Static Relay parameters
This mechanism is the simplest one. The mechanism will exit if no parent name is configured. In this case, subsequent mechanisms configured in the sequence would be tried. The static mechanism represents the static mode capabilities offered to the dynamic mode. Having such a mechanism can be interesting since users may decide to revert back to a static configuration if none of the configured dynamic mechanisms succeed.
Parameter |
Description |
---|---|
Static Parent Name |
The name of the direct parent to which the target device is to be connected in static mode. This value is ignored if the dynamic relay selection is activated, that is, at least one value is entered in the Mechanism List field. The direct parent is either the master or the new device's relay on the next higher level. The name may be entered as the short or long network name, that is, scotty or scotty.enterprise.com or as its IP address in dotted notation, that is, 192.168.1.1 or 2001:db8:85a3::8a2e:370:7334 . You may also select the parent from the list of available devices by clicking the Add Device icon and selecting the desired parent from the appearing list. |
Static Parent Port |
The port number of the direct parent to which the device is connected in static mode. This value is ignored if the dynamic relay selection is activated, that is, at least one value is entered in the Mechanism List field. |
Comments
Log in or register to comment.