found. This is invalid.
Action: Change your backup or restore file specifications.
PC11053E (WinSS) Invalid full-system destination
Reason: A restore file spec was found with a non-full-system FILES parameter and a full-system DESTINATION parameter. This is invalid.
Action: Change your restore file specifications.
PC11054E (WinSS) Invalid non-full-system destination
Reason: A restore file spec was found with a full-system FILES parameter and a non-full-system DESTINATION parameter. This is invalid.
Action: Change your restore file specifications.
PC11055E (WinSS) Destination type is invalid
Reason: A restore file spec was found with a FILES parameter for a volume file spec and a DESTINATION parameter for a component file spec or a FILES parameter for a component file speca and a DESTINATION parameter for a volume file spec or FILES and DESTINATION parameters for different component file specs.
Action: Change your backup or restore file specifications.
PC11056E (WinSS) Full-system subparameter invalid
Reason: A full-system file spec was found with a PLUGINPARAMETERS parameter that contains an OPTIONS, CJFILENAME or CJENTRYDAYS subparameter. This is invalid.
Action: Supply a valid PLUGINPARAMETERS parameter.
PC11057E (WinSS) More than one original computer name
Reason: Your set of restore file specs contains two or more FILES parameters that specify multiple original computer names. This is invalid.
Action: Change your restore file specifications.
PC11058E (WinSS) Mixed PlugIn restores are invalid
Reason: Your set of restore file specs contains two or more PLUGIN parameters with multiple PlugIn names. This is invalid.
Action: Change your restore file specifications.
PC11059E (WinSS) Can't start backup or restore thread
Reason: An error occurred while attempting to start a thread used for starting the backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11060I (WinSS) VSS snapshot set ID
Reason: A VSS snapshot set was created. The ID and time stamp for the snapshot set follows.
PC11061D (WinSS) Previous backup XML file not found
Reason: A backup was started, but the translation tables and UPSTREAM assigned drive characters used for this backup could not be verified against the ones used for a previous backup because the XML file from the previous backup could not be found. All files will be transmitted.
Action: If this is the first backup for this profile, this message can be ignored. By the end of this backup a new WinSS.xml file will have been created so that it will be available for the next backup for this profile and this message should not be logged again.
PC11062I (WinSS) Volume drive letter/character assignment
PC11063E (WinSS) Can't recreate a backup file spec
Reason: An error occurred while attempting to recreate one or more backup file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC11064E (WinSS) Nothing included for backup
Reason: The end result of resolving all of your WinSS file specs is that nothing was included in the backup.
Action: Change your backup file specifications.
PC11065E (WinSS) Nothing included for restore
Reason: The end result of resolving all of your WinSS file specs is that nothing was included in the restore.
Action: Change your restore file specifications.
PC11066E (WinSS) Can't restore parameters
Reason: An error occurred while attempting to restore the current set of parameters after determining that no volume file specs were specified for a restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11067E (WinSS) A component cannot be restored
Reason: Your restore file specs include a component which cannot be restored. The component name and the reason it cannot be restored follow.
Action: Ensure that the service that owns this component has been stopped. Contact FDR/UPSTREAM Tech Support.
PC11068E (WinSS) Can't recreate a restore file spec
Reason: An error occurred while attempting to recreate one or more restore file specs.
Action: Contact FDR/UPSTREAM Tech Support.
PC11069E (WinSS) Can't open a USW2KAgt named pipe connection
Reason: An error occurred which prevented the opening of a named pipe connection to the FDR/UPSTREAM Windows Agent service on the following computer in order to delete a snapshot set.
Action: Contact FDR/UPSTREAM Tech Support. You may need to use the Snapshot.exe program to delete the snapshot set manually.
PC11070E (WinSS) Can't send DeleteSnapshotSet request to USW2KAgt
Reason: An error occurred while sending a DeleteSnapshotSet request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support. You may need to use the Snapshot.exe program to delete the snapshot set manually.
PC11071E (WinSS) Invalid snapshot set IDs file data
Reason: A snapshot set ID read from a snapshot set IDs file is invalid.
Action: Contact FDR/UPSTREAM Tech Support.
PC11072E (WinSS) Can't save parameters
Reason: An error occurred while attempting to save the current set of parameters before starting a backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11073E (WinSS) Can't send RecreateWinSSFiles request to USW2KAgt
Reason: An error occurred while sending a RecreateWinSSFiles request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11074E (WinSS) Can't send SetComponentSucceeded request to USW2KAgt
Reason: An error occurred while sending a SetComponentSucceeded request record to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11075D (WinSS) Reboot the computer
Reason: The UPSTREAM restore has finished successfully. To complete the rest of the entire restoration process, the computer must be rebooted.
PC11076E (WinSS) Can't create an exclude file spec
Reason: An error occurred while creating an exclude file spec for one of the writers or components.
Action: Contact FDR/UPSTREAM Tech Support.
PC11077E (WinSS) Backup of the WinSS.xml file failed.
Reason: The backup of the WinSS.xml file failed. The backup cannot be committed.
Action: Contact FDR/UPSTREAM Tech Support.
PC11078E (WinSS) Can't send RenameFileAtReboot request to USW2KAgt
Reason: An error occurred while sending a RenameFileAtReboot request record to the FDR/UPSTREAM Windows Agent service to delete a temporary restore file.
Action: Contact FDR/UPSTREAM Tech Support.
PC11079E (WinSS) Can't send RenameFileAtReboot request to USW2KAgt
Reason: An error occurred while sending a RenameFileAtReboot request record to the FDR/UPSTREAM Windows Agent service to rename a restored file.
Action: Contact FDR/UPSTREAM Tech Support.
PC11080W (WinSS) A component has no files
Reason: No files were found for any of the file specs for a VSS component. The name of the VSS component that has no files follows. This is potentially, but not necessarily, a serious problem.
Action: Contact FDR/UPSTREAM Tech Support for help in determining the severity of this situation.
PC11081E (WinSS) Invalid open file mode
Reason: An internal error occurred while attempting to open a file with an invalid open mode.
Action: Contact FDR/UPSTREAM Tech Support.
PC11082E (WinSS) Can't find the component for a file
Reason: And error occurred while attempting to identify the component that owns a component file being opened.
Action: Contact FDR/UPSTREAM Tech Support.
PC11083E (WinSS) Can't find the volume for a file
Reason: And error occurred while attempting to identify the volume that contains a normal file spec file being opened.
Action: Contact FDR/UPSTREAM Tech Support.
PC11084E (WinSS) Can't get file information
Reason: An error occurred while attempting to get the file information for a file that was just opened.
Action: Contact FDR/UPSTREAM Tech Support.
PC11085E (WinSS) Can't search for original file
Reason: An error occurred while searching for a file on a real (non-snapshot) volume. The error was something other than a file not found or path not found error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11086E (WinSS) Can't set attributes for original file
Reason: An error occurred while attempting to set the file attributes on a real (non-snapshot) volume.
Action: Contact FDR/UPSTREAM Tech Support.
PC11087E (WinSS) A backup profile name was not specified
Reason: The backup profile name is blank.
Action: Specify a backup profile name.
PC11088E (WinSS) The backup (merge) type is invalid
Reason: The backup type must be either First-time full, Full merge or Incremental merge.
Action: Change the backup type.
PC11089E (WinSS) Can't modify the INQOPTIONS parameter
Reason: An error occurred with attempting to modify the INQOPTIONS parameters.
Action: Contact FDR/UPSTREAM Tech Support.
PC11090E (WinSS) Invalid PATHNAME parameter
Reason: The set of file specifications saved in the parameter file for a restartable backup contains one or more invalid PATHNAME parameters. Following is the first file specification with an invalid PATHNAME parameter.
Action: Contact FDR/UPSTREAM Tech Support.
PC11091E (WinSS) Can't allocate a last file information entry
Reason: While attempting to allocate memory for a last file information entry, there was insufficient memory.
Action: Close applications or free memory.
PC11092W (WinSS) Can't allocate changed file information
Reason: While attempting to allocate memory for the changed file information, there was insufficient memory. This condition will create a backup similiar to a First-Time Full Merge backup, even though it is a Full Merge or Merge Incremental backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC11093D (WinSS) Hard links are not supported
Reason: A file was encountered during the backup which has multiple hard links. The WinSS PlugIn does not maintain the linkage between the multiple links when one or more of them are restored.
Action: Contact FDR/UPSTREAM Tech Support.
PC11094E (WinSS) Can't determine virtual server status
Reason: An error occurred while attempting to determine if the following computer name is a virtual server of a cluster or not.
Action: Contact FDR/UPSTREAM Tech Support.
PC11095E (WinSS) Can't copy the WinSS.xml file
Reason: An error occurred while copying the WinSS.xml file to the UPSTREAM work path.
Action: Contact FDR/UPSTREAM Tech Support.
PC11096D (WinSS) Files will be renamed during restore
Reason: The RESTOREFILEFAIL parameter has been changed to 2 (Restore the file to a generated name). Any non-component files that cannot be restored to their original file name will be restored to a temporary file name which is the original file name with a suffix (., example ".PROFILE040701123456") appended to it. If the original file name can be renamed, it will be renamed to the original file name with the ".TEMP" suffix appended to it and the temporary file name will be renamed to the original file name. If the original file name cannot be renamed, the temporary file name will be left as is.
Action: Examine the restored directories to determine what files you may need to delete or rename manually after the restore is finished.
PC11097E (WinSS) Can't get list of Windows 2003 computers
Reason: An error occurred while attempting to get a list of the Windows 2003 computers in the current domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC11098E (WinSS) Invalid Director request type received
Reason: A PlugIn Request Type was received from the Director which is invalid. The invalid PlugIn Request Type follows.
Action: Contact FDR/UPSTREAM Tech Support.
PC11099E (WinSS) Can't send SetVolumeMountPoint request to USW2KAgt
Reason: An error occurred while sending a SetVolumeMountPoint request record to the FDR/UPSTREAM Windows Agent service to rename a restored file.
Action: Contact FDR/UPSTREAM Tech Support.
HVCluster PlugIn Errors
PC11300E (HVCluster) Can't find the volume for a file name
Reason: An error occurred which prevented finding the volume information for the following file name.
Action: Contact FDR/UPSTREAM Tech Support.
PC11301E (HVCluster) Can't open a USW2KAgt named pipe connection
Reason: An error occurred which prevented the opening of a named pipe connection to the FDR/UPSTREAM Windows Agent service on the following computer.
Action: Contact FDR/UPSTREAM Tech Support.
PC11302E (HVCluster) Can't free drive characters
Reason: An error occurred which prevented the deallocation of a local drive character for internal use.
Action: Contact FDR/UPSTREAM Tech Support.
PC11303E (HVCluster) Can't get drive characters
Reason: An error occurred which prevented the allocation of a local drive character for internal use. This will continue to be a problem for WinSS backups and restores until the system on which the FDR/UPSTREAM client is running is rebooted.
Action: Reboot the Windows system. Contact FDR/UPSTREAM Tech Support.
PC11304E (HVCluster) Can't search file spec
Reason: An error occurred while attempting to start a file search of a component file spec. The name of the component and the file spec follow.
Action: Contact FDR/UPSTREAM Tech Support.
PC11305E (HVCluster) Can't allocate component file names array
Reason: While attempting to allocate memory for a component file names array, there was insufficient memory.
Action: Close applications or free memory.
PC11306E (HVCluster) Can't delete drive mapping
Reason: An error occurred while attempting to delete a symbolic DOS Device drive mapping.
Action: Contact FDR/UPSTREAM Tech Support.
PC11307E (HVCluster) Can't open cluster
Reason: An error occurred while attempting to open a cluster.
Action: Contact FDR/UPSTREAM Tech Support.
PC11308E (HVCluster) Can't start cluster resource enumeration
Reason: An error occurred while attempting to start an enumeration of the cluster resources.
Action: Contact FDR/UPSTREAM Tech Support.
PC11309E (HVCluster) Can't enumerate cluster resources
Reason: An error occurred while attempting to enumerate a cluster resource.
Action: Contact FDR/UPSTREAM Tech Support.
PC11310E (HVCluster) Can't open cluster resource
Reason: An error occurred while attempting to open a cluster resource.
Action: Contact FDR/UPSTREAM Tech Support.
PC11311E (HVCluster) Can't allocate a VM entry
Reason: While attempting to allocate memory for VM entry, there was insufficient memory.
Action: Close applications or free memory.
PC11312E (HVCluster) Can't start cluster node enumeration
Reason: An error occurred while attempting to start an enumeration of the cluster nodes.
Action: Contact FDR/UPSTREAM Tech Support.
PC11313E (HVCluster) Can't enumerate cluster nodes
Reason: An error occurred while attempting to enumerate a cluster node.
Action: Contact FDR/UPSTREAM Tech Support.
PC11314E (HVCluster) Can't open cluster node
Reason: An error occurred while attempting to open a cluster node.
Action: Contact FDR/UPSTREAM Tech Support.
PC11315E (HVCluster) Can't allocate a node entry
Reason: While attempting to allocate memory for Node entry, there was insufficient memory.
Action: Close applications or free memory.
PC11316E (HVCluster) Can't get clusters
Reason: An error occurred while attempting to get the list of clusters for the current domain.
Action: Contact FDR/UPSTREAM Tech Support.
PC11317E (HVCluster) Can't allocate a cluster entry
Reason: While attempting to allocate memory for Cluster entry, there was insufficient memory.
Action: Close applications or free memory.
PC11318E (HVCluster) Can't inquire versions
Reason: An error occurred while attempting to get a list of the backup versions for a backup profile.
Action: Contact FDR/UPSTREAM Tech Support.
PC11320E (HVCluster) Can't read backup version
Reason: An error occurred while attempting to get the information for a backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC11321E (HVCluster) Can't find specified backup version
Reason: The specified backup version to be used for a restore could not be found.
Action: Contact FDR/UPSTREAM Tech Support.
PC11322E (HVCluster) Can't inquire file specs
Reason: An error occurred while attempting to get a list of the file specs for a backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC11323E (HVCluster) Can't find cluster file spec
Reason: The specified original cluster name could not be found in the specified backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC11324E (HVCluster) Can't inquire backup file spec
Reason: An error occurred while attempting to get the information for a file spec of a backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC11325E (HVCluster) Can't get directory info
Reason: An error occurred while attempting to get the information for a directory from a backup version.
Action: Contact FDR/UPSTREAM Tech Support.
PC11326E (HVCluster) Can't end backup
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that a backup has ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11327E (HVCluster) Can't end restore
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that a restore has ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11328E (HVCluster) Invalid VSS information type
Reason: An internal error occurred due to receiving an unknown VSS information record type.
Action: Contact FDR/UPSTREAM Tech Support.
PC11329E (HVCluster) Can't allocate component additional info
Reason: While attempting to allocate memory for additional component information, there was insufficient memory.
Action: Close applications or free memory.
PC11330E (HVCluster) Can't allocate component display name mappings
Reason: While attempting to allocate memory for the component display name mapping information, there was insufficient memory.
Action: Close applications or free memory.
PC11331E (HVCluster) Can't allocate volume info
Reason: While attempting to allocate memory for the volume information, there was insufficient memory.
Action: Close applications or free memory.
PC11332E (HVCluster) Can't allocate mount point info
Reason: While attempting to allocate memory for the mount point information, there was insufficient memory.
Action: Close applications or free memory.
PC11333E (HVCluster) Can't allocate writer info
Reason: While attempting to allocate memory for the writer information, there was insufficient memory.
Action: Close applications or free memory.
PC11334E (HVCluster) Can't allocate component info
Reason: While attempting to allocate memory for the component information, there was insufficient memory.
Action: Close applications or free memory.
PC11335E (HVCluster) Can't allocate dependency info
Reason: While attempting to allocate memory for the dependency information, there was insufficient memory.
Action: Close applications or free memory.
PC11336E (HVCluster) Can't allocate file spec info
Reason: While attempting to allocate memory for the file spec information, there was insufficient memory.
Action: Close applications or free memory.
PC11337E (HVCluster) Can't allocate backup volume info
Reason: While attempting to allocate memory for the backup volume information, there was insufficient memory.
Action: Close applications or free memory.
PC11338E (HVCluster) Can't allocate backup mount point info
Reason: While attempting to allocate memory for the backup mount point information, there was insufficient memory.
Action: Close applications or free memory.
PC11339E (HVCluster) Can't allocate expanded user spec info
Reason: While attempting to allocate memory for the expanded user spec information, there was insufficient memory.
Action: Close applications or free memory.
PC11340E (HVCluster) Different EToA table or table name
Reason: The current backup or restore specifies one EBCDIC to ASCII table or table name, but the previous backup specified another. The EBCDIC to ASCII table or table name from the previous backup will be used.
Action: Contact FDR/UPSTREAM Tech Support.
PC11341E (HVCluster) Can't modify the EToA table name
Reason: An error occurred while attempting to dynamically modify the EBCTOASC non-repeating parameter.
Action: Contact FDR/UPSTREAM Tech Support.
PC11342E (HVCluster) Different ASCToEBC table name
Reason: The current backup or restore specifies one ASCII to EBCDIC table or table name, but the previous backup specified another. The ASCII to EBCDIC table or table name from the previous backup will be used.
Action: Contact FDR/UPSTREAM Tech Support.
PC11343E (HVCluster) Can't modify the AtoE table name
Reason: An error occurred while attempting to dynamically modify the ASCTOEBC non-repeating parameter.
Action: Contact FDR/UPSTREAM Tech Support.
PC11344E (HVCluster) Can't define drive mapping
Reason: An error occurred while attempting to define a symbolic DOS Device drive mapping. This will continue to be a problem for HVCluster backups and restores until the system on which the FDR/UPSTREAM client is running is rebooted.
Action: Contact FDR/UPSTREAM Tech Support.
PC11345E (HVCluster) Can't start backup
Reason: An error occurred while sending a StartVSSBackup request to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11346E (HVCluster) Can't send user spec info
Reason: An error occurred while sending a user specification to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11347E (HVCluster) Can't recreate WinSS.xml file
Reason: An error occurred while sending a RecreateWinSSFiles request to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11348E (HVCluster) Can't set component succeeded
Reason: An error occurred while sending a SetComponentSucceeded request to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11349E (HVCluster) Can't set parameter
Reason: An error occurred while attempting to dynamically modify one or more of the non-repeating parameters for a backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11350E (HVCluster) Invalid file spec
Reason: An invalid file spec was specified.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11351E (HVCluster) Invalid full cluster SPECTYPE
Reason: A full cluster was specified in a non-include file specification. A full cluster (FILES \\) may only be included.
Action: Review the values for your FILES and SPECTYPE parameters. Contact FDR/UPSTREAM Tech Support.
PC11352E (HVCluster) Invalid cluster name
Reason: An include file spec specified the name of a cluster which does not exist.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11353E (HVCluster) Can't check version
Reason: An error occurred while sending a CheckVersion request to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11354E (HVCluster) Can't create profile directory
Reason: An error occurred while attempting to create a profile directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC11355E (HVCluster) Can't copy WinSS.xml file
Reason: An error occurred while attempting to copy a WinSS.xml file from the control file directory to a profile directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC11356E (HVCluster) Can't start restore
Reason: An error occurred while sending a ComponentVSSRestore request to the FDR/UPSTREAM Windows Agent service.
Action: Contact FDR/UPSTREAM Tech Support.
PC11357E (HVCluster) Can't restore files
Reason: An error occurred while attempting to restore the files for a Hyper-V VM component.
Action: See previous messages. Contact FDR/UPSTREAM Tech Support.
PC11358E (HVCluster) Can't create control files directory
Reason: An error occurred while attempting to create the control files directory needed to restore one or more WinSS.xml control files.
Action: Contact FDR/UPSTREAM Tech Support.
PC11359E (HVCluster) Can't restore WinSS.xml files
Reason: An error occurred while attempting to restore one or more WinSS.xml control files to the control files directory.
Action: Contact FDR/UPSTREAM Tech Support.
PC11360E (HVCluster) Missing backup profile name
Reason: A backup profile name was not specified.
Action: Review the value for your BACKUPPROFILE parameter. Contact FDR/UPSTREAM Tech Support.
PC11361E (HVCluster) Invalid merge type
Reason: An invalid MERGE parameter was specified. The MERGE parameter must have a value of 1 (Full Merge), 2 (Incremental Merge) or 3 (First-time Full Merge).
Action: Review the value for your MERGE parameter. Contact FDR/UPSTREAM Tech Support.
PC11362E (HVCluster) Invalid backup
Reason: The backup version specified for the restore contains backup information for zero or more than one cluster. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11363E (HVCluster) Invalid cluster file spec
Reason: The parameters for a backup or restore specify more than one cluster. Only one cluster may be backed up or restored at one time.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11364E (HVCluster) File spec suffix mismatch
Reason: The file spec suffixes for a set of FILES and DESTINATION parameter do not match. A Hyper-V VM may only be restored back to the same VM name.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11365E (HVCluster) Destination cluster has no nodes
Reason: The cluster specified as the destination of a restore has no nodes. Instead of specifying a cluster name for the DESTINATION parameter, specify a specific computer name.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11366E (HVCluster) Invalid PLUGINPARAMETERS
Reason: The specified value for the PLUGINPARAMETERS parameter is invalid.
Action: Review the value for your PLUGINPARAMETERS parameter. Contact FDR/UPSTREAM Tech Support.
PC11367E (HVCluster) Invalid full cluster file spec options
Reason: A PLUGINPARAMETERS parameter value is not supported for a restore of an entire cluster. Specify individual VM file specs with the appropriate PLUGINPARAMETERS parameter.
Action: Review the values for your FILES, DESTINATION and PLUGINPARAMETERS parameters. Contact FDR/UPSTREAM Tech Support.
PC11368E (HVCluster) Invalid VM file spec
Reason: A file spec for an individual VM is invalid.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11369E (HVCluster) No VMs selected
Reason: Your set of file specifications resulted in none of the VMs for the specified cluster being selected for backup or restore.
Action: Review the values for your FILES and DESTINATION parameters. Contact FDR/UPSTREAM Tech Support.
PC11370E (HVCluster) Can't allocate selected VMs
Reason: While attempting to allocate memory for a selected VM array, there was insufficient memory.
Action: Close applications or free memory.
PC11371E (HVCluster) No VMs are snapshot ready
Reason: While attempting to create a snapshot set for a set of VMs, no VMs were found that are ready to be snapshotted. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11372E (HVCluster) One or more VMs not backed up
Reason: At the end of the backup one or more VMs were found that were specified to be backed up and were not. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11373I (HVCluster) VMs are snapshot ready
Reason: The following list of VMs are ready to be snapshotted. An attempt to create a snapshot set for these VMs will be performed on the following cluster node name.
PC11374I (HVCluster) VMs are backup ready
Reason: The following list of VMs have been snapshotted and are ready to be backed up.
PC11375I (HVCluster) VMs are not backup ready
Reason: After attempting to create a snapshot set of a cluster node there were no VMs found on the cluster node to be backed up. This is not an error.
PC11376E (HVCluster) Backup failed
Reason: A severe error occurred which prevents the backup from continuing. The backup has failed.
Action: Contact FDR/UPSTREAM Tech Support.
PC11377E (HVCluster) Restarted backup not supported
Reason: A backup using the HVCluster PlugIn cannot be restarted.
Action: Contact FDR/UPSTREAM Tech Support.
PC11378E (HVCluster) Can't save parameters
Reason: An error occurred while attempting to save the current set of parameters before starting a backup or restore.
Action: Contact FDR/UPSTREAM Tech Support.
PC11379E (HVCluster) Can't restore parameters
Reason: An error occurred while attempting to restore a previous set of parameters after ending a backup or restore. The backup or restore may or may not have been successful.
Action: Contact FDR/UPSTREAM Tech Support.
PC11380E (HVCluster) Restarted restore not supported
Reason: A restore using the HVCluster PlugIn cannot be restarted.
Action: Contact FDR/UPSTREAM Tech Support.
PC11381E (HVCluster) Invalid VM process state
Reason: While processing the list of selected VMs for backup or restore, one or more of the VMs were found to have an invalid processing state. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11382E (HVCluster) Invalid file open mode
Reason: While attempting to open a file for backup, the file open request was found to be invalid. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11383E (HVCluster) Can't find component for file
Reason: While attempting to open a file for backup, the component to which the file belongs could not be found. This is an internal error.
Action: Contact FDR/UPSTREAM Tech Support.
PC11384E (HVCluster) Can't allocate LastFile info
Reason: While attempting to allocate memory for a LastFile structure, there was insufficient memory.
Action: Close applications or free memory.
PC11385E (HVCluster) Invalid PlugIn combination
Reason: A backup file specification uses a PlugIn which is not HVCluster. The use of the HVCluster PlugIn for a backup requires that no other PlugIn can be specified.
Action: Review the values for your PLUGIN parameters. Contact FDR/UPSTREAM Tech Support.
PC11386E (HVCluster) Can't end the inquiry
Reason: An error occurred while attempting to inform the FDR/UPSTREAM Windows Agent service that the inquiry ended.
Action: Contact FDR/UPSTREAM Tech Support.
PC11387E (HVCluster) Can't allocate a file spec array
Reason: While attempting to allocate memory for a file spec entry, there was insufficient memory.
Action: Close applications or free memory.
PC11388E (HVCluster) Invalid Director request type received
Reason: A PlugIn Request Type was received from the Director which is invalid. The invalid PlugIn Request Type follows.
Action: Contact FDR/UPSTREAM Tech Support.
UPSTREAM Client Encryption Errors
PC11401E Error opening encryption file
Action: See description above.
PC11402E Error reading encryption file
Action: See description above.
PC11403E Unexpected EOF reading encryption file
Action: Restore encryption file from backup.
PC11404I Using specified encryption path: %s
PC11405E Damaged encryption file: %s
Action: For restore purposes it should be recovered or restored.
PC11406E Error opening encryption file for write
Action: See description above.
PC11407E Error writing encryption file
Action: See description above.
PC11408E Encryption without compression disallowed
Reason: Since encryption makes tape or other compression ineffective, this is the only chance to compress. Thus we require at least fast compression.
PC11409E Error writing warning file
PC11410E Nearing limit of 16 keys per profile
Reason: Because we keep all keys so that old backups can be restored, we have a limit of 16 keys per profile. You have now reached 10 keys. This backup will fail; if you resubmit it it will work and create the 10th key and you will not see a warning again until you reach the limit.
PC11411E Reached limit of 16 keys per profile
Reason: You can no longer create any new keys.
PC11412E Prior encryption file number should be %u, but is %u
Reason: This is a fatal error.
Action: Call tech support for help in figuring out the problems with your key files.
NDMP Errors
PC11501E Error opening NDMP file for write.
PC11502E Error writing NDMP file.
PC11503I Error setting hidden attribute for NDMP file %u
PC11504D Error deleting NDMP file.
PC11505E Error opening NDMP file for read.
PC11506E Error reading NDMP profile file.
PC11507E Corrupted NDMP profile file: %s
Reason: This file will be deleted.
PC11508E Invalid NDMP plugin parameter %s %s
PC11509E Restart not supported with NDMP
PC11510E Invalid action with NDMP plugin: %u
PC11511E Error pushing parameters
Reason: Usually insufficient memory.
PC11512E Insufficient memory allocating communications handle
Action: Free memory or close applications.
PC11513E TCP/IP not available
Action: Validate that TCP/IP services are active on your system
PC11514E TCP/IP address specified invalid: %s
PC11515E Error in connect to NDMP Server
PC11516E Unexpected close connection during receive of 0x%x
PC11517E Error receiving connection response from server
PC11518E Size exceeded maximum buffer size.
PC11519E Remote NDMP error: %s performing: %s (expected: %s)
PC11520E Error during NDMP Connect Open
PC11521E Error during NDMP Get Server Info
PC11522E String too long in NDMP structure.
PC11523E Insufficient size to receive NDMP header.
PC11524E NDMP error message: %s
PC11525W NDMP warning message: %s
PC11526D NDMP message: %s
PC11527D Server log file: %s
PC11528I NDMP vendor: %s, Product: %s, Revision: %s
PC11529E Error getting authentication attributes
PC11530E Error authorizing client
PC11531E Error getting file system list
PC11532E No devices found on NDMP server
PC11533E Search of %s with %s pending
Reason: Internal error.
PC11534E Search invalid except during backup and restore.
PC11535E Requested next search entry, but no pending search.
PC11536E Invalid context for new directory search %s
PC11537E Error getting backup type information
PC11538E Missing file attribute in type: %s (0x%x)
PC11539E BUTYPE unknown (didn't find dump or tar)
PC11540E Error binding for listen
PC11541E Error listening for data
PC11542E Error get local address for data
PC11543E Error in establishing the data connection
PC11544E Error in accepting the data connection
PC11545E Error in starting the backup
PC11546E Error in TCP/IP select (to detect data pending)
PC11547E Error while receiving control information
PC11548E Error while receiving raw data
PC11549E Control socket closed without sending history
PC11550E Directory search with raw buffer pending.
PC11551E Timed out receiving data and directories.
PC11552E Insufficient memory allocating FS Tree
PC11553E Insufficient memory allocating FS Tree Node
PC11554E Can't find NDMP file system spec for user spec: %s
Action: Specify a spec on this server
PC11555E Error processing a directory entry
PC11556E The UNIX file name was missing for this dir entry
PC11557E Insufficient memory creating directory tree
PC11558E Parent node directory #%s not found
PC11559E Parent file node #%s for directory %s not found
PC11560E Insufficient memory creating parent tree for %s
PC11561E Insufficient memory adding directory %s
PC11562E Insufficient memory adding node #%s to directory %s
PC11563E Missing parent node #%s for node #%s (%s)
PC11564E Error adding node #%s (%s) to parent #%s (%s)
PC11565E While processing dir, exceeded buffer (%s)
PC11566E Error adding node #%s (%s) to parent dir #%s (%s)
PC11567E While processing node, exceeded buffer (%s)
PC11568E While processing node, node dir not found (%s)
PC11569E While processing node, node data not found (%s)
PC11570E Expected search for %s, but got %s
PC11571E Directory node not found for %s
PC11572E File node not found for %s
PC11573E File not found setting attributes for %s
PC11574E File sent to NDMP PlugIn, but not an NDMP File (%s)
PC11575E File open mode of 0x%x incorrect for %s
PC11576E Only one NDMP file open at a time (%s)
PC11577E Regular file not found in open: %s
PC11578E Insufficient memory allocating seach for NDMP Profile
PC11579E OS search error searching for profiles #%u
PC11580E Error in socket TCP/IP call.
PC11581E Invalid to mix NDMP and other or non-PlugIn specs
PC11582E Bad NDMP CommHandle: %s during %s
PC11583E User spec not found on server: %s
PC11584E Only one file spec is supported for restore.
PC11585E Error opening NDMP date file for write
PC11586E Error writing NDMP date file
PC11587E Error opening NDMP date file for read
PC11588E Error reading NDMP date file
PC11589D Invalid format of line in NDMP date file (%s)
PC11590E Missing NDMP date file
PC11591E Error deleting NDMP date file
PC11592E NDMP required file info size too small (%u): %s
PC11593E Insufficient memory allocating FH_DIR tree
PC11594E Insufficient memory adding to FH_DIR tree (%s,%s)
PC11595E Insufficient memory allocating FH_NODE tree
PC11596E Insufficient memory adding to FH_NODE tree (%s)
PC11597E Expected root node %s for %s
PC11598E Expected initial FH_DIR data
PC11599E Parent %s not found for node %s
NDMP Errors continue at 12900
UNIX Snapshot Errors
PC11600E (UNIXSnap) Unexpected operation: %s
PC11601E (UNIXSnap) Insufficient memory during %s
PC11602E (UNIXSnap) Error getting device ID for device above.
PC11603E (UNIXSnap) Expected FS #%s for %s
PC11604E (UNIXSnap) No file system for path: %s
PC11605E (UNIXSnap) Insufficient memory during %s
PC11606E (UNIXSnap) Already snapped %s
PC11607E (UNIXSnap) Error creating directory to mount snap
PC11608E (UNIXSnap) Error getting volume information
PC11609E (UNIXSnap) Device not found for mount point %s
PC11610E (UNIXSnap) Device not snap-able: %s
PC11611D (UNIXSnap) Device not snap-able: %s
Reason: Only file systems in LVM or which are of type btrfs are snappable by UPSTREAM. This file system will be backed up, but active, since a snap can't be done. This message should be expected for boot and other file systems, but if the system is something you want snapped, it should be changed to be in LVM or converted to btrfs.
PC11612E (UNIXSnap) Error while snapping a linux file system
PC11613E (UNIXSnap) Error while snapping a linux volume
PC11614E (UNIXSnap) Signal #%u reported during %s
PC11615E (UNIXSnap) Error during cleanup
PC11616E (UNIXSnap) Error starting command
PC11617E (UNIXSnap) Run command: %s, Error: %s
PC11618W (UNIXSnap) Return code #%u reported during %s
PC11619W (UNIXSnap) Error setting file information
PC11620W (UNIXSnap) Error getting attributes
PC11621W (UNIXSnap) Error setting attributes
PC11622W (UNIXSnap) Error closing for later reopen
PC11623W (UNIXSnap) Error determining if a file exists
PC11624W (UNIXSnap) Error getting extra data for directory
PC11625W (UNIXSnap) Error putting extra data for directory
PC11626W (UNIXSnap) Error getting real file name.
PC11627E (UNIXSnap) Error getting volume group
PC11628E (UNIXSnap) Error saving parameters:
PC11629D (UNIXSnap) Auto deletion after %u days
Reason: You specified USSNAPDELETEDAYS to use a value other than the default of 7.
PC11630I (UNIXSnap) Snap: %s using size: %s
NDMP Errors continued from 11599
PC12900E Parent %s can't create child tree for %s
PC12901E Child %s already added to parent tree %s
PC12902E Error adding child %s to parent %s
PC12903E Root not found for %s
PC12904E Node %s not found in %s
PC12905E Node %s detail not found for %s in %s
PC12906D Node %s detail not found for %s in %s in Incr
Reason: Displayed because LOGNONFATAL is turned on - expected on files/dirs that do not change.
PC12907E Unexpected function call %s
PC12908E Error creating received file tree.
PC12909E Error adding to received file tree.
PC12910E Error creating received list tree.
PC12911E Error adding to received list tree.
PC12912E Error creating restore specs tree
PC12913E Error adding to restore specs tree
PC12914E Data read request with one pending
PC12915I NDMP data request at byte #%s, for %s bytes
PC12916E Error setting spec %s %s
PC12917E Restore spec #%u not found for %s
PC12918E Error starting recover operation
PC12919E Error recovering block data
PC12920E Error recovering data
PC12921E Data socket closed unexpectedly during send
PC12922E Error sending data done
PC12923E Error: Past NOTIFY_DATA_READ offset %s, at %s
PC12924D Requesting %s files/dirs, %s bytes (total: %s files/dirs, %s bytes)
PC12925E Timed out waiting for data request
Reason: We waited a reasonable amount of time for the NDMP server to request data or close the connection and it didn't.
PC12926E Incr requested for FS: %s but not found in date file
Reason: You must do a full of a file system before you can do an incremental.
PC12927D DAR automatically enabled by partial restore of %s into %s
Reason: This is normal and can be ignored.
PC12928E Error initializing encryption
PC12929E Error encrypting
PC12930E Error initializing decryption
PC12931E Error decrypting profile %s
PC12932E Error allocating memory for versions tree
PC12933E No versions available for restore for this profile
PC12934E File spec %s is not found in the prior backups
Action: Specify a different profile or a different spec.
PC12935E Expected first spec entry not found
PC12936E Expected first version entry not found
PC12937I DAR (direct access restore) disabled by user request.
PC12938I Local port specified in use, using port #%u
PC12939D NDMP Profile %s not found - restoring
PC12940D Differential specified
Reason: A combined incremental back to the full will be performed. This may be slower than regular incrementals.
PC12941D Differential being performed
Reason: A combined incremental back to the full will be performed. This may be slower than regular incrementals and is required because you have reached the maximum incremental number.
PC12942D Differential found on version: %s
Reason: Since this is a non-DAR restore, prior incremtentals will be ignored.
Additional Generic Tape Access Errors
PC13275E Error while setting block size to write a label
PC13276E Error while setting block size after writing a label
PC13277E Tape status error 0x%x
PC13278E Error allocating memory
PC13279E (Linux) DRIVER_BUSY (driver status: 0x%x)
Reason: The device driver is too busy to service this request. The system did not recommend a retry.
Action: Update the device driver for this SCSI/Fibre card.
PC13280E (Linux) DRIVER_SOFT (driver status: 0x%x)
Reason: The device driver received a soft error from the device and the system did not recommend a retry.
Action: Check any system logs for the device.
PC13281E (Linux) DRIVER_MEDIA (driver status: 0x%x)
Reason: Media error. This media is defective.
Action: Replace the media at the next possible opportunity.
PC13282E (Linux) DRIVER_ERROR (driver status: 0x%x)
Reason: Generic device driver error.
Action: You may need to upgrade the device driver for the fibre/SCSI card.
PC13283E (Linux) DRIVER_INVALID (driver status: 0x%x)
Reason: Invalid function. Internal error.
Action: Call tech support.
PC13284E (Linux) DRIVER_TIMEOUT (driver status: 0x%x)
Action: Set the environment variable USDRIVETIMEOUT to increase it above the default 60 seconds, if there was not an error.
PC13285E (Linux) DRIVER_HARD (driver status: 0x%x)
Action: Check any system logs for the device.
PC13286E (Linux) Unknown driver error (driver status: 0x%x)
Action: Call tech support.
PC13287D Tape drive: %s needs cleaning
PC13288E (Solaris) Unexpected SCSI command: 0x%x
Action: Call tech support
PC13289E (Linux) Sense buffer output
PC13290E (Linux) Unexpected SCSI command 0x%x
Reason: Internal error.
Action: Call tech support.
Tree Tuning Notification
PC14275I USTREEALIGN set
Reason: This will cause UPSTREAM to align trees on 8 byte boundaries
PC14276I USTREENOALIGN set
Reason: This will cause UPSTREAM to not align trees on 8 byte boundaries
PC14277D USTREEBLOCKSIZE out of boundary; will not be used
Reason: Block size must be greater than 1024 bytes
PC14278I USTREEBLOCKSIZE set to %u
PC14279D USTREEFORESTSIZE out of boundary; will not be used
Reason: Forest size must be greater than 1024 bytes
PC14280I USTREEFORESTSIZE set to %u
Additional Tape Errors.
PC14350E When seeking to block %u reach end of data at block %u
Reason: This tape may be corrupt. You may need to get your files from a different backup.
Action: Contact FDR/UPSTREAM Tech Support.
PC14351E Tape not moving from block #%u - usually end of medium
Action: Validate other data on this tape. There may be corruption. If the data is unneeded, the easiest fix is to delete all data on the tape and start over.
PC14352D Error getting tape drive information.
Additional Tape Access Errors.
PC14450E Error reserving the tape drive.
PC14451E Error opening tape drive.
PC14452D Error #%u testing if drive is writable
PC14453D Error reading existing tape drive info
PC14454I Tape drive info for %s
PC14455D Error setting tape drive info
PC14456I Set tape info for %s
PC14457I Set tape env. variable %s to %s
Optimizer Errors
PC14800D ioOptimizer component warning.
PC14801E ioOptimizer component error.
PC14802E ioOptimizer warning.
Reason: ioOptimizer doesn't support segmentation. Optimization disabled.
PC14803I ioOptimizer component information.