CDP worksheet for upgrades from 7.6.03

You can upgrade the configuration distribution peer (CDP) after you upgrade or install the repository. If you are using an external Remedy Single Sign-On instance, it must already be installed.

You can upgrade the optional BMC Atrium Orchestrator Operator Control Panel (OCP), with the CDP. To upgrade the OCP with the CDP, use the Operator Control Panel worksheet for upgrades from 7.6.03 worksheet with the CDP upgrade worksheet.

Note

If you are installing a non-English version of the Operator Control Panel, you must install it separately from the CDP. You must install the non-English OCP and CDP on separate Tomcat servers.

If you choose to modify any settings during the CDP upgrade, use this worksheet to record the new settings. The upgrade parameters in the table correspond to the parameters in the GUI upgrade panels and the options file.

Upgrade Feature Selection panel

Parameter	Default value and notes	Your value
Configuration Distribution Peer	Configuration Distribution Peer
Operator Control Panel	You can also select Operator Control Panel

Root Directory Selection panel

Parameter	Default value and notes	Your value
Destination Directory	Click Browse to navigate to the directory where the CDP is installed.

Authentication panel

Parameter

Default value and notes

Your value

Install Embedded Remedy SSO
and
Cookie Domain

or

Use External Remedy SSO
and
Remedy SSO URL
Remedy SSO Realm
Admin Password

Select your authentication option and provide the required information to use it.

Embedded Remedy SSO (the authentication service is installed with the CDP).
and
Cookie Domain: Provide the cookie domain (see Installing Remedy Single Sign-On for more information).

or
External Remedy SSO (this will be the Remedy SSO instance embedded on the repository or the external Remedy SSO that you specified during the repository installation or upgrade).
and
Remedy SSO URL: Provide the external Remedy SSO URL in the following format:
https://<hostname>:<port>
For example:
- If using an external Remedy SSO server with the name external-rsso.mydomain, the URL is similar to the following:
  https://external-rsso.mydomain:8080
- If using an embedded Remedy SSO on a repository server with the name bao-repository.mydomain, the URL is similar to the following:
  https://bao-repository.mydomain:28080

Remedy SSO Realm: Provide the name of the realm on the external Remedy SSO.
If you are using the embedded Remedy SSO on the repository, the realm used by BAO is BAOLocal.

Admin Password: Enter the Admin password to log into the external RSSO instance.

Connection Details panel

Panel name and setting	Default value and notes	Your value
Repository Host Name	Fully qualified domain name of the host where the repository is installed.
Admin Password	Password required to log on to the repository.
Web Server Host Name	Fully qualified domain name of the host where the CDP is installed.
Repository HA Address	Provide the repository IP address and port for communication with the enterprise service bus. Use the following format: <IPaddress>:<port> On a machine that has multiple network interface cards (NICs) this must be the IP address that allows access from the CDP and/or the HA-CDP. The default port is the repository web port plus 10. For example, if the repository port is 28080, the Repository HA address is 28090. Notes This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP. Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.
CDP HA Address	Provide the CDP IP address and port for communication with the enterprise service bus. Use the following format: <IPaddress>:<port> On a machine that has multiple network interface cards (NICs) this must be an IP address that allows access from the repository and/or the HA-CDP. The default port is the CDP web port plus 10. For example, if the CDP port is 38080, the CDP HA address is 38090. Notes This entry is required for installations/upgrades with embedded RSSO installations. This is not applicable if you are using external RSSO on the CDP. Often multiple IP addresses are detected by the installer (on a machine that has multiple NICs). Verify the default address and port number and replace them if required.

CDP Server Auto Start panel

Parameter	Default value and notes	Your value
Do you want to start the server after the installation	Yes

Installation Choices Summary panel

Parameter	Default value and notes	Your value
Copy Text to Clipboard	Before you install/upgrade the CDP successfully, you can copy the peer connection details to a clipboard for further use.