Adding targets via an address range
You can also add one or more devices by typing their name or address.
Note
When you specify an address range with IPv6 addresses be careful to not add complete subnets, as these are very large and take very long to complete.
- Click Add Existing Device
.
The Add a Device dialog box appears on the screen. - Enter the name of the device to be added to the list into the respective field. The name can be entered
- Either as its short or long network name, for example,
scottyorscotty.enterprise.comor as its IP address, IPv4 or IPv6, for example,159.124.5.10or2001:0db8:85a3:0000:0000:8a2e:0370:7334, - Or as a comma separated list of names or ranges, for example,
scotty; 192.168.4.45-192.168.4.47; 2001:0db8:85a3:0000:0000:8a2e:0370:7334which includes computersscotty.enterprise.com,192.168.4.45, 192.168.4.46,192.168.4.47and2001:0db8:85a3:0000:0000:8a2e:0370:7334. - A range can also be entered as CIDR notation in the form of
192.9.205.22/18or2001:0db8:85a3:0000:0000:8a2e:0370:218/733.
- Either as its short or long network name, for example,
- Click OK to add the device and close the window.
Was this page helpful? Yes No
Submitting...
Thank you
Comments
Log in or register to comment.