Windows Device Management steps
This class groups all steps that are available for the management of all peripheral devices managed under Windows.
Create Device Management Rule
This step creates a management rule for a given peripheral device class. It is strongly recommended to not define rules for more than one device class per operational rule, that is, an operational rule for the scanners, another for the printers, etc.
Parameter | Description |
---|---|
Authorize | Defines if the selected device class is to be authorized of forbidden. |
Filter Type | Defines according to which system the peripheral devices are to be filtered for activation/deactivation. |
Filter | Enter the filter according to the above selected filter type. The possibilities are:
|
Filtered Field | Select from this list of available fields the one to be filtered. |
Class Type | Defines for which type of peripheral device the step is to be defined, for example, USB HUB, USB Scanners, USB Storage Devices , etc. |
Disable USB Storage Write Access
This step disables write access to all peripheral USB storage devices that are either already connected to the devices in your network or that will be connected in the future. Once connected, these devices can be accessed in read mode only.
No parameters need to be defined for this step.
Disable WiFi for LAN Connection
This step disables all WiFi connections which are established for a device.
No parameters need to be defined for this step.
Disable Windows Burning Service
This step disables the built-in Windows' CD-ROM burning service.
No parameters need to be defined for this step.
Enable USB Storage Write Access
This step enables the usage of all currently connected peripheral USB storage mediums. This also enables any storage medium connected after the execution of the step.
No parameters need to be defined for this step.
Enable Windows Burning Service
This step allows you to enable the built-in Windows' CD-ROM burning service.
No parameters need to be defined for this step.
Reset Device Management Rule
This step allows you to cancel all existing management rules for a specific Windows peripheral device class.
Parameter | Description |
---|---|
Class Type | Select the class of peripheral devices for which all existing rules are to be cancelled, for example, for all USB HUBs, USB Scanners, USB Storage Devices, etc. |
Wifi Status Verification
This step, executed during the verification phase, checks the Wifi connection status. If the connection is active it will stop with an error. If the LAN is enabled in addition to the Wifi the verification will fail depending on the setting of the parameter. The step is used, for example, to stop/forbid package downloads if a device uses a Wifi connection.
Parameter | Description |
---|---|
Do not stop on error if the LAN is active in addition to the Wifi | Check this box if the verification is not to fail if the LAN connection is also active. For a package download, for example, this would mean that it is allowed. |
Comments
Log in or register to comment.